Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
2 Pcs LilyPad Button Connect Sensor Board Module for Arduino Power DIY KIT Momentary Push Button Electronic PCB Board Module (wearable buttons(2))
Description:

We designed this board to give the user a very discrete button without any edges. Button closes when you push it and opens when you release (momentary push button).
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Package:

2 x LilyPad Button Board module for ArduinoWe designed this board to give the user a very discrete button without any edges. Button closes when you push it and opens when you release (momentary push button).
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!
 
Dimensions:

8mm x 16mm
Thin 0.8mm PCB
 
Package Includes:

2 x LilyPad Button Board module for Arduino

Getting started with Lilypad button sensor board
R11.90  Inc VAT
10pcs LilyPad LED Modules (wearable led's(10))
Description:

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.

Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available.

They're even washable (with special care)!

Specifications:

  • Operating voltage: 3-5V
  • Operating current: 40MA
  • Weight: 1g (5 by one weight)
  • Size: 12.7 mm x 5.2mm x 2.2mm


Package Includes:

10 X LilyPad Led Module

Documents:

R24.90  Inc VAT
LilyPad Coin Cell CR2032 Battery Holder (switch wearable CR2032 holder)
Description:

Sure, your flashing, chip-tune playing t-shirt is really cool at the party... but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you've even sewn a LilyPad slide switch in-line. Wouldn't it be nice if there was just a switch on the battery? Well look no further.

This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on the LilyPad slide switch board, so it's not easy to accidentally turn off or on.

Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points (two positive and two negative) for sewing into your project.


Package Includes:

1 x LilyPad Coin Cell Battery Holder CR2032 Battery Mount Module
R13.90  Inc VAT
LilyPad Power Supply Module AAA Battery Step up to 5V Converter (wearable AAA battery holder)
Description

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad circuit. Good up to 200mA. Short circuit protected.

This board has AAA battery clips but can use an input from 1.2V to 5V.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!


Package Includes

1 x LilyPad Power Supply Converter Module AAA Battery Step up to 5V
R59.90  Inc VAT
LilyPad Buzzer module (wearable buzzer)
Description:

 This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.

Please note: This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used. Also, it's come to our attention that washing these buzzers will damage them. Until we've figured out a solution to this, avoid washing any portion of your project that contains one of these buzzers.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available.

  • 20mm outer diameter
  • Thin 0.8mm PCB

Package Includes:

R26.90  Inc VAT
Tri-Colour RGB LilyPad LED Module wearable (wearable RGB module)
Description:

Blink any colour you need!

Use the Tri-Colour LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any colour. Very bright output.

This is a common anode(positive) design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel.

LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Package Includes:

1 x Lilypad common anode RGB module

Getting started with lillypad tri-color LED
R15.90  Inc VAT
LilyPad 328 Main Board ATmega328P ATmega328 16M For Arduino (Lilypad)

Description:

This is the LilyPad main board consisting of an ATmega328 using 5V DC power.
The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! We now use a surface mount programming connector to keep the header from poking through.



This version of the LilyPad now uses the new ATmega328 at 8MHz. 0016 supports the Pro Mini 328/8MHz/16MHZ. Use this setting when using this new LilyPad 328.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing.

Various input, output, power, and sensor boards are available. They're even washable!

 

Package Includes:
1 x 328 Main Board

R69.90  Inc VAT
Per Page      1 - 7 of 7
  • 1