Discontinued

Discontinued items that we no longer stock... give us a shout if you see something you need and we'll see if we are able to restock them. Email [email protected] Please include the link to the item.
Sort By:  
This case brings together the Raspberry Pi, and IQAudio Pi-DAC+ Audio Board into one simple, neat package.
R150.31  Inc VAT
Discontinued: Machifit Outer Diameter 8mm x 500mm Cylinder Linear Rail/Shaft for CNC (AW 2D4 Rail 8x500mm)
Specifications:
MaterialBearing steel, GCr15
HardnessAbout HRC62°
Precisiong6 h6
Surface roughnessBelow 1.5uM
Surface hard-thickness0.8μ~3mm
Outer diameter8mm
Length500mm
StraightnessBelow 5μM/100mm
Hard chrome thickness3.0μM(Rmax)
ColorSilver
quantity1pcs

Features:
Surface is smooth.
Durable and easy to install.

 
Package includes:
1 X Linear Optical Axis
R157.90  Inc VAT
Discontinued: Hackable "Naked" 7 Port USB Hub UK 5V 2.5A (WA 3B6 hackable usb hub)

Want to integrate a 7 port USB hub into your Raspberry Pi project, but don't want to rip one out of a pretty plastic case? Don't worry! We've got our hands on some stripped down, "naked" USB hubs which work great with the Raspberry Pi!

They have some pretty special features too. . . . . 

  1. Fully tested for compatibility - plug and play!
  2. PCB footprint is very close to the Raspberry Pi - 6mm overlap on length & width
  3. Each hub is able to sufficiently back-power a Raspberry Pi Model B. 
  4. If you don't want to back-power your Pi, it is very easy to modify this hub to stop - Tutorial below.
  5. Each hub includes a 5V 2.5A UK power supply (EU & US adaptors available)
  6. Each hub includes a 0.5m USB A to Mini B cable.
  7. We've drilled some M3 holes for mounting (in addition to the M1 corner snaps)
  8. There's no solder mask (so you can hack it all you want!)
  9. They're also white, which is sexy!
  10. Mark Peason created a 3D Printable Case for the Naked Hub!
  11. Paul Kersey-Smith created a Laser Cut Case for the Naked Hub & Pi!

Please Note

  • This hub is sold for development purposes only
  • This hub must be connected to your Raspberry Pi at boot
  • This hub comes with NO warranty once modified

Technical Specification

  • Fully CE Approved Hub
  • 7 Port USB hub
  • 3.5A over-current protection on board
  • 1.2A max draw per USB port
  • Supports USB 2.0
  • Includes 0.5m USB Data Cable
  • Includes 5V 2.5A UK Barrel Jack Power Supply - 3.5mm OD x 1.35mm ID
  • EU adapter included
  • Dimensions: 95mm x 73mm x 14mm
  • M3 Mounting Holes

How to Modify Hub Back-Power Capability

Back-powering on the Raspberry Pi is the mode of powering your Raspberry Pi via the 5V line on a USB port (as opposed to the Micro USB power port). This is a very effective way of reducing clutter when using a USB hub with your Raspberry Pi, as it essentially means you do not require a separate power supply for the Pi itself.

All Raspberry Pi's after the Model 1B+ DO NOT allow back-powering

If you don't want your Naked hub to back-power your Raspberry Pi then you need to short the 5V line from the hub somehow. You can modify your cable (just snip the 5V line) or the hub! We've modified the hub below:

 

Get a pair of needle nose cutters and snip the Vcc line as denoted above (be careful of the other lines!)

That's it - break the circuit from the Mini USB port and you're done - no more back-powering!

R134.90  Inc VAT
Discontinued: 10mm Bore Diameter Zinc Alloy Pillow Block Mounted Ball Bearing KP000 (AW 2D3 10mm mounted bearing)
Specifications:
Type:Pillow Block
Material: Zinc Alloy
Model: KP000
Bore Diameter: 10mm
Total Size: Approx. 67x18x35mm(L W H)
Hole Diameter: Approx. 7mm
Holes Centre Distance: Approx. 53mm
 
Features:
Easy to install.
Durable with high precision.
Can withstand great weight.
Angle between the inner bearing and outer fixing ring is adjustable.
Pillow Block Bearing is widely used in various of machinery, such as machinery and equipment, conveyors, machine manufacturing, ect.
 

Package Includes:
1 x Pillow Block Bearing
R69.61  Inc VAT
Discontinued: 5mm x 10mm Aluminum Flexible Shaft Coupling OD19mm x L25mm CNC Stepper Motor Coupler (AW 3D3 Flex coupler 5 to 10mm)
Specifications:
Type:Flexible Shaft Coupling
Material: Aluminium
Size: 5mm x 10mm.
Outside Diameter:19mm
Length:25mm.
Color:Silver
Main dimensions: d1=5mm,d2=10mm,D=19mm,L=25mm
5mm x 10mm Aluminum Flexible Shaft Coupling OD19mm x L25mm CNC Stepper Motor Coupler Connector
 
Features:
1) The structure is simple,easy to install,buffer,damping,convenient to disconnect.
3) The flexible connection can absorb vibration, compensate radial, angular and axial misalignment.
5)Shaft coupler Often used to connect servo motor, stepper motor,encoder screw driving machine platform etc.
 
Note: 
The size refers to the hole,for example 8mm x 10mm is known as one head of the hole diameter is 8mm,the other is 10mm
 
Package Includes:
1x Flexible Shaft Coupling
R40.25  Inc VAT
Discontinued: 300mm Ball Screw C7-1605 Ballscrew with Nut for CNC (AW 2D4 300mm screw ball nut)
The ball screw nut is the ideal driving device for rotary motion and linear movement.
Its structure is characterized by a screw groove with a screw nut with a ball (as
intermediate transmission element), to reduce friction.
 
Specifications:
300mm Ball Screw C7-1605 Ballscrew
Material: Bearing steel
Color: silver
Size: 30.5x 1cm
Diameter: 1.7cm
 
Features:
1.Rolling ball precision, greatly reducing the friction resistance.
2.Rotary motion and linear movement are converted to each
other, and the steel ball is used as a rolling medium.
3.Durable, long service life.
 
Package Includes:
1 x Ball Screw
R674.87  Inc VAT
Discontinued: Machifit 150mm Slide Stroke Mini CNC Z Axis Linear Motion with Stepper Motor (AW 2D2 z axis stepper 150mm)
Specifications:
MaterialStainless steel
Slide Stroke150mm
Fixed SeatM3
Pitch2mm
Voltage12V
Current1.7A


150mm Slide Stroke Z Axis Mini CNC Linear Motion Milling Engraving Machine
 
Package Included:
1 x CNC Z Axis Slide (with a stepper motor)
R1,429.90  Inc VAT
Discontinued: NodeMcu Lua ESP8266 ESP-12E + WiFi Motor Drive Expansion Board (AW ESP-12E + WiFi Motor Drive)
Note:

This NodeMcu Lua module, is dedicated to the wifi smart car, which means this module have a special program loaded for the wifi smart car

Software: http://bbs.smartarduino.com/showthread.php?tid=2043&pid=2213#pid2213

A very handy link on how to use it

Features:


ESP12 DEV KIT development board expansion module;
ESP12 DEV KIT leads all function pins: SPI, UART, GPIO, AI and 3.3V power connector;
Expand two-way motor-driven, two-way direct drive motor;
Onboard power switch;
Motor Power range: 4.5V ~ 36V;
Control power range: 4.5V ~ 9V;
Motor power, control power separation; In the experiment, by short-circuiting block the merger, the VIN and VM short, while power supply to the motor and the control board.

Note:

When you insert ESP-12E module, please note the direction consistent with the expansion board antenna;
The use of Short circuit module that can simultaneously control board and the electrical power supply

Package includeds:

1 x (Wifi Car Dedicated) NodeMcu Lua ESP8266 ESP-12E
1 x WiFi Motor Drive Expansion Board
R169.90  Inc VAT
Discontinued: IQAudio Pi-DAC+ Case for Pi 2 B and Pi 3 B (Clear) (AW C3 Pi-DAC+ clear case)

Raspberry Pi and Pi-DAC+ boards not included

We're pleased to annouce the release of ModMyPi's Pi-DAC+ Case. Specially manufacturer in the UK, this case brings together the Raspberry Pi, and Pi-DAC+ Audio Board into one simple, neat package. Designed to be stylish and functional, the Pi-DAC+ Case enables access for all Pi-DAC+ and Raspberry Pi Ports whilst keeping both boards safe and sound!

The Pi-DAC+ Case Features:

  • Laser Cut Acrylic
  • Easy Assemble Case
  • Manufactured in the UK
  • GPIO Slot
  • Enables Access to all Raspberry Pi & Pi-DAC+ Ports
  • Available in Matt Black or Clear
  • Compatible with the Raspberry Pi 3 Model B, Pi 2 Model B, Raspberry Pi B+ & A+

Pi-DAC+ Case Assembly Guide

R140.22  Inc VAT
Discontinued: DIY Two Wheel Drive Round Double-Deck Smart Robot Chassis Kit (AW 1D2 round robot kit)
Specifications:

Plate material: Acrylic
Round plate diameter: 130mm
Square plate size: 130 x 95mm
Wheel diameter: 65mm
Finished size: 130 x 150 x 68mm (L x W x H)

Note: This is a DIY kit, you need to assembling it. No instructions supplied.

Package includes:

1 x Round Acrylic Plate
1 x Square Acrylic Plate
2 x Wheels
1 x Universal Wheel
2 x Gear Motors
4 x "T" Mode Fixed Motor Brackets
1 x Screw And Nuts Set

Read the Docs
R249.90  Inc VAT
Discontinued: 2.54mm Pitch DIL Header 90angle 40 PIN(2x20) Black (AW 2x20 DIL m2m header angle)
2x20 pin double row header male to male 90 degree angle

Ideal for:
  • Pi Zero
  • Electronic projects
  • Printed circuit boards
R19.17  Inc VAT
Discontinued: Nylon Slotted cheese head screws,spacers and nuts M2.5x20 (AW NylonScrewM2.5x20+spacer+nut 4pack)
Pic is for illustration purposes only

  • M2.5x20 slotted cheese head screws,spacers and nuts
  • Nylon
  • Fits through the mounting holes on the RPi board


Package Includes:
4 x screws M2.5x20
4 x spacers 3.2mm ID, 6mm OD, 5mm long
4 x nuts M2.5
R16.64  Inc VAT
Discontinued: 10A 250V 3Pin IEC320 C14 black Inlet Switch Male Power Socket (AW kettle black socket switch)
Specifications:

- Material (External): Plastic, Metal
- Button Color: Black/Red
- Rocker Switch Rating Voltage: 10A 250V AC
- Hole in Top Face Diameter : 0.42cm / 0.16"
- Hole Center Distance : 3.9cm / 1.5"
- Bottom Size : 4.7 x 2.7cm / 1.9" x 1.1"(L*W)
- Total Size : 5.8 x 4.8 x 3.4cm / 2.3" x 1.9" x 1.3"(L*W*H)
- Use only with a 250V supply


Package includes:

1 x IEC320 C14 Power Socket With Switch Fuse
R45.39  Inc VAT
Discontinued: IQAudio Pi-DAC+ Case for Pi 2 B and Pi 3 B (Matte Black) (AW C3 Pi-DAC+ black case)

Raspberry Pi and Pi-DAC+ boards not included

We're pleased to annouce the release of ModMyPi's Pi-DAC+ Case. Specially manufacturer in the UK, this case brings together the Raspberry Pi, and Pi-DAC+ Audio Board into one simple, neat package. Designed to be stylish and functional, the Pi-DAC+ Case enables access for all Pi-DAC+ and Raspberry Pi Ports whilst keeping both boards safe and sound!

The Pi-DAC+ Case Features:

  • Laser Cut Acrylic
  • Easy Assemble Case
  • Manufactured in the UK
  • GPIO Slot
  • Enables Access to all Raspberry Pi & Pi-DAC+ Ports
  • Available in Matt Black or Clear
  • Compatible with the Raspberry Pi 3 Model B, Pi 2 Model B, Raspberry Pi B+ & A+

Pi-DAC+ Case Assembly Guide

This case brings together the Raspberry Pi, and IQAudio Pi-DAC+ Audio Board into one simple, neat package.
R150.31  Inc VAT
Official Raspberry Pi 2 Red & White Case (AW C4 official case Pi2)

PLEASE NOTE: This case is for the Pi2 and not the Pi3

The Official Raspberry Pi Foundation's Raspberry Pi Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to to protect both the Pi B+ and Pi 2 B! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Designed by Kinneur Dufort you can read all about the design process from the Raspberry Pi Foundation's blog here

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Red and White Colour Combination

  • 5 Part "Snap-Fit" Enclosure

  • Cut-outs for all connection points

  • Micro SD card cut-out

  • Plastic LED light protector

  • Stick on rubber feet for case stability

R49.90  Inc VAT
Discontinued: 600mm SFU1605 Ball Screw with Ballnut for CNC (AW 2D3 600mm ball screw)
Specifications:
Model: SFU1605
Material:Bearing steel
Accuracy: C7
Length: 60cm
Nut diameter:12mm
Gain per 1 revolution:3mm
Stiffness: 17
Basic Dynamic Rating Load (Kgf): 765
Basic Static Rating Load (Kgf): 1204
Weight: 918g
Color: Sliver
 
Features:
Resistant to wear and tear, greatly extending the life cycle of the ball screw.
High temperatures proof in harsh environments without distortion to ensure stability.
 
Package Includes:
1 X Ball Screw
1 X Nut
R806.01  Inc VAT
Discontinued: 2pcs BK12 BF12 Ball Screw End Supports for Ball Screw SFU1605 CNC (AW 2D3 ball screw ends bk12bf12)
Description:
2pcs BK12 BF12 Ball Screw End Supports for Ball Screw SFU1605 CNC XYZ Parts

Support units such as BK type bearing into the proper amount of lithium soap grease, with special sealing gasket.
 
Specifications:
Size: 60 x 25 x 33mm (BK)/ 60 x 20 x 33mm (BF)
Material: carbon steel

Pack of 2
R503.38  Inc VAT
Discontinued: Solder Wire 1mm 17gr - Dispenser (AW 17g solder dispenser)

Specifications

  • weight: 17g
  • 1.0mm
  • remark: tube
  • 60% Sn - 40% Pb
  • with resin core
  • melting point: 185C
R40.34  Inc VAT
Discontinued: 750mm SFU1605 Ball Screw with BK12 BF12 Supports and 6.35x10mm Coupler for CNC (AW 2D2 750mm ball screw kit)

Specifications:

ModelSFU1605
MaterialStainless steel
Length750mm
Size of coupler23*34mm
Diameter of coupler hole
6.35*10mm
Basic dynamic rating load (kgf)765
Basic static rating load (kgf)1320
 
Features:
-High transmission efficiency, high positioning accuracy and repeat ability of positioning accuracy, long life, high stiffness,
drive transmission reversibility.
-Fused with shiny surface matching with high precision. More resistant to wear and tear, greatly extending the life cycle of
the ball screw.
 
Package Includes:
1 x SFU1605-750mm Ball Screw
2 x BK/BF12 Support
1 x 6.35x10mm Coupler
1 x Locknut
1 x Circlip
R1,441.54  Inc VAT
Discontinued: 500mm SFU1605 Ball Screw with BK12 BF12 Supports and 6.35x10mm Coupler for CNC (AW 500mm ball screw kit)
Description:
500mm SFU1605 Ball Screw with BK12 BF12 Supports and Coupler for CNC

Specifications:

ModelSFU1605
MaterialBearing steel
Nut diameter12mm
Length ball screw500mm
Effective distance(unprocessed)440mm
Size of supporting seat60/35*32*25mm
Size of coupler23*24mm
Diameter of coupler hole6.35*10mm
Basic dynamic rating load (kgf)765
Basic static rating load (kgf)1204
 
Features:
-Fused with shiny surface matching with high precision.
-more resistant to wear and tear, greatly extending the life cycle of the ball screw.
-high temperatures in harsh environments without distortion to ensure stability.
-smoother curve ball screw drive design works more smooth and natural.
 
Package Includes:
1x ball screw
1x coupler
1x screw
2x supporting seat BK+BF12
R1,411.27  Inc VAT
Discontinued: GPS SMA Antenna 3 to 5V 28dB 5m (External, Active) (AW 1A4 GPS Antenna)
Give your Raspberry Pi Ultimate GPS Project a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. The connecting cable is 5m long so it will easily reach wherever you need it to. The antenna is also magnetic so it will stick to the top of a car or truck (or any other steel structure)!
 
This Antenna is designed to be used with the following products:
 
  • GPS SMA to uFL Adaptor Cable
  • Ultimate GPS Breakout Board
  • GPS HAT Mini
  • GPS Logger Shield
  • 28dB Active External Antenna
Comes with a standard SMA connector on the end. If you want to connect to our Ultimate GPS V3 module, be sure to pick up a uFL to SMA adapter! 
 
The GPS SMA Antenna Features:
  • Gain 28 dB
  • Operating Frequency 1575.42MHz ± 1.023MHz (T1)
  • Output Impedance 50 ohms
  • Bandwidth 10 MHz minute @ S11 ≤ -10dB
  • Output VSWR 2.0 Max
  • Voltage 2.3~5.5V
  • Dimensions: L 41.2xW38.5xH13.3 mm
  • Mount: Magnetic Antenna
  • Coaxial Cable: RG174 Length 5m
  • Cable Connector: SMA MALE
  • Operating Temperature: -30°C to +85°C
R291.54  Inc VAT
Per Page      61 - 80 of 182