Search
Search Criteria
Products meeting the search criteria

The Spy Camera for Raspberry Pi is smaller than a thumbnail with a high enough resolution to see people, or ghosts, or whatever it is you're looking for. It's about the size of a cell phone camera - the module being just 8.5mm x 11.3mm - and has a stick-on back so it's easy to mount in a doorbell or behind a teddy bear's eye (might as well be creative!)
The camera comes with a 289mm (11.4") long cable so you can extend and mount your Pi away from the camera. Like the Raspberry Pi Camera Board, it attaches to your Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data.
The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
CSI camera port works with Raspberry Pi 3/4 B
Sensor: OV5647, 5MP 2592x1944 pixels
Pin: 22
Peach: 0.5mm
AVDD: 2.7-3.3V (Typical2.8V)
DVDD: 1.45-1.8V
DOVDD: 1.7-3.3V
Lens Structure: 4P (650nm)
EFL: 3.52
FNO: 2.8
FOV: 70 degree
Output Format: YUV or RAW RGB
1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
F2.9 lens, 3.4 mm focal length
53.50 degrees horizontal, 41.41 degrees vertical field of view
Approx. dimensions of circuit and camera: 60 x 11.5 x 4.5mm
What's in the box?
1 x camera module
Support
Please download the camera user guide here.
Description
The OKdo Raspberry Pi 4 4GB Model B Starter Kit is an exclusive 8-piece kit that includes everything you need to start discovering the world of the Raspberry Pi. It includes essential hardware in a single box, access to an online step-by-step guide, and projects to get up and running faster than ever, effortlessly.
Details
Each kit contains the best performing Raspberry Pi 4 Model B board along with a reliable power supply, 2 X micro HDMI cables for dual display, SD Card Reader and a 32GB micro SD card with NOOBS operating system preloaded. As well as 3 x heat sinks and a unique aluminium case with an inbuilt fan for better thermal management. With all of the most current components on the market included in this Raspberry Pi 4 kit, it’s perfect for anyone interested in electronics at any level of experience, even beginners.
What’s in the box?
- Raspberry Pi 4 Model B 4GB board.
- 5.1v Power supply with 4 x interchangeable mains adaptors.
- USB to USB-C cable with in-line switch.
- 2 x Micro HDMI to HDMI cables.
- SanDisk 3D Gen3 X3 256Gb 2-Plane NAND Flash Die for 32GB MicroSD Card. (with NOOBS 3.1.1 preloaded)
- SD card reader.
- 3 x Heat sinks.
- Aluminium Raspberry Pi case with an integrated fan.
The Raspberry Pi
Raspberry Pi’s are compact computer boards roughly the size of a credit card, offering endless opportunities. The Pi was first designed to be a user-friendly alternative to more complicated computer boards but giving the same high specification output, allowing for the customer to do whatever they want with it. Whether you’re planning on introducing programming to children, or an engineer looking to make a complex-controlled system, simply plug into a monitor, keyboard, mouse and power supply and you’re ready to go.
The Raspberry Pi 4 is uniquely designed with high specifications to allow the product to carry out multiple tasks for increased usability:
- Processor: Broadcom BCM2711 Processor Quad-core A72 (ARM v8) 64-bit SoC
- Memory: 4GB LPDDR4 SDRAM
- Bluetooth: Bluetooth 5.0WiFi: 2.4GHz/5.0GHz IEEE 802.11ac
- Ethernet: Gigabit Ethernet
- USB: 2 x USB 2.0 ports, 2 x USB 3.0 ports
- Connection: 40-pin GPIO Header
- HDMI: 2 x micro HDMI ports (up to 4Kp60 supported)
- Video: 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port
- Audio: 4 Pole stereo output and composite video port
- Multimedia: H.265 (4Kp60 decode), H.264 (1080p60 decode, 1080p30 encode. OpenGL ES 3.0 graphics.
- Storage: microSD card slot for loading operating system and data storage
- Input power: 5v DC via USB-C Connector (min 3A), 5v DC via GPIO header. POE enabled (PoE HAT required)
- Operating Temperature: 0 to 50°C
Aluminium Case
This slick protective case made from aluminium includes 3 heat sinks and an integrated fan to ensure the Pi 4 stays cool and runs at maximum efficiency. Cut-outs are made on the case for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the MicroSD card.
Memory?
You won’t be able to forget about this kit… With 4GB LPDDR4 SDRAM built on-board and a 32GB MicroSD card also included, this kit ensures speed and versatility. The 32GB card included meets the SD 5.1 Standard and has an R/W performance: up to 100/25MB/s.
FAQ’s
What’s the difference between to the Raspberry Pi 3b+ and the Raspberry Pi 4 Model B?
Raspberry pi 4 is the newest model of the raspberry pi series. Raspberry Pi 4 takes Pi to another level, with a performance that’s good enough to use in a pinch as a desktop PC, plus the ability to output 4K video at 60 Hz or power dual monitors. New features include:
- A faster processor and GPU,
- More and faster RAM,
- The addition of USB 3 ports,
- Dual Micro HDMI ports instead of a single HDMI connection and support for 4K output,
- A higher bus speed that enables USB 3 support also allows the on-board Ethernet port to support true Gigabit connections (125 MB/s)
Where can I learn how to set up my Raspberry Pi Kit?
Visit our getting starter guide here, to get up and running. Then head to our projects hub for innovative ideas on what to do with your Raspberry Pi kit.
Add some more goodies to your officially branded merch collection with this Raspberry Pi stainless steel engraved pen.
What's in the box?
1 x official stainless steel pen
This Raspberry Pi Zero camera features a wide 160° fisheye lens and uses the same OV5647 chip as the standard Raspberry Pi camera! It's therefore able to deliver a crystal clear 5MP resolution image, or 1080p HD video recording at 30fps!
Specifications
- CSI camera port works with Raspberry Pi Zero
- Raspberry Pi Camera, supports all revisions of the Pi
- OV5647 sensor 5MP 2592x1944 pixels
- CCD size : 1/4inch
- Focal Length : 2.1mm, f2.0 Lens
- Field of View : 160 degree (while other normal cameras are typically 72 degree)
- Sensor best resolution : 1080p
- Support 1080p/30fps, 720p/60fps and 480p/90fps video record
- Dimensions: 60mm × 11.5mm × 10.5mm
What'sin the box?
1 x Camera module
Support
Please download the camera user guide here.
The Okdo Raspberry Pi 4 basic Kit UNI Version contains everything you need to get up and running with a Raspberry Pi 4 and is perfect for someone looking to start their Pi adventure. The kit includes our most popular accessories to help you on your coding journey, all provided neatly inside an OKdo box.
What's in the box?
1 x Raspberry Pi 4 – 4GB
1 x 2m micro-HDMI cable
1 x 32GB SD card preloaded with NOOBS software
1 x OKdo universal power supply
1 x Okdo exclusive black case
The module uses a full-size 15-pin connection which is compatible with Raspberry Pi Model B boards (Pi 4, 3B+, 3, 2, B+). The short size makes it handy for compact Raspberry Pi photography projects, custom 3D printed cases or just simply playing with the various camera commands with your bare board - without the need for a camera case.
Specifications
Compatible with Model B Raspberry Pi boards (Pi 4, 3B+, 3, 2, B+)
OV5647 Sensor
Compatible with libcamera and raspicam commands
Compact size - just 35mm long!
Includes foam gaskets for creative mounting
Images up to 2592x1944
Video up to 1920x1080
Sensor: OV5647
Pixels: 5MP
Focal length: ~3.9mm
CMOS size: 1/4"
Field of View: ~73°
Aperture: F2.4
Depth of Field: ~20cm
Distortion: < 1.5%
Still Image: up to 2592x1944
Video:
1920 x 1080p @30
1280 x 720p @60
640 x 480p @60
640 x 480p @90
What's in the box?
1x Mini Camera Module
Resources
- How to Install & Use the Raspberry Pi Camera Module (different camera but the process and commands are the same)
- Libcamera and the legacy Raspicam stack
- Libcamera introduction and usage
- Raspicam (legacy) introduction and usage
- OctoPrint for 3D print monitoring
- MotionEyeOS Raspberry Pi CCTV
The Official Raspberry Pi Keyboard is finally here!
This sleek and stylish keyboard from the team at Raspberry Pi includes three in-built USB 2.0 type-A ports for powering other peripherals (such as the official Raspberry Pi mouse)!
Please Note. This keyboard is available in 6 language formats: UK, US, DE, FR, ES & IT. This model is the US version as used in South Africa.
Keyboard Specification:
- 79-key keyboard (78-key US keyboard)
- 3 USB 2.0 type-A ports for powering other peripherals
- Automatic keyboard language detection
- USB type-A to micro USB type-B cable for connection
- Compatible with all Raspberry Pi products
- Ergonomic design for comfortable use
- Available in Red/White and Black/Grey
Description:
This Starter Kit is based around the Raspberry Pi Pico development board which features the Raspberry Pi RP2040 microcontroller chip.
Whats in the box:
- The Raspberry Pi Pico microcontroller
- USB A male to USB micro B male 1.5m cable
- 2.54mm Pitch Single Row Pin Header 40-PIN - Black
- 5.1V 2.5A Official Power Supply white for Pico
Resources:
Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts
The Official Raspberry Pi Mouse is finally here!
This sleek, stylish and ergonomic mouse from the team at Raspberry Pi includes three buttons, two main ones for right and left click, and a scroll wheel with button for scrolling. . . and more clicking. . . what more do you need from a mouse!
Mouse Specification:
- Three-button optical mouse
- Scroll wheel
- USB type-A connector
- Compatible with all Raspberry Pi products
- Ergonomic design for comfortable use
- Available in Black/Grey and Red/White
Description:
The Official Raspberry Pi Mouse is finally here!
This sleek, stylish and ergonomic mouse from the team at Raspberry Pi includes three buttons, two main ones for right and left click, and a scroll wheel with button for scrolling. . . and more clicking. . . what more do you need from a mouse!
Mouse Specification:
- Three-button optical mouse
- Scroll wheel
- USB type-A connector
- Compatible with all Raspberry Pi products
- Ergonomic design for comfortable use
- Available in Red/White and Black/Grey
- This mouse will look great with your Red/White official keyboard
What's in the box?:
1 x USB Mouse
Description:
This sleek and stylish keyboard from the team at Raspberry Pi includes three in-built USB 2.0 type-A ports for powering other peripherals (such as the official Raspberry Pi mouse)!
Please Note. This keyboard is available in 6 language formats: UK, US, DE, FR, ES & IT. This model is the US version as used in South Africa.
Keyboard Specification:
- 79-key keyboard (78-key US keyboard)
- 3 USB 2.0 type-A ports for powering other peripherals
- Automatic keyboard language detection
- USB type-A to micro USB type-B cable for connection
- Compatible with all Raspberry Pi products
- Ergonomic design for comfortable use
- Available in Red/White and Black/Grey
What's in the box?
1 x Raspberry Pi Official Keyboard
Description
The OKdo Raspberry Pi 4 8GB Model B Starter Kit is an exclusive 8-piece kit that includes everything you need to start discovering the world of the Raspberry Pi. It includes essential hardware in a single box, access to an online step-by-step guide, and projects to get up and running faster than ever, effortlessly.
Details
Each kit contains the best performing Raspberry Pi 4 Model B board along with a reliable power supply, 2 X micro HDMI cables for dual display, SD Card Reader and a 32GB micro SD card with NOOBS operating system preloaded. As well as 3 x heat sinks and a unique aluminium case with an inbuilt fan for better thermal management. With all of the most current components on the market included in this Raspberry Pi 4 kit, it’s perfect for anyone interested in electronics at any level of experience, even beginners.
What’s in the box?
- Raspberry Pi 4 Model B 8GB board.
- 5.1v Power supply with 4 x interchangeable mains adaptors.
- USB to USB-C cable with in-line switch.
- 2 x Micro HDMI to HDMI cables.
- SanDisk 3D Gen3 X3 256Gb 2-Plane NAND Flash Die for 32GB MicroSD Card. (with NOOBS 3.1.1 preloaded)
- SD card reader.
- 3 x Heat sinks.
- Aluminium Raspberry Pi case with an integrated fan.
The Raspberry Pi
Raspberry Pi’s are compact computer boards roughly the size of a credit card, offering endless opportunities. The Pi was first designed to be a user-friendly alternative to more complicated computer boards but giving the same high specification output, allowing for the customer to do whatever they want with it. Whether you’re planning on introducing programming to children, or an engineer looking to make a complex-controlled system, simply plug into a monitor, keyboard, mouse and power supply and you’re ready to go.
The Raspberry Pi 4 is uniquely designed with high specifications to allow the product to carry out multiple tasks for increased usability:
- Processor: Broadcom BCM2711 Processor Quad-core A72 (ARM v8) 64-bit SoC
- Memory: 8GB LPDDR4 SDRAM
- Bluetooth: Bluetooth 5.0WiFi: 2.4GHz/5.0GHz IEEE 802.11ac
- Ethernet: Gigabit Ethernet
- USB: 2 x USB 2.0 ports, 2 x USB 3.0 ports
- Connection: 40-pin GPIO Header
- HDMI: 2 x micro HDMI ports (up to 4Kp60 supported)
- Video: 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port
- Audio: 4 Pole stereo output and composite video port
- Multimedia: H.265 (4Kp60 decode), H.264 (1080p60 decode, 1080p30 encode. OpenGL ES 3.0 graphics.
- Storage: microSD card slot for loading operating system and data storage
- Input power: 5v DC via USB-C Connector (min 3A), 5v DC via GPIO header. POE enabled (PoE HAT required)
- Operating Temperature: 0 to 50°C
Aluminium Case
This slick protective case made from aluminium includes 3 heat sinks and an integrated fan to ensure the Pi 4 stays cool and runs at maximum efficiency. Cut-outs are made on the case for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the MicroSD card.
Memory?
You won’t be able to forget about this kit… With 4GB LPDDR4 SDRAM built on-board and a 32GB MicroSD card also included, this kit ensures speed and versatility. The 32GB card included meets the SD 5.1 Standard and has an R/W performance: up to 100/25MB/s.
FAQ’s
What’s the difference between to the Raspberry Pi 3b+ and the Raspberry Pi 4 Model B?
Raspberry pi 4 is the newest model of the raspberry pi series. Raspberry Pi 4 takes Pi to another level, with a performance that’s good enough to use in a pinch as a desktop PC, plus the ability to output 4K video at 60 Hz or power dual monitors. New features include:
- A faster processor and GPU,
- More and faster RAM,
- The addition of USB 3 ports,
- Dual Micro HDMI ports instead of a single HDMI connection and support for 4K output,
- A higher bus speed that enables USB 3 support also allows the on-board Ethernet port to support true Gigabit connections (125 MB/s)
Where can I learn how to set up my Raspberry Pi Kit?
Visit our getting starter guide here, to get up and running. Then head to our projects hub for innovative ideas on what to do with your Raspberry Pi kit.
This Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing/Making/Prototyping etc ASAP.
What's in the box:
- Raspberry Pi Zero 2 W
- 32GB preloaded micro SD card with Raspberry Pi OS
- Official Raspberry Pi Zero Red & White Case
- Official Raspberry Pi micro USB power supply White 5.1V 2.5A
- Official OTG micro USB adapter White
- Official Raspberry Pi US Keyboard (Red/White)
- Official Raspberry Pi Mouse (Red/White)
- Official Raspberry Pi mini HDMI to HDMI white cable
Resources:
Getting Started with Raspberry Pi
More on Raspberry Pi OS
Raspberry Pi RP2040 is the first microcontroller designed in-house at Raspberry Pi (“Raspberry Silicon”).
It features:
• Dual-core Arm Cortex-M0 @ 133MHz
• 264KB of on-chip RAM
• Support for up to 16MB of off-chip Flash memory via a QSPI bus
• DMA controller
• Interpolator and integer divider peripherals
• 30 GPIO pins, 4 of which can be used as analogue inputs
• 2 × UARTs, 2 × SPI controllers, and 2 × I2C controllers
• 16 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 8 × Raspberry Pi Programmable I/O (PIO) state machines
• USB mass-storage boot mode with UF2 support, for drag-and-drop programming
Please see the RP2040 datasheet for more details
and Hardware Design with RP2040
To date, RP2040 has only been available on Raspberry Pi Pico, and as a component to a limited number of partners. We now cover the availability of RP2040 as a component to the broad market in single-unit quantities. Bulk quantities on reels of 500 and more available soon.

Description:
This is an integrated bracket case independently designed by Yahboom, which supports Raspberry Pi 4B/3B /3B. It is composed of two upper and lower acrylic plates. The upper acrylic cover comes with mounting holes for fixing the official Raspberry Pi HQ camera. The lower acrylic cover has reserved holes for a cooling fan, display, and 40Pin pin headers, allowing any external devices to be connected to the Raspberry Pi board. We will also provide a detailed installation video, and users can install it easily through the screw copper pillar.
If you're using this tripod stand with a camera, its versatility also allows you to get shots from various angles. The stand comes with adjustable socket joints and flexible feet. You can bend the feet at your will for perfect photos!
This octopus tripod stand is compatible with the Raspberry Pi HQ camera module.(Cam included)
Features:
- A unique all-in-one bracket shell.
- Supports the Raspberry Pi official HQ cameras.(INCLUDED)
- Compatible with Raspberry boards:(BOARD NOT INCLUDED)
- Raspberry Pi 4 Model B 2GB
- Raspberry Pi 4 Model B 4GB
- Raspberry Pi 4 Model B 8GB
- Raspberry Pi 3 Model B
- Raspberry Pi 3 Model B
- Suitable holes for cooling fans, cameras, display screens, and 40Pin pin headers.

What's in the box?
1 x Acrylic top and bottom plate
1 x 5V fan
1 x Plastic rivet set to mount fan
1 x Spacer and screw set
1 x flexible portable camera tripod black
1 x Raspberry Pi HQ cam with ribbon
What You will need:
- Raspberry Pi 4 (preferred) with power supply and cables or a Raspberry Pi kit
- uSD card
- Lens of your choice(Find lenses here)
The Raspberry Pi PoE HAT is an add-on board for Raspberry Pi computers with PoE pins, including Raspberry Pi 3B and Raspberry Pi 4. It is used to power Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.
Specifications:
Standard: IEEE 802.3at-2003 PoE
Input voltage: 37–57 V DC, Class 4 device
Output power: 5 V DC/4 A
Cooling: 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling
Features:
- Fully isolated switched-mode power supply
- Fan control
Operating temperature: 0 °C to 50 °C
Production lifetime: The Raspberry Pi PoE HAT will remain in production until at least January 2027
Compliance: For a full list of local and regional product approvals, please visit www.raspberrypi.org/compliance
Physical specifications

What's in the box?:
1 x Power over Ethernet Plus (POE ) HAT
WARNINGS
• This product shall only be connected to a Raspberry Pi via the four PoE pins.
• Any external power-sourcing equipment/power injector used to enable an Ethernet network shall comply with relevant regulations and standards applicable in the country of intended use.
• This product should be operated in a well ventilated environment, and if used inside a case, the case should not be covered.
• The connection of incompatible devices to the GPIO connection of a Raspberry Pi computer may affect compliance and result in damage to the unit and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of
use and be marked accordingly to ensure that safety and performance requirements are met.
These articles include but are not limited to keyboards, monitors and mice when used in conjunction with Raspberry Pi computers.
• Where peripherals are connected that do not include the cable or connector, the cable or connector must offer adequate insulation and operation in order that the relevant performance and safety requirements are met.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product, please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source. Raspberry Pi computers and the Raspberry Pi PoE HAT are designed for reliable operation at normal ambient room temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board
and connectors.
• Avoid handling the printed circuit board whilst it is powered, and handle it only by the edges to minimise the risk of electrostatic discharge damage.
It features:
• Dual-core Arm Cortex-M0 @ 133MHz
• 264KB of on-chip RAM
• Support for up to 16MB of off-chip Flash memory via a QSPI bus
• DMA controller
• Interpolator and integer divider peripherals
• 30 GPIO pins, 4 of which can be used as analogue inputs
• 2 × UARTs, 2 × SPI controllers, and 2 × I2C controllers
• 16 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 8 × Raspberry Pi Programmable I/O (PIO) state machines
• USB mass-storage boot mode with UF2 support, for drag-and-drop programming
Please see the RP2040 datasheet for more details
and Hardware Design with RP2040
To date, RP2040 has only been available on Raspberry Pi Pico, and as a component to a limited number of partners. We now cover the availability of RP2040 as a component to the broad market in single-unit quantities. Bulk quantities on reels of 500.

Description:
You will find a South African plug adapter here
The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.
If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/black-usb-type-c-female-to-micro-usb-male-adapter
Specifications
Output
- Output voltage: 5.1V DC
- Minimum load current: 0A
- Nominal load current: 3.0A
- Maximum power: 15.3W
- Load regulation: ±5%
- Line regulation: ±2%
- Ripple & noise: 120mVp-p
- Rise time: 100ms maximum to regulation limits for DC outputs
- Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
- Protection: Short circuit protection, Overcurrent protection, Over temperature protection
- Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
- Output cable: 1.5m 18AWG
- Output connector: USB Type-C
Input
- Voltage range: 100-240Vac (rated)
- 96-264Vac (operating)
- Frequency: 50/60Hz ±3Hz
- Current: 0.5A maximum
- Power consumption (no load): 0.075W maximum
- Inrush current: No damage shall occur and the input fuse shall not blow
UL94V-1
AC pin material
Brass (NI plated)
WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.
What's in the box:
1 x USB-C 15.3W power supply
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.

Description:
You will find a South African plug adapter here
The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.
If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/usb-type-c-female-to-micro-usb-male-adapter
Specifications
Output
- Output voltage: 5.1V DC
- Minimum load current: 0A
- Nominal load current: 3.0A
- Maximum power: 15.3W
- Load regulation: ±5%
- Line regulation: ±2%
- Ripple & noise: 120mVp-p
- Rise time: 100ms maximum to regulation limits for DC outputs
- Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
- Protection: Short circuit protection, Overcurrent protection, Over temperature protection
- Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
- Output cable: 1.5m 18AWG
- Output connector: USB Type-C
Input
- Voltage range: 100-240Vac (rated)
- 96-264Vac (operating)
- Frequency: 50/60Hz ±3Hz
- Current: 0.5A maximum
- Power consumption (no load): 0.075W maximum
- Inrush current: No damage shall occur and the input fuse shall not blow
UL94V-1
AC pin material
Brass (NI plated)
What's in the box:
1 x USB-C 15.3W power supply
WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
Description:
The Raspberry Pi Build HAT combines the power of Raspberry Pi computing with LEGO® hands-on learning to enable a fun and creative learning experience for students, teachers and makers.
The Build HAT is compatible with the most recent generation of LEGO® Technic™ motors, and with sensors included in the LEGO® Education SPIKE™ Prime portfolio.
The Build HAT is the second Raspberry Pi product, after Raspberry Pi Pico, to be powered by the Raspberry Pi RP2040 microcontroller.

Specifications:
• Controls up to 4 motors and sensors.
• Powers the Raspberry Pi (when used with a suitable external PSU).
• Easy to use from Python on the Raspberry Pi.
What's in the box?
1 x Raspberry Pi Build HAT for LEGO
Build HAT Links
- Raspberry Pi Build HAT Website
- Getting started with the Raspberry Pi Build HAT
- Raspberry Pi Build HAT Projects
- Raspberry Pi Build HAT Documentation and Python Library
- LEGO Device compatibility
- Build HAT Announcement Article
LEGO Links