Generic3

Sort By:  
6W Stereo USB Power and Signal Speaker-Black (USB stereo black)
This small Computer Speaker is USB-powered and USB communicated, just plug and play. No extra 3.5mm Audio Jack is needed. It is very easy to use. For a Mini Speaker, the sound is loud and beautiful. This USB Desktop Speaker will bring you good audio for you to listen to music, watch films, or play games. The small USB Speaker is energy-saving and environmentally-friendly. This mini Portable Speaker is specially designed for desktop, laptop, notebook, tablet PC, and even Raspberry Pi boards and Jetson.



As the new Raspberry Pi 400 keyboard computer does not come with a 3.5mm Audio Barrel for speaker output, this USB powered, and signal is the perfect speaker for it. And we have tested it with Raspberry Pi 400, it works like expected. No driver is needed, plug and use!



Note: If you're using the speaker with your Raspberry Pi, be sure to change the audio device to USB2.0 Device and change the output to Digital Stereo Output. Else, you will not be able to control the volume.



Features and specifications

  • They are small and compact, so they can be brought anywhere.
  • Powered by a single USB cable, have NO volume control knob, easy to use.
  • Anti-interference and stereo sound.
  • Crystal-clear treble.
  • Space-saving design, they can be conveniently placed next to your PC monitors without compromising on valuable desk space.
  • Built-in 2 speakers, balance and enhance the sound of your laptop, notebook, computer, PC, tablets, good for work, music, movies, games, etc.
  • Acoustic quality stereo sound, let your room filled with music, movies, or computer games.
  • No driver is needed for Windows, Linux and macOS, just plug and play!
  • Great for
    • Enhance any media experience while at home, office, kitchen, basement, or on the go.
    • Upgrade to your computer's weakened or faint internal speakers. Perfect USB Speakers for Windows PCs, Desktop Computer, Laptop.
    • Daily listening, static listening at home or office.
  • Material: Plastic
  • Output Power: 3W*2
  • Channel: 2.0
  • Frequency Response Range: 25Hz-20KHz
  • Separation: ≥40dB
  • Power Supply: USB 5V
  • SNR: ≥80dB
  • Voltage: 5V
  • Connectivity: USB
  • Number of speakers: 2
  • USB Cable Length: 47 inches
  • Connection radius: direct connection

What's in the box?

1 x 6W Stereo USB Power and Signal Speaker-Black
R329.90  Inc VAT
R439.90
Breadboard Jumper Wire Kit (140pcs) (loose Jumper Wire Kit)
This is the jumper wires that I have been dreaming of :) This is a box full of color-coded assortment of small jumper wires, great for prototyping. And it is pre-cut, stripped and bent at both ends with the standard breadboard spacing, perfect for classroom and when you do experiment with breadboard.

The best is it comes in a proper plastic box. There are 140 wires in total with different lengths. So get ready for it.

Features

  • Wide application: designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects.
  • Easy to use: all the colored jumper wires are pre-stripped and preformed right-angled, easy to insert into breadboard.
  • Complete specification: this kit includes 14 different lengths of jumper wires which can satisfy all your need.
  • Storage box: come with a free plastic box, keep your jumper wire kit organized, convenient for store and fetch.
  • These leads are flexible, durable and easy to connect and disconnect, ideal for prototyping use.


Specifications

  • Material: Plastic Metal.
  • Quantity: 140 pcs.
  • Colour: Rainbow color with red, yellow, green, white, blue, orange and grey.
  • Wire Length: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, 125mm (10pcs of each length).


What's in the box ?

140 x Jumper Wires
1 x Storage Box


You might also need....

Breadboard not included - Click HERE to get yours !
R69.90  Inc VAT
Pro's kit IC Extractor tool (chip extractor tool green)
Features

  • Appropriate for extracting PLCC, PGA, PCLL and IC packed by DIP from SOCKET or PCB
  • By gripping your hand you can extract the IC vertically and perfectly
  • Great for extracting dense IC
  • Metal and shielded plastic to avoid static charge damage to IC components
  • Small hook for easy extracting IC and installation
  • Perfect for repair man, such as TV / DVD / PC technicians or IC workers


What's in the box?

1 x IC chip extractor
R44.90  Inc VAT
Bracket for Ultrasonic HC-SR04 (acrylic bracket HC-SR04)
Everyone likes the SR04 ultrasonic range finder. This is the bracket for this useful distance sensor, enables you to mount the sensor to your mobile robot or project easily.

Watch the video at https://youtu.be/5LP2Xb6YkKc

Specifications

  • Colour: Clear
  • Material: Acrylic, please tear off the protective cover
  • Size: ~ 50mm x 36mm x 3mm
  • Stationary ultrasonic sensor modules
  • Matches HC-SR04 ultrasonic sensor module
  • Two mounting holes with M3 diameter (3.0mm)
  • Distance between two mounting holes: ~ 14mm

What's in the box?

1 x acrylic bracket
R11.90  Inc VAT
micro:bit Smart Watch Kit (without micro:bit) (Micro:bit Watch DIY)
This Smart Coding Kit is a wearable device based on micro:bit button cell extension board Pro, a DIY micro:bit watch can be easily made with a simple installing method.



Features

  • A DIY (Do It Yourself) Watch kit
  • Designed for micro:bit
  • Works with both the micro:bit V1 and micro:bit V2
  • Comes with sample code (in the guide)
  • Power with Coin Cell battery (CR2025 or CR2016)
  • Comes with Strap
  • Easy to assembly

What's in the box ?

1 x CR2025 Battery Holders
1 x Nylon watch strap
1 x micro USB wire
1 x MINI Screwdriver

You might also need....

You will need 2 x CR2025 batteries
and a micro:bit to complete the watch.

Resources







R295.90  Inc VAT
Non-Contact Voltage Detector, 90-1000VAC (non contact voltage detector)
Everyone need a test pen to make sure if the line is clear from high voltage electricity, especially when you are working with AC (Alternating Current) line. This is alternative to test pen where it can detect AC voltage without touching the wire/contact itself :) And Yes! It works.

Get it near to your AC wire or plug (few millimeter) and if there is AC voltage, the LED will start to blink and the on board buzzer will also buzz. And there LED (another LED) activation push button if you need eatra helping light when you work :)

It is powered by 2 x AAA (1.5V) battery, not included in the package.

Specifications

  • Sensitivity Range: 90V-1000V AC 50-60Hz
  • Voltage Indication: Beeper, LED Flashing
  • Power Requirement: 2 AAA batteries (not included)
  • Dimension: 160 x 17 x 18mm
  • Auto power-off:Yes
  • Low Battery Power Indication:Yes

Features

  • Wide Testing Range,within 90-1000V AC (Malaysia is 240VAC), All Electric Appliances in Your Family can be Tested by it.
  • High Efficiency. As long as voltage is detected, the LED in the tester pen will illuminates. It is easy to notice. And this voltage pen detector is powered by 2 AAA batteries(not included).
  • 100% Safe. The Voltage Pen Tester detects Voltage in a non-contact way, so do not worry about there could be any possibility of being shocked by the electricity.
  • High Quality. Being a home electrician , you will do the job better with it.
  • Easy to use. LED in the voltage tester pen can illuminate the working environment. You can use the Non Contact Voltage Detector in circuit breakers, lighting fixtures, switches, outlets, wires and anywhere you need it.


What's in the box?

1 x Voltage Test Pen

Resources

Pen Style Non Contact Alarm AC Voltage Detector with LED illumination (90V~1000V/2*AAA)
R74.90  Inc VAT
32 in 1 Precision Screwdriver Set (32 screwdriver set)
A tool for all DIYers :) Screwdriver set with 30 types of bits. With the magnetic socket, the bit will be magnetized and hold the screws and nuts when you are using it, super handy!

Features

  • Tools and sizes: 30 x bit (length: 2.7cm), 1 x handle( length: 10.5cm), 1 x extension bar (length: 10.1cm)
  • Screwdriver type:
    • Pentacle: 0.8, 1.2, 2.0
    • Flathead: 1.5, 2.0, 2.5, 3.0, 4.0
    • Tri-wing: 2.0, 3.0
    • Triangle: 2.0, 2.3
    • Hexagon: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0
    • U-shaped: 2.3
    • Philips: PH000, PH00, PH0, PH1, PH2
    • Torx: T4, T5, T6, T8, T9, T10;
  • Complete specifications screwdriver bit can adapt to a variety of areas of operations.
  • The bit with high-quality chromium-vanadium alloy steel, durable and wearable.
  • The handle is designed according to the shape of a hand, which is helpful to increase torque.


Specifications

  • Steel Material: Chromium-vanadium Alloy Steel
  • Magnetized socket to help hold screw and nuts during assembly or disassembly
  • Screw Head Type: All-in-One
  • Special function: Disassembling or Repairing Mobile Phone, PC or Toy
  • Application: Household Appliances, Mobile phone, Tablet PC
  • Package size (L x W x H): 12.20 x 7.50 x 3.30 cm or 4.84 x 3.00 x 1.3 inches


What's in the box?

30 x Bit
1 x Handle
1 x Extension Bar
R144.90  Inc VAT
Basic Soldering Wire and Rosin Paste Kit (basic solder wire rosin paste)
This is a Basic Soldering Wire and Rosin Paste Kit. It contains a set of soldering accessories including solder paste, solder wire and other bonus items for hobbyists, electronics and electrical learners, enthusiasts, beginners, and professionals. It is suited for purposes such as DIY soldering projects, electronics repairs, home crafts-making, and many more.

Specifications:

  • Solder wire and rosin paste kit
    • It includes the most commonly used diameter for lead solder and high quality soldering paste as accessories for electrical soldering.
  • 0.6mm diameter solder alloy and high-quality rosin flux that is essential in electrical soldering.
  • Bonus items included
    • Black and red wires and mini screwdriver and other bonus included inside.
  • Durable box included
    • It helps in keeping the contents organized, secured and for easy transport of the kit anywhere.


What's in the box?

1 x 50 g of 0.6mm diameter 60-40 Sn/Pb solder wire
1 x rosin paste

Bonus items:

1 x black AWG 22 tinned copper silicone wire
1 x red AWG 22 tinned copper silicone wire
2 x mini screwdriver


R232.90  Inc VAT
16 in 1 Building:bit Programmable Building Block Kits (building:bit building block kit)

16 in 1 Building:bit Programmable Building Block Kits


The Building:bit comes with the Super:bit Expansion board and it works with both micro:bit V1 and micro:bit V2(micro:bit not included)


16-in-1 superkit programmable building block kit is designed based on BBC micro:bit, which is composed of Super:bit expansion board, building block servo, Building block motor, battery, and 358 building block parts.

We combine building blocks with electronic devices to bring your building blocks to life, and they can also play music and realize colorful lights. On the one hand, it allows children to learn to program. On the other hand, it can also cultivate children's practical ability and stimulate creativity by assembling building blocks.

Features

  • Compatible with both micro:bit V1.X and V2.
  • The building:bit kit is designed based on BBC micro:bit, equipped with Super:bit professional expansion board.
    • The most popular microcontrollers for children are suitable for STEAM education.
    • Super:bit expansion board specially designed for micro:bit can perfectly integrate with building blocks, build any shape, and drive building block servo, motor, RGB lights and other devices.
  • 16 kinds of building block models full-color printing project instruction manual
    • The building block parts of this kit are dominated by blue and white, the whole is full of science and technology, which can be assembled into N models.
    • The manual includes assembly steps of 16 kinds of models and basic instruction content for programming.
  • MakeCode programming Python programming, suitable for users of different ages.
    • MakeCode programming: It can effectively reduce the learning threshold and improve children's interest in learning by dragging and splicing colorful building blocks
    • Python programming: A string of character commands control the building blocks, writing a wonderful chapter belonging to the Makers and building block enthusiasts.
  • Support App/game handle remote control
    • When using different equipment to interact with the building blocks, the user can experience the fun brought by technology.
  • Compatible with Lego building block, various gameplays
    • 16 kinds of models with up to 80 gameplays, such as spider walking, helicopter propeller rotation, car wriggling, cannonball shooting, etc.
    • Users can also expand through more Lego bricks and build more interesting shapes.
  • Programming language: MakeCode graphical programming / Python programming








Specifications


  • Remote control method: APP/micro:bit gamepad
  • Main material: ABS
  • Package Weight: about 1400g
  • Packing box size: 288 * 213 * 68mm
  • Battery type: Rechargeable lithium battery
  • Lifetime: 120 minutes
  • Battery energy: 3.7V / 1200mAh
  • Working temperature: 4 ~ 40 ℃
  • Onboard function: RGB lights, buzzer, etc.
  • Number of building blocks: 358 high-precision building blocks
  • Motor / Servo: 2 motors, 1 servo


What's in the box?

1 x 16 in 1 Building:bit kit

Resources


R2,799.90  Inc VAT
R2,899.90
3V-5.5V HC-SR04P Ultrasonic Ranging Module (sensor ultrasonic 3V)
Ultrasonic Range finder has been very useful in many electronic project. It is low cost and teaches us the propagation of sound wave, learning about science while completing your project:) While it is popular, HC-SR04 ultrasonic sensor is 5V operated, so it is difficult to be used with 3.3V system like NodeMCU, Wemos, Raspberry pi, micro:bit or 3.3V Arduino board. No more waiting, we bring you the 3.0V to 5.5V Ultrasonic Ranging Module.

Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires, we'll just have to make do with these handy 3V Ultrasonic Sonar Distance Sensor and a pair of flippers. These ubiquitous sensors are really common in robotics projects, but they can also be used for automation, interactive art and motion sensing. They work at about 2cm to 450cm(5V) or 400cm(3V) away, but we think 10cm-250cm will get you the best results.



These sensors are fast, fairly easy to use, and low cost. Unlike the more common HC-SR04 series, this model can be powered by 3V or 5V and the logic level will be the same. This makes this model great for use with just about any microcontroller or microcomputer. And, its HC-SR04 software compatible so just plug it in and it works the same! (Note the size is different from the HC-SR04 so you may need to make mounting adjustments)

Of course you can also use with 5V system such as Arduino UNO, Arduino Mini and Maker UNO.

Features

  • Voltage: 3V - 5.5VDC
  • Current: 2.2mA
  • Measuring Range: 2cm - 450cm
  • Working Temperature: 0ºC to 70ºC
  • Compatible with HC-SR04 Ultrasonic Sonar Distance Sensor
  • Properly labelled pin assignment
  • Arduino and Raspberry Pi compatible

What's in the box?

1 x 3V - 5.5V Ultrasonic Ranging Module

Resources



Perfect for use with your 3.3V system like NodeMCU, Wemos, Raspberry pi and micro:bit
R39.90  Inc VAT
XBEE Shield with RS485 for Arduino UNO (XBEE RS485 Arduino UNO)
Arduino is an open-source controller board, popular among electronic enthusiasts for making interactive projects. But for those who are not familiar with electronics, adding circuits to Arduino may be tricky. That’s why keyestudio develop this XBEE sensor shield. It can help you connect most sensor modules to Arduino pretty easily. The shield extends the digital and analog interfaces into 3PIN interface. It also comes with RS485 communication and XBEE Bluetooth module interface.

You can change the communication way via the jumper cap on the shield. If all the three jumpers are connected to APC, the shield will realize the XBEE Bluetooth communication. If all jumpers are connected to 485, realize the RS485 communication function.

Onboard also comes with a reset button, a D13 indicator, and some common communication pins of 2.54mm pin pitch, such as serial port, IIC, and SPI communication pins.

Besides, it also has two 2pin terminal blocks. One is VIN GND terminal block, used to supply the external power for the UNO R3 control board, with an input voltage of DC 7-12V. The other is the Servo_PWR terminal block, used for VCC voltage input/output. If not connecting the external voltage, supply 5V for the shield; if connecting the external voltage, VCC voltage is actually the external input voltage.


Features and specifications

  • Compatible with Arduino UNO R3.
  • Comes with 14 digital input/output pins.
  • Comes with 6 analog IO pins
  • Onboard comes with a digital port power terminal block
  • Comes with an external power input terminal block and a input contact pin ( power on the control board with DC 7-12V)
  • Comes with an RS485 interface.
  • Comes with a reset button
  • Comes with a D13 indicator
  • Comes with a XBEE Bluetooth interface
  • Can connect three jumper caps (APC and 485) to switch the XBEE Bluetooth communication or RS485 communication.
  • Comes with I2C, serial port and SPI communication pins
  • Onboard comes with a DC 3.3V output pin
  • Dimensions: 58.5mm x 57.5mm x 20mm
  • Weight: 26.2g

 

Pinout diagram

What's in the box?

1 x XBEE Shield with RS485 for Arduino UNO 

 

Resources

Product wiki page
R195.90  Inc VAT
Round Panel Mount Latch Push Button (Red) (12mm red latch button)
General purpose 'push-to-on button', self latch on push button. Single Pole Single Throw (SPST), normally open type. Press to connect and it will latch on itself. To disconnect, press the button to release.

Features and Spec

  • Normally Open (NO) type
  • Contact rating :125VAC 3A
  • Switch type: Push and lock
  • Weight: 10g
  • Material: Plastic (body and button)
  • Button color: Red
  • Pitch : 3mm
  • Thread diameter: 12mm
  • Button diameter: 9mm
  • Height: 25mm (body height excluding terminal)



What's in the box?

1 x Round Panel Mount Latch Push Button (Red)
R16.90  Inc VAT
HAT - Grove Base for Raspberry Pi (RPi grove base HAT)
Today, the grove series of sensors, actuators, and displays have grown into a large family. More and more grove modules will join the whole Grove ecosystem in the future. We see the Grove helps hundreds of thousands of makers, engineers, teachers, students, and even artists to learn, to make, to create... Now we bring you the Grove Base Hat for Raspberry Pi to make the Grove module compatible with more platforms. In another word, we bring the Raspberry Pi the whole Grove System.




The Grove Base Hat for Raspberry Pi provides a Digital/Analog/I2C/PWM/UART port to meet all your needs. With the help of the build-in MCU, a 12-bit  8 channel ADC is also available for Raspberry Pi. Currently, more than 60 groves have supported the Grove Base Hat for Raspberry Pi.

Compared with Grove Pi , the Grove Base Hat for Raspberry Pi does not use the ATMEGA chip for data conversion, so it runs faster. We provide the Raspberry Pi driver for Grove Base Hat for Raspberry Pi. What's more, Grove Base Hat for Raspberry Pi is much more cost-effective. In other words, we lowered the threshold for using the grove series on the Raspberry Pi. We hope you like it, enjoy :D

Pinout:


  • GPIO:
    The same pinout as the raspberry pi.
     
  • PWM(pulse-width modulation):
    The Grove PWM Port connects to GPIO/BCM pin12(PWM0) and GPIO/BCM pin13(PWM1), which is the hardware PWM pin of Raspberry Pi, in addition, you can use all the GPIO pins as the soft PWM pin.
     
  • UART: 
    The Grove UART port connects to the GPIO14(UART0 TX) and GPIO15(UART0 RX). UART is commonly used on the Pi as a convenient way to control it over the GPIO or access the kernel boot messages from the serial console (enabled by default).It can also be used as a way to interface an Arduino, bootload ATmega, ESP8266, etc with your Pi.
     
  • Digital: 
    There are 6 digital Grove sockets in this board, normally the yellow wire(which connect to the top pin of the 4 pins Grove socket as) of Grove cable is the signal wire, so we name the digital Grove port D5/D16/D18/D22/D24/D26.
     
  • Analog: 
    As we know, there is no ADC in the Raspberry Pi, so it can not work with analog sensors directly. Now with the help of the build-in MCU STM32, the Grove base HAT can work as an external 12-bit ADC, which means you can use the analog sensor with your Raspberry Pi. Even more pleasing is that not one but four analog Grove sockets are available.
    The analog sensor inputs the analog voltage into the 12-bit ADC. After the ADC converts the analog data to digital data, it input the digital data to the Raspberry Pi through the I2C interface.
     
  • I2C: 
    There are three I2C ports available in this board, they all connect to the I2C pin of the raspberry directly. You can consider this part as an I2C hub. Most of Seeed's new grove modules have an I2C interface, you may find those I2C three ports are extremely useful.
     
  • SWD: We use the SWD port to burn the firmware to this hat. In addition, you can see 3 GPIO pins in this section, i.e., pin 9/pin 10/pin 11. Those three pins do not use by any Grove port, you are free to use them without worrying about pin conflicts.

Note:

  1. All the silkscreen layer pin number beside the Grove port is the BCM pin number. The difference between BCM pins and the physical pins please refer to here.
  2. Compared with hardware PWM, the software PWM isn't so accurate and will have trouble at high frequencies.
  3. The GPIO/BCM pin18 is also marked as PWM0. The GPIO/BCM 12 and the GPIO/BCM 18 share the same PWM channel, so they can't be set to different rates.
  4. The audio jack output also uses PWM 0 and PWM 1, so you can't have an audio output on that socket and use the PWMs at the same time.
Features and specifications

  • Support Raspberry Pi 2B, 3B, 3B and 4
  • build-in MCU
  • 12-bit ADC
  • Multi-type Grove port
  • Operating Voltage: 3.3V
  • MCU: STM32/MM32
  • ADC: 12-bit 8 channel
  • Grove Ports:
    • 6 x Digital
    • 4 x Analog
    • 3 x I2C
    • 1 x PWM
    • 1x UART
  • Raspberry pi communication bus: I2C
  • I2C Address: 0x04/0x08

 

What's in the box?

1 x HAT - Grove Base for Raspberry Pi


Resources

R439.90  Inc VAT
Plusivo BJT Transistors Assortment Kit (Plusivo transistor kit)
This is the perfect kit for experimenting with transistor, it includes the most common PNP and NPN transistors: 2N3904, 2N3906, S8050, 2N2907, S8550, 2N2222, BC337, C1815, BC327, A1015.


With this 210 pcs bipolar transistor pack you will never have to worry about not having the right transistor for your circuit. The transistor kit comes with a 250 pcs bonus resistor assortment kit that includes the most commonly used resistor values, always useful for your electronic circuits.

Having a well-designed transistor kit on hand means no more guesswork and frustration when designing and testing your circuits.
You can depend on it to always find the transistors you need.

Features

  • A transistor kit that includes most commonly used transistor types.
  • A complete transistors assortment kit, so that you always have the PNP and NPN transistors you need.
  • A premium BJT transistor kit that is easy to store and use. It comes with an organizer box.

What's in the box?

1 x 10 compartments plastic box
21 x Transistor 2N3904
21 x Transistor 2N3906
21 x Transistor S8050
21 x Transistor 2N2907
21 x Transistor S8550
21 x Transistor 2N2222
21 x Transistor BC337
21 x Transistor C1815
21 x Transistor BC327
21 x Transistor A1015

Bonus Pack (in paper box)

10 x Resistor 47 Ω
10 x Resistor 100 Ω
10 x Resistor 220 Ω
10 x Resistor 330 Ω
10 x Resistor 470 Ω
10 x Resistor 680 Ω
10 x Resistor 1 kΩ
10 x Resistor 2.2 kΩ
10 x Resistor 3.3 kΩ
10 x Resistor 4.7 kΩ
10 x Resistor 6.8 kΩ
10 x Resistor 10 kΩ
10 x Resistor 22 kΩ
10 x Resistor 33 kΩ
10 x Resistor 47 kΩ
10 x Resistor 68 kΩ
10 x Resistor 100 kΩ
10 x Resistor 330 kΩ
10 x Resistor 470 kΩ
10 x Resistor 680 kΩ
10 x Resistor 1 MΩ
R149.90  Inc VAT
Raspberry Pi Zero/2 W Heatsink Enclosure (pi 0/2 W heatsink enclosure)
Note: The Raspberry Pi board is NOT INCLUDED. Please get them separately.

Say hello to yet another passive cooling aluminum case for Raspberry Pi Zero W and Raspberry Pi Zero 2W boards! This beautiful black anodized aluminum case features a heatsink design on top and passively cools the Pi using embedded solid aluminum cores and a thermal pad located on top of the processor.

With incredible silent passive cooling performance, no fan noise, full port access, WiFi window, striking heatsink-like design, and full aluminum construction for the top cover, it is a perfect enclosure to keep your Pi Zero cool and running smoothly even while running on full load! :)





Ports Configuration

Raspberry Pi Zero W/2W Heatsink Enclosure for Straight Headers





Features

  • Use high-quality materials to provide the best protection for your Raspberry Pi.
  • The aluminum alloy shell is sturdy and durable, and the heat conduction is fast.
  • The upper cover of the casing is designed with thermally conductive columns to achieve overall heat dissipation through the thermally conductive adhesive and chip bonding.
  • Small size and beautiful appearance.
  • The bottom of the shell is made of acrylic material, smooth and beautiful.
  • Does not affect WiFi and Bluetooth-compatible signals.
  • Note: If you do not want to use the GPIO function, it is recommended to choose the enclosure for right-angle headers.

Specifications

  • Compatible with Raspberry Pi Zero W and Raspberry Pi Zero 2W
  • Dimensions: 65mm x 13mm x 30mm



What's in the box?

1 x RPi Zero Heatsink Enclosure
1 x Thermal paste
1 x Straight headers
4 x Screws

R159.90  Inc VAT
2.5A USB A to Type C Cable black 1m (black USB A to C Cable 1m)
USB-C is fantastic! What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! USB-C has a minor, yet genius modifications that allow them to be plugged into their ports regardless of orientation. No longer will you fight the USB "super position" where both orientations of your plug seem incorrect. A simple solution to a problem that nearly everyone has faced.

As announced Raspberry Pi 4 model B has upgraded the power input port to USB-C and you will need this cable to power it. Although it is terminated with USB-A 2.0, the power wires (VUSB and GND) have thicker gauge and we have tested it. This cable can delivers up to 2.5A to Raspberry Pi 4 model B.

Supporting USB 2.0 speeds and charging up to 2.5A, this 1 meter cable is perfect for embedded enthusiast that need the flexibility of a good cable and the wonderful feel of a reversible USB-C & USB-A connection. It is perfect if you want to boot up Raspberry Pi 4 Model B from a laptop. Not to forget to connect microcontroller development board like M5Stack.

This cable has the D /D- wires along side large-gauge VBUS/GND wires. Although it is rated for 2A, we've successfully pulled 2.5A@5V with minimal voltage drop.

Features

  • Standard USB-A connector
  • Reversible USB-C connector
  • USB 2.0 standard
  • 1 meter cable length


What's in the box?

1 x black USB A to C Cable 1m
R69.90  Inc VAT
USB A to USB B cable 1m (USB A to B Arduino 1m)
The staple of any USB connection, the USB A to B cable connects any standard host device (computer, hub, or controller) to any standard peripheral (printer, scanner, external drive).

Specifications

1. USB 2.0
2. Connector: USB 2.0-A male > USB 2.0-B male
3. Cable length: 1m
4. For use with Arduino Uno
5. Colour: Black

What's in the box?

1 x USB A to B cable

R29.90  Inc VAT
Dual Output Cable - USB A to 2.1mm DC Barrel & Micro USB (USB to jack and micro)
Features

  • USB 2.0 type A to USB micro B and 2.1mm DC Barrel
  • Data and power is connected to USB micro B
  • Power is connected to DC Barrel Plug
  • Cable length: ~ 1 meter
  • Colour: Black

 
What's in the box?
 
1 x USB A to 2.1mm DC Barrel & Micro USB
R49.90  Inc VAT
DIY Wooden Music Box STEM Kit (wooden music box)

Note: Not suitable for children under 4 years old!

DIY Wooden Music Box STEM Kit is a music box that works by rotating a metal cylinder that has protruding pins that pluck every prong of a steel comb. The sounds that we hear are actually generated from the vibration of the prongs when the protruding pins make contact.


                       


Let your kids experience the wonder of music creation through this DIY 13th century musical instrument! This DIY kit is simple enough to be built by 6 years old children.

Features

  • Do It Yourself Wooden Music Box
  • Suitable for age 6 years old and above
  • Come with everything needed to assemble the music box
  • No power or battery needed
  • Learn the mechanism of a wind-up music box
  • Music: Carrying You (From "Castle in the Sky" by Studio Ghibli)

What's in the box?


Wooden parts for the music box
Wood glue
Some screws
Some double-sided tape
1 x Screwdriver
1 x Music instrument
1 x Mirror
1 x File for sanding



Resources

  • Download the softcopy instruction manual (English) here
  • Instruction video here
R94.90  Inc VAT
Nozzle Cleaning Stainless Steel Needles 0.4mm 5pcs (0.4mm SS nozzle needles)
Nozzles getting clogged is a common issue after long printing runs, especially nozzle sizes below 0.5mm. This non-breakable stainless steel needle is specially designed for clearing the 0.4mm nozzle blockage without detaching the nozzle at all. Make sure the hotend is heated up before insert this needle.

If your nozzle clogging issue still exists frequently after several clearing processes, a new nozzle replacement is needed for this case. 

Features

  • Made of stainless steel
  • Flexible bending
  • Non-breakable
  • Precise diameter size, +- 0.01mm

What's in the box?

5 x 0.4mm Nozzle Cleaning Stainless Steel Needles
1 x Clear plastic tube with a blue lid
R38.90  Inc VAT
Per Page      81 - 100 of 169