Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Raspberry Pi logo Small sticker set of 10 (10 x Stickers Small)
Description:

12mm long by 9mm wide - adds a splash of colour to laptops, camera cases, fridge doors or anywhere else you can think to put it.

Not only are you helping the Foundations educational aims by buying these, you're also brightening up the world for everyone else :-)


Package includes:

10 x Raspberry Pi Stickers

R59.90  Inc VAT
PN532 NFC HAT for Raspberry Pi, I2C / SPI / UART 13.56MHz (WS NFC hat 13.56)
Description:

This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz frequency range. It supports three communication interfaces: I2C, SPI, and UART.

NFC (Near Field Communication) is a wireless technology allows contactless point-to-point data communication between devices within a short distance of 10 cm. It is widely used in applications such as access control system, smart tickets, meal card, etc.

Based on the popular NFC controller PN532 with multi interface options, this HAT will easily enable NFC function for your Raspberry Pi.

Features
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Onboard PN532 chip, supports various NFC/RFID cards like MIFARE/NTAG2xx, etc.
  • Three interface options: I2C, SPI, and UART, configured via jumpers and switches
  • Breakout control pins, for easily connecting with host boards like STM32/Arduino
  • Comes with development resources and manual (examples for Raspberry Python/C, STM32, Arduino)
Specifications
  • NFC controller: PN532
  • Operating voltage: 3.3V/5V
  • Operating frequency: 13.56MHz
  • Communication interfaces: I2C, SPI, UART (default)
  • Default baudrate: 115200 bps
  • Operating modes:
    • reader/writing mode supporting ISO/IEC 14443A / MIFARE scheme
    • reader/writing mode supporting FeliCa scheme
    • reader/writing mode supporting ISO/IEC 14443B scheme
    • card operation mode supporting ISO 14443A / MIFARE scheme
    • card operation mode supporting FeliCa scheme
    • ISO/IEC18092, ECM340 point-to-point
Applications
  • Contactless payment system
  • Bluetooth and WiFi devices chaining
  • Social sharing function like sharing contacts, photos, and videos
  • Smart phone NFC app
What's on Board
  1. Raspberry Pi GPIO connector: for connecting with Raspberry Pi
  2. PN532 control pins: for connecting with other host boards like STM32
  3. NFC induction coil
  4. PN532 chip: NFC controller
  5. Power indicator
  6. DIP switches: for configuring the connection between PN532 and Raspberry Pi (only one of the I2C/SPI/UART can be connected at the same time)
  7. Mode selection:
    • I0-L, I1-L: enable UART
    • I0-H, I1-L: enable I2C
    • I0-L, I1-H: enable SPI
  8. INT0 jumper: response signal, connects to Raspberry Pi D16
  9. RSTPDN jumper: reset signal, connects to Raspberry Pi D20
Dimensions
Development Resources

Wiki : www.waveshare.com/wiki/PN532_NFC_HAT


R399.90  Inc VAT
Raspberry Pi 4B Aluminium Heatsink Kit(4) (Pi4 silver heatsink kit(4))
Description:

The Heat Sink Kit for Raspberry Pi 4B is a four-piece aluminium heat sink kit which is used to cool the chip on the Raspberry Pi 4B. For silent passive temperature control of your Raspberry Pi.

Specifications:

Material: Aluminum
Colour: Sliver
Size:
  • 14mm x 14mm x 5mm
  • 14mm x 9mm x 5mm
  • 9mm x 9mm x 5mm(2 units)

Packing list:
1 set Aluminum Heat Sinks
R16.90  Inc VAT
128×32 2.23inch OLED display HAT for Raspberry Pi (WS OLED display hat)
Overview

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.

Trying to add a control interface for your Pi? This compact display would be the ideal choice.

Features
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Optional interfaces: SPI (default), or I2C, configured via onboard resistor
  • Brings control pins for host boards like Arduino/STM32
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
  • Driver: SSD1305
  • Interface: SPI / I2C
  • Display size: 2.23inch diagonal
  • Display color: white
  • Resolution: 128×32
  • Viewing angle: >160°
  • Power supply voltage: 3.3V/5V
  • Logic level: 3.3V
Interface
SYMBOLRaspberry Pi PIN (BCM)DESCRIPTION
VCC3V3/5VPower input
GNDGNDGround
DINMOSISPI data input
CLKSCLKSPI clock input
CSCE0Chip selection, low active
DCP24Data/Command selection (high for data, low for command)
RSTP25Reset, low active

Dimensions


Development Resources

Wiki : www.waveshare.com/wiki/2.23inch_OLED_HAT

R249.90  Inc VAT
FLIRC Raspberry Pi 4 Case (FLIRC Pi4 case)
WHAT IS THE FLIRC RASPBERRY PI CASE?

The perfect home for your new Raspberry Pi 4. We will ensure our case is adjusted to fit the latest Raspberry Pi specifications. Our case is made of a beautiful aluminum core heat sink that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it's out of your hands, it blends in with your entertainment system.

WHATS NEW?

This is the first affordable Raspberry Pi case made out of aluminum. We wanted to ensure we didn’t sacrifice form over function, so we used the aluminum housing of the case to provide a built in heat sink. Supplied with the case is a thermal pad and 4 screws for the simplest Raspberry Pi case assembly on the market. It only takes seconds to drop your Raspberry Pi into it’s amazing new home and show it off on your counter top. .

THERE'S MORE...

We included rubber feet to raise the enclosure so it just hovers underneath your television. In addition to the built in heat sink, small ventilation slots on the bottom help keep the Raspberry Pi cool. GPIO pins are accessible through the slot on the bottom of the case and there is no need for disassembly to get to the SD card. We know you will love the attention to detail we put in throughout the case.

FAQs
  • Does the case support the Raspberry Pi 4?
    • Yes, designed, proven, and tested only for the Raspberry Pi 4B
  • Can I see the Raspberry Pi's LEDs?
    • Yes, you can.
  • Why did you make a Raspberry Pi case?
    • Flirc is one of the best selling items for the Raspberry Pi. We haven't only been concentrating on Flirc, we've been concentrating on enhancing media centers and their experiences. We've got more coming.
  • What does the case come with?
    • The case comes partially assembled. All you need to do is put your thermal pad on the CPU, drop your Raspberry Pi inside the case, and screw the bottom of the case on with the included screws.
  • Does the case come with a Raspberry Pi?
    • The case does not come with a Raspberry Pi.
  • Can I access the SD Card?
    • Yes, the SD card is accessible through a slot on the front of the case.
  • How do I attach the Thermal Pad?
    • Take off the plastic force fields from both sides and place it on the CPU.
  • Does this case support the Raspberry Pi 3B , 3B, or 2?
    • No
  • What kind of thermal pad do you use?
    • ARCTIC Thermal pad (1.5mm thick)
R379.90  Inc VAT
PoE HAT Case for Raspberry Pi 3/4 (V2.0) (Pi4 POE case)
Description

This Raspberry Pi PoE HAT case is our own design manufactured right here in our warehouse!

The case brings together the Raspberry Pi (4 or 3), and Official Raspberry Pi PoE HAT into one simple, neat package.

Designed to be stylish and functional, the PoE HAT Case features side and top 'hex' ventilation for the PoE HAT fan to keep your Raspberry Pi nice and cool, and enables access to all the Raspberry Pi Ports whilst keeping both boards safe and sound!

We now include two lids - one for the PoE HAT, and another for the original PoE HAT.

New for v2.0

  • Now fits both the Raspberry Pi 3/3B and the Raspberry Pi 4 (via the included alternative side panels)
  • Rounded port holes
  • New signature hex-pattern air vents
  • Glass-look top
  • ...and a few other tweaks and changes. It's our best PoE HAT case yet!

Features

  • Compatible with Raspberry Pi 4 and 3 (alternate side panels included)
  • Laser Cut Acrylic
  • Easy Assembly
  • Built-in 'hex' air vents
  • Enables access to all Raspberry Pi Ports
  • Manufactured in the UK

Assembly

Assembly Guide

R174.90  Inc VAT
Enviro for Raspberry Pi (enviro sensor phat)
Description:

Monitor your world with Enviro for Raspberry Pi! There's a whole bunch of fancy environmental sensors on this board, and a gorgeous little full-colour LCD to display your data. It's the perfect way to get started with citizen science!

Designed for environmental monitoring, Enviro  lets you measure air quality (pollutant gases and particulates*), temperature, pressure, humidity, light, and noise level. When combined with a particulate matter sensor*, it's great for monitoring air quality just outside your house (more information below), or without the particulate sensor you can use it to monitor indoor conditions.

Enviro  is an affordable alternative to environmental monitoring stations that can cost tens of thousands of pounds and, best of all, it's small and hackable and lets you contribute your data to citizen science efforts to monitor air quality via projects like Luftdaten.

Features

  • BME280 temperature, pressure, humidity sensor (datasheet)
  • LTR-559 light and proximity sensor (datasheet)
  • MICS6814 analog gas sensor (datasheet)
  • ADS1015 analog to digital converter (ADC) (datasheet)
  • MEMS microphone (datasheet)
  • 0.96" colour LCD (160x80)
  • Connector only for particulate matter (PM) sensor*(sensor is not included)
  • pHAT-format board
  • Fully-assembled
  • Compatible with all 40-pin header Raspberry Pi models
  • Pinout
  • Python library
  • Dimensions: 65x30x8.5mm

A couple of nice little extras... there's a spare ADC channel broken out on a header if you want to connect another analog sensor, along with I2C pins in the right configuration for plugging one of our Pimoroni I2C breakouts onto!

Citizen science air quality monitoring

We've developed this board in collaboration with the University of Sheffield, with the aim of letting you contribute real-time air quality data from your local area to open data projects like Luftdaten.

The alarming drop in our air quality is something that's really important to understand. Devices like Enviro  allow fine-grained, detailed datasets that let us see shifts in air quality through time and across different areas of cities. The more devices that contribute data, the better quality the dataset becomes.

Particulate matter (PM) is made up of tiny particles that are a mix of sizes and types, like dust, pollen, mould spores, smoke particles, organic particles and metal ions, and more. Particulates are much of what we think of as air pollution. They can be measured, in size and quantity, by particulate matter sensors like the PMS5003 that you can connect to Enviro .

The analog gas sensor can be used to make qualitative measurements of changes in gas concentrations, so you can tell broadly if the three groups of gases are increasing or decreasing in abundance. Without laboratory conditions or calibration, you won't be able to say "the concentration of carbon monoxide is n parts per million", for example.

Temperature, air pressure and humidity can all affect particulate levels (and the gas sensor readings) too, so the BME280 sensor on Enviro  is really important to understanding the other data that Enviro outputs.

We've got a tutorial (coming soon) that shows you how to use Enviro  and a few easily-available bits to build the board into a weather-proof housing that you can mount outside your house to monitor local air quality.

Indoor monitoring

As well as outdoor air quality monitoring, Enviro  is really good for indoor monitoring too. The temperature, humidity, light, and noise readings can be used to keep track of conditions in your home and, combined with the LCD to display the data and the proximity sensor for interaction, it makes an ideal headless monitoring device.

Why not combine it with some IoT smarts like an Alexa skill so that you can ask what the temperature or humidity is? Or you could set up a trigger action with IFTTT that turns your Philips Hue lights on when the light level drops below a certain level. There's loads of possibilities!

Software

We've put together a Python library to control all the parts of your Enviro . There's a bunch of examples for each of the individual parts, an all-in-one example that shows you the data from Enviro 's sensors in a visual way. There's also an example that shows you how to contribute data to Luftdaten (requires particulate matter sensor).

Getting started

Have a read through our (exhaustive!) Getting Started with Enviro  tutorial that walks you through how to install the software, how to run the code examples, and how to use the Enviro  Python library.

R959.90  Inc VAT
Raspberry Pi Camera Board Replacement Cable 150mm (Cam cable 150mm)
Description:

The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
 
This replacement cable is 150mm long.
 
The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 150mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: 80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2 
R14.90  Inc VAT
Men's Raspberry Pi T shirt Black Small (RPi T shirt Black S)
Description:

The Raspberry Pi logo, outlined in white, on this vibrant red T-shirt.

This is a high-quality heavy cotton T-shirt, with a beautifully screen-printed full colour Raspberry Pi logo.

Specifications:

  • 90% cotton with 10% polyester
  • Full colour screen-printed logo
  • Preshrunk, machine washable, can be tumble dried
  • Seamless double needle 7/8 collar, with taped neck and shoulders
  • Double needle sleeve and bottom hems
  • Quarter-turned to eliminate center crease

Take good care of your T-shirt by machine washing on a warm setting inside out with like colours. Tumble dry on a medium setting. Do not dry clean.

R189.90  Inc VAT
R199.90
Pirate Audio: Line-out for Raspberry Pi (Pirate Audio: Line-out)
Description:

Plug Pirate Audio Line-out for Raspberry Pi into your hi-fi amp or powered speakers, then sit back, relax, and soak in the rich, digital audio. It has a high-quality I2S DAC, high-res colour display, and playback control buttons.

This board is perfect for upgrading an existing hi-fi amp and speakers, or a set of powered monitors, with digital audio from local audio files (MP3, FLAC, etc.) or from streaming services like Spotify. The DAC on Pirate Audio Line-out gives you crisp 24-bit / 192KHz digital audio through its 3.5mm stereo jack.

Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.

Features
  • Line-level digital audio (24-bit / 192KHz) over I2S
  • PCM5100A DAC chip (datasheet)
  • 3.5mm stereo jack
  • 1.3" IPS colour LCD (240x240px) (ST7789 driver)
  • Four tactile buttons
  • Mini HAT-format board
  • Fully-assembled
  • Compatible with all 40-pin header Raspberry Pi models
  • Pirate Audio software
  • Dimensions: 65x30.5x9.5mm
Software

Our Pirate Audio software and installer installs the Python library for the LCD, configures the I2S audio and SPI, and then installs Mopidy and our custom Pirate Audio plugins to display album art and track info, and to use the buttons for playback control.

Here's how to get started:

  1. Set an SD card up with the latest version of Raspbian.
  2. Connect to Wi-Fi or a wired network.
  3. Open a terminal and type the following:

    git clone https://github.com/pimoroni/pirate-audio
    cd pirate-audio/mopidy
    sudo ./install.sh


  4. Reboot your Pi

You can find more detailed instructions here: https://github.com/pimoroni/pirate-audio/tree/master/mopidy

Notes

Note that our installer, linked above, does all of the below for you, but if you're an intrepid hacker then you might need to know this stuff!

  • The DAC can be configured by adding dtoverlay=hifiberry-dac to the /boot/config.txt file.
  • There is a DAC enable pin—BCM 25— that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the /boot/config.txt file.
  • The buttons are active low, and connected to pins BCM 5, 6, 16, and 20
  • The display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.
  • If you want to use these boards with a Pibow Coupé case (either for the Zero / Zero W or Pi 4), then you'll need to use a booster header to raise it up a little.
R419.90  Inc VAT
Pirate Audio: Headphone Amp for Raspberry Pi (Pirate Audio: Headphone)
Description:

The ultimate hackable headphone amp for your desk! Pirate Audio Headphone Amp for Raspberry Pi has an I2S DAC, headphone amplifier, high-res display, and playback control buttons.

Build your own home-brew iPod Nano with Pirate Audio Headphone Amp! It's an all-in-one solution, with gorgeous album art display, track info, and playback controls, for playing your local audio files (MP3, FLAC, etc) or streaming music from Spotify. The DAC and headphone amp give you crisp digital amplified audio through your wired headphones.

Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.

Features

  • Amplified digital audio (24-bit / 192KHz) over I2S
  • PAM8908 headphone amplifier chip (datasheet)
  • Low-gain / high-gain switch (high-gain boosts by 12dB)
  • PCM5100A DAC chip (datasheet)
  • 3.5mm stereo jack
  • 1.3" IPS colour LCD (240x240px) (ST7789 driver)
  • Four tactile buttons
  • Mini HAT-format board
  • Fully-assembled
  • Compatible with all 40-pin header Raspberry Pi models
  • Pirate Audio software
  • Dimensions: 65x30.5x9.5mm

Software

Our Pirate Audio software and installer installs the Python library for the LCD, configures the I2S audio and SPI, and then installs Mopidy and our custom Pirate Audio plugins to display album art and track info, and to use the buttons for playback control.

Here's how to get started:

  1. Set an SD card up with the latest version of Raspbian.
  2. Connect to Wi-Fi or a wired network.
  3. Open a terminal and type the following:

    git clone https://github.com/pimoroni/pirate-audio
    cd pirate-audio/mopidy
    sudo ./install.sh


  4. Reboot your Pi

You can find more detailed instructions here: https://github.com/pimoroni/pirate-audio/tree/master/mopidy

Notes

Note that our installer, linked above, does all of the below for you, but if you're an intrepid hacker then you might need to know this stuff!

  • The low-gain mode is recommended for most use-cases.
  • The DAC can be configured by adding dtoverlay=hifiberry-dac to the /boot/config.txt file.
  • There is a DAC enable pin—BCM 25— that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the /boot/config.txt file.
  • The buttons are active low, and connected to pins BCM 5, 6, 16, and 20
  • The display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.
  • If you want to use these boards with a Pibow Coupé case (either for the Zero / Zero W or Pi 4), then you'll need to use a booster header to raise it up a little.
R419.90  Inc VAT
Pirate Audio: 3W Stereo Amp for Raspberry Pi (Pirate Audio: 3W Amp)
Descripton:

Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi! Get punchy digital audio through the push-fit terminals and control your music with the built-in colour LCD and playback control buttons.

The push-fit connectors on Pirate Audio 3W Stereo Amp make it super-simple to connect up a set of speakers, whether they're bookshelf or floor-standing speakers, or the speakers in an old radio. Play crisp digital audio from local files (MP3, FLAC, etc.) or stream from services like Spotify. The combined DAC and amp gives you crisp 24-bit / 192KHz digital audio through your connected stereo speakers (or mixed-down mono through a single channel).

Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.

Features
  • MAX98357A DAC / amplifier chip x2 (datasheet)
  • Stereo 3W (per channel) audio out
  • Push-fit speaker terminals
  • Switch for stereo / mixed-down mono modes
  • 1.3" IPS colour LCD (240x240px) (ST7789 driver)
  • Four tactile buttons
  • Mini HAT-format board
  • Fully-assembled
  • Compatible with all 40-pin header Raspberry Pi models
  • Pirate Audio software
  • Dimensions: 65x30.5x9.5mm
Software

Our Pirate Audio software and installer installs the Python library for the LCD, configures the I2S audio and SPI, and then installs Mopidy and our custom Pirate Audio plugins to display album art and track info, and to use the buttons for playback control.

Here's how to get started:

  1. Set an SD card up with the latest version of Raspbian.
  2. Connect to Wi-Fi or a wired network.
  3. Open a terminal and type the following:

    git clone https://github.com/pimoroni/pirate-audio
    cd pirate-audio/mopidy
    sudo ./install.sh


  4. Reboot your Pi

You can find more detailed instructions here: https://github.com/pimoroni/pirate-audio/tree/master/mopidy

Notes

Note that our installer, linked above, does all of the below for you, but if you're an intrepid hacker then you might need to know this stuff!

  • The push-fit connectors require you to push gently on the tab to allow the cable to be inserted / removed. Do this carefully, to avoid breaking the clip!
  • The DAC can be configured by adding dtoverlay=hifiberry-dac to the /boot/config.txt file.
  • There is a DAC enable pin—BCM 25— that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the /boot/config.txt file.
  • The buttons are active low, and connected to pins BCM 5, 6, 16, and 20
  • The display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.
  • If you want to use these boards with a Pibow Coupé case (either for the Zero / Zero W or Pi 4), then you'll need to use a booster header to raise it up a little.
R419.90  Inc VAT
Pirate Audio: Speaker for Raspberry Pi (Pirate Audio: Speaker)
Description:

Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons.

Pirate Audio Speaker is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console! The built-in 1W speaker isn't the loudest but it's great fun for lots of projects. The display and playback buttons let you control your audio or sound effects in a jiffy. Use our Pirate Audio software (more info below) to play local audio files (MP3, FLAC, etc) or stream from services like Spotify.

Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.

Features

  • MAX98357A DAC / amplifier chip (datasheet)
  • Mono audio
  • Mini speaker (1W / 8Ω, attached)
  • Push-fit speaker terminals
  • 1.3" IPS colour LCD (240x240px) (ST7789 driver)
  • Four tactile buttons
  • Mini HAT-format board
  • Fully-assembled
  • Compatible with all 40-pin header Raspberry Pi models
  • Pirate Audio software
  • Dimensions: 65x30.5x9.5mm

Software

Our Pirate Audio software and installer installs the Python library for the LCD, configures the I2S audio and SPI, and then installs Mopidy and our custom Pirate Audio plugins to display album art and track info, and to use the buttons for playback control.

Here's how to get started:

  1. Set an SD card up with the latest version of Raspbian.
  2. Connect to Wi-Fi or a wired network.
  3. Open a terminal and type the following:

    git clone https://github.com/pimoroni/pirate-audio
    cd pirate-audio/mopidy
    sudo ./install.sh


  4. Reboot your Pi

You can find more detailed instructions here: https://github.com/pimoroni/pirate-audio/tree/master/mopidy

Notes

Note that our installer, linked above, does all of the below for you, but if you're an intrepid hacker then you might need to know this stuff!

  • The DAC can be configured by adding dtoverlay=hifiberry-dac to the /boot/config.txt file.
  • There is a DAC enable pin—BCM 25— that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the /boot/config.txt file.
  • The buttons are active low, and connected to pins BCM 5, 6, 16, and 20
  • The display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.
  • If you want to use these boards with a Pibow Coupé case (either for the Zero / Zero W or Pi 4), then you'll need to use a booster header to raise it up a little.
R369.90  Inc VAT
Argon ONE V2 Aluminum Case for Raspberry Pi 4 with Safe Power Button (Argon One V2 case Pi4)
Note: ExplainingComputers has a great video on this case at https://www.youtube.com/watch?v=IJn3fz7Zk4Q


Argon ONE V2 Aluminum Case Pi 4 Applicable

Make a shiny mini-computer by this decent aluminium-alloy case customized for Raspberry Pi 4

Sleek Aluminum-alloy Enclosure

Aluminum-alloy enclosure with modern space grey finish, robust and nice looking

Removable Top and GPIO Recess

Neat GPIO recess along with magnetic removable top, both aesthetic and protective, there are even clear pin labels and color-coded header, make it easier to use

Amazing Temperature Management

The extension pillars makes the aluminum case become a big heatsink to transfer heat from the board, combined with the cooling fan and multi airflow vents, cooling effect can't be better


Tidy cable management

All of the ports are accessed at the back, minimal cable clutter

Safe & handy power button

Dedicated power button, combined with one-line script, to turn the computer on / off while ensuring the stored files are safe, also supports customized function

Easy assembly without messy wiring

Comes with two PCB boards to simply build it up, no messy wiring, no wrong connection, more stable, more safe

Proper bottom design

TF card slot on the bottom, as well as two airflow vents and four rubber feet

Development Resources

Wiki: www.waveshare.com/wiki/PI4-CASE-ARGON-ONE

R529.90  Inc VAT
Argon NEO Raspberry Pi4 Case (Argon Neo Pi4 case)
Description:

  • MINIMALIST DESIGN |The Argon NEO is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B.
  • SLIM ALUMINUM ENCLOSURE | Made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics.
  • PASSIVE COOLING | The case acts as passive cooling for the high demands of the Raspberry Pi 4 Model B.
  • ROBUST YET PORTABLE | Assembling the case with the Raspberry Pi is easy. With the case's small form, it's easy to bring anywhere.
  • SLIDING MAGNETIC TOP | The case has a magnetic top to keep the ports safe when not in use.
  • ACCESS TO ALL PORTS | All the ports of the Raspberry Pi 4 while keeping the Pi safe.

Compatibility:

Raspberry Pi 4 Model B
Length: 9.53 cm
Width: 7.15 cm
Height: 2.75 cm

R279.90  Inc VAT
Raspberry Pi Zero W Case Blue ABS with GPIO Reference (Blue Zero ABS case)
Introduction :

This case is suitable for the Raspberry Pi ZERO range. There is GPIO references on the cover making it a very useful case

Features:

1. GPIO reference on the the top of case - you needn't search for the references online.
2. Hole on the buttom of case -   you can mount the case on the wall
3. Translucent color design - make the case more beautiful and you can see the pi in the case
4. Use for Raspberry Pi ZERO range

Specifications :

1. Material : ABS
2. Weight : 17 g approx
3. Size ( L x W x H) : 72mm x 34mm x 17mm approx

Package Includes :

1 x Raspberry Pi Zero Case
R59.90  Inc VAT
Black ABS Shell Case for Raspberry Pi Zero (Shell black zero case)
Introduction:

The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .

Install Tips:

1.The 2 short screws is used to fix the raspberry pi zero in the case from inside.
2.The 2 long screws is used to fix the raspberry pi zero from outside

Features:

Material : ABS
Color: Available in Black  and Frosted

Package includes:

1 x Raspberry Pi Zero ABS Case
R59.90  Inc VAT
Frosted ABS Shell Case for Raspberry Pi Zero (Shell frosted zero case)
Introduction:

The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .

Install Tips:

1.The 2 short screws is used to fix the raspberry pi zero in the case from inside.
2.The 2 long screws is used to fix the raspberry pi zero from outside

Features:

Material : ABS
Color: Available in Black  and Frosted

Package includes:

1 x Raspberry Pi Zero ABS Case
R59.90  Inc VAT
Stepper Motor HAT for Raspberry Pi Drives Two Stepper Motors (WS stepper RPi board)
Overview

This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping.

Features
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Adjustable motor drive current via potentiometer, maximum 2.5A current output
  • Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO)
  • Integrates 5V regulator, allows providing power to Raspberry Pi
  • Onboard multi connector options for stepper motors in different specifications
  • Comes with development resources and manual (examples in BCM2835, wiringPi, and python)
Specifications
  • Motor controller: DRV8825
  • Motor drive voltage: 8.2V~28V
  • Motor drive current: 2.5A
  • Logic voltage: 3.3V
  • Dimension: 65mm × 56mm
  • Mounting hole size: 3.0mm
Applications
  • 3D Printer
  • Sculpturing machine
  • Mechanical arm
Demo

Note: this 9V/2A Power Supply is recommended for driving SM24240, SM25776, 5V Step Motor

Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/Stepper_Motor_HAT

R549.90  Inc VAT
The Official Raspberry Pi Camera Guide (cam guide)
Synopsis

One of the most popular add-ons for the Raspberry Pi, the official Camera Module – or the new High Quality Camera – turns your favourite single-board computer into a powerful digital camera.
Launched back in 2013, the original Camera Module was succeeded by the higher-spec v2 in April 2016. The High Quality Camera, due to launch on 30 April 2020, offers Ultra HD image resolution and enables you to attach any standard C- or CS-mount lens.

In this book we show readers how to get started with their Raspberry Pi camera, taking photos and videos from the command line and writing Python programs to automate the process. We’ll reveal how to create time-lapse and slow-motion videos, before moving on to a range of exciting
projects. There are just so many things that can be done with a Raspberry Pi camera!

• Learn how to set up the new High Quality Camera, attach a
lens, and start capturing images
• Take selfies and shoot stop-motion videos
• Build a wildlife camera and also an underwater one
• Make a smart door with a video doorbell
• Set up a security camera to monitor your home
• And much more!
R219.90  Inc VAT
Per Page      101 - 120 of 291