Search
Search Criteria
Products meeting the search criteria
Want to adjust the angle of your HDMI connection? This handy adapter makes it easy!
This is an A-A cable, that means both ends have the same polarity, you can flip the cable around and it will always connect pin 1 to pin 1.
This photosensitive sensor module operates effectively within a supply voltage range of DC 3.3-5V, making it suitable for various applications and systems requiring different power levels.
NFC NTAG213 tag stickers are small adhesive tags that use Near Field Communication (NFC) technology to wirelessly transfer data when placed close to a compatible device, like a smartphone.
Bistable refers to a system, circuit, or device with two stable states (e.g., ON/OFF, 1/0) that remains in one state until explicitly triggered to switch to the other
This 4-wire cable is a little over 150mm long and fitted with JST-SH (Qwiic/STEMMA QT) female 4-pin connector on one end, and female jumper wires on the other.
This 4-wire cable is a little over 300mm long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
These are handy for extending a Stemma QT or Qwiic cable if you don't have one long enough for your project, or to protect a port if you're regularly swapping out sensors/dev boards. The pin connections are 1-1, matching both sides.
This 4-wire cable is a little over 200mm long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
This Qwiic/STEMMA GPIO connector from Ozzmaker allows you to easily connect Qwiic or STEMMA enabled modules to a Raspberry Pi, without the need for soldering.
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly into the Pi's I2C bus with no soldering required and the thin PCB design allows for it to be sandwiched on your Pi GPIO with other HATs!
Portable by design, F2 moves easily across different scenarios, so you can create and sell wherever business happens.
Male to Female HDMI-compatible Adapter Converter 90 Degrees RIGHT (HDMI m2f 90 RIGHT)
Want to adjust the angle of your HDMI connection? This handy adapter makes it easy!
JST-PH 2-pin Jumper Cable - 200mm long(Opposite direction) (JST-PH 2pin 200 opposite)
This is an A-A cable, that means both ends have the same polarity, you can flip the cable around and it will always connect pin 1 to pin 1.
Adjustable Photosensitive Sensor Module with Light Detection Board (photo adj sensor module)
This photosensitive sensor module operates effectively within a supply voltage range of DC 3.3-5V, making it suitable for various applications and systems requiring different power levels.
NFC Ntag213 Tag Stickers 13.56MHz 144 Bytes Programmable Memory(10 pack) (13.56 RFID sticker(10))
NFC NTAG213 tag stickers are small adhesive tags that use Near Field Communication (NFC) technology to wirelessly transfer data when placed close to a compatible device, like a smartphone.
5V Single Bond Button Bistable (Latching) Relay Module (5V relay bistable)
Bistable refers to a system, circuit, or device with two stable states (e.g., ON/OFF, 1/0) that remains in one state until explicitly triggered to switch to the other
STEMMA QT / Qwiic JST-SH 4-pin Cable to Female Jumper Wires (150mm) (150mm stemma/Qqiic female)
This 4-wire cable is a little over 150mm long and fitted with JST-SH (Qwiic/STEMMA QT) female 4-pin connector on one end, and female jumper wires on the other.
STEMMA QT/Qwiic JST-SH 4-Pin Cable (300mm) (300mm stemma/Qwiic cable)
This 4-wire cable is a little over 300mm long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
4-Pin Stemma QT/Qwiic JST-SH Cable Joiners (4-Pack) (Stemma/Qwiic Joiners)
These are handy for extending a Stemma QT or Qwiic cable if you don't have one long enough for your project, or to protect a port if you're regularly swapping out sensors/dev boards. The pin connections are 1-1, matching both sides.
STEMMA QT/Qwiic JST-SH 4-Pin Cable (200mm) (200mm stemma/Qwiic cable)
This 4-wire cable is a little over 200mm long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
Qwiic/STEMMA QT GPIO Connector and Cable for Raspberry Pi (Stemma/Qwiic GPIO adapter)
This Qwiic/STEMMA GPIO connector from Ozzmaker allows you to easily connect Qwiic or STEMMA enabled modules to a Raspberry Pi, without the need for soldering.
SparkFun Qwiic SHIM for Raspberry Pi(Fully Cross-Compatible with Adafruit's STEMMA QT ecosystem) (Qwiic GPIO shim)
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly into the Pi's I2C bus with no soldering required and the thin PCB design allows for it to be sandwiched on your Pi GPIO with other HATs!
xTool F2 Portable Laser (xTool F2)
Portable by design, F2 moves easily across different scenarios, so you can create and sell wherever business happens.