Generic1

Description：

In order to  properly seat your Bowden tube, it is key to have a clean, square end. Without this, you risk oozing, or worse, clogging in the hot end. This super-sharp tubing cutter is the perfect tool for obtaining a clean, square cut in your tubing, every time.

Features a stainless steel blade and switch button. The housing is made from tough durable plastic. Can also be used to cut filament. But do not use as a wire cutter or you will dull the blade.

Package includes:

1 x Tube Cutter

Description:

This heatsink comes with 3M thermal conductive tape.
A heat sink is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium and are designed to maximize the surface area in contact with the coolant fluid. Aluminium alloys are the most common heat sink material. 

Don't like the noise generated by most fans?

A heatsink is perfect for quietly cooling SBCs or MCUs, like your Raspberry Pi

Features:

• Material: Aluminum & Heat Conductive Tape
• Bottom Size: 14mm x 13mm
• TopSize: 18mm x 13mm
• Height: 6mm
• Weight: 1.4g

What's in the box:

1 x heatsink

Note:

Heatsinks conduct electricity. When installing your heatsink make sure it isn't in contact with anything else. It could cause a short circuit and kill your board.

Description:

Name: MPU-6050 module (three-axis gyroscope triaxial accelerometer)
2.54mm pin spacing
MPU-6050 Accelerometer Gyro
The MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, since it contains 16-bits analog to digital conversion hardware for each channel. Therefor it captures the x, y, and z channel at the same time.

Specifications:

16bit AD converter-chip, 16-bit data output
Use Chip: MPU-6050
Power supply :3-5v (internal low dropout regulator)
Communication: IIC communication protocol standard
Gyro Range: ± 250 500 1000 2000 ° / s
Acceleration range: ± 2 ± 4 ± 8 ± 16g
Using Immersion Gold PCB, welding machines to ensure quality
Size: 20mm x 16mm x 10mm

Application:

Motion sensing games
Augmented Reality
Electronic Image Stabilization (EIS: Electronic Image Stabilization)
Optical Image Stabilization (OIS: Optical Image Stabilization)
"Zero-touch" gestures User Interface
Pedestrian navigation
Gesture shortcuts

Market:

Smart phone
Tablet device
Handheld games
3D remote controller
Portable navigation devices

What's in the box?

1 x MPU-6050 module

Description:

MC4 connectors are single-contact electrical connectors commonly used for connecting solar panels. The MC in MC4 stands for the manufacturer Multi-Contact and the 4 for the 4 mm diameter contact pin. MC4s allow strings of panels to be easily constructed by pushing the connectors from adjacent panels together by hand, but require a tool to disconnect them to ensure they do not accidentally disconnect when the cables are pulled. The MC4 and compatible products are universal in the solar market today, equipping almost all solar panels produced since about 2011.


Specifications:

Item no: MC4-D
Rated voltage: 1000 V
Rated impulse voltage: 1000 V
Rated current: 24A - 14 AWG (2.5mm), 30A - 12 & 10 AWG (4mm & 6mm)
Test voltage: 6 kV (50 Hz)
Protection grade: IP67
Insulation material: PC/PA
Contact material: Copper, silver-plated
Operating temperature: -40degC ~ 90degC
Safety class: II
Flame class: UL94-V0
Contact resistance: le5mOmega
Insertion / Withdrawal force: le50N / ge50N
Suitable for cables: 10, 12, 14 AWG (2.5mm2/4mm2/6mmsup2;)
Locking system: Snap-in

Package Includes:

1 x MC4 Compatible Adapter Diode connection 15A

Description:

Connector socket for 5.5mm x 2.1mm DC Jack
Panel mount

What's in the box?

1 x socket plug

Images are for illustration purposes only. Colors may vary

Description:

Snagless boots for CAT5 CAT5E CAT6 CAT6E Networking Cable
Suitable for Round 0.25 Diameter UTP Cable
Made of high density polyethylene (HDPE)
Protect the plug latch from snagging when pulling cords


Features:

Material:PC .
Protect the adapter Plug Cable.
Color : random

Package includes:

10 X RJ45 Cap Boots Modular Plug Cover

Description:

Perfect solution for all HDMI devices that need to connect to VGA devices. This product is a portable digital-analog conversion line, defined through All  HDMI input sources. The HDMI to VGA Adapter allows for a connection to VGA monitors and projectors supporting a maximum resolution of 1920X1080

Widely used for: Computer / DVD / digital set-top box / laptop / mobile phone / digital camera / Table PC / media player / a range of HD sources such as input devices. Video signals to the TV / monitor / projector output. To solve a simple user operation of the display device connectivity solutions.

Specifications:

Flexible and functional
No external power supply needed, plug and play
Product resolution can be up to 720P/1080i/1080P
Input: HDMI Mini, HDMI Micro or HDMI
Output: VGA

Package  Includes:

1 x HDMI to VGA Cable (male to female LENGTH=20CM)
1 x Micro HDMI Male to HDMI Female Adapter
1 x Mini HDMI Male to HDMI Female Adapter

Application:

Build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.

Compatible with:

80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions

Specifications:

Recommend to use M5 x10mm screw and M5 T nut
Material: Mild Steel
Thickness：3mm

These plates are laser cut from 3mm mild steel and still needs to be painted/powder coated.

What's in the box?

1 x bracket

Application:

Build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.

Compatible with:

80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions

Specifications:

Recommend to use M5 x10mm screw and M5 T nut
Material: Mild Steel
Thickness：3mm

These plates are laser cut from 3mm mild steel and still needs to be painted/powder coated.

What's in the box?

1 x bracket

Description:

The ESP32-CAM is a small size, low power consumption camera module based on ESP32. It comes with an OV2640 camera and provides onboard TF card slot. The ESP32-CAM can be widely used in intelligent IoT applications such as wireless video monitoring, WiFi image upload, QR identification, and so on.

Specifications:

Low-power dual-core 32-bit CPU for application processors
Main frequency up to 240MHz, computing power up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras, built-in flash
Support image WiFi upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA AP working mode
Support Smart Config/AirKiss one-click distribution network
Support secondary development

What's in the box?

1 x ESP32-cam board
1 x pigtail
1 x antenna

Description:

This Ethernet splitter allows two computers to share one Ethernet line ONE AT A TIME, it doesn't support both computer to connect onto the internet simultaneously.




Specifications:

Compact design
Convert and increase your Ethernet connections from 1 to 2 sockets
Simply plug into the each end
Great for use with Cat 6, Cat 5, Cat 5e network cables

What's in the box?

1 x Ethernet splitter

Description:

High Quality Hygrometer, wonderful tools for Indoor, Outdoor, Home, Laboratory, Library..etc.


Specifications:

Color: Black
Measuring humidity: 10%RH-99%RH
Humidity accuracy: 5%
Humidity display resolution: 1% RH
Measuring temperature range: -50 centigrade~ 70 centigrade
Temperature accuracy: 1 centigrade
Temperature display resolution: 0.1centigrade .
Operating voltage: 2 x 1.5V button LR44 batteries (Not included)
Dimension: 4.7x2.8x1.5cm(approx.)
LCD dimension: 3.6x1.7cm(approx.)


Package includes:

1 x Humidity Hygrometer Meter

Description:

MF RC522 is applied to 13.56MHz contactless communication highly integrated chip card reader, is NXP for the "Three Tables" application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. In addition, support fast CRYPTO1 encryption algorithms, terminology validation MIFARE products. MFRC522 supports MIFARE Series higher speed non-contact communication, two-way data transfer rates up to 424kbit / s. As a highly integrated 13.56MHz card reader new family of chips, MF RC522 MF RC500 and MF RC530 and there are many similarities, but also have many features and differences. It is between the host communication using SPI mode, helps to reduce connection, reduce PCB board size and cost.

RFID module
MF522-AN module adopts Philips MFRC522 original reader circuit chip design, easy to use, low cost, suitable for equipment development, development of advanced applications such reader users, the need for RF card terminal design / production of the user. This module can be loaded directly into a variety of readers molds. Module uses voltage of 3.3V, through the SPI interface simple few lines can be directly connected to the user any CPU board communication module can guarantee stable and reliable work, reader distance;

Specifications:


1. Support: S50/S70 and other ISO14443A card
2. Operating system: Windows 98/XP/2000/CE/7/ME/NT/LINUX
3. Reading distance: 0-8 cm
4. Reading speed: 0.2S
5. Working temperature: -20 C - 85 C
6. Working voltage: 5V
7. Working current: 200mA
8. Work instruction: LED, Beeps

What's in the box?

1 x USB reader
1 x USB cable

Description:

Compatible with USB 2.0, it provides full isolation at 12 Mbps data rates. With isolation of 2500V, it has no external power supply, no driver required.

Description:

Ideal for connecting 2 HDMI cables together to create single longer cable. Or to extend your HDMI port when mounting your device

Specifications:

•     Type: D type HDMI chassis connector
•     Style: panel mounted
•     Colour: black
•     Material: zinc alloy
•     Application: Audio,Video

What's in the box?:

1 x female HDMI panel mounted connector

Description:

You will find a South African plug adapter here

You can now disconnect your Raspberry Pi Pico from your computer and use the micro USB power supply to power your project.

Features:

• Input Voltage: AC 100-240V 50/60Hz
• Output: DC 5.0V 2000mA (2.0A)
• Cable Length: Approx.870 mm
• Short Circuit Protection
• Overload Protection
• Consistent fixed switching voltage
• Internal Fuse for Extra Safety

What's in the box:

1 x EU Power supply
1 x USB A to micro USB cable

Description:

It supports plug play connections for devices including external hard drives, modems, printers, scanners, VOIP devices other USB peripherals.


Specifications:

• USB version 2.0 compliant
• Supports Hi-Speed, 480 Mbps
• Lenght: 1M
• A to A, male to male, molded type
• ROHS Compliant
• Colour: Black
• Ultra thin and flexible

Package Includes:

1 x USB 2.0 Type A Male to A Male Cable Black

Description:

Constructed of high quality material, durable and safe.
Mini motor model toy, a device for converting electrical energy into mechanical energy.
A series of physical science broaden kids and children's horizon, stimulating their curiosity.

Specifications:

Type: Motor Toy
Material: ABS, Electronic Components
Features: Durable, Energy Conversion Learning, Easy to Assemble, Miniature Size
Size: 60mm x 52mm x 37mm (Approx.)



Package Includes:

1 x Motor  toy model
1 x Plastic propeller