Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
UNO R3 SMD (CH340G) MEGA328P for Arduino UNO R3 + USB CABLE ATMEGA328P-AU Development board (UNO SMD fixed IC)
Product introduction
UNO R3 is a microcontroller board based on the ATmega328P.

It has:
- 14 digital input/output pins (of which 6 can be used as PWM outputs)
- 6 analog inputs
- a 16 MHz quartz crystal
- a USB connection
- a power jack
- an ICSP header
- a reset button.

It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.


Package Includes:

1 x Arduino Uno SMD
1 x Headers
1 x USB cable

Getting started with Arduino products
R159.90  Inc VAT
LilyPad 328 Main Board ATmega328P ATmega328 16M For Arduino (Lilypad)

This is the LilyPad main board consisting of an ATmega328 using 5V DC power.

The latest version of the LilyPad supports automatic reset for even easier programming.

The back side of the LilyPad is now completely flat! We now use a surface mount programming connector to keep the header from poking through.



This version of the LilyPad now uses the new ATmega328 at 8MHz. 0016 supports the Pro Mini 328/8MHz/16MHZ. Use this setting when using this new LilyPad 328.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing.

Various input, output, power, and sensor boards are available. They're even washable!

 

Package Includes:
1 x 328 Main Board

R69.90  Inc VAT
ATMEGA8 ATMEGA8A-PU DIP28 (Arduino IC)
Description:

The ATMEGA8A-PU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 8kb ISP flash memory with read-while-write capabilities, 512B EEPROM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte oriented two-wire serial interface, 6-channel 10-bit A/D converter (8-channel in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator, SPI serial port and five software selectable power saving modes. The device operates between 2.7 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

  •     High-performance, Low-power AVR® 8-Bit Microcontroller
  •     Advanced RISC Architecture
  •     High Endurance Non-volatile Memory Segments
  •     Atmel QTouch® Library Support
  •     Power-on Reset and Programmable Brown-out Detection
  •     Internal Calibrated RC Oscillator
  •     External and Internal Interrupt Sources
  •     Idle, ADC Noise Reduction, Power-save, Power-down and Standby Sleep Modes
  •     2.7 to 5.5V, 0 to 16MHz Operating Voltage
  •     3.6mA Active, 1.0mA Idle Mode and 0.5µA Power-down Mode Power Consumption

Applications:

Building Automation, Consumer Electronics, Motor Drive & Control, Industrial, Automation & Process Control, Metering
R74.90  Inc VAT
Pro Mini ATMEGA328P 5V/16MHz for arduino (Pro Mini ATMEGA328P)
It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the “RAW” pin and not VCC.

 

Features:

  •     ATmega328 running at 16MHz with external resonator (0.5% tolerance)   
  •     0.8mm Thin PCB   
  •     USB connection off board   
  •     Supports auto-reset   
  •     5V regulator   
  •     Max 150mA output   
  •     Over current protected   
  •     Weighs less than 2 grams!   
  •     DC input 5V up to 12V   
  •     On board Power and Status LEDs   
  •     Analog Pins: 8   
  •     Digital I/Os: 14   

Getting Started
Getting started with Arduino products
R119.90  Inc VAT
ATmega328P Arduino Compatible Nano V3 Improved Version (Arduino nano)
This Arduino Nano comes with the old bootloader

Specifications:

Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz

Package includes:

1 x Arduino Compatible Improved Version Nano V3.0 with headers pre-soldered

Getting started with Arduino products
R109.90  Inc VAT
Geekcreit® ATmega328P Arduino Compatible Nano V3 + Nano Shield Expansion Board Kit (nano expansion kit)
Changed the USB chip, improve the download speed and stability of WIN7/WIN8
Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz

NANO Shield Expansion Board Description:

This Nano Mult-Function expansion board is designed specially for Arduino Nano, solving the problem of confusing wiring when a variety of sensors connected.
Lead out all digital IO port and analog IO port, each one with standard positive and negative power interface.
Lead out the I2C interface of mainboard for convenient connection.
Increasing the DC power supply interface. Nano USB interface supply current is actually only 50MA, to bring high-current devices, such as the steering, is obviously insufficient. So in the DC power connector provide external power supply to ensure the stability of equipment operation.

Package includes:

1 x ATmega328P Arduino Compatible Nano V3 with USB cable
1 x NANO Shield Expansion Board

Getting started with Arduino products
R189.90  Inc VAT
LCD Keypad Shield LCD1602 LCD 1602 Module Display For Arduino ATMEGA328 ATMEGA2560 raspberry pi UNO blue screen (buttons blue backlight)
Description
  •     This is a basic 16 character by 2 line display.   
  •     Utilizes the extremely common HD44780 parallel interface chipset.   
  •     Interface code is freely available.   
  •     Blue Backlight with white words.   
  •     uses 4 Bit Arduin LCD Library.   
  •     Size:8cm x 5.9cm - 3.15inch x 2.32inch   


Package Content:

1 X Keypad Shield 1602 LCD

DFRobot WIKI
R69.90  Inc VAT
Per Page      1 - 7 of 7
  • 1