Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Need to create your own length jumpers?
R239.90  Inc VAT
This heatsink fits snugly under a HAT.
R7.90  Inc VAT
500W Spindle motor with chuck, power supply and speed controller for CNC.
R2,399.90  Inc VAT
Protect your Pi Zero W in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!
R85.64  Inc VAT
R109.90
R419.90  Inc VAT
Convert your Pi Zero or Pi Zero W into a convenient USB dongle.
R129.90  Inc VAT
R34.90  Inc VAT
M3 Delta Adjustable Pulley 3D Printer Injection Molded Piece (M3 delta belt coupler)
Description:

Belt tensioners are an effective way to adjust a belt's tension without having to manually reposition the idler pulley on an axis. The right 3D printer belt tension is crucial for quality prints.

Features:

Bore distance: 20mm x 20mm
For: M3 (Both sides of the screw)
Suitable belt: GT2 / MXL 6mm (note: belt not included)
Material: High strength nylon

Package includes:

1 x M3 Delta Adjustable Pulley


M3 Delta Adjustable Pulley 3D Printer Injection Molded Piece
R99.90  Inc VAT
Geekcreit® 610Pcs Wire Jumper Pin Header Kit (Jumper header kit)
Description:

Normally a male connector having exposed pins which are molded into a plastic base. Common Headers are 0.1 inch spacing, pin-to-pin. Female connectors having the same spacing are used to interface.

Commonly used in electronics projects involving a controller and a breadboard to create short term wiring between components. With this kit you can make your own lengths and make up multiple pins connections.

Features:

Great for electronics prototyping.
Compatible with Arduino and Raspberry Pi projects.
Box size(L*W*H): 17 x 10 x 2.2 cm

Package includes:

1 x Plastic Box (Contains 610 PCS Connector Kit)

Note:

Artificial pick, please allow an error of 2%, thank you.
Need to create your own length jumpers?
R239.90  Inc VAT
Raspberry Pi CPU Heatsink 7mm (CPU heatsink black 7mm)

Description:

If your project is particularly resource-hungry then the Raspberry Pi may run a little hot. Cool it down with this nifty little heatsink!

Simply remove the backing from the pre-applied thermal tape and stick it on top of the main processor chip.

Specifications:

  • 14mm x 14mm (in 7mm height)
  • Ideal for use with Raspberry Pi 3/4/zero
  • Matte black finish
  • Made from anodised aluminium
  • Comes with pre-applied thermal tape for easy installation
  • Anodised non-conductive coating
What's in the box:

1 x CPU Heatsink 7mm

Note: At 7mm tall this heatsink may interfere with some HAT boards.

This heatsink fits snugly under a HAT.
R7.90  Inc VAT
Machifit ER11 Chuck CNC 500W Spindle Motor with 52mm Clamp and Power Supply Speed Governor (500w spindle motor kit)
It only can be used with AC220V±10% 50/60Hz, not110V.

Here are the links of  the CE Certification and the Environmental Certification:

CE Certification: 

https://www.dropbox.com/s/x937yu696g449o2/CE Certification .pdf?dl=0

Environmental Certification: 
https://www.dropbox.com/s/38ncgzktlsxlhvw/Environmental Certification .pdf?dl=0

Description:

If your project is not aiming to be the most heavy duty CNC machine out there, but is meant to be easy and inexpensive to build so that anyone can get a hand on a precise CNC, machining in many materials including metal. Then this is the perfect starting point for you.

Specifications:


Brand: Machifit
Dimensions140mm×110mm×48mm (L*W*H)
InputAC220V±10% 50/60Hz
Spindle Motor500w
Spindle Speed3000-12000r/min
Motor Diameter52mm
Motor Length208mm
Operating Voltage100V DC
Current6A
SpeedUp to idle up to 15,000 rev / min
Torque5000G/CM
Insulation Resistance> 2 megohms
Dielectric Strength400V
High precision spindle runout 0.01-0.03

Chuck size:
Style: ER11
Material: High Grade 45 Carbon Steel
Total height: 18mm
Outer diameter(Max.): 11.5mm
Gripping Range: 3mm
Small diameter: 7.8mm
Fits metric shank size(s): 3mm metric shank

Nut Size: 
Inner Diameter: 8.7mm
Height: 13mm
Hex Diameter: 17mm
Outer Diameter:19mm

The Usage of "Don't pipe":
Its function is to inhibit the switched source. If they are open, the source does not give tension. 
If the short circuits, for example with a relay, the source generates the voltage to which it is regulated with the potentiometer.
There will be no problem in controlling the motor using these pins.
 
Package Includes:
1 x 500W Spindle Motor
1 x Power Supply
1 x 52MM Mount Bracket
1 X ER11 Collect
4 x Screws



500W Spindle motor with chuck, power supply and speed controller for CNC.
R2,399.90  Inc VAT
Raspberry Pi logo large sticker set of 6 (6 x Stickers Large)

Description:

58mm long by 44mm wide - adds a splash of colour to laptops, camera cases, fridge doors or anywhere else you can think to put it.

Not only are you helping the Foundations educational aims by buying these, you're also brightening up the world for everyone else :-)

Features:

Deminsions - 58 x 44 mm


What's in the box?:

6 x Raspberry Pi Sticker

R54.90  Inc VAT
SanDisk microSDHC 16GB C10 preloaded with Raspberry Pi OS (San 16GB RPi OS uSD)
Description:

This 16GB MicroSD Card is preloaded with the Official Raspberry Pi OS. For beginners and first-time users, this is the easiest way to get started with Raspberry Pi Boards (this will work for all RPi models). There are a range of popular operating systems for you to try, however the Official Raspberry Pi OS is the majorly supported system to choose.

Please Note. This Micro SD Card does NOT come with a SD Card Adapter, it is the Micro SD Card ONLY

The SanDisk 16GB Preloaded Micro SD Card Features:

  • Superior Random-Access Performance - Perfect for the Raspberry Pi
  • Safe from X-rays and magnetic fields
  • Reliable shock-proof technology
  • Water and dust proof, thanks to EMC coating 
  • Tested and proven to last up to 24 hours in sea water
  • Capacity : 16GB
  • Weight : Approx 0.2g
  • Operating Voltage : 2.7 ~ 3.6V 
  • Data Transfer Speed: Up to 48MB/s read
  • Speed Class Class 10
  • preloaded with Raspberry Pi OS

What's in the box?:


1 x SanDisk microSDHC 


Resources:

Latest image available from the Raspberry Pi Foundation Downloads


R139.90  Inc VAT
3 pin Fuse Power Supply Socket fuse (3in1fuse power socket)
Description:

They are easy to incorporate into your electronic enclosures, and they provide both a switch and fuse for whatever load. 
3 In 1: AC 3P male power plug with an integral switch and fuse holder, Use Only with 250V Fuse. (Fuse is Not Included). 
Widely used for your CNC controller box,PC case, instrument, tableware, counter, daily use,etc. 

Specifications:

  • Voltage: 10A AC250V
  • Contact Resistance: ≤0.03Ω
  • Withstand voltage: AC 1500V(50hz)/min
  • Insulation Resistance: ≥100MΩ
  • Insertion and Extrartion Force: 3-20N
  • Dielectric intensity: ≥2000V AC/min
  • Temperature: -40℃ to 70℃
  • Color: Black

Package includes:
1x power supply socket
R84.90  Inc VAT
Mini Round Red 2 Pin SPST ON-OFF Rocker Switch (round red rocker switch)
Description:

Rocker Switches house a button for operation that can be pressed on either end like a seesaw to connect or disconnect an electrical circuit. They are often used as ON/OFF switches on the main power supplies for electronic devices.

Features:

  • Rating: 3A 250V
  • Mounting hole: 20mm
  • Poles: SPST
  • Terminal: 2-Pin(ON-OFF)
  • Contact resistance: ≤30mΩ
  • Insulation resistance: ≥100MΩ at 500V DC
  • Dielectric strength: 1500V AC for 1 minute
  • Operating temperature: -25°C - 85°C
  • Electrical life: 10000 cycles
  • Color: black / red


Package included:

1 x Mini round red rocker switch


Resources:

Introduction to Buttons and Switches
Types of buttons and switches

R26.90  Inc VAT
T Style 40-Pin GPiO Breakout Board for Raspberry Pi (T Board blue)
Description:

Pic is for illustration purposes only.

Colours might differ between blue and red as per manufacturer stock availability.

This T shaped breakout board makes it easier to use the GPIO pins as it is bigger in size and labeled.

The board also tightly fits on to a breadboard making electronic experiments much easier.

Specifications:
  • 40 Pins means it's ready for use on the Pi3B,Pi2B and B
What's in the box?:
  • 1 x T Style 40-Pin GPiO Breakout Board
Resources:
R55.74  Inc VAT
R74.90
Prototyping Expansion Board For Raspberry Pi 2/3 Model B and B+ Kit (AW Pi prototyping kit)
Features:

The hole gap is 2.54mm, and it's compatible with IC with DIP package.
The IO port can be quickly and easily implement your ideas.

Note:

- Extra header spacer included
- 170 tie points breadboard arranged in 34 rows of 5 pins included




Package includes:

1 x Prototyping Shield kit
R166.45  Inc VAT
Analog Ceramic Piezo Vibration Sensor (ceramic vibration sensor)
Description:

This vibration sensor is based on piezoelectric ceramic chip analog vibration. It makes use of the anti-conversion process that piezoelectric ceramic vibration will generate the electric signals.
When vibrating the piezoelectric ceramic chip, the sensor’s signal terminal will generate electrical signals. 

Specifications:


Working Voltage: 3.3V or 5V
Working Current: <1mA
Operating Temperature Range: -10 ~ 70
Interface Type: Analog Output
Item Size: 30mm x 23mm
GPIO: S; signal output, ; power supply (VCC), -; ground (GND)
Input: Positive electrode of the piezoelectric ceramic
GND: Negative electrode of the piezoelectric ceramic


Package includes:

1 x Ceramic Piezo Vibration Sensor
R49.90  Inc VAT
Pibow Zero W (Pibow zero W)
Description:

Protect your Pi Zero W in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!

Note that this is the case for the Raspberry Pi Zero W only. This case is not compatible with the Pi Zero v1.2/1.3. Does not include a Raspberry Pi Zero W!

Features

  • Compatible with Raspberry Pi Zero W
  • Super-slimline profile
  • Fully HAT/pHAT compatible
  • Protects your beloved Pi Zero W!
  • Clear top and base leave Raspberry Pi Zero W visible
  • GPIO cut-out
  • Leaves ports and GPIO accessible (encloses micro SD and blocks RUN/TV header)
  • Made from lightweight high-quality cast acrylic
  • Great for hacking and tinkering!
  • Made in Sheffield, UK

Crafted out of four unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Zero W while leaving the primary ports and GPIO accessible.

This case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly (check out the exploded diagram on this page for tips on assembly, or our tutorial).

Protect your Pi Zero W in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!
R85.64  Inc VAT
R109.90
SPST 2Pin Heavy Duty 15A 250V ON/OFF Rocker Toggle Switch Waterproof Boot (waterproof boot toggle switch)
Description:

Uses a certain action force to connect the contacts through a certain travel to make circuit conversion. With the characteristics of instantaneous action and small travel between small contacts. 

Widely used in various electronic products, instruments and apparatus, and home appliances etc. fields.

Specifications:

  • Waterproof Boot
  • Model: E-TEN1021
  • Sizes:29 x 16 x 56mm
  • Style: On-Off
  • Power: 15A 250VAC
  • Connector Type: SPST
  • Material(External): Metal
  • Dielectric strength: 1000 V RMS (min)
  • Insulation resistance: 100 Mω(min)
  • Basal material: Poly propylene materials
  • Mechanical life: More than 50.000 cycles
  • Electrical life: More than 10,000 cycles
  • Environment temperature: - 25 degrees ~ 80 degrees
  • Vibration: 10 to 55Hz, 1.5 mm double amplitude
 
Package Includes:

1 X SPST 2Pin Heavy Duty15A 250V ON/OFF Rocker Toggle Switch Waterproof Boot


Resources:

Introduction to Buttons and Switches
Types of buttons and switches

R49.90  Inc VAT
Camera Module for Raspberry Pi Zero Standard (zero cam standard)

How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

Description:


This minimal Camera for the Pi Zero is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there Lennie.

Otherwise it's an economical and svelte solution for birdcams, bodycams, home security and simple computer vision projects.

Only for Raspberry Pi Zero with CSI camera port.

Specifications:

Approx dimensions of camera: 10mm x 11.4mm x 5.1mm

Resources:

Getting started with PiCamera

R319.90  Inc VAT
IQaudio DAC (IQaudio Pi-Dac board)

Description:

The DAC is a HAT compliant add on accessory for the Raspberry Pi A /B /RPi2 /RPi3 or PRi4. The DAC uses the Texas Instruments PCM5122 DAC to deliver analogue audio to the DAC ’s Phono connectors. The PI DAC also supports a dedicated headphone amplifier.

The PDAC can be connected to the Raspberry Pi’s 40way pin header without any additional soldering. The DAC is powered by the Raspberry Pi.



P1 Analogue out (0.. carries GPIO27, MUTE signal (headphone detect), Left and Right Audio and Left and Right Ground.
P6 Headphone socket signals (1: LEFT, 2: GROUND, 3: RIGHT, 4: GROUND, 5: DETECT)

The product brief is available at https://datasheets.raspberrypi.com/iqaudio/iqaudio-product-brief.pdf

What's in the box?

1 x IQaudio DAC
R419.90  Inc VAT
DEDICATED POWER CORD 3 PIN TO CLOVER (clover power cable 2m)
Description:

Mainly used for the power connection on to Laptop Power Supplies (Please check correct for your laptop power supply, some power supplies uses Figure 8 Power cables)

Features:

- Cable can be used on electrical appliances up to 250V
- 3 pin Clover to 3-pin SA Electrical Plug

What's in the box?:

1 x DEDICATED POWER CORD 
R49.90  Inc VAT
Adafruit PiTFT 2.2" HAT Mini Kit - 320x240 2.2" TFT - No Touch (Ada no touch 2.2)

This product contains only the display. Raspberry Pi, case and cables are shown for illustration purposes only and not included.

Description:

The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2" display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top of your Model A or B and fits into our case quite nicely.

It's designed to plug directly onto the Raspberry Pi 2 or Raspberry Pi 1 Model A or B . While not specifically designed for Pi Model A or B,you can use it with A/B if you solder in an extra-tall 2x13 header (not included) instead of the included 2x20 header.

This design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since we had a tiny bit of space, there's 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.

Comes as a fully assembled display PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header.

Technical Details

  • Board Dimensions: 65mm x 57mm x 6mm / 2.6" x 2.2" x 0.2"
  • Screen Dimensions: 55mm x 40mm / 2.2" x 1.6"

Tutorials

To make it super easy for use: Adafruit have created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Their tutorial series shows you how to install the software, play small videos, or display images such as from your PiCam and more!

R336.09  Inc VAT
R402.50
10-bit ADC (SPI) MCP3008 - 8 Channel (10-bit ADC 8 Channel)
Description:

The Raspberry Pi is a great computer but there's just one thing that most hardware hackers will find missing: a few inputs for connecting analog sensors. This is where the MCP3008 chip comes in handy, with eight 10-bit channels accessible over SPI. Thanks to the Raspberry Pi's SPI interfaces and its two 'Chip Select' pins available off of the main GPIO connector, the problem is solved.

Features

  • 10-bit resolution
  • ± 1 LSB max DNL
  • ± 1 LSB max INL
  • 8 input channels
  • Analog inputs programmable as single-ended or pseudo-differential pairs
  • On-chip sample and hold
  • SPI serial interface (modes 0,0 and 1,1)
  • Single supply operation: 2.7V - 5.5V
  • 200 ksps max. sampling rate at VDD=5V
  • 75 ksps max. sampling rate at VDD=2.7V
  • Low power CMOS technology
  • 5 nA typical standby current, 2 µA max.
  • 500 µA max. active current at 5V
  • Industrial temp range: -40°C to 85°C

Applications

  • Sensor Interface
  • Process Control
  • Data Acquisition
  • Battery Operated Systems

How-To

The following sample assumes that you're running the latest official Raspbian distribution, that you're logged in as root and that you haven't yet customized Raspbian to use SPI from a Python script. By default, the kernel module managing SPI communications is not loaded on Raspbian, so let's ensure that the 'spidev' device is available.

[email protected]:/# lsmodModule                  Size  Used by  snd_bcm2835            12808  0  snd_pcm                74834  1 snd_bcm2835  snd_seq                52536  0  snd_timer              19698  2 snd_seq,snd_pcm  snd_seq_device          6300  1 snd_seq  snd                    52489  5 snd_seq_device,snd_timer,snd_seq,snd_pcm,snd_bcm2835  snd_page_alloc          4951  1 snd_pcm  

If 'spidev' device is not listed, we need to remove it from the kernel module 'blacklist' so that it's automatically loaded on the next boot:

[email protected]:/# nano /etc/modprobe.d/raspi-blacklist.conf  

Put a hash character in front of the 'blacklist spi-bcm2708' statement and save the file:

#blacklist spi-bcm2708  

then, manually load the SPI device:

[email protected]:/# modprobe spidev  

The command should just complete without returning an error. Validate the list of modules:

[email protected]:/# lsmod  Module                  Size  Used by  spi_bcm2708             4401  0  spidev                  5136  0  snd_bcm2835            12808  0  snd_pcm                74834  1 snd_bcm2835  snd_seq                52536  0  snd_timer              19698  2 snd_seq,snd_pcm  snd_seq_device          6300  1 snd_seq  snd                    52489  5 snd_seq_device,snd_timer,snd_seq,snd_pcm,snd_bcm2835  snd_page_alloc          4951  1 snd_pcm  

The 'spidev' device should now be available.

Next, install the 'git' package. It will be needed to install other packages from Github.

apt-get install git-core  

Install the 'python-dev' package. It will be needed to compile the 'py-spidev' package.

apt-get install python-dev  

Download and compile the 'py-spidev' package.

[email protected]:/# cd /home  [email protected]:/home# git clone git://github.com/doceme/py-spidev  [email protected]:/home# cd py-spidev/  [email protected]:/home# python setup.py install  

At this point, SPI is available from Python 2.7. Assuming that you have wired the MCP3008 to the Raspberry Pi's SPI bus using CE0 as the 'chip select' pin, you can read all eight analog inputs using the following Python script.

[email protected]:/home# nano adc.py  

Paste the script below in the editor and save it.

import spidev  import time    spi = spidev.SpiDev()  spi.open(0,0)    # read SPI data from MCP3008 chip, 8 possible adc's (0 thru 7)  def readadc(adcnum):          if ((adcnum > 7) or (adcnum < 0)):                  return -1          r = spi.xfer2([1,(8 adcnum)<<4,0])          adcout = ((r[1]&3) << 8)   r[2]          return adcoutwhile True:          for adcInput in range(0,8):                  print "ADC(", adcInput,")=", readadc(adcInput)          time.sleep(1)  

To execute the script

[email protected]:/home# python adc.py  

Sample output using a 10K Ohm trimpot connected to the ADC's pin 3 and all other pins pulled down to ground using a 10k resistor.

ADC( 0 )= 0  ADC( 1 )= 0  ADC( 2 )= 0  ADC( 3 )= 507  ADC( 4 )= 0  ADC( 5 )= 0  ADC( 6 )= 0  ADC( 7 )= 0  

Credits go to Jeremy for his work on the 'py-spidev' Python module which makes working with the MCP3008 straight forward. Alternatively, checkout wiringPi's SPI functions if you prefer using a 'C' API.

Related Tutorials & Samples

R45.90  Inc VAT
Pi Zero USB Stem (zero usb stem)
Description:

The Zero Stem uses the test points underneath your Pi Zero to attach a full-sized USB connector. Convert your Pi Zero or Pi Zero W into a convenient USB dongle.

Just plug it into a free USB port and you can connect to your Pi over USB ethernet and share your computer's internet connection without any additional cables or power supplies.

Zero Stem is soldered onto the bottom of your Pi Zero and secured with bolts, making it convenient to use on the go. Use it to create your own little plug-and-play virtual machine, VNC server, proxy server or combine several into a cluster.

Kit includes:

  • Zero Stem PCB
  • USB connector
  • Nylon bolts and nuts

Details:

  • Compatible with Pi Zero V1.3 (with camera connector) and Pi Zero W.
  • Not compatible with Pi Zero v1.2 (without camera connector)!
  • Supported in Raspbian Jessie Pixel and Lite
  • Setup needed (see below)
  • Requires soldering!

Assembly and Installation:

Visit https://zerostem.io/installation/ for complete assembly instructions.

Preparing Raspbian:

Thanks to Andrew Mulholland for writing up these instructions, which you can find in this GitHub Gist.

In short:

  • Flash your SD card as usual using Etcher or Win32DiskImager
  • Open up the "boot" partition and edit "config.txt", adding "dtoverlay=dwc2" to the bottom
  • Open up "cmdline.txt" and add "modules-load=dwc2,g_ether" after "rootwait"
  • Create a new file named "ssh" in the boot folder

Pop your newly set up SD card into your Pi Zero, plug it into a USB port and you should be able to SSH in to "raspberrypi.local", you will need Bonjour, iTunes or Quicktime installed in Windows or Avahi Daemon in Linux for this to work.

As Seen On Bilge Tank

Convert your Pi Zero or Pi Zero W into a convenient USB dongle.
R129.90  Inc VAT
GPIO Hammer Header Male (Hammer Header Male only)
Description:

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! your header is securely attached to your Pi Zero or pHAT.

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the job. They come in male and female flavours, and use crafty little retaining nubbins to grip tightly into the holes on the PCB.

The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two steel bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read our guide for fitting hammer headers.

We strongly recommend using our installation jig! If you want to try without it then godspeed to you but it is a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig.

Please note: we can't be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow our guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead!

R34.90  Inc VAT
Per Page      81 - 100 of 418