Search
Search Criteria
Products meeting the search criteria
You will need a micro:bit V2
Description:
Downloadable 25 page booklet: https://www.monkmakes.com/downloads/instructions_mb_kit_2.pdf
Build 7 great projects:
- Lighthouse
- Movement Alarm
- Color Mixer
- Anemometer
- Fan Speed Controller
- Clap Controller Fan
- Nightlight
What's in the box?
1 x MonkMakes Relay
1 x MonkMakes RGB LED
1 x Alligator Leads
1 x Motor with Fan
1 x Single AA Battery Box
1 x LED Lamp
More space and higher speed. Free up your devices with the largest capacity and highest read/write speeds in its class. With astonishing performance and reliability, EVO Plus lets you save and treasure the richness of life.
Record and play 4K UHD video without glitches. With superfast read & write speeds up to 100 MB/s & 90 MB/s respectively, the 512GB EVO Plus lets you transfer a 3GB video to your notebook in just 38 seconds.* Shoot flawless high quality photos and videos, and share them all in an instant.
* The foregoing read & write speeds are based on internal tests conducted under controlled conditions. Actual speeds may vary depending upon card capacity.
Compatible with a wide range of devices for both SD and micro SD. You can even capture detailed 4K UHD video. The included SD adapter fits most devices under almost every brand name, while preserving all of EVO Plus’ outstanding speed and performance.
What's in the box?
1 x Samsung micro SD card
More space and higher speed. Free up your devices with the largest capacity and highest read/write speeds in its class. With astonishing performance and reliability, EVO Plus lets you save and treasure the richness of life.
Record and play 4K UHD video without glitches. With superfast read & write speeds up to 130 MB/s & 90 MB/s respectively. Shoot flawless high quality photos and videos, and share them all in an instant.
* The foregoing read & write speeds are based on internal tests conducted under controlled conditions. Actual speeds may vary depending upon card capacity.
Compatible with a wide range of devices for both SD and micro SD. You can even capture detailed 4K UHD video. The included SD adapter fits most devices under almost every brand name, while preserving all of EVO Plus’ outstanding speed and performance.
What's in the box?
1 x Samsung micro SD card
More space and higher speed. Free up your devices with the largest capacity and highest read/write speeds in its class. With astonishing performance and reliability, EVO Plus lets you save and treasure the richness of life.
Record and play 4K UHD video without glitches. With superfast read & write speeds up to 130 MB/s & 90 MB/s respectively. Shoot flawless high quality photos and videos, and share them all in an instant.
* The foregoing read & write speeds are based on internal tests conducted under controlled conditions. Actual speeds may vary depending upon card capacity.
Compatible with a wide range of devices for both SD and micro SD. You can even capture detailed 4K UHD video. The included SD adapter fits most devices under almost every brand name, while preserving all of EVO Plus’ outstanding speed and performance.
What's in the box?
1 x Samsung micro SD card
16GB Sandisk Micro SD card preinstalled with the Raspberry Pi OS. Perfect for both the Raspberry Pi 4 Model B, Raspberry Pi 3 or Raspberry Pi Zero.
- This is the hard drive and operating system for your Raspberry Pi
- Extended partition to make full use of the SD card
- Ready to use – plug it in and you’re ready to go
- Only the most current stable release of the operating system will be used
- High quality MicroSD card
1 x Sandisk 16GB uSD preloaded with Raspberry Pi OS
1 x Jewel case
1 x SD Adapter
Resources:
Latest image and tools are available from the Raspberry Pi Foundation Downloads
This Starter Kit is based around the Raspberry Pi Pico development board which features the Raspberry Pi RP2040 microcontroller chip. 
Whats in the box:
- The Raspberry Pi Pico microcontroller
- USB A male to USB micro B male 1.5m cable
- 2.54mm Pitch Single Row Pin Header 40-PIN - Black
Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts
Description:
This Starter Kit is based around the Raspberry Pi Pico development board which features the Raspberry Pi RP2040 microcontroller chip.
Whats in the box:
- The Raspberry Pi Pico microcontroller
- USB A male to USB micro B male 1.5m cable
- 2.54mm Pitch Single Row Pin Header 40-PIN - Black
- 5.1V 2.5A Official Power Supply white for Pico
Resources:
Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts
Raspberry Pi RP2040 is the first microcontroller designed in-house at Raspberry Pi (“Raspberry Silicon”).
It features:
• Dual-core Arm Cortex-M0 @ 133MHz
• 264KB of on-chip RAM
• Support for up to 16MB of off-chip Flash memory via a QSPI bus
• DMA controller
• Interpolator and integer divider peripherals
• 30 GPIO pins, 4 of which can be used as analogue inputs
• 2 × UARTs, 2 × SPI controllers, and 2 × I2C controllers
• 16 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 8 × Raspberry Pi Programmable I/O (PIO) state machines
• USB mass-storage boot mode with UF2 support, for drag-and-drop programming
Please see the RP2040 datasheet for more details
and Hardware Design with RP2040
To date, RP2040 has only been available on Raspberry Pi Pico, and as a component to a limited number of partners. We now cover the availability of RP2040 as a component to the broad market in single-unit quantities. Bulk quantities on reels of 500 and more available soon.
The USB to Micro USB Cable is 1m long manufactured by Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.
Specifications:- 1m Long
- Colour: Red
- Connector Type A: USB
- Connector Type B: Micro USB
- 1 x USB A male to USB micro B male 1m
Description:
You will find a South African plug adapter here
This PSU supports up to 2.5A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 3 Model B, Zero and Pico
Specifications:
Output
- Output voltage: 5.1V DC
- Minimum load current: 0.0A
- Nominal load current: 2.5A
- Maximum power: 12.5W
- Load regulation: ±5%
- Line regulation: ±2%
- Ripple & noise: 120mVp-p
- Rise time: 100ms maximum to regulation limits for DC outputs
- Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
- Protection: Short circuit protection
Overcurrent protection
- Efficiency: 80.73% minimum (output current from 100%, 75%, 50%, 25%)
- Output cable: 1.5m 18AWG
- Output connector: mirco USB
Input
- Voltage range: 100–240Vac (rated) 96–264Vac (operating)
- Frequency: 50/60Hz ±3Hz
- Current: 0.5A maximum
- Power consumption (no load): 0.075W maximum
- Inrush current: No damage shall occur and the input fuse shall not blow
What's in the box?
1 x Official Power Supply
WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
This adapter kit was created for the Raspberry Pi Zero. It includes all the adapters you need to get your Raspberry pi Zero going.
What's in the box?
1 x pin header 2x20
1 x Official Raspberry Pi male mini HDMI to female HDMI adapter
1 x Official Raspberry Pi OTG male micro USB to female USB A adapter
16GB, 32GB or 64GB Panasonic Class 10 A1 Micro SD card preinstalled with the Raspberry Pi OS. Perfect for the Raspberry Pi 4 Model B, Raspberry Pi 3 or Raspberry Pi Zero.
Features:
- This is the hard drive and operating system for your Raspberry Pi
- Extended partition to make full use of the SD card
- Ready to use – plug it in and you’re ready to go
- Only the most current stable release of the operating system will be used
- High quality MicroSD card
1 x 32GB uSD card
Resources:
Latest image and tools available from the Raspberry Pi Foundation Downloads
Description
Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi and manufactured for the Raspberry Pi 4 Model B and RPi400.
Perfect for running a dual screen setup.
Specifications- 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
- 2m black cable
- Nickel-plated plugs
- 4Kp60 compliant
- RoHS compliant
- 3Mohm 300VDC insulation, withstands 300VDC for 0.1s
What's in the box?
1 x 2m black micro HDMI cable
The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.
Specifications:- Tested for Compatibility with the Raspberry Pi
- 26AWG (Up to 2A)
- 1.5m Long
- Colour: Black
- Connector Type A: USB
- Connector Type B: Micro USB
- 1 x USB A male to USB micro B male 1.5m
Need a high quality SD & Micro SD card reader/writer that can handle SD card sizes up to 512GB? We've found one! The Kawau C296 2 in 1 USB card reader features two slots, one for a standard size SD card, and one for Micro SD cards. It uses USB 2.0, with transfer speeds up to 480Mbps, and it's plug and play! A lot of cheaper SD card readers will not read cards above 32GB (or even 16GB on some of the really cheap ones), but never fear! You can now future proof your SD card library, safe in the knowledge that your Kawau SD card reader can take cards up to 512GB's!
Supports SD, SDHC, SDXC, MMC, Exteme SD, Mini SD, Micro SD, Micro SDXC, Micro SDHC Memory Cards, in addition to the latest format UHS cards.
Technical Details
- Brand: Kawau
- Model: C296
- Compatible Cards:
- SD
- SDHC
- SDXC
- MMC
- Extreme SD
- Mini SD
- Micro SD
- Micro SDXC
- Micro SDHC
- UHS
- Supports Card Sizes:
- 4GB
- 8GB
- 16GB
- 32GB
- 64GB
- 128GB
- 256GB
- 512GB
- Colour: Black
- Blue Transfer Light
- Supports up to 512GB
- Size: 60 x 17 x 8.5 mm
- Weight: 16.05 g
1 x USB SD & Micro SD Card Reader
Tactile Switches or tact switches are an on/off electronic switch that is only on when there is some pressure put on it or when the button is pressed. As soon as the tactile switch button is released and the pressure has been took off, the circuit is then broken.
Specifications:- Size: (Approx.)6x6x3.3mm
- Life: 100000 times
- Quantity: 50pcs
- Current: 50mA
- Voltage: 12V
What's in the box?:
5 x Tactile Switches
Resources:
Python library
Introduction to Buttons and Switches
Types of buttons and switches
Description:
This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access, or mounting your Raspberry Pi safely within an enclosure!
Micro SD to SD Extension Cable Features:
- Micro SD Card Male to Full Size SD Card Female
- SD Card Plastic Housing Case: 51mm x 35mm x 11mm
- Flex Cable ~ 45cm
- Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
- Supports SD/SDHC/SDXC Cards
- Push/Push SD Card Slot
What's in the box:
1 x Micro SD to SD Extension Cable
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port so you can plug in your mouse, keyboard or any other required peripherals! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client (slave) device! This one's in white!
Features:
- Micro USB B (Male) to USB A (Female)
- OTG On-The-Go Host Cable
- CE and ROHS Compliant
- For the Raspberry Pi Zero
This micro SD card to micro SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access, or mounting your Raspberry Pi safely within an enclosure!
Micro SD to SD Extension Cable Features:
- Micro SD Card Male to Micro SD Card Female
- Flex Cable ~ 45cm
- Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
- Supports SD/SDHC/SDXC Cards
What's in the box?:
1 x Micro SD Extension Cable
This 16GB MicroSD Card is preloaded with the Official Raspberry Pi OS. For beginners and first-time users, this is the easiest way to get started with Raspberry Pi Boards (this will work for all RPi models). There are a range of popular operating systems for you to try, however the Official Raspberry Pi OS is the majorly supported system to choose.
Please Note. This Micro SD Card does NOT come with a SD Card Adapter, it is the Micro SD Card ONLY
The SanDisk 16GB Preloaded Micro SD Card Features:
- Superior Random-Access Performance - Perfect for the Raspberry Pi
- Safe from X-rays and magnetic fields
- Reliable shock-proof technology
- Water and dust proof, thanks to EMC coating
- Tested and proven to last up to 24 hours in sea water
- Capacity : 16GB
- Weight : Approx 0.2g
- Operating Voltage : 2.7 ~ 3.6V
- Data Transfer Speed: Up to 48MB/s read
- Speed Class Class 10
- preloaded with Raspberry Pi OS
What's in the box?:
1 x SanDisk microSDHC
Resources:
Latest image available from the Raspberry Pi Foundation Downloads