Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
SG90 Universal 9g Servo Motors w/ Accessories for R/C Robot / Helicopter - Blue + Yellow (sg90 servo blue)

Specifications

  • Product: SG90 Servo
  • Torque: 2.0kg/cm(4.8V), 2.2kg/cm(6V)
  • Speed: 0.09s/60°(4.8V), 0.08s/60°(6V)
  • Rotate angle: 180°
  • Operating voltage: 4.8 ~ 6V
  • Gear: plastic
  • Dead band: 7us
  • Weight: 10.5g
  • Dimension: 22.8mm × 12.2mm × 28.5mm


ExplainingComputers has a great video on using this servo https://www.youtube.com/watch?v=xHDT4CwjUQE&t=389s

How to set up SG90 Servo Motor on Raspberry Pi

R34.90  Inc VAT
3V-7V DIY Light Shock Absorbed Tank Robot Chassis With 130 Motors (tank chassis shocks)
Features:

1. Only 166g in weight
2. Good damping effect, you can press down to 0.7cm
3. With general motors 130, support 3-7V voltage
4. With the DC charging port at the bottom of the tail


Specifications:

Size: wide 9.7cm* long 18.5cm* high 5cm
Voltage: 3-7V
Motors: 130
Weight: 166g

 

Package Included:

1x Tank Robot Chassis

Read the Docs
R419.90  Inc VAT
12 Types Micro DC Motors with Gear Kit (12 Motors kit)
Features:

There is one set of 12 DC motors in this kit

Motor typeSizeVoltageNo load current3V SpeedSupporting gear
5*7 motor 19*7*5mm3V30ma19000rpm/min1008kxb
K10 motor10*8*7mm3V30ma15500rpm/min1008x
11mm long axis N2015.5*12*10mm 3V300ma31000rpm/min1008x
N30 Model aircraft motor26*12*10mm3.7V220ma20900rpm/min1008x
RF-130CH22.8*17.1mm6V300ma30000rpm/min1008h
020 motor19*18*9.5mm3V70ma11800rpm/min1008h
130motor 25*20*15mm 3V350ma16500rpm/min1012a
long axis 140 motor25*21mm3V230ma16500rpm/min 1012a
SRF300 motor24.5*13mm3V20ma4000rpm/min1012a
310 motor 18*24mm3V20ma4000rpm/min1012a
Square hole 180 motor34*20*15mm 6V450ma18000rpm/min1012a
M20 (green bottom cover) 10*8*15mm3.7V 120ma22000rpm/min1008x

Package includes:

12 x DC motors

Getting started with Raspberry Pi gpiozero Motors
R299.90  Inc VAT
Stepper Motor HAT for Raspberry Pi Drives Two Stepper Motors (WS stepper RPi board)

Overview

This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping.

Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Adjustable motor drive current via potentiometer, maximum 2.5A current output
  • Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO)
  • Integrates 5V regulator, allows providing power to Raspberry Pi
  • Onboard multi connector options for stepper motors in different specifications
  • Comes with development resources and manual (examples in BCM2835, wiringPi, and python)

Specifications

  • Motor controller: DRV8825
  • Motor drive voltage: 8.2V~28V
  • Motor drive current: 2.5A
  • Logic voltage: 3.3V
  • Dimension: 65mm × 56mm
  • Mounting hole size: 3.0mm

Applications

  • 3D Printer
  • Sculpturing machine
  • Mechanical arm

Demo

Note: this 9V/2A Power Supply is recommended for driving SM24240, SM25776, 5V Step Motor

Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/Stepper_Motor_HAT

R279.90  Inc VAT
Kitronik Robotics Board for Raspberry Pi Pico (KT Robotics Board Pico)
Description:

Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico.

The Robotics Board features 2 Dual H Bridge Motor Driver ICs. These are capable of driving 2 standard motors or 1 stepper motor each, with full forward, reverse, and stop control. There are also 8 servo outputs, capable of driving standard and continuous rotation servos. They can all be controlled by the Pico using the I2C protocol, via a 16 channel driver IC. The IO break out provides connections to all the unused pins on the Pico. The 27 available I/O pins allow other devices, such as sensors or ZIP LEDs, to be added to the board.

Power is provided via either a terminal block or servo style connector. The supply is then controlled by an on/off power switch to the board and there is also a green LED to indicate when the board has power. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected Pico. This removes the need to power the Pico separately. The 3V and GND pins are also broken out on the header, which means external devices can also be powered.

To use the robotics board, the Pico should be firmly inserted into the dual row pin socket on the board. Ensure the Pico is inserted with the USB connector at the same end as the power connectors on the robotics board. This will allow access to all of the board functions and each pin broken out.


Features :

  • A compact yet feature-packed board designed to sit at the heart of your Raspberry Pi Pico robotics projects.
  • The board can drive 4 motors (or 2 stepper motors), with full forward, reverse, and stop control, and 8 servos.
  • It also features 27 other I/O expansion points and Power and Ground connections.
  • The I2C communication lines are also broken out allowing other I2C compatible devices to be controlled.
  • Additionally, the board features an on/off switch and power status LED.
  • Power the board via either a terminal block or servo style connector.
  • The 3V and GND pins are broken out to solder pads, allowing external devices to be powered.
  • Code it with MicroPython via an editor such as the Thonny editor.

Specifications :

Supply Voltage3 - 10.8V
Number of Servo Channels8
Number of Motor Channels4 DC / 2 Stepper
Servo / Motor VoltageSame as Supply Voltage
Max Continuous Current (all Servos an Motors)12 Amps
Max Motor current1.5A / Motor
Additional IO26 (via solder pads)
Additional GND8 (via solder pads)
Addional 3V37 (via solder pads)


What's in the box ?


1 x Kitronik Robotics Board (for Raspberry Pi Pico)









 (* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)


(* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)




(* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)

R289.90  Inc VAT
Per Page      1 - 5 of 5
  • 1