Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Heat Activated Switch (KT heat switch kit)
Product Description

This temperature activated project kit is also available as a light activated project kit. The output of this board can be used to control other electronic circuits, turning them on automatically when it goes hot or cold.

The board has space for an LED with current limit resistor (both available separately) which will light when the output turns on.

The Darlington pair transistor configuration allows an output current of up to half an amp to be controlled. Operating voltage 3V to 10V (lower voltages allow for better adjustment of the switching point).

Features:

  • The Temperature Switch Kit detects the temperature of its surroundings using a thermistor.
  • The kit acts as an automated on/off switch (temperature dependent).

Contents:

  • 1 x 47KΩ Potentiometer.
  • 2 x BC337 NPN Transistors.
  • 1 x Thermistor.
  • 1 x 220Ω Resistor.
  • 1 x Heat Activated Switch PCB

Possible applications include:

  • Babies bath over temperature indicator.
  • Automatic fan.

Dimensions:

  • PCB Length: 53mm.
  • PCB Width: 25.5mm.

Requires:


Resources:


Note:

  • This kit requires soldering.
R53.90  Inc VAT
Relay Board (KT relay kit)
Product Description

This is a versatile relay board kit that can easily be configured via jumpers and trimmer potentiometers to do a range of tasks.

Most sensor and switches can be connected to the input of the board and the trigger level set for the input device. This can be inverted if required, then there is the option to feed this straight to the relay or a timer of up to 25 minutes can be used. Irrespective of the state of the invert jumper whenever the sense LED goes from off to on the timer restarts.#

The board can run off any voltage from 4.5 to 6 volts.

The output cans switch DC or mains.

This datasheet details what the board does and how to use it along with some worked examples. A more detailed set of information including the build instructions & how to configure the kit can also be downloaded.

Click here to download the full teaching notes pdf_icon.gif

WARNING: Using mains electricity can be dangerous and should only be attempted by qualified electricians.

This kit includes:

  • 3 x 100Kohm resistors
  • 3 x 220ohm resistors
  • 1 x 47Kohm resistors
  • 1 x 1Mohmpotentiometer
  • 1 x 10Mohm potentiometer
  • 2 x 1N4001 diodes
  • 2 x 5mm red LEDs
  • 1 x 100uF capacitors, electrolytic
  • 1 x 4.7uF capacitors, electrolytic
  • 1 x 2N7000 n-channel FET
  • 2 x 2 way terminal blocks
  • 1 x 3 way terminal blocks
  • 1 x LM324 operational amplifier IC
  • 1 x 14 pin IC holder
  • 2 x 3 way pinstrip
  • 2 x Jumpers
  • 1 x Relay
  • 1 x Relay board PCB

PCB dimensions: 86.5mm x 49mm.

This kit is supplied as a pack of parts and requires soldering.

R159.90  Inc VAT
Deluxe Rear Bike Light Kit (KT deluxe bike kit)
Product Description

The Kitronik Deluxe Rear Bike Light Kit is easy to build kit and is an excellent way to learn about the very popular 555 timer IC. The kit uses four ultra bright LEDs that can be operated in two modes; constant and flashing.

A key design aim of the kit was that it should conform to all relevant British Standard measures. Both the flash rate and brightness conform to British Standards for vehicle road lighting (2005), making it ideal for use as a rear bike light. Alternatively, it can be used as a night safety product or flashing eyes.

During testing we connected the kit to 3 x AAA batteries and ran it continuously. At 80 hours of continuous use the LEDs were still lit at full brightness. After 107 hours, although still lit, the brightness had dropped below the level at which you would want to use them. So, we estimate that with brand new batteries you could comfortably run the light for 2 hours of daily commuting for at least an entire month with the LEDs still at full brightness.

Features:

  • An easy to build rear bike light project that conforms to British Standards for vehicle road lighting (2005) for both brightness and flash rate.
  • Learn about the very popular 555 timer IC.
  • The kit features 4 x bright LEDs.
  • It has two operating modes; continuous and flashing.
  • Its compact design makes it the ideal choice for designing custom enclosures.

Contains:


Dimensions:

  • PCB Length: 52.6mm.
  • PCB Width: 37.6mm.
  • PCB Thickness: 1.6mm.

Video: https://youtu.be/KPPh7Nwa1ts

Requires:


Resources:

R104.90  Inc VAT
Electro-Fashion Starter Pack, Standard Cell Holder (Fashion Starter Pack)
Product description:

This pack is a great way to get started with E-Textiles.

We have selected a number of products from our Electro-Fashion range, including three of our ultra-slim LEDs and two seperate power boards. There are enough components for you get started immediately to create some eye catching E-Textiles projects, the only limit is your imagination.

Features:

  • Everything you need to complete two projects.
  • Enough Electro-Fashion components to get started immediately with E-Textiles.
  • Full instructions for assembly.
  • Great project ideas and tutorials.

Contents:

  • 2 x Coin Cell Holder.
  • 3 x Sewable LEDs  White.
  • 3 x Flashing LEDs White.
  • 1 x Slide Switch.
  • 1 x Push Switch.
  • 2 x CR2032 Coin Cell Batteries.
  • 1 x 6m Conductive Thread.

Dimensions:

  • Sewable Coin Cell Holder Length: 34mm.
  • Sewable Coin Cell Holder Width: 20mm.
  • Sewable Coin Cell Holder Height: 4.5mm.
  • Ultra Slim Sewable LED Length: 15mm.
  • Ultra Slim Sewable LED Width: 6.5mm.
  • Ultra Slim Sewable LED Height: 2.7mm.
  • Slide Switch Length: 18mm.
  • Slide Switch Width: 8.5mm.
  • Slide Button Switch Height: 4mm.
  • Push Button Switch Length: 18mm.
  • Push Button Switch Width: 8.5mm.
  • Push Button Switch Height: 3mm.
  • CR2032 Battery Height: 3.2mm.
  • CR2032 Battery Diameter: 20mm.

Requires:


Resources:


Caution:

  • The coin cell holders in this pack contain Nickel and should not be used in designs where it will be in prolonged contact with the skin.
R289.90  Inc VAT
Electronics Kids School Science Educational 1st circuit Project (first basic circuit)
Description:

Take this step to enrich children's leisure lives, cultivate hands-on ability, and consolidate knowledge. Assisting teachers and parents in better physics teaching. 
Aid young children and elementary school students to increase their physical knowledge in a hands-on form with a simple series circuits


Specifications:

  • Color: Green Black (As Picture Show)
  • Material: Plastic
  • Battery: 2*AA Battery (Not included)

Package Contents:

1 x Bulb Holder
1 x Battery Holder
1 x Switch
1 x Bulb
1 x Conductive Line
(batteries not included)
R49.90  Inc VAT
Ceramic Cartridge Heater 24V 40W 620 with 1M Wire for 3D Printer DIY Kit (24V heat cartridge)
Description:

Replace your 3D printer hotend Heater cartridge.

Features:

Cartridge heater widely used for 3D printers.
Voltage 24V and power 40W, can provide uniform distribution of heat.
Consisting of a cylindrical stainless steel tube for corrosion prevention.
High quality wire core with fine and quick heat conductivity.
The cable is approx. 1 meter. The stainless steel part is 6mm in diameter and 20mm in length.

Specifications:
Voltage: 24V
Power: 40W
Diameter: 6mm, Length: 20mm (stainless steel part)
Wire Length: Approx. 1m

Note:
The item only includes the cartridge heater.
Heating pipe should be stored in a dry place, not damp.

Packing List:
1 x Cartridge Heater
R139.90  Inc VAT
The PiHut's Ultimate 5MM LED Kit (PiHut 5MM LED Kit)
Description:

The ultimate 5MM LED kit, containing 300 LEDs of various colours/styles in a hardy component box with a secure clasp! Each LED type is packed separately with it's value clearly labelled on the outer pouch.
Can never remember which leg is positive and which is negative? Fear not, we've included a handy "LED map" on the inside of the box.
 
Included Values: 

Clear Lens:
  • 20x 5mm Green LED
  • 20x 5mm White LED
  • 20x 5mm Yellow LED
  • 20x 5mm Red LED
  • 20x 5mm Blue LED
  • 20x 5mm Pink LED
  • 20x 5mm Orange LED
  • 20x 5mm Purple LED
Diffused Lens:
  • 20x 5mm Green LED
  • 20x 5mm White LED
  • 20x 5mm Yellow LED
  • 20x 5mm Red LED
  • 20x 5mm Blue LED
Extras:
  • 20x 5mm RGB LED (slow flash)
  • 20x 5mm RGB LED (fast flash)
R129.90  Inc VAT
The PiHut's Ultimate 3MM LED Kit (PiHut 3MM LED Kit)
Description:

The ultimate 3MM LED kit, containing 300 LEDs of various colours/styles in a hardy component box with a secure clasp! Each LED type is packed separately with it's value clearly labelled on the outer pouch.

 

Can never remember which leg is positive and which is negative? Fear not, we've included a handy "LED map" on the inside of the box.
 
Included Values: 
Clear Lens:
  • 20x 3mm Green LED
  • 20x 3mm White LED
  • 20x 3mm Yellow LED
  • 20x 3mm Red LED
  • 20x 3mm Blue LED
  • 20x 3mm Pink LED
  • 20x 3mm Orange LED
  • 20x 3mm Purple LED
Diffused Lens:
  • 20x 3mm Green LED
  • 20x 3mm White LED
  • 20x 3mm Yellow LED
  • 20x 3mm Red LED
  • 20x 3mm Blue LED
Extras:
  • 20x 3mm RGB LED (slow flash)
  • 20x 3mm RGB LED (fast flash)
R149.90  Inc VAT
CamJam EduKit (CamJam EduKit)
Description:

The CamJam EduKit is your way into the world of building electronic circuits and programming the Raspberry Pi in Python.

 Specifications:

The CamJam EduKit features the following components all neatly packaged in a tin:
• A 400pt breadboard
• 3 LEDs (Red, Yellow and Green)
• A button
• A buzzer
• Resistors and jumper cables

 

The kit is accompanied by a set of downloadable worksheets that will take you through a series of exercises from writing a simple program in the Python programming language to lighting up LEDs, reading button presses and making a buzzer go beep! Whereas other products come pre-assembled, the CamJam EduKit introduces you to the world of breadboarding and building electronic circuits yourself, which we think is much more exciting!

 

All the worksheets are freely available to download from http://camjam.me/edukit

 

The CamJam EduKit is a joint venture between The Pi Hut and the Cambridge Raspberry Jam (CamJam). Profits from the sale of the kit will go to CamJam so that they can continue their educational and community work.
R119.90  Inc VAT
CamJam EduKit 2 - Sensors (CamJam EduKit #2)
Description:

The CamJam EduKit #2 is the latest edition to the EduKit family!

The kit is accompanied by a set of (currently 6) downloadable worksheets (or lesson plans for you educators!) that will take you through a series of exercises and projects, teaching you how to make the most of your kit. Whats best is that there is no soldering required, each high quality component is breadboard friendly!

 

All the worksheets are freely available to download from http://camjam.me/edukit

 

Kit Contents:
  • 1 x Breadboard
  • 1 x Immersible temperature Sensor
  • 1 x PIR Sensor
  • 1 x LDR
  • 1 x Active Buzzer
  • 1 x Red 10mm LED
  • 1 x Blue 10mm LED
  • 1 x 4.7K Resistor
  • 2 x 330 Resistor
  • 10 x M/F Jumper Wires
  • 4 x M/M Jumper Wires
  • 1 x Presentation Tin

 

Here are just 4 cool projects you could use the kit for:
  • Make a burglar alarm for your bedroom.
  • Switch on an LED when it gets dark.
  • Have an alarm go off when it’s freezing outside.
  • Test whether the light really does go off in the fridge when you shut the door.

 

Still not convinced? Check out these awesome articles on the kit!

 

The CamJam EduKit is a joint venture between The Pi Hut and the Cambridge Raspberry Jam (CamJam). Profits from the sale of the kit will go to CamJam so that they can continue their educational and community work.
R179.90  Inc VAT
CamJam EduKit 3 - Robotics (CamJam EduKit 3 Robotics)
Description:

The third in the series is here! The CamJam EduKit #3 is focused on robotics and contains (almost) everything you need to create your very own Raspberry Pi-powered robot.

All you need to do is to add your own chassis, Raspberry Pi (any model) & batteries! Then, follow the worksheets to make your own motorized buggy. Add the included sensors and you will soon be detecting objects in front of your robot and following line courses. Included in the kit are the following components:

  • A custom-designed, pre-soldered motor controller board (with screw terminals)
  • Two DC motors (with wires pre-soldered)
  • Two custom red wheels (which go extra fast… because they’re red!)
  • A ball castor (used as the ‘third wheel’ to your robot)
  • A small breadboard (to create your circuits)
  • Two pieces of strong 3M padded double-sided tape
  • A battery box for 4 AA batteries (batteries not included)
  • An ultrasonic distance sensor (for detecting objects in front of your robot)
  • A line follower sensor (for detecting and following black lines)
  • Resistors and jumper cables with which to complete your circuits
  • A strong cardboard box to keep it all in… or to cut into to make your chassis!

All the worksheets are freely available to download from http://camjam.me/edukit

 

Got a 3D printer? Daniel Bull has very kindly designed an awesome chassis, available from Thingiverse ..



Alex Eames over at Raspi.TV got his hands on a prototype, here's what he did!
https://youtu.be/LJDEV7rGwaM

And here's a fantastic unboxing video from Average Man vs Raspberry Pi!
https://youtu.be/KPYWNXiItwo

And another review! This time from TheRaspberryPiGuy! Thanks Matt!
https://youtu.be/TMjd0UrH2PY



R399.90  Inc VAT
24V 40W MK8 Extruder Hot End Kit 1.75mm 0.4mm Nozzle For Creality 3D Printer (24V red hotend)
Description:

A complete hotend for the Ender-3 printer, an original part manufactured by Creality.

Creality Ender-3 hotend specifications:

  1. The aluminium heating block measures 20 x 20 x 10 mm
  2. Heat sink with dimensions: 20 x 27 x 7 mm
  3. The head has a lead-out:
    • Thermistor
    • Heater tube
    • Teflon tube for filament supply
  4. Hotend suitable for printing with 1.75mm diameter filament
  5. Nozzle:0.4 mm
  6. Applicable models: Ender-3, Ender-3s, Ender-3 Pro, Ender-3 V2


What's in the box

1 x hotend kit
R309.90  Inc VAT
Raspberry Pi 4B Aluminium Heatsink Kit(4) (Pi4 silver heatsink kit(4))
Description:

The Heat Sink Kit for Raspberry Pi 4B is a four-piece aluminium heat sink kit which is used to cool the chip on the Raspberry Pi 4B. For silent passive temperature control of your Raspberry Pi.

Specifications:

Material: Aluminum
Colour: Sliver
Size:
  • 14mm x 14mm x 5mm
  • 14mm x 9mm x 5mm
  • 9mm x 9mm x 5mm(2 units)

Packing list:
1 set Aluminum Heat Sinks
R16.90  Inc VAT
Infrared IR Wireless Remote Control Module DIY Kit HX1838 For Arduino (IR remote control Arduino)
Description:

Latest infrared wireless remote control kit consists of Mini Slim 38KHz IR remote control and infrared receiver modules, Mini Slim infrared remote control with 17 function keys, working distances of up to 8 meters, ideal for a variety of devices. IR receiver module can receive standard 38KHz modulation remote control signal, through programming, you can achieve remote control signal decoding operation, which can produce a variety of remote control robots and interactive projects.
 
Features:

    1 Transmission Distance: 8m above (specific and surroundings, the receiver sensitivity and other factors)
    2 Effective angle: 60 degrees
    3 Sticking Material: 0.125mmPET, the effective life of 20,000 times.
    4. Stable quality, cost-effective
    5 quiescent current 3-5uA, dynamic current 3-5mA.

 

 

#include <IRremote.h>

int RECV_PIN = 11;

IRrecv irrecv(RECV_PIN);

decode_results results;

void setup()
{
  Serial.begin(9600);
  irrecv.enableIRIn(); // Start the receiver
}

void loop() {
  if (irrecv.decode(&results)) {
    Serial.println(results.value, HEX);
    irrecv.resume(); // Receive the next value
  }
}
R29.90  Inc VAT
2x4 PTFE Tube Cutter Kit for 3D Printer (PTFE cutter kit)
Description

In order to  properly seat your Bowden tube, it is key to have a clean, square end. Without this, you risk oozing, or worse, clogging in the hot end. This super-sharp tubing cutter is the perfect tool for obtaining a clean, square cut in your tubing, every time.

Features a stainless steel blade and switch button. The housing is made from tough durable plastic. Can also be used to cut filament. But do not use as a wire cutter or you will dull the blade.

What's in the box?

3 x PC4-01 pneumatic plugs
3 x KJH 04-M6 pneumatic plugs
1m  ID2mm OD4mm blue PTFE tube
1 x flat screwdriver
1 x cutter with a replacement blade
2 x 10 * 25mm yellow springs
R329.90  Inc VAT
Arduino starter kit - UNO compatible (Arduino UNO kit)
Description:

This kit is a great way to start your arduino learning experience and includes the following:


You might also like our handy GET STARTED WITH ARDUINO book.

Need to make your UNO project more mobile? Have a look at our battery solutions:


We do also stock enclosures for the Arduino
R409.61  Inc VAT
Picade DIY kit - 10 inch display including Raspberry Pi 4 1GB (Picade 10 incl Pi41)

Description:

The ultimate desktop retro arcade machine! Picade is a Raspberry Pi-powered mini arcade that you build yourself, with authentic arcade controls, a high resolution 4:3 display that's ideal for retro gaming, and a punchy speaker to hear those 8-bit game soundtracks at their best

Picade is now Raspberry Pi 4 compatible and includes a new USB-C version of Picade X HAT!

The all-new Picade has been completely redesigned, from the inside out! There's new artwork, a new display and display driver board, dedicated power button, an all-new Picade X HAT (now with USB-C), easier wiring, easier access to the interior of the cabinet, beautiful new packaging, a bunch of extra goodies (stickers and an enamel Picade pin), and a gorgeous Picade poster and assembly instructions.

Picade comes in kit form, and it'll take around two to three hours to build. The cabinet is made from powder-coated MDF, giving it a quality look and feel similar to a full-size arcade. All you'll need to add is a Raspberry Pi, USB-C power supply, and micro-SD card.


You can watch a video on  Picade at https://youtu.be/5iUuOH1Ip4A

Cabinet features

  • Black, powder-coated panels
  • Acrylic marquee and console with authentic artwork
  • Push-fit arcade buttons
  • Joystick with black ball top
  • 3" speaker (5W, 4Ω)
  • Easy access with removable back panel
  • Dedicated illuminated power button
  • Grippy rubber feet
  • Dimensions: 350x230x210mm

10-inch display features

  • 1024x768 (4:3 ratio) IPS (wide viewing angle) display
  • Pimoroni-designed and manufactured HDMI display driver board and keypad controls
  • Powered by micro-USB cable (included) from your Pi

Picade X HAT features

  • Easy DuPont connectors for buttons and joystick
  • Push-fit speaker terminals
  • I2S audio DAC with 3W amplifier (mono)
  • Power management, power switch pins, and power button
  • 4-way joystick inputs
  • 6 player buttons
  • 4 utility buttons
  • Metal standoffs to hold your Picade X HAT securely

Extras

  • Picade enamel pin badge
  • Pimoroni Super Sticker Selection
  • Picade poster / assembly instructions

What's new!?

The cabinet is more compact, so it fits more neatly on your desk, but has a higher resolution 8"  or 10" display (1024x768). The display is driven by a new Pimoroni-designed and manufactured driver board, with keypad controls. It's an IPS panel, so it looks great from any viewing angle!

The all-new Picade X HAT is packed full of useful features. We've moved from more fiddly screw terminals to simple DuPont connectors that just push in, and the speaker terminals are the same easy push-fit connectors that we use on pHAT BEAT.

There's dedicated power management on-board Picade X HAT; just plug your micro-USB power supply into the HAT and it'll power your Pi through its pins. The power button connected to the HAT means that once your Pi is safely shutdown, the power will be cut completely to the Pi. A simple press of the power button will boot your Picade up again.

The new buttons in Picade are lower profile, and the new joystick has a single connector rather than the eight spade connectors on our previous Picade joystick.

A gorgeous new neon-look Picade logo on the marquee, and rainbow stripes on the console and screen-surround, evoke classic consoles, as do the assembly instructions and poster.

Building your Picade

We hope the included assembly instructions have everything you need to build your Picade, but we've also filmed a complete build video of Picade that you can watch as you build and learn some handy tips and tricks. Find it at https://youtu.be/gTgu1fUVsmw

The sections are also available separately in a playlist here.

We've also put together an online tutorial that incorporates the assembly instructions, important tips and amendments, and the videos for each section, so do check that out!

Software setup

We recommend the RetroPie operating system for your Picade. You can download it from the RetroPie website and then burn it to a micro-SD card with Etcher.

Connect a USB keyboard to your Pi, and connect to Wi-Fi in the RetroPie menu. Press F4 to exit to the terminal and then type curl https://get.pimoroni.com/picadehat | bash to run the Picade HAT installer.

Reboot your Pi, if it doesn't prompt you to. Press the "Alt" key on your keyboard and then select "Configure input" to configure your Picade's controls. You'll find that the sound and power button should both be working now too!

Notes

If your Picade display doesn't show anything when you first power it up, then it could be because the HDMI display is not being detected by the Raspberry Pi. This can happen because power isn't supplied to the USB ports on the Raspberry Pi for the first few seconds of booting. The solution is to edit the /boot/config.txt file on your RetroPie SD card, and add hdmi_force_hotplug=1 on a new line at the bottom of the file.

If you'd like to design your own artwork for your Picade, then we've made a handy PDF that has the outlines and dimensions of the marquee, screen shim, and console. You can download it from the Picade HAT GitHub repo here.

Where to find ROMs for RetroPie (free and legally) https://howchoo.com/g/otiwyjhlnzb/where-to-find-roms-for-retropie

and here http://cvaddict.com/article.php?articleid=15

What's in the box?

1 x DIY Picade
1 x Raspberry Pi 4 model B 1GB

R5,199.90  Inc VAT
Official Raspberry Pi 400 Desktop kit with Official US keyboard, Official Mouse, Official EU power supply, Official HDMI cable and Raspberry Pi Beginners Guide (Pi400 desktop kit US EU)
Description:


Raspberry Pi 400 is a complete Raspberry Pi 4-based personal computer, fully integrated into a keyboard for ease of setup and use.




What is in this box?

  • The Raspberry Pi 400 with US keyboard
  • The Official Raspberry Pi 3A USB type C Power Supply
  • The Official Raspberry Pi micro USB to USB 1m HDMI cable
  • The Official Raspberry Pi Beginner's Guide
  • The Official Raspberry Pi Red/White USB mouse
  • Sandisk uSD with Raspberry Pi OS pre-installed





Overview


Featuring a quad-core 64-bit processor, wireless networking, dual-display output and 4K video playback, Raspberry Pi 400 is a complete personal computer, built into a compact keyboard.

Raspberry Pi 400 is ideal for surfing the web, creating and editing documents, watching videos, and learning to program using the Raspberry Pi OS desktop environment.

Raspberry Pi 400 is available in a number of different regional variants and as either a computer kit, containing everything you need to get started (except for a TV or monitor), or a computer unit only.

Raspberry Pi 400 for working and learning at home




Specifications

Processor: Broadcom BCM2711 quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz

RAM: 4GB LPDDR4-3200

Connectivity: Dual-band (2.4GHz and 5.0GHz) IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE Gigabit Ethernet
2 × USB 3.0 and 1 × USB 2.0 ports
GPIO Horizontal 40-pin GPIO header

Video & sound: 2 × micro HDMI ports (supports up to 4Kp60)

Multimedia: H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES 3.0 graphics

SD card support: MicroSD card slot for operating system and data storage

Keyboard: 78- or 79-key compact keyboard (depending on
regional variant)

Power: 5V DC via USB type C connector

Operating temperature: 0°C to 50°C

Dimensions: 286 mm × 122 mm × 23 mm (maximum)

Compliance: For a full list of local and regional product approvals, please visit
www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md



WARNINGS
• Any external power supply used with Raspberry Pi 400 shall comply with relevant regulations and
standards applicable in the country of intended use.
• This product should be operated in a well-ventilated environment and should not be covered when
being operated.
• The connection of incompatible devices to Raspberry Pi 400 may affect compliance, result in damage to the unit, and invalidate the warranty.
• There are no user-serviceable parts inside Raspberry Pi 400, and opening the unit is likely to damage the product and will invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use
and be marked accordingly to ensure that safety and performance requirements are met. These
articles include, but are not limited to, mice, monitors and cables when used in conjunction with
Raspberry Pi 400.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
• Prolonged exposure to direct sunlight may cause discoloration.


SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture whilst in operation.
• Do not expose to heat from any source; Raspberry Pi 400 is designed for reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the computer.

Accreditation
R1,899.90  Inc VAT
R1,999.90
Creality 3D Printer CR-X Fully Assembled Extruder Hotend kit (CR-X hotend complete)
 Description:

The dual-color FDM 3D printer with dual extruders into one nozzle structure is much easier to use and maintain than a traditional dual-nozzle 3D printer.

Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.

 Specifications:

  •     Material: Aluminum & Stainless Steel & Brass
  •     Installation type: external thread connection
  •     Scope of application: 3D printer CREALITY CR-X
  •     Nozzle size: 0.4mm
R1,799.90  Inc VAT
Educational My First DIY Generator Kit (My first generator kit)
WARNING: CHOKING HAZARD Small parts. Not for children under 3 years old.

Description:

DIY Hand Cranked Power Generator kit
Material: ABS plastic and metal




Package includes:

1 x my first generator kit
R139.90  Inc VAT
Per Page      61 - 80 of 168