Generic0
Please note: Pic is for illustration purposes only. This fan's connector is for Raspberry Pi 5, not the one shown in the pic.
This tiny but powerful 30mm fan can be used to keep your Raspberry Pi 5 cool.
Specifications
- Dimensions: 30x30x07mm
- Bearing Type: Sleeve
- Connector: Raspberry Pi 5 4-pin fan header
- Rated Voltage: DC 5V
- great for use with your own enclosures and designs
What's in the box?
1 x DC Fan 30x30x7mm
This 3mm MDF (+-300mm x 300mm) is perfect for laser cutting and engraving.
A perfect fit for your Creality Falcon Laser. Get those wishlist projects started!
What's in the box?
4 x MDF boards
Mainly used for the power connection on to Laptop Power Supplies (Please check correct for your laptop power supply, some power supplies uses Figure 8 Power cables)
Features:
- Cable can be used on electrical appliances up to 250V
- 3 pin Clover to 3-pin SA Electrical Plug
What's in the box?:
1 x DEDICATED POWER CORD
Spring washers also called split lock washers, provide a vibration resistant function, they consist of ring split at one point and bent into a helical shape, this causes the washer to exert a spring force between the fastener's head and the bearing face which maintains the washer hard against the face and the bolt thread hard against the nut or threaded hole, creating more friction and resistance to rotation
Specifications:
- Spring Washer
- M4
- Pack of 10
What's in the box:
10 x Spring washers
Outdoor electrical junction boxes are designed to keep sensitive electrical connections protected and secure in any environment, even underground. Meeting a variety of NEMA and IP ratings ensures our waterproof junction boxes are robust and durable for outdoor use, but they can also be used for indoor applications.
Specifications:
- Junction box
- T60
- weather proof IP66
- 110 x 110 x 55
What's in the box?
1 x Junction Box
The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .
Installation Tips
1. The 2 short screws are used to mount the raspberry pi zero in the case.
2. The 2 long screws are used to mount the raspberry pi zero and lid from the outside.
Features
Material : ABS
Colour: Black
What's in the box?
1 x Raspberry Pi Zero ABS Case
Specifications
- FREQUENCY RANGE 2400-2500/5150-5850 MHz
- MAXIMUM POWER 10 W
- BANDWIDTH 100–700 MHz
- DIMENSIONS 109 × 10 mm
- VSWR ≤1.92
- CONNECTOR SMA male central pin
- PEAK GAIN 2±0.5 dBi
- BODY MATERIAL TPEE
- OUTPUT IMPEDANCE 50 Ω
- OPERATING VOLTAGE -20˚C ~ + 70˚C
- POLARISATION Vertical
- RADIATION Omnidirectional
What's in the box?
1 x CM4 Antenna kit
Resources
PLEASE NOTE:
Misusing or mishandling a lithium-ion battery may cause a FIRE or EXPLOSION which can result in INJURY or DEATH.
These are 14500 Li-ion rechargeable 3.7V 800mAh batteries. They discharge in a time of 2-5 Hour at a maximum of 1A.
Specifications
- Model: 14500
- Type: Li-Ion Battery
- Nominal Capacity: 800mAh
- Nominal Voltage: 3.7V
- Colour: Blue
- Weight: 19g
- Rechargeable Battery: Yes
- Rechargeable Times: Up to 500 times
What's in the box?
1 x 14500 Li-ion battery
You might also need a battery charger
These DIN rail mountable enclosures are designed specifically for the Raspberry Pi 4 Model B and they come in a variety of shapes and sizes!
This is a DIN rail mountable enclosure with a transparent removable top for easy access!
The kit comes complete with DIN rail hook for ultra-fast mounting.
The unit features 36mm internal clearance from the Raspberry Pi PCB to the top of the case, so there's plenty of room for GPIO mounted expansion boards.
Features
- Raspberry Pi DIN Rail Mountable Case for Electrical Domestic Cabinet 43880 STD Application.
- Wall Mountable
- Secure Clip-In Base
- UL94V-0 Self Extinguishing PPO and PC Material
- Includes DIN Rail Hook
- Rev. 2 Raspberry Pi Board Mounting Points (Screws Included)
- Dimensions (LxWxH) 90.5mm x 71.3mm x 62mm
- Transparent Panel for Easy Access
What's in the box?
1 x Pi 4 DIN Rail Case
Resources
- 85mm x 56mm x 30mm
- ABS Black
- Screw Lid
- Ideal for electronic projects
What's in the box?
1 x project enclosure
Specifications
- LED type 5050
- IC WS-2812B
- Voltage 5V
- Colour RGB
- PCB width 10mm
- Beam angle 120°
- Operating power 0.3W/LED
- Length 1m/roll
- Operating temperature -25~80℃
- Grey scale 256 Adjustable (per color)
- LED Quantity 60 LEDs/M
- Degree of protection IP65
- Connection 3PIN SM connector cable + 2PIN voltage adding cables Installation method with 3M double-sided tape on the back
- Cable definition
- Red cable (5V positive), white cable (5V negative) and green cable (DATA signal)
Product Details
High light transmittance and flexible, insulated and anti-leakage,
can be bent into any shape
Covered with high-transparency resin to protect against small water jets
Installation Mode
Dimensions
What's in the box?
1 x 1m RGB LED strip
Resources
WIKI: www.waveshare.com/wiki/RGB-5050-5V-IP65-60D-1M
matching with the CM4 on size and mounting holes, fast heat dissipation
no hindrance to the antenna
using with base board
for reference only, CM4 and based boards are NOT included.
comparing CM4 Cooling Solutions
Outline dimensions
What's in the box?
1 x CM4 heatsink
Resources
1. Attach thermal tapes onto the CM4, fix the nuts and standoffs to the heatsink
2. Fix the screws as the pictures shown
Easily Identify Wiring Order
The pass-through function allows the wires to pass all the way through the plug to let you verify they are in the correct order before crimping the plug.
Pass-Thru Design
Simplifies terminations as wires are inserted through the connector and out the other side. This frustration-free 1-piece plug seats cable jackets tightly for fast crimps and connections.
What's in the box?
10 x RJ45 EZ Cat6 Pass Through Crimp Connector
What's in the box?
1 x 30cm 10 Pin Male to crocodile clip
What's in the box?
1 x Creality WIFI Smart Kit with Camera and 8G TF Card
Resources
You will find more info here
The TTGO T-Beam ESP32 LoRa 868MHz is built around a dual-core ESP32 chip, with 4MB of SPI flash onboard, providing both Wi-Fi and Bluetooth LE via a “3D antenna” on the PCB. The board’s LoRa operates at 868MHz and comes with an included SMA antenna. While location tracking is provided by the onboard u-blox NEO-6M GPS module with ceramic antenna.
Specifications
- MCU ESP32
- Flash 4MB
- PSRAM 8MB
- Serial Chip CH9102
- Wireless protocol Wi-Fi + Bluetooth 4.2
- PMU AXP192
- Onboard functions 3 Buttons (Power+IO38+Reset)
Antenna
- 3D WiFi Antenna [Use by default], (Support WiFi IPEX external antenna, but you need to jump resistance)
- LoRa antenna
- GPS ceramic antenna
GPS
- NE0-6M GPS Modules: Support GPS protocol
- Onboard RTC crystal, Support interrupt/ wakeup
LoRa
- Long Range Low Power LoRa Transceiver
- High sensitivity: -i48dBm
- Transceive rate: 300 kbps
- Optional Hardware
- SX1276[868Mhz]
Display Details
- OLED: 0.96 inch
- Driver: SSD1306
Software
- Meshtastic - See Resources below
- Meschtastic firmware
Power Supply Mode
Support USB Micro/ 18650 battery holder [USB can power the battery]
Need batteries? You will find our battery selection here
What's in the box?
1 X T-Beam V1.1 (Include Soldered OLED)
1 X 433Mhz or 868Mhz Antenna
2 X Pin headers
Resources
If you need technical support please check the links below to find more details.
Fits the 2mm mounting holes provided on your Raspberry Pi V2 and module 3 cameras.
Features
- M2x6mm
- Slotted cheese head bolts
- Stainless steel
- Fits through the holes on the RPI board
What's in the box?
1 x bolt
Specifications
- Material: Aluminium
- Colour: Silver
- Size: 14.3mmx19.8mmx7.2mm
- Net weight: 30g/8pcs
What's in the box?
1 x Aluminium Heat Sink
These DIN rail mountable enclosures are designed specifically for the Raspberry Pi 5.
This is a DIN rail mountable enclosure with a transparent removable top for easy access!
The kit comes complete with DIN rail hook for ultra-fast mounting.
The unit features 36mm internal clearance from the Raspberry Pi PCB to the top of the case, so there's plenty of room for GPIO mounted expansion boards.
What's in the box?
1 x Pi 5 DIN Rail Case
Resources
1. press the rail lock by forefinger, then push it out by thumb as the picture shown
2. remove the bottom panel from the main part
3. fix the Raspberry Pi onto the bottom panel by screws
4. put on the bottom panel, aligning it with the buckle and USB connectors
5. snap another side
6. insert the rail lock (note the different sides, don't be upside down)