Search Criteria


Products meeting the search criteria

Sort By:  
A/V Composite Cable - 3.5mm to 3 x RCA - 2m (4Pole-RCA)

Got a TV with no HDMI input, but still want to hack your Raspberry Pi? Don't worry! The Raspberry Pi comes equipped with a neat 4-Way Composite Video/Audio Jack, and we've got just the cable for you!

Plug this cable into your Raspberry Pi's composite 3.5mm Jack, and your Pi will output Video (1-line) and Audio (2-lines) via the three RCA connectors.


Connector Layout

  • Red - Video
  • Yellow -  Right Audio
  • Black - Left Audio
  • Tested for Compatibility with the Raspberry Pi
  • Gold Plated Connectors
  • 3m Long
  • Colour: Black
  • Connector Type A: 4-Way 3.5mm Audio Jack
  • Connector Type B: 3 x RCA Connectors
  • 1 x Composite Cable - 3.5mm to 3 x RCA

Helpful Tips

  • On first startup (when installing an OS via the NOOBs distribution), hold 3 at boot for PAL, or 4 at boot for NTSC. This will force output via composite insted of HDMI .
  • If you have installed an operating system with an HDMI cable, and want to change to composite hold SHIFT 3 at boot for PAL, or SHIFT 4 at boot for NTSC

Notes on RPi4
By default the composite output on the Pi 4 is disabled because it slows the system down. You need to add this to config.txt

What's in the box:

1 x A/V Composite Cable
R49.82  Inc VAT

These electrical connectors are designed for ribbon cables and telecommunications applications. They are also referred to as insulation-piercing contacts (IPCs).

  • 40 Pins Male Standard 0.1" 2.54mm Row spacing
  • Low Profile with mounting ears
  • 0.1" Pin spacing 0.1" Row spacing, Mates with IDC & PCB male Receptacles
  • Insulation Displacement Connector terminates to 0.050" (1.27mm) flat ribbon cable
What's in the box:

R11.90  Inc VAT
USB A male to USB micro B male 1.5m (USB cable micro 1.5m)

    The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.

    • Tested for Compatibility with the Raspberry Pi
    • 26AWG (Up to 2A)
    • 1.5m Long
    • Colour: Black
    • Connector Type A: USB 
    • Connector Type B: Micro USB
    • 1 x USB A male to USB micro B male 1.5m

      The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi
      R44.90  Inc VAT
      Official Sanwa Arcade Button (Green) (sanwa button green)

      If you're into arcade gaming, there's no doubt that you've heard of Sanwa. Used widely in top end arcade arcade machines and manufactured in Japan by Sanwa Denshi Co., Sanwa arcade products are up there at the top of quality chain in arcade gaming. You really can feel the difference in the quality and snappiness of the microswitches!

      The Sanwa OBSF-30 range are 30mm "snap-in" style arcade buttons with built in microswitch and 2.8mm terminals. These buttons feature two plastic clips which are designed to lock into panels with a thickness of up to 4mm. They will also clamp perfectly well into greater thickness materials.


      • Green Colour
      • 30mm Diameter Arcade Button
      • Sanwa High-Quality Microswitch
      • Smooth Clicking Action
      • 2.8mm Terminal Contacts
      • Gold Plated Contacts
      • Official Sanwa Product
      • Manufacturer Part No. OBSF-30
      R74.90  Inc VAT
      Charger Docter - USB Voltage and Current Meter (USB Docter single)

      You can use this device from 3.5-7VDC input voltage (although most USB  devices tend to hover around 4.75 to 5.25) and up to 3A of current. It  flips between voltage and current readouts every 3 seconds or so. It's a  very handy tool for testing USB devices, checking load levels and  debugging battery chargers and boost converters.

      • USB 1.x and 2.x - all data speeds. Does not have USB v3 pins so USB v3 connections will automatically downgrade to v2
      • Working Range: 0~3A, 3.5~7VDC
      • Resolution: 10mV / 10mA
      • Operating Temperature: 0-60ºC
      • Contents:
      • Camera Board 360 Gooseneck Mount V2


      • 21mm x 53mm x 15mm / 0.8" x 2.1" x 0.6"
      • USB Plug: 13mm / 0.5"
      • Weight: 16.2g
      What's in the box?:

      1 x USB Voltage and Current Meter
      R59.90  Inc VAT
      830 Point Solderless Breadboard (830 breadboard)

      830 solderless point that allows electronic components to be interconnected in an almost endless number of ways to produce working circuits. Compatible with resistors, transistors, diodes, LEDS, capacitors and other types of electronic components. Ideal for experimenting with circuit design for the Raspberry Pi using the GPIO port.

      • Model: MB-102
      • Color: White
      • 830 solderless point
      • 1 x 830 Point Solderless Breadboard
      R28.90  Inc VAT
      One Nine Design Pi B , Pi 2 B, Pi3B and Pi3B Case Black (Pi3 One Nine case Black)

      RASPBERRY PI NOT INCLUDED - Redesigned case now has sufficient space for heat sinks

      The One Nine Design Raspberry Pi Case is a three piece, stylish case designed to keep your Raspberry Pi safe but enable easy access to the GPIO. It comes in three pieces:

      1. A moulded base, with airflow holes and 55mm spaced M3 mounting holes
      2. A slot over cover, which fits over the Pi, enclosing it, but leaving all ports like the GPIO free for hacking.
      3. A cover piece, which clips in and protects the Pi from dust and exposure.

      This case also features two slots for holding the Raspberry Pi Camera module!

      • 3 Piece "Easy-Access" Design
      • Embossed Raspberry Pi Logo
      • SD Card Access
      • Clip Shut Case
      • Labelled Ports
      • Top & Side Location Camera Holder
      • Non Slip Feet
      • 55mm M3 Mounting Holes
      • Full Gloss ABS Plastic
      • External Height: 31mm
      • External Width: 64mm
      • External Length: 95mm
      • ROHS Compliant
      • 1 x One Nine Design Case
      R92.90  Inc VAT
      SD Card Cover for Modular Raspberry Pi Case - Black (mod SD cover black)

      The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look and adaptability make it perfect for many applications.
      This Micro-SD card cover is a tamper proof, clip-fit part and can only be removed by taking the top of the case off first. It’s designed to protect the Micro-SD card from accidental knocks and bangs, in addition to securing the card from theft and unwanted removal.
      The cover is compatible with both our Raspberry Pi 2/3 Modular case and the new Raspberry Pi 4 version.
      • Flush, lockable and tamper-proof
      • Secure your Micro-SD Card from probing fingers
      • Protect your Micro-SD Card from accidental knocks & damage

      Package Includes:

      1 x uSD card cover for the Modular case
      R23.90  Inc VAT
      ModMyPi Modular RPi3 Case - USB/HDMI Cover (Black) (mod hdmi cover black)

       The Modular  Raspberry Pi Case is designed to be fully customisable by the user, and  adaptable to suit a range of requirements. The streamlined look, and  adaptability makes it perfect for many applications, including: the  hobbyist maker, digital signage, industrial protection, living-room  & child-friendly media centres, classroom eduction, workshops and  many more! All add-ons are designed to be interchangeable and can be  added and removed when required.

      The USB/HDMI  security cover is a dual-use shroud that can be utilised to protect  access to all the external inputs and outputs. Two covers can be used  simultaneously if only very limited access is required, and “punch-out”  access hatches are available for both the Ethernet and Micro USB power  port if these inputs are required. Security covers are tamperproof and  can only be removed from inside the case. 

      In  addition to protecting the Raspberry Pi ports, the shroud is offset from  the body by 12mm. The enables the secure, internal and protected use of  up to four nano USB dongles with the cover installed.

      • Dual-Use - Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
      • Secure and Tamper-Proof
      • RJ45 & Micro USB Power Breakout Hatches
      • Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
      • 1 x USB/HDMI Cover
      What else do I need?:
      R27.90  Inc VAT
      3-24V Piezo Electronic Tone Buzzer Alarm 95DB Continuous Sound (buzzer 3-24VDC)

       Piezo Electronic Tone Buzzer Alarm 95DB for Continuous Sound. The piezo sounders are like buzzers. The speaker in the buzzer can be optimized for a single sound, no need to reproduce music.

      • Color: Black
      • Buzzer Type: Piezoelectric
      • Sound Pressure Level 85 dB
      • Rate Voltage: 12V DC
      • Operating Voltage: 3 - 24V
      • Max Current Rating 11mA
      • Frequency 3900±500Hz
      • Drive Method: Drive Circuit Built in
      • Mounting Holes
      • 1 x 85DB Piezoelectric Buzzer Alarm
      R21.90  Inc VAT
      Mini Breadboard 170 - White (bread 170 white)

      These white quarter size breadboards are perfect for small  prototyping projects for the Raspberry Pi. With easy clip action on each board rapidly snap extra boards  together! Each board is 3.5cm x 4.5cm and has 170 tie points - just  enough room to build and test a circuit! Tie points are arranged in 34 x  5 pin rows.

      Each board features a self-adhesive backing and a  single board will fit alongside the Raspberry Pi inside most cases - two  boards will fit within the footprint of the Raspberry Pi. There's also  two mounting holes for M2 screws on each board, to anchor them down!

      • Modular clip function - rapidly snap and unsnap boards and circuits as your project grows
      • Self-adhesive backing.
      • M2 Mounting Points (screws not included)
      • 170 tie points arrange in 34 rows of 5 pins.
      • 3.5cm x 4.5cm
      • 9.7mm thick, including sticky foam on the bottom
      • Weight: 38.9g
      • 1x Mini Breadboard
      R12.90  Inc VAT
      Waterproof DS18B20 Digital temperature sensor Resistor (Waterproof DS18B20 temp)

      This is a pre-wired and waterproofed version of the DS18B20 sensor.  Handy for when you need to measure something far away, or in wet  conditions. While the sensor is good up to 125°C the cable is jacketed  in PVC so we suggest keeping it under 100°C. Because they are digital,  you don't get any signal degradation even over long distances! These  1-wire digital temperature sensors are fairly precise (±0.5°C over much  of the range) and can give up to 12 bits of precision from the onboard  digital-to-analog converter. They work great with any microcontroller  using a single digital pin, and you can even connect multiple ones to  the same pin, each one has a unique 64-bit ID burned in at the factory  to differentiate them. Usable with 3.0-5.0V systems.

      The only  downside is they use the Dallas 1-Wire protocol, which is somewhat  complex, and requires a bunch of code to parse out the communication. If  you want something really simple, and you have an analog input pin,  the TMP36 is trivial to get going.

      We toss in a 4.7k resistor, which is required as a pullup from the DATA to VCC line when using the sensor.


      Cable specs:

      • Stainless steel tube 6mm diameter by 30mm long
      • Cable is 36" long / 91cm, 4mm diameter
      • Contains DS18B20 temperature sensor
      • If  your sensor has four wires - Red connects to 3-5V, Black connects to  ground and White is data. The copper wire is soldered to the wire  shielding
      • If your sensor has three wires - Red connects to 3-5V, Blue/Black connects to ground and Yellow/White is data

      DS18B20 Technical specs:

      • Usable temperature range: -55 to 125°C (-67°F to 257°F)
      • 9 to 12 bit selectable resolution
      • Uses 1-Wire interface- requires only one digital pin for communication
      • Unique 64 bit ID burned into chip
      • Multiple sensors can share one pin
      • ±0.5°C Accuracy from -10°C to 85°C
      • Temperature-limit alarm system
      • Query time is less than 750ms
      • Usable with 3.0V to 5.5V power/data
      • 1 x DS18B20 Digital temperature sensor
      • 1 x 4.7k resistor


      R44.90  Inc VAT
      Jumper cables Male to Male Pack of 65 (65 m2m jumpers)


      These male to male breadboard jumper wires provide an easy way for you to build your own circuitry on a breadboard. These cables are flexible with both ends of a prototyping board connector. The jumper wire is ideal for creating circuits between your microcontroller and breadboard.


      Random colours: white, yellow, orange, blue, black and red (as shown in picture)

      • Material: plastic tin plated copper
      • Outer Diameter: 0.643mmNominal Wire Area: 0.3247 sq. mm
      Pack consists of:
      1. 4 x 175mm wires
      2. 4 x 230mm wires
      3. 8 x 125mm wires
      4. 49 x 95mm wires


      • 1 x Pack of 65 x Jumper Wires for MB102 Solderless Breadboard


      R31.90  Inc VAT
      4X4 MATRIX ARRAY MEMBRANE KEYPAD (4x4 keypad matrix)

      This flexible 4x4 matrix keypad is connected to an 8 pin DuPont Female connector. It can be attached to a surface via the adhesive back by removing the white protective paper backing.

      • Contact Resistance: 10Ω-500Ω
      • Insulation Resistance: 100MΩ 100V
      • Key Operating Force: 150-200N
      • Circuit Rating: 35V DC, 100mA, 1W
      • Dielectric Strength: 250V RMS (50-60HZ/Min)
      • Electric Shock Jitter: ï¼ÂÂœ5ms
      • Operating Temperature: -40 deg. C ~ 80 deg. C
      • Storage Temperature: -40 deg. C ~ 80 deg. C
      • Vibration: 20G, max
      • Size: 68mm x 76mm
      • 1 x 4x 4 Matrix Array Membrane Keypad

      R16.90  Inc VAT
      Dedicated 40-Pin Rainbow Female to Female ribbon Cable for Raspberry Pi (20cm) (40 pin ribbon F2F)

      Raspberry pi 40 pin Female to female flat ribbon cable specifically designed to fit directly onto the GPIO Headers pins of the Raspberry Pi.

      • 40 pin
      • Female to female
      • GPIO Header connector
      • 20cm long
      What's in the box:

      1 x Female to Female ribbon Cable
      R59.90  Inc VAT
      Solderless 400 Point Breadboard (breadboard 400)

      400 Point solderless breadboard. Perfect for solderless electronic projects.

      • 400 tie points total: 300 tie-point IC-circuit area plus two 50 tie-point distribution strips providing 4 power rails.
      • White ABS plastic body with black printed legend.
      • Color legend on distribution strips.
      • Size: 3.3 x 2.1 x 0.3in (84 x 54.3 x 8.5mm).
      • Peelable adhesive tape backing provided for attaching to a surface.
      • 1 x 400 Point Breadboard
      R22.90  Inc VAT
      Jumper Cables Female to Female Ribbon of 40 x 300mm (female to female jumpers 30cm)

      Female to Female Jumper Wire Cable Line Multicolored 300mm

      • Multicolored
      • 300mm
      • Female to Female
      • 1 x Ribbon of 40 lines
      R29.90  Inc VAT
      Piezo Transducer - Mini 5V Buzzer (4000Hz) (buzzer pcb 5V)

      If you want to add beeps, tones or alerts to your Raspberry Pi project, you require a Piezo Buzzer! This mini transducer is small but loud, and can be driven with a 1-6V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin to a square wave out from a timer or microcontroller. For the loudest tones, stay around 4 KHz. For extra loudness, you can connect both pins to a microcontroller and swap which pin is high or low ('differential drive') for double the volume.

      This one plops perfectly into a breadboard and has short legs, so can also easily be mounted on a PCB!

      Please Note. This item is externally driven, e.g. requires a microcontroller to produce a tone.


      This Mini Piezo Transducer Features:

      •     Mini 5V Piezo Transducer
      •     PCB & Breadboard Mountable
      •     Low Power Consumption
      •     Sealed Base
      •     Wave Solderable and Washable

       Technical Specification:

      •     Rated Voltage (Vp-p Square Wave) 5Vp-p
      •     Operating Voltage 1 to 20Vp-p
      •     Rated Current at Rated Voltage 1mA
      •     Sound Output at 4000Hz at 10cm, at Rated Voltage ≥80dB
      •     Resonant Frequency 4000 ±500Hz
      •     Operating Temperature -20 to 70°C
      •     Storage Temperature -30 to 80°C
      •     External Diameter: 13.8mm
      •     External Height: 6.8mm
      •     Capacitance: 0.013µF
      •     Capacitance Max: 16.9nF
      •     Weight: 1g
      •     Model No.: ABT-402-RC
      • 1 x Mini 5V Buzzer
      • Using a Buzzer with a Raspberry Pi
      R4.90  Inc VAT
      HDMI to VGA Converter - Black (NORMAL hdmi vga converter)


      Pi ZERO USERS PLEASE NOTE: To the best of our knowledge this  type of converter draws too much power from the HDMI port to use on the  Raspberry pi ZERO. It could end up killing the ZERO.

      No issues have been reported on the Pi3 with prolonged use.

      This  is a HDMI to VGA convert which will allow you to convert your digital  HDMI output signal, into an analog signal. Perfect for hooking your Pi  up to a computer screen.


      • HDMI(Type A) to VGA(D-SUB)
      • Color: Black
      • HDMI Support: 1.3


      • 1 x HDMI to VGA Converter
      R119.90  Inc VAT
      10mm Spacer for Modular Raspberry Pi Case - Black (modular spacers black)

      The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look and adaptability make it perfect for many applications.

      These spacers increase the internal height of the case by 10mm per spacer and can be stacked to increase the headroom further e.g. 2 spacers would be 20mm extra. Up to 5 spacers can be used, using longer screws if the case needs to be secured.

      The spacers are compatible with both our Raspberry Pi 2/3 Modular case  and the new Raspberry Pi 4 version.

      10mm Stackable Spacers Features

      - Spacers raise the internal height by 10mm enabling the case to grow with your project
      - Spacers can be stacked, increasing the internal height by up to 50mm

      Screw Size Guide

      Depending on the number of spacers required, the length of the screw required will change.

      Below is a table showing the use of up to 5 spacers with corresponding screw lengths. We currently stock 3 screw lengths which are linked below.

      Screws types compatible with spacers plates are both No.4 (US) and M3 (UK/EU). 

      No. of SpacersScrew Length Required (mm)
      028 (Included with Case)



      R49.90  Inc VAT
      Per Page      61 - 80 of 819