Generic0
Please note: This product consist of the adapter cable only. There are no servos or any other boards included.
If you have a standard servo and need to connect it to a board that accepts crocodile clip connections then our new servo to crocodile clip adapter cable is the accessory for you.
The adapter cable features 100mm colour coded cables terminating in a male servo connector at one end and colour coded 35mm croc clip at the other.
Features
- This adapter cable allows you to attach a standard servo to a board that accepts crocodile connections.
- Colour coded 100mm leads and crocodile connector covers.
- Ideal for use in robotics/Buggy projects.
Pin Assignments
| Wire Colour. | Clip Cover Colour. | Usual Servo Assignment. |
|---|---|---|
| Brown Wire. | Black Clip Cover. | GND. |
| Red Wire. | Red Clip Cover. | +ve. |
| Orange Wire. | Yellow Clip Cover. | Signal. |
What's in the box?
1 x Servo to Crocodile Clip Adapter Cable
You will also need a suitable servo
Resources
Pic is for illustration purposes only
Nylon is able to fasten to many different kinds of materials, which makes it extremely versatile. Nylon screws can be used with particle board, rubber, metal, wood, and other plastic items.
Specifications
- M4 x 16 slotted screws and 6mm spacers
- Nylon and Acrylic
- Ideal for your VESA brackets
What's in the box?
1 x nylon screw M4 x 16
Features
- Unidirectional microphone with flexible noise cancelling
- Ergonomic and comfortable ear pads 40 mm, 50 mW (RMS) stereo speakers 32 ohm nominal sensitivity
- Frequency range of 20Hz 20KHz, high speed USB connection
- Adjustable, very lightweight headband
- Volume control on the headset
Specifications
- Brand: A4tech
- Colour: Black
- Form factor: On Ear
- Noise control: Active Noise Cancellation
- Headphone jack: USB plug with 200cm cable
- Model name: Hu-30
- Connectivity technology: kablolu
- Included components: Ear Cushions
- Age range (description): Adult
- Material: Faux Leather
Headset
- Speaker unit: 40mm
- Frequency response: 20Hz - 20KHz
- Sensitivity: 102dB
- Impedance: 32 ohm
Microphone
- Frequency response: 100Hz - 10KHz
- Sensitivity: 42dB
What's in the box?
1 x stereo Headset with microphone
Amplify Spark Series 10,000mAh Powerbank - Stay Powered On the Go!
Never worry about running out of battery again with the Amplify Spark Series 10,000mAh Powerbank. This sleek, portable powerhouse is designed to keep your devices charged and ready, wherever life takes you. Perfect for travelers, commuters, and anyone on the move, this power bank offers fast, efficient charging in a compact and lightweight design.
Key Features:
- High-Capacity Battery (10,000mAh): Charge your devices multiple times throughout the day, whether it's your smartphone, tablet, or other USB-powered gadgets.
- Dual Fast-Charging Ports: Equipped with two 5V DC, 2.1A charging ports, you can charge two devices simultaneously without compromising on speed.
- Quick Input Charging: Recharge the power bank quickly with a 5V DC, 2A input, ensuring you're back on the go in no time.
- Lithium Polymer Battery: Offers long-lasting power with enhanced safety and performance.
- Compact & Lightweight: Take it anywhere! The slim, travel-friendly design fits easily into bags, purses, or pockets.
- Versatile Compatibility: Perfect for smartphones, tablets, Bluetooth speakers, headphones, and other USB-powered devices.
Why Choose the Spark Series 10,000mAh Powerbank?
- Dual Charging Efficiency: Charge two devices at once with fast 2.1A ports-ideal for keeping your phone and tablet charged simultaneously.
- Portable & Convenient: Slip it into your bag and enjoy peace of mind knowing your devices are always ready for action.
- Powerful & Reliable: With a large 10,000mAh capacity, you'll have enough juice to keep your devices charged all day-perfect for travel or busy days.
What's in the box
1 x Amplify Spark Series 10000mAh Powerbank
If you're building or maintaining an electronic project, this terminal block is a cleaner, faster, and reusable solution. Simply connect your power inputs and distribute it to the rest of your project. No soldering, taping or crimping required! Keep your project wiring organised, secure and ready for fast troubleshooting or upgrades during improvements.
What's in the box?
2 x inline (1 to 1) connectors
Resources
If you're building or maintaining an electronic project, this terminal block is a cleaner, faster, and reusable solution. Simply connect your power inputs and distribute it to the rest of your project. No soldering, taping or crimping required! Keep your project wiring organised, secure and ready for fast troubleshooting or upgrades during improvements.
What's in the box?
1 x inline (T shaped) connector
Resources
The below pics use the 1 to 1 terminal as a "how to" example
These cables give you a variety of options for connecting and placing your NVMe boards. Suitable for Various Raspberry Pi 5 PCIe HATs
Available in 40mm and 70mm options
Specifications
Application examples
*Raspberry Pi and HAT shown for demonstration purposes only. Please refer to "What's in the box" for the detailed part list
Outline dimensions
*Both sizes shown for demonstration purposes only
What's in the box?
1 x 70mm PCIe Flex cable
This 3mm MDF (+-300mm x 300mm) is perfect for laser cutting and engraving.
A perfect fit for your Creality Falcon Laser. Get those wishlist projects started!
What's in the box?
6 x MDF boards
Switched 2-way Top and Bottom Loader Euro Socket Adapter White SWD-72002-WT
Features
- Safetyshutters Included
Specifications
- Socket: 2x Euro
- Voltage: 250V
- Type: Non Surge
What's in the box?
1 x Switched 2 Way Adapter top and bottom loader white
The SmartiPi Touch Pro 3 is a premium enclosure designed for the Raspberry Pi Touch Display 2 and is compatible with Raspberry Pi 5, 4, and 3 boards (display and Raspberry Pi not included).
This large version provides space for HATs or custom components, while both include a dedicated mounting point for a Raspberry Pi Camera (V2 or V3, including wide-angle versions) beneath the screen.
For Raspberry Pi 5 users running Raspberry Pi OS, the case includes a side-mounted switch that connects to the Pi’s power control header. USB and Ethernet ports are accessible from the side of the case, with HDMI, audio, and power ports available at the rear. A micro SD card extender routes the card slot to the top of the case for easy access.
Other features include a weighted base with tilt adjustment, 75mm VESA mount points, punch-out port covers for all supported Raspberry Pi models, and a removable side panel for easier access to HATs or connectors.
Important Notes
- Raspberry Pi and Touch Display 2 not included
- A separate USB-C power supply is required (not included)
Features
- Your Touch Display 2 is powered by the Raspberry Pi GPIO as usual (extended GPIO pins are required if using a HAT)
- The power, HDMI, and audio jack on the Raspberry Pi are accessible on the back of the case
- A removable panel near the Raspberry Pi ports allows the flexibility of accessing HAT boards and connectors
- The included microSD extender allows access to the microSD card at the top of the case
- 75mm VESA mount points on the back of the case
- Weighted base
- Punch out USB/Ethernet covers for Raspberry Pi 3,4, and 5
- Mounting point for Raspberry Pi camera V2 and V3 (wide-angle and standard lens)
- Back panel on the back cover can be cut out with a utility knife (allows for customisation if desired)
- Front adhesive label to cover the camera hole
- Tilting display
- Side button to actuate the on/off microswitch on Raspberry Pi 5
- Secondary set of interior mounting points for a development board, HAT, or alternative Raspberry Pi position
- Cooling fan is not included
What's in the box?
1x SmartiPi Touch Pro 3
Resources
These are suitable for DIY projects and the Raspberry Pi pcb as the screw outside diameter is only 2.5mm that fits in the Pi mounting holes.
Brass standoffs are essential components in electronic projects, particularly in applications where circuit boards need to be securely mounted within an enclosure or chassis.
Here's how they are typically used:
Board Mounting: Brass standoffs are used to elevate and secure printed circuit boards (PCBs) within an electronic enclosure or chassis. They provide a stable platform for the PCB, preventing it from coming into contact with conductive surfaces that could cause short circuits.
Mechanical Support: Standoffs act as spacers between the PCB and the mounting surface, ensuring proper ventilation and preventing heat buildup. This is crucial for maintaining the integrity of sensitive electronic components.
Isolation: Brass standoffs help to electrically isolate the PCB from the chassis or enclosure. This isolation is essential for preventing electrical interference, reducing the risk of noise and signal degradation, and enhancing overall circuit performance.
Easy Access: Standoffs facilitate easy access to the PCB for maintenance, repairs, or upgrades. By raising the board above the mounting surface, technicians can easily reach components and make necessary adjustments without disassembling the entire system.
Vibration Dampening: In applications where vibration is a concern, brass standoffs can help dampen vibrations transmitted to the PCB, thereby reducing the risk of component failure or solder joint fatigue over time.
Grounding: Depending on the design, brass standoffs can also be used as grounding points for the PCB. By connecting the standoffs to the ground plane on the PCB, they provide a convenient and reliable grounding solution.
Overall, brass standoffs play a crucial role in ensuring the structural integrity, electrical isolation, and proper functioning of electronic systems. Their versatility and reliability make them indispensable components in a wide range of electronic projects.
What's in the box?
Type | Length (Size) | Quantity |
Spacers Male-Female | 4mm + 6mm, M2.5 | 10 |
Spacers Male-Female | 5mm + 6mm, M2.5 | 10 |
Spacers Male-Female | 6mm + 6mm, M2.5 | 10 |
Spacers Male-Female | 8mm + 6mm, M2.5 | 10 |
Spacers Male-Female | 10mm + 6mm, M2.5 | 10 |
Spacers Male-Female | 12mm + 6mm, M2.5 | 10 |
Screws | M2.5 x 6 | 60 |
Nut | M2.5 | 60 |
If you have, you'll need a pack of these Mini-Magnet Feet. Adafruit got these specifically for their RGB LED Matrices, which no longer include mounting equipment. At 16.6mm long, these magnet-screws slot perfectly into the panel mounting holes.
Works with any RGB matrices with 3mm mounting bosses
Note: This pack is just the four mini-magnet feet. RGB matrix panel is not included, but we carry many options!
What's in the box?
4 x Magnetic thumb Screws
PLEASE NOTE: Pic is for demonstration purposes only
Ribbon Cables are NOT included, this is the adaptor board only!
Extend the range of your RPi 5 and Zero Cam projects with this handy cable joiner.
This version is a 22-pin to 22-pin cable joiner (the smaller cable type that the Pi Zero and Raspberry Pi 5 uses).
This adapter will not accept the wider 15-pin standard Raspberry Pi camera cable.
What's in the box?
1 x 22 pin cable joiner
⚠️ LiPo Battery Safety Warning
Lithium polymer (LiPo) batteries store a large amount of energy and can catch fire or explode if misused. Please read and follow these precautions:
- Charge only with a charger designed for LiPo batteries, and never leave charging batteries unattended.
- Do not puncture, crush, bend, or otherwise physically damage the battery.
- Do not expose to heat, fire, or water, or store above 60°C (140°F).
- Do not over-discharge, over-charge, or short-circuit the battery.
- Stop use immediately if the battery becomes swollen, deformed, hot, or damaged, and dispose of it safely at a battery recycling point — do not throw in household trash.
- Store in a fire-resistant container or bag when not in use.
- Use is at the customer's own risk. The seller is not liable for damage, injury, or loss resulting from improper handling, charging, or storage.
Lipo Batteries (Polymer Lithium Ion) offers extremely light weight and high energy density. This Battery is rated at 3.7V 110mAh and is terminated with a 2-pin JST-PH connector (2mm pin spacing). These batteries require special charging so please do not attempt to charge these with anything but a specialized Lithium Polymer charger.
Specifications
- Voltage: 3,7V
- Capacity: 110mAh
- Dimensions: 26.5 x 20 x 3.8mm
- Connector: JST-PH (2mm Pitch)
- Weight: 2.65g
You might find our LiPo Amigo Pro (LiPo/LiIon Battery Charger) handy for your projects.
What's in the box?
1 x Battery LiPo 110 mAh 3.7V
⚠️ LiPo Battery Safety Warning
Lithium polymer (LiPo) batteries store a large amount of energy and can catch fire or explode if misused. Please read and follow these precautions:
- Charge only with a charger designed for LiPo batteries, and never leave charging batteries unattended.
- Do not puncture, crush, bend, or otherwise physically damage the battery.
- Do not expose to heat, fire, or water, or store above 60°C (140°F).
- Do not over-discharge, over-charge, or short-circuit the battery.
- Stop use immediately if the battery becomes swollen, deformed, hot, or damaged, and dispose of it safely at a battery recycling point — do not throw in household trash.
- Store in a fire-resistant container or bag when not in use.
- Use is at the customer's own risk. The seller is not liable for damage, injury, or loss resulting from improper handling, charging, or storage.
Lipo Batteries (Polymer Lithium Ion) offers extremely light weight and high energy density. This battery is rated at 3.7V 1200mAh and is terminated with a 2-pin JST-PH connector (2mm pin spacing). These batteries require special charger so please do not attempt to charge these with anything but a specialized Lithium Polymer charger.
Specifications
- Capacity: 1200mAh
- Nominal Voltage: 3.7V
- Open Circuit Voltage: 3.75 to 4.2V
- Cut Off Voltage: 2.4V
- Standard Charge Current: 240mA
- Max Continuous Charge Current: 1C (1200mA)
- Dimensions: 61mm x 37mm x 5.1mm
- Protection Circuit: Yes (DW01 IC)
- Connector: JST-PH
- Weight: 24g
You might find our LiPo Amigo Pro (LiPo/LiIon Battery Charger) handy for your projects.
Dimensions
What's in the box?
1 x Battery LiPo 1200mAh 3.7V
2 x JST-PH Connector - PCB Mount 90 Deg Bend
2 x Cable with JST-PH Female Connector 200mm
⚠️ LiPo Battery Safety Warning
Lithium polymer (LiPo) batteries store a large amount of energy and can catch fire or explode if misused. Please read and follow these precautions:
- Charge only with a charger designed for LiPo batteries, and never leave charging batteries unattended.
- Do not puncture, crush, bend, or otherwise physically damage the battery.
- Do not expose to heat, fire, or water, or store above 60°C (140°F).
- Do not over-discharge, over-charge, or short-circuit the battery.
- Stop use immediately if the battery becomes swollen, deformed, hot, or damaged, and dispose of it safely at a battery recycling point — do not throw in household trash.
- Store in a fire-resistant container or bag when not in use.
- Use is at the customer's own risk. The seller is not liable for damage, injury, or loss resulting from improper handling, charging, or storage.
LiPo Batteries (Polymer Lithium Ion) offers extremely light weight and high energy density. This battery is rated at 3.7V 800mAh and is terminated with a 2-pin JST-PH connector (2mm pin spacing). These batteries require special charger so please do not attempt to charge these with anything but a specialized Lithium Polymer charger.
Specifications
- Capacity: 800mAh
- Nominal Voltage: 3.7V
- Open Circuit Voltage: 3.75 to 4.2V
- Cut Off Voltage: 3.0V
- Standard Charge Current: 0.2C /4.2V
- Max Continuous Charge Current: 1C /4.2V
- Standard Discharge: 0.2C /3.0V
- Dimensions: 41mm x 25mm x 7.5mm
- Protection Circuit: Yes (DW01 IC)
- Connector: JST-PH
- Weight: 18g
You might find our LiPo Amigo Pro (LiPo/LiIon Battery Charger) handy for your projects.
Dimensions
What's in the box?
1 x Battery LiPo 800mAh 3.7V
1 x JST-PH Connector - PCB Mount 90 Deg Bend
⚠️ LiPo Battery Safety Warning
Lithium polymer (LiPo) batteries store a large amount of energy and can catch fire or explode if misused. Please read and follow these precautions:
- Charge only with a charger designed for LiPo batteries, and never leave charging batteries unattended.
- Do not puncture, crush, bend, or otherwise physically damage the battery.
- Do not expose to heat, fire, or water, or store above 60°C (140°F).
- Do not over-discharge, over-charge, or short-circuit the battery.
- Stop use immediately if the battery becomes swollen, deformed, hot, or damaged, and dispose of it safely at a battery recycling point — do not throw in household trash.
- Store in a fire-resistant container or bag when not in use.
- Use is at the customer's own risk. The seller is not liable for damage, injury, or loss resulting from improper handling, charging, or storage.
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries. The batteries come pre-attached with a 2-pin JST-PH (2mm Pitch) connector.
Specifications
- Capacity : 500mAh
- Voltage: 3.7V
- Size: 38.5mm x 29.5mm x 5mm
- Weight: 16g
You might find our LiPo Amigo Pro (LiPo/LiIon Battery Charger) handy for your projects.
What's in the box?
1 x Battery LiPo 500mAh 3.7V
Resources
⚠️ LiPo Battery Safety Warning
Lithium polymer (LiPo) batteries store a large amount of energy and can catch fire or explode if misused. Please read and follow these precautions:
- Charge only with a charger designed for LiPo batteries, and never leave charging batteries unattended.
- Do not puncture, crush, bend, or otherwise physically damage the battery.
- Do not expose to heat, fire, or water, or store above 60°C (140°F).
- Do not over-discharge, over-charge, or short-circuit the battery.
- Stop use immediately if the battery becomes swollen, deformed, hot, or damaged, and dispose of it safely at a battery recycling point — do not throw in household trash.
- Store in a fire-resistant container or bag when not in use.
- Use is at the customer's own risk. The seller is not liable for damage, injury, or loss resulting from improper handling, charging, or storage.
Feel free to trim this depending on space (packaging vs. website vs. invoice insert) — happy to make a shorter one-liner version too if you need it for a label with limited room.
These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 5000mAh!
Specifications
- Part No Supplier: 105568P
- Capacity: 5000mAh
- Voltage: 3.7V
- Connector: JST-PH (Pitch: 2mm)
- Dimensions: 64 x 54 x 9.7mm
- Weight: 96g
- Polarity of JST Connector
We follow the polarity Sparkfun and Adafruit is using on their boards. Please take care when designing your own prototypes - see below image for correct polarity of JST connector
You might find our LiPo Amigo Pro (LiPo/LiIon Battery Charger) handy for your projects.
What's in the box?
1 x Battery LiPo 5000mAh 3.7V + Male JST-PH Connector
Resources
Specifications
| Material | ABS + silicone + stainless steel | Color | Black |
|---|---|---|---|
| Unfold length | 49mm (without screw adapter) | Fold length | 82 × 31 (mm) |
| Mount | 1/4″ imperial thread, with M4 metric thread adapter | Weight bearing | 1.3KG |
Fits in Your Pocket, Ready Anytime
Only 82mm long and 30g weight, easily fits into your pocket or bag
Stable Support, safe and convenient
Wide-angle opening with three-axis stable locking, eliminates micro-vibrations during shooting, supports up to 1.3KG of load
High Compatibility, Flexible Integration
Compatible with 1/4″ and M4 interfaces, suitable for various photography/industrial/electronic devices
Outline Dimensions
What's in the box?
1 x tripod
1 x 1/4″ to M4 screw adapter
Ideal for use with out Raspberry Pi 5 protective case
Ever feel the need to relive the glory days of button mashing in your local arcade?
Or possibly you just need to add a button to your project and want something a little more colourful and satisfying.
These lovely little arcade buttons not only add colour to your project, they also have a 2mm travel when pressed, giving a really satisfying feel. We like them so much we used them for the Picade!
Button dimensions - 27mm outer diameter, 19.5mm button cap diameter, 32mm depth (inc. spade terminals). The male spades are 2.8mm / 0.11 inch wide.
What's in the box?
1 x Classic Arcade button