Discontinued

Discontinued items that we no longer stock... give us a shout if you see something you need and we'll see if we are able to restock them. Email [email protected] Please include the link to the item.
Sort By:  
The PiOT relay board allows you to bond a GPIO pin to a relay with the touch of a button.
R516.87  Inc VAT
Automation HAT's little bro'. The most compact way to take control of and monitor your world!
R209.90  Inc VAT
Hi Google. What is the temperature forecast for today?
R639.90  Inc VAT
RetroPie allows you to re-play a variety of videogame consoles and platforms in your living room, with ease! RetroPie is free, open source and designed to let you create your very own arcade in no time using Raspberry Pi.
R1,092.09  Inc VAT
This is a NES inspired enclosure for your Raspberry Pi system. It can turn your bare Raspberry Pi PCB into an elaborate gaming console.
R429.90  Inc VAT
Discontinued: Picade HAT + Parts Kit (AW Picade HAT & parts kit)

Turn your Raspberry Pi into a retro games console! Picade HAT includes joystick and button inputs, a 3W I2S DAC/amplifier, and soft power switch. Nice!

We've taken all the great features of the Picade PCB and crammed them onto this super HAT. Simply plug it onto top of your Pi, wire up your controls, and install our driver! It's ideal for your own custom arcade builds or interfaces that need big colourful buttons and sound.

Features

  • I2S audio DAC with 3W amplifier (mono) + speaker
  • Safe power on/off system
  • 4-way digital joystick inputs
  • 6 x game button inputs
  • 4 x utility button inputs
  • 1 x soft power switch input
  • Breakout pins for other GPIO features

The I2S DAC blends both channels of digital audio from the Raspberry Pi into a single mono output. This is then passed through a 3W amplifier to power any connected speaker.

The board also features a soft power switch that allows you turn your Pi on and off safely without risk of SD card corruption. Simply tap the connected button to start up then tap it again to fully shutdown and disconnect power.



R634.52  Inc VAT
Discontinued: HiFiBerry Digi+ I/O (AW C3 hifiberry Digi+ I/O)

HiFiBerry Digi is a high-quality S/PDIF card for the Raspberry Pi. It uses the I2S sound port that connects directly to the CPU without the need for an additional USB conversion. It does not only feature an output (optical and electrical), but also inputs (both optical and electrical).

If you need a case for the HiFiBerry Digi+, check out the HighPi Case

Features

  • Dedicated S/PDIF interface chip supports up to 192kHz/24bit resolution
  • Optical (Toslink) and electrical outputs
  • Bit-perfect output, audio data stream will not be modified in any way
  • Connects directly to the Raspberry Pi, no additional cables needed
  • No soldering. The Digi+ comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi B+. The board conform to the Raspberry Pi hardware-attached-on-top (HAT) specification. That means it perfectly fits your Raspberry Pi B+.
  • Directly powered from the Raspberry Pi, no additional power supply
  • Optional: high-bandwidth output transformer provides full galvanic isolation of the electrical output (not in the standard version)
  • Integrated EEPROM for automatic configuration (with write-protection).
  • Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi.

Important note: While the hardware is able to output DTS/Dolby Digital, software has to be adapted to support this. We will support the developers to implement this. Unfortunately we can’t guarantee that this feature will work with a specific software. Please ask the developers of the software if this is supported.

R906.89  Inc VAT
Discontinued: 1000 Pcs 1/4w 2.2Ω~2.2MΩ Carbon Film Resistor 50 Value Assortment Kit (AW C2 1000 Resistor Kit )
Specifications:

Power: 1/4W
Range: 2.2Ω~2.2MΩ
Tolerance: ±5%
Size of resistor: L*W/8*2mm/0.31*0.07inch
Value: 50 types
Quantity: 1000Pcs (20Pcs of each type)

Resources:

Resistors basics
Types of Resistors
Resistor colour codes


Package includes:

1000 x Resistors

1000 Pcs 1/4w 2.2Ω~2.2MΩ Carbon Film Resistor 50 Value Assortment Kit
R129.90  Inc VAT
Discontinued: 3-Pin Power Control Micro Switches(pack of 2 units) (AW 1A5 micro switch flat arm)
ColorBlack + white + siliver
MaterialPlastic + copper + iron
FeaturesCurrent: 0.1A; Voltage: DC 30V
ApplicationGreat for DIY projects and robotics. Use for collision detection in robotics
Packing List2 x Micro switches


Resources:

Python library
Introduction to Buttons and Switches
Types of buttons and switches

R10.09  Inc VAT
Discontinued: Automatic Electric Water Bilge Pump Switch Sensor (AW bilge pump float switch)
Description:

Our bilge pump float switch is safer than mercury switches, this switch utilizes a mercury-free rolling ball mechanism and includes an exclusive anti-spike feature to prevent the rapid on/off cycling encountered with some switches. Made of rugged thermoplastic. Universal design works with all 12V, 24V and 32V bilge pumps.

A bilge pump float switch is a smart device used in boats that turns on a bilge pump when the water in the bilge reaches a certain level. It is a must-have in any boat that is left unattended for any length of time, as all boats tend to leak at least some water. This switch is submerged, so you need to waterproof the electrical connections and hang the wires to ensure they stay as dry as possible.
 
Features:
 
1. Turn pump on when water level reaches 2 (51mm).
2. Turn pump off when water level reaches 3/4 (19mm).
3. Ideal flow sensor for bilge pumps.
4. Heavy duty flow switch is designed for the toughest applications.

Product NameBilge Pump Float Switch MK-CFS12
Max Amps 12volts30A
Max Amps 24 volts15A
Max Amps 32 volts12A
Wire length1m
Wire gauge size18
N.W/N.W0.16/0.2

Package includes:

1 x Automatic Float Switch 
R289.90  Inc VAT
Discontinued: Geekcreit® 16 In 1 Sensor Module Kit (AW C1 16 Sensor kit)
Package includes:

1 x DHT11 temperature and humidity sensor module
1 x HC-SR501 human infrared sensor module
1 x DS1307 real-time clock module (CR2032 battery not included)
1 x Rain sensor module
1 x Sound sensor module
1 x HC-SR04 ultrasonic sensor module
1 x Flame sensor module
1 x KY-008 laser sensor module
1 x Photoresistor sensor module
1 x YL-69 soil moisture sensor module
1 x Obstacle avoidance sensor module
1 x Shock sensor module
1 x MQ-2 gas sensor module
1 x 315M wireless transceiver module
1 x Tilt sensor module
1 x One channel TCRT5000 tracing module


KY-008 laser sensor module:


Operating voltage: 5V
Specifications: 15 * 24 mm
Light source wavelength: 650 nm
Weight: 2.2 g

Obstacle avoidance sensor module:

VCC: 3.3V-5V external voltage (can be directly connected to the 5v and 3.3v microcontroller MCU)
GND: External GND
OUT: Small board digital output interface (0 and 1)
Connection method: VCC-VCC; GND-GND; OUT-IO
Board size: 3.2 x 1.4cm

Flame sensor module:

Operating voltage: 3.3V-5V
Output form: DO digital switching output (0 and 1) and AO analog voltage output
Size: 3.2cm x 1.4cm
Detect flame or wavelength range (approx): 760 nm to 1100 nm, lighter flame test distance is 80cm, the greater flame, the farther test distance
Detection angle is about 60 degree, particularly sensitive to flame photometry
Adjustable sensitivity

315M wireless transceiver module:

Operating voltage: DC5V
Quiescent current: 4Ma
Receiving frequency: 315MHz
Receiving sensitivity: -105DB
Size: 30 x 14 x 7mm

Emission head parameters:
Transmission distance: 20-200 meter (different voltage, different effect)
Operating voltage: 3.5-12V
Dimension: 19 x 19mm
Work: AM
Transfer rate: 4KB / S
Transmitting power: 10mW
Transmission frequency: 315M
Pinout left → right: (DATA, VCC, GND)

One channel TCRT5000 tracing module:

Detection distance: about 10mm
Operating voltage: 5V, black line output low level, white line output high level

Shock sensor module:

Operating voltage: 3.3V-5V
Output type: Digital switching output (0 and 1)
Small PCB board size: 3.2cm x 1.4cm

MQ-2 gas sensor module:

Dimension: 32 x 22 x 27mm (L x W x H)
The main chip: LM393, ZYMQ-2 gas sensor
Operating voltage: 5V DC
Dual signal output (analog output, and TTL level output)
TTL output valid signal is low level. (When the output low level signal light can be directly connected microcontroller)
Analog output: 0 ~ 5V voltage, the higher the concentration the higher the voltage.

Sound sensor module:

Operating voltage: 3.3V-5V
Small PCB board size: 3.4cm x 1.6cm

DHT11 temperature and humidity sensor module:

VDD: 3.3-5.5V DC
DATA: Serial data
NC: No connection
GND: Grounding, negative power supply

HC-SR04 ultrasonic sensor module:

Operating voltage: 5V
Ultra-small quiescent current: less than 2mA
Induction angle: not more than 15 degrees
Detection distance: 2cm-400cm
High precision: up to 0.3cm

Useful Arduino starter guide

R309.90  Inc VAT
Discontinued: RPi 3 Paddle Breakout Kit (AW 1B2 GPIO paddle breakout kit)

The ModMyPi Raspberry Pi 3 Paddle Breakout Kit enables you to bring the Raspberry Pi B+/2/3 GPIO out from your Raspberry Pi to a 'push wire' paddle terminal board! This kit requires absolutely no soldering, but will allow you to jump straight from the Pi to your project or breadboard without the use of a cobbler kit. All terminals are labelled on the PCB silkscreen and the kit includes a GPIO Ribbon cable.

The 'push wire' terminals can be utilised with solid core wire stripped to around 10mm of exposed copper.

The GPIO Paddle Board Breakout Kit Features:

  • Included 40 Pin GPIO Ribbon Cable
  • Included Cobbler Printed Circuit Board (PCB)
  • Fully Labelled Silkscreen for Easy Identification
  • Push Wire Terminals for Quick & Easy Connections

This kit comes pre assembled so no soldering is required!

R190.66  Inc VAT
Discontinued: ModMyPi PiOT Relay Board (AW 2A3 MMP PiOT relay board)

Raspberry Pi board not included

The ModMyPi PiOT (Pi of Things) relay board is smart! Not quite Skynet smart, so you can tell John Connor to stay at home and play with his Raspberry Pi. But it's much smarter than your average relay board! We've created a Raspberry Pi Relay Board that does away with the complicated wiring and fiddly jumper configuration of your standard relay board, and bundles that control into an on-board PIC, making configuration faster, easier and safer. The PiOT relay board can be connected directly on top of the Pi, or via a GPIO ribbon cable (not included), and also features mounting points for the Raspberry Pi Zero. Each is board is fully assembled, and ready to plug and play! We also stock cases for the Raspberry Pi B+/2/3 & Raspberry Pi Zero.

The PiOT relay board allows you to bond a GPIO pin to a relay with the touch of a button. No need to tie pins using resistors, and no need to re-wire the circuit when you want to change which GPIO pin fires which relay. Simply select your GPIO pin using the on-board tactile buttons and two-digit 7-segment display, and switch that pin high or low to fire your designated relay!

The on-board display can be configured to show the Pi's BCM or Pin number system for GPIO/relay bonding, and also demonstrates visual feedback of the relay on/off status for easy monitoring. The display can also be used to test relays before configuring them with your Pi, in addition to providing menu access for setting configuration.

The PiOT relay board also features multiple innovative start-up modes designed to combat "chatter" on the GPIO which can lead to unexpected behavior. Variable delayed start-up allows users to pause activation of the relays for a short period during boot, ensuring that GPIO pins are correctly set prior to use, or the alternative handshake mode utilises a specific pulse train to enable activation and de-activation of the relay board at the user's will. No more accidental switching of relays at boot!

The PiOT relay board uses low current (~100mA) PWM (pulse width modulation) to significantly reduce the current required to hold the relays on when compared to other relay boards. This means that relay boards can be stacked up to 5 high without requiring additional external power.

Warning! Relays can be used to switch large voltages and currents. Please, please, please be careful when undertaking any work with this type of power - it can kill!

The ModMyPi PiOT Relay Board Features:

  • 4 x OMRON G5LA-1 Relays for Switching up to 10A @ 250VAC, or 10A @ 24VDC
  • 4 x Tactile Buttons for GPIO/Relay Bonding
  • Two-Digit 7 Segment Display for Visual Feedback & Setting Control
  • Micro-controlled GPIO/Relay Setting & Switching (No Jumpers Required!)
  • 40 Point Raspberry Pi GPIO Modelled Input
  • 5V & 3.3V Input Compatible
  • Low Holding Current via PWM ~ 100mA per Relay Board
  • Stackable Relay Board (Up to 5 Without External Power)
  • Multiple Start-Up Modes to Negate Boot GPIO Chatter (Delayed/Handshake)
  • Pi Zero Mounting Points

Tutorials

ModMyPi PiOT Relay Board Wiki

Example Code

Downloads

OMRON G5LA-1 Datasheet

45K22 PIC Datasheet

Video

Review and Introduction by Garage Tech Tips:

The PiOT relay board allows you to bond a GPIO pin to a relay with the touch of a button.
R516.87  Inc VAT
Discontinued: Stainless Steel Liquid Level Controller Vertical Float Switch (AW Stainless level sensor vertical)

Description :

Stainless Steel Liquid Level Controller Vertical Float Switch

Mini stainless steel float switch, contains no mercury.
This float switch is a device used to sense the level of liquid within a tank, the switch may activate a pump, an indicator, an alarm, or other devices.

Simple structure and easy installation
Light weight and simple working principle, high reliability.

The versatility of this vertically mounted controller means that it can be installed either at the top or base of your tank, depending on whether you wish to detect the water's high or low level.


Specifications:

Max contact rating: 10W / SPST
Max switching current: 0.5A
Max running current: 1A
Max switching voltage: 100V DC
Max breakdown voltage: 220V DC
Max contact resistance: 100mΩ
Working temperature: -30°C to +125°C
Float ball material: SUS304
Body material: SUS304
Cable length: About 25 cm


Package includes:

1 x Stainless Steel Vertical Water Level Switch

R90.69  Inc VAT
Discontinued: 19V Power Supply (AW C6 Allo 19V brick)
  • Works with VOLT and with Stepped Attenuator
  • 60W, 3.15Amps
  • DC Male Jack: 3mm x 6.5mm
  • Audiophile low level noise / ripple
  • Comes with the wall plug for your region (UK/US/EU)
R301.62  Inc VAT
Discontinued: HiFiBerry Digi+ standard (AW HFBerry Digi+)
The HiFiBerry Digi+ is a high-quality S/PDIF output board for the Raspberry Pi model A+,B+ Pi B2 and Pi 3B. It is designed as an add-on board that connects to the P1 and P5 header of the Raspberry Pi.

  • Dedicated S/PDIF interface chip supports up to 192kHz/24bit resolution
  • Optical (Toslink) and electrical outputs
  • Bit-perfect output, audio data stream will not be modified in any way
  • Connects directly to the Raspberry Pi, no additional cables needed
  • No soldering. The Digi+ comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi. The board conform to the Raspberry Pi hardware-attached-on-top (HAT) specification. That means it perfectly fits your Raspberry Pi.
  • Directly powered from the Raspberry Pi, no additional power supply
  • Integrated EEPROM for automatic configuration (with write-protection).
    Note that this feature is still in development by the Raspberry Pi foundation. You will be able to upgrade your HiFiBerry DAC+ when it is officially available. The sound card already works without this feature.
  • Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi.
Note about the compatibility with Raspberry Pi Model A and B: This board is not compatible with the older Raspberry Pi model A and B.
Important note: While the hardware is able to output DTS/Dolby Digital, software has to be adapted to support this. We will support the developers to implement this. Unfortunately we can’t guarantee that this feature will work with a specific software. Please ask the developers of the software if this is supported.

Guides available on the official HifiBerry site
R483.20  Inc VAT
Discontinued: Automation pHAT (AW 3B4 automation phat)

Automation HAT's little bro'. The most compact way to take control of and monitor your world!

We've pulled together a great set of features into this home monitoring and automation controller. With a relay, analog channels, powered outputs, and buffered inputs (all 24V tolerant) you can now hook up a plethora of goodies to your Raspberry Pi all at once.

Ideal for smart home and automation projects, giving your greenhouse intelligent sprinklers, or scheduling your fish feeding!

Update: In addition to our regular individual slimline postage friendly packaging the Automation pHAT is now available retail packaged with each Automation pHAT in its own colourful blister pack, ideal for retail display!

Features

  • 1 x 24V @ 2A relay (NC and NO terminals)
  • 3 x 12-bit ADC @ 0-24V
  • 3 x 24V tolerant buffered inputs
  • 3 x 24V tolerant sinking outputs
  • 3.5mm screw terminals
  • SPI pins broken out
  • Compatible with Raspberry Pi 3, 2, B+, A+, and Zero
  • Python library
  • Female header and broken out pins require soldering

Software

As ever, we've made a super-simple to use Python library to take advantage of Automation pHAT's multitudinous functions, with examples to get you started.

In fact, Automation pHAT uses the same library as Automation HAT, and it uses the presence (or absence) of the SN3218 LED driver chip to autodetct which board (HAT or pHAT) is being used. Nifty!

Our input, output and relay examples show you how to read the analog and digital inputs, switch the outputs on and off, and control the relay.

Pimoroni examples

Notes

  • Loads for the buffered outputs should be switched on the ground side, i.e. 12/24V (from supply) -> load -> output terminal -> ground (from supply)
  • The relay can tolerate up to 2A each and should be switched on the high side
Automation HAT's little bro'. The most compact way to take control of and monitor your world!
R209.90  Inc VAT
Discontinued: Machifit 15pcs 400mm CNC Parts Kit (AW 3D3 400mm CNC parts kit)
Specifications:
Type: Sliding Rail kit
Glide Path: Linear Guide
Material: 45 Steel
Accuracy Class: H
Slide Fixed Way: Lock Type, Lock Type


15pcs 400mm CNC Parts Optical Axis Guide Bearing Housings Aluminum Rail Shaft Support Screws Set

15pcs 400mm CNC Parts Optical Axis Guide Bearing Housings Aluminum Rail Shaft Support Screws Set

 

 
Package Includes:
2 pcs x 8x400mm Steel Optical Axis
2 pcs x 55x13x30mm Zinc Alloy Pillow Block Bearing
4 pcs x 42x32x11mm Aluminum Rail Shaft Support
1 pcs x 400x8mm Stainless Steel Lead Screw Rod with Nut
4 pcs x 8x34.5mm Slide Bushing
2 pcs x 5x8mm D19L25 Flexible Shaft Coupling
R625.34  Inc VAT
Discontinued: Arcade LED Illuminated Joystick Switchable from 4 to 8 Way Operation (AW Illuminated joystick arcade)
Features:

1. Switchable from 8 way to 4 way
2. Powered by 12 volts
3. Fits all wood and metal type control panels - MAME and Jamma Board Ready
4. Smooth spring return-to-center
5. High Quality 5PIN Microswitches
6. Microswitches tested to 10,000,000 cycles


Specifications:

Material: Iron
Size: 345 x 335 x 530mm
Color: 7 changing colours


Package Includes:
1 x Illuminated LED Arcade Joystick clear ball

Notice:
This is a Multiple Flashing colours unit, automatically changing from one colour to another colour.
The ball itself is clear.
R281.45  Inc VAT
Discontinued: 12cm Universal Micro USB 2.0 Data And Charging Cable (AW 2C4 12CM USB micro cable)
Specifications:

  • USB A to micro B cable
  • Length: 120mm
  • Color: black


Package includes:

1 x USB Cable
R24.90  Inc VAT
Discontinued: Google AIY Voice Kit (AW C1 Google AIY Voice Kit)

Google AIY Projects brings do-it-yourself artificial intelligence to your maker projects!

This is the AIY Voice Kit from Google as featured in The MagPi Issue 57.

More details are available at https://aiyprojects.withgoogle.com/voice/

With the Google AIY Voice Kit, you can build a standalone voice recognition system using the Google Assistant, or add voice recognition and natural language processing to your Raspberry Pi-based projects. The kit includes all of the components needed to assemble the basic kit that works with the Google Assistant SDK as well as on-device voice recognition with TensorFlow. 

Included in the kit:

  • Voice HAT accessory board
  • Voice HAT microphone board
  • Plastic standoffs
  • 3” speaker (wires attached)
  • Arcade-style push button
  • 4-wire button cable
  • 5-wire daughter board cable
  • External cardboard box
  • Internal cardboard frame
  • Lamp
  • Micro-switch
  • Lamp holder

Necessary items you will need that are NOT included in this kit:

Hi Google. What is the temperature forecast for today?
R639.90  Inc VAT
Discontinued: 2 Player Raspberry pi 3B+ Retro Gaming Kit (Pi 3B+ Retro Gaming kit)
Get started with the Raspberry Pi Retro gaming kit
These kits are perfect for individuals looking for a low cost, yet very effective retro gaming station.

RetroPie offers a wide selection of consoles and game systems frrom the very first arcade systems.

With Kodi already included, Retro kit also serves as a Media Center. By connecting it to your home network, you will be able to stream videos from any compatible devices (NAS, PC, External HDD, etc.).

It is based on the GNU/Linux Operating System. It contains thousands of different types of open source software; from tiny utilities to the massive EmulationStation Frontend.

Experience more than 40 emulators from retroarch/libretro, the famous Kodi Media Center and a custom version of EmulationStation!

You will have to setup your own control options for the games.

Due to the nature/complexity of Copyright/Intellectual Property Rights Law, which differs significantly from Country to Country, ROMs cannot be provided with RetroPie and must be provided by the user. You should only have ROMs of games that you own.


Your kit will include:


Where to find ROMs for RetroPie (free and legally) https://howchoo.com/g/otiwyjhlnzb/where-to-find-roms-for-retropie


You will find loads of help at RetroPie, visit them at https://retropie.org.uk/docs/


and here http://cvaddict.com/article.php?articleid=15

Getting Started with Raspberry Pi


RetroPie allows you to re-play a variety of videogame consoles and platforms in your living room, with ease! RetroPie is free, open source and designed to let you create your very own arcade in no time using Raspberry Pi.
R1,092.09  Inc VAT
Discontinued: Mini Retroflag NESPi NES Style Case For Raspberry Pi 3, 2, B+ (AW Nespi retro case)
Specifications:

This is a NES inspired enclosure for your Raspberry Pi system. It can turn your bare Raspberry Pi PCB into an elaborate gaming console.

NES Style:
We created this Pi case applying the most iconic element in the retro game world as a homage to the most classic console ever made.

POWER button, RESET button and LED all functional:
Front loading cartridge cover
Behind the small, hinged door, there are two USB ports and one standard RJ-45 connector.


Improved HDMI and Audio Ports
This is done to enhance the experience of using your HDMI and audio out-put cables.

Micro SD card slot on the Side
We put the slot for your Micro SD card on the side to allow more space for you to operate more freely.

Compatibility:
RASPBERRY PI 3 MODEL B, RASPBERRY PI 2 MODEL B, RASPBERRY PI 1 MODEL B+

Customization:
We tailor made this enclosure to fit your Raspberry Pi PCB perfectly so that you can use it like a NES console the way you remember it.

  You can view the manual at http://retroflag.com/download/NESPi_CASE_Manual.pdf

Package Includes:

1 x NESPi Case
4 x Adapter PCB(power,usb,lan)
1 x Screw driver
1 x Instruction manual

Grab yourself one or two retro controllers to complete the retro look and feel.
Add a fan and heat sinks to further cool down your Raspberry Pi



This is a NES inspired enclosure for your Raspberry Pi system. It can turn your bare Raspberry Pi PCB into an elaborate gaming console.
R429.90  Inc VAT
Discontinued: WS Budget Black case for Raspberry Pi (AW C7 Pi 3 Budget black case(J))

Please note: Raspberry Pi not included

Case J for RPi
specification:

R49.43  Inc VAT
Discontinued: WS Budget Clear case for Raspberry Pi (AW C7 Pi 3 Budget clear case)

Please note: Raspberry Pi not included

Case G for RPi specification:

For use with:
R49.43  Inc VAT
Per Page      81 - 100 of 182