Search

The Project Box for Raspberry Pi contains all the components needed, together with easy to follow instruction cards, in order to complete 10 simple projects involving LEDs, thermistor, phototransistor and switches and is an ideal starting point for anyone new to electronics and the Raspberry Pi.

Specifications:

This kit is an improved and updated version of the now retired Electronics Starter Kit for Raspberry Pi

A 40 page booklet by Simon Monk (author of the Raspberry Pi Cookbook and Programming Raspberry Pi) is free to download and explains how to use the kit and build the projects.


What's in the box ?

1 x Solderless breadboard
1 x Male to male jumper wires
1 x Female to Male Jumper Wires
1 x Raspberry Leaf 
5 x 470Ω resistor (yellow, purple, brown stripes)
2 x 1kΩ resistor (brown, black, red)
1 x 4.7MΩ resistor (yellow, purple and green stripes)
1 x 330nF capacitor
2 x Red LED – the longer lead is the (positive) lead
1x RGB LED – the longest lead is the – (negative) lead
2 x Tactile push switch
1 x Phototransistor
1 x Thermistor
1 x Buzzer

Raspberry Pi is NOT INCLUDED


Resources :

Instructions (PDF)

The Squid Combo Pack comprises a Raspberry Squid RGB LED, two Squid buttons (non-latching) and a Raspberry leaf to help identify the GPIO pins.

A bright RGB (Red, Green, Blue) LED with built-in resistors and female header leads that can just plug directly onto the GPIO pins of a Raspberry Pi.

What's in the box ?

1 x LED
2 x Buttons
1 x Raspberry Leaf

Resources:

Instructions(PDF)





(* Raspberry Pi NOT included *)

Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico.

The Robotics Board features 2 Dual H Bridge Motor Driver ICs. These are capable of driving 2 standard motors or 1 stepper motor each, with full forward, reverse, and stop control. There are also 8 servo outputs, capable of driving standard and continuous rotation servos. They can all be controlled by the Pico using the I2C protocol, via a 16 channel driver IC. The IO break out provides connections to all the unused pins on the Pico. The 27 available I/O pins allow other devices, such as sensors or ZIP LEDs, to be added to the board.

Power is provided via either a terminal block or servo style connector. The supply is then controlled by an on/off power switch to the board and there is also a green LED to indicate when the board has power. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected Pico. This removes the need to power the Pico separately. The 3V and GND pins are also broken out on the header, which means external devices can also be powered.

To use the robotics board, the Pico should be firmly inserted into the dual row pin socket on the board. Ensure the Pico is inserted with the USB connector at the same end as the power connectors on the robotics board. This will allow access to all of the board functions and each pin broken out.


Features :

• A compact yet feature-packed board designed to sit at the heart of your Raspberry Pi Pico robotics projects.
• The board can drive 4 motors (or 2 stepper motors), with full forward, reverse, and stop control, and 8 servos.
• It also features 27 other I/O expansion points and Power and Ground connections.
• The I2C communication lines are also broken out allowing other I2C compatible devices to be controlled.
• Additionally, the board features an on/off switch and power status LED.
• Power the board via either a terminal block or servo style connector.
• The 3V and GND pins are broken out to solder pads, allowing external devices to be powered.
• Code it with MicroPython via an editor such as the Thonny editor.

 (* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)


(* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)




(* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)

The FLIRC Raspberry Pi Zero Case is finally here - overly engineered, affordable and adorable!

The FLIRC Zero shares the same genetics as the original FLIRC case with some added features. FLIRC have kept everything that makes the original case great, shrunk it down, and added some nice elements that make this mini PC for every day carry.

The familiar aluminium casing with a core heatsink and smooth top is there, offering silent, passive and efficient cooling combined with great looks.

The SD Card is enclosed inside the case so it won't slip out or get stolen. The case needs to be disassembled before the SD card can be removed. There’s even a pre-installed lanyard included in the box in case you want to take your Zero somewhere other than the home.

Two top covers are included with the FLIRC Zero – allowing you to hide away and protect your GPIO, or leave it exposed for prototyping your projects. You can even add a pHAT without worrying about your Zero’s temperature.

Notes

1 x The Raspberry Pi Zero’s LEDs are not visible with this case
1 x Lanyard is removable (but fiddly to get back on)
1 x Ships with a thermal pad – fit this to the case heatsink core before fitting your Raspberry Pi Zero

This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band. It allows data transmission up to 5km through serial port.

By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.

Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.


Features:

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
• Onboard CP2102 USB TO UART converter, for serial debugging
• Brings the UART control interface, for connecting host boards like Arduino/STM32
• 4x LED indicators, easy to check the module status
• LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference
• Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
• Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications
• Customizable communication key which won't be retrieved, greatly improves the security of user data
• Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment
• Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network
• Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter
• Supports fixed-point transmission, broadcast, signal channel monitor
• Comes with development resources and manual (examples for Raspberry Pi/STM32)

What's in the box ?

1. SX1262 868M LoRa HAT x1
2. USB type A plug to micro plug cable x1
3. 868MHz antenna x1

(* Raspberry Pi NOT included *)









Specifications on board:




Dimensions :

Features:

• Specially designed for Raspberry Pi 400.
• Compatible with Raspberry Pi 3 & 4.
• Extension pins for HAT.
• Clearly labelled GPIOs breakout for jumper wires.
• Status LEDs for each GPIOs.
• 1 x programmable buzzer.
• 4 x programmable push buttons.
• 3 x Grove ports (GPIO, UART & I2C) for external modules.
• Onboard 3.3V regulator provides extra current up to 800mA.

• 1 x Maker Hat Base
• 1 x Mini Breadboard (Random Color)
• 1 x 40 Ways Female to Female IDE cable (10cm)
• 1 x Flat Cable Clamper with Adhesive (60mm)
• 4 x Silicone Bumper

Resources:

• Datasheet
• CAD File

A spacious 2.0" (320 x 240) IPS LCD display for Raspberry Pi Pico, with four buttons, an RGB LED and plenty of room for your Pico projects!

This 18-bit capable 320x240 pixel IPS display adheres majestically to the back of your Pico, and has lush colours and great viewing angles. Just like our smaller Display Pack, we've surrounded it with four tactile buttons so you can use your human fingers (or other non-human appendages) to interface with your Pico. There's also an RGB LED that you can use as an indicator, for notifications or just for adding extra rainbows.

Pico Display 2.0 lets you turn a Pico into a user interface device for a bigger project, capable of giving instructions, displaying readouts and even incorporating elaborate nested menus. If you'd rather use your Pico as a standalone device you could fill up all that prime screen real estate with digitally generated, Mandelbrot-esque art, beautiful graphs or readouts from lots of sensors. You could even make a device for getting folks to share their secrets via Telnet!

A Raspberry Pi Pico is not included - click here if you'd like to buy one!

Your Pico will need to have male headers soldered to it (with the pins pointing downwards) to attach to our add-on boards.

• 2.0” 320x240 pixel IPS LCD screen (~220 PPI, 65K colours)
• 4 x tactile buttons
• RGB LED
• Pre-soldered female headers for attaching to Pico
• Compatible with Raspberry Pi Pico.
• Fully assembled
• No soldering required (as long as your Pico has header pins attached).
• Dimensions: approx 56mm x 35mm x 11mm (L x W x H, includes display)
• Screen usable area: 40.8mm x 30.6mm (L x W)
• C/C and MicroPython libraries
• Schematic

The labels on the underside of Pico Display will show you which way round to plug it into your Pico - just match up the USB port with the markings on the board.

The easiest way to get started is by downloading and copying our custom MicroPython uf2 to your Pico, it includes all the libraries you'll need to use our add-ons. Click here for our beginner friendly tutorial!

You can find C examples here and MicroPython examples here. You can also use it with CircuitPython!

• This screen is a wee bit taller than the surrounding buttons, so it's worth taking care when pressing the buttons that you're not also pressing down on the screen, particularly at the edge with the ribbon cable. Careful pressing with fingertips rather than full on thumb mashing is the way forward!
• Even though it's bigger than our other Pico Packs, Display 2.0 will still work with Pico Omnibus or Pico Decker, if you want to use more than one Pico Pack at once. Please note that if you plug Display 2.0 into a Pico Decker, it will overhang the addon slot next to it.

Raspberry Pi Pico is a flexible, low cost microcontroller development board from the folks at Raspberry Pi, based on their very own chip - the RP2040. It's easily programmable over USB with C/C or MicroPython, and ideal for using in all sorts of physical computing projects, devices and inventions - we're so excited to see what you make with it!

We've called our Pico-sized add-ons packs, as they're designed to attach to the back of your Pico as if it were wearing a very stylish back pack (or a miniature jet pack, if you prefer). We've also got Pico bases (larger add-on boards with a space to mount your Pico on top) and some other boards that let you do interesting hackerly things like using multiple packs at once - click here to view them all!


What's in the box ?

1 x Raspberry Pi Pico display (320 x 240) IPS LCD 

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
• Onboard Ethernet to UART transparent transceiver, 2-CH UART, standalone transparent transmission for each channel
• Onboard jumpers for pin configurations
• Embedded Ethernet MAC and PHY layers
• Bi-direction transparent data transmission between UART and Ethernet
• 10/100M, full-duplex/half-duplex auto-negotiation Ethernet interface, 802.3-compliant
• Auto-MDI/MDIX, detect and switch cable type automatically
• Supports DHCP auto-obtained IP and DNS domain access
• Network parameter configuration like chip operating mode, port, IP, via host computer software or UART command
• Four operating modes: TCP CLIENT, TCP SERVER, UDP CLIENT, UDP SERVER
• Full-duplex or half-duplex UART communication, supports RS485 RX/TX auto switch (external RS485 controller required)
• Supports virtual serial port software (provided)
• KEEPALIVE mechanism support
• Comes with development resources and manual (examples for Pico/Raspberry Pi/Arduino/STM32)

Description:

Cytron Maker Pi RP2040 features the first microcontroller designed by Raspberry Pi - RP2040, embedded on a robot controller board. This board comes with dual channel DC motor driver, 4 servo motor ports and 7 Grove I/O connectors, ready for your next DIY robot / motion control project. Now you can build robot, while trying out the new RP2040 chip.

The DC motor driver onboard is able to control 2x brushed DC motors or 1x bipolar/unipolar stepper motor rated from 3.6V to 6V, providing up to 1A current per channel continuously. The built-in Quick Test buttons and motor output LEDs allow functional test of the motor driver in a quick and convenient way, without the need of writing any code. Vmotor for both DC and servo motors depends on the input voltage supplied to the board.

Features:

• Powered by Rapberry Pi RP2040
  • Dual-core Arm Cortex-M0 processor
  • 264KB internal RAM
  • 2MB of Flash memory
  • the exact same specifications with Raspberry Pi Pico
• Robot controller board
  • 4x Servo motors
  • 2x DC motors with quick test buttons
• Versatile power circuit
  • Automatic power selection: USB 5V, LiPo (1-cell) or Vin (3.6-6V)
  • Built-in 1-cell LiPo/Li-Ion charger (over-charged & over-discharged protection)
  • Power on/off switch
• 13x Status indicator LEDs for GPIO pins
• 1x Piezo buzzer with mute switch
• 2x Push button
• 2x RGB LED (Neopixel)
• 7x Grove ports (flexible I/O options: digital, analog, I2C, SPI, UART...)
• Preloaded with CircuitPython by default
• Mouting holes
  • 4x 4.8mm mounting hole (LEGO® pin compatible)
  • 6x M3 screw hole

• 1x Maker Pi RP2040
• 4x Grove to Female Header Cable
• 1x Mini Screwdriver
• 1x Silicone Rubber Feet (Pack of 4)

Resources:

• Getting Started with Maker Pi RP2040 & Example Code
• Maker Pi RP2040 Datasheet
• Maker Pi RP2040 Schematic
• Maker Pi RP2040 VS. Maker Pi Pico comparison table
• CircuitPython for Maker Pi RP2040
• 3D CAD
• Getting Started with RP2040 (Raspberry Pi official page)
• RP2040 Datasheet

There are three ways to supply power to the Maker Pi RP2040 - via USB (5V) socket, with a single cell LiPo/Li-Ion battery or through the VIN (3.6-6V) terminals. However only one power source is needed to power up both controller board and motors at a time. Power supply from all these power sources can all be controlled with the power on/off switch onboard.




Maker Pi RP2040 features all the goodness of Cytron's Maker series products. It too has lots of LEDs useful for troubleshooting (& visual effects), is able to make quite some noise with the onboard piezo buzzer and comes with push buttons ready to detect your touch.

•     Set up Raspberry Pi for retro gaming
•     Emulate classic computers and consoles
•     Learn to program retro-style games
•     Build a portable console, arcade cabinet, and pinball machine
•     And much, much more!

• Create games and fun Python programs
• Learn how to create your own graphical user interfaces
• Use windows, text boxes, buttons, images, and more
• Learn about event-based programming
• Explore good (and bad) user interface design

16MP Camera Module for All Pis.

2 times higher resolution than the v2 camera, 40% higher than the HQ camera. Based on the 16MP Sony IMX519 sensor, this new camera module gives all Raspberry Pi hackers every bit of power they need to build future-proof projects.

V1/V2 Size, with Autofocus.

The community has been craving autofocus in Pi cameras, so Arducam took the advice. This camera has the classic V1/V2 form-factor so you can add hassle-free upgrades to your existing projects, or build new applications with the best flexibility on cameras.

Crisper Images/Videos Than The HQ Camera.

It’s not just the resolution bump, the “quality” is way higher than the HQ Camera too. With the same camera tuning algorithms from the foundation, this module beats the Raspberry Pi HQ camera in every aspect. (sharpness/saturation/exposure/etc.)

Safety instructions:

• Before connecting, you should always power the Raspberry Pi off and remove the power supply first.
• Make sure the cable on the camera board is locked in place.
• Make sure the cable is correctly inserted in the Raspberry Pi board’s MIPI CSI-2 connector.
• Avoid high temperatures.
• Avoid water, moisture, or conductive surfaces while in operation.
• Avoid folding, or straining the flex cable.
• Avoid cross-threading with tripods.
• Gently push/pull the connector to avoid damaging the printed circuit board.
• Avoid moving or handling the printed circuit board excessively while it’s in operation.
• Handle by the edges to avoid damages from electrostatic discharge.
• Where the camera board is stored should be cool and as dry as possible.
• Sudden temperature/humidity changes can cause dampness in the lens and affect the image/video quality.

Specifications:

• Sensor: Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534)
• Output: RAW10/8, COMP8
• Lens: Autofocus;  f/1.75; EFL: 4.28; FoV: 80°; Focus Range: 10 cm ~ infinite
• IR cut Filter: Integrated
• Tripod mount: 1/4”-20
• Enclosure: ABS, also compatible w/ camera module v1 & v2.
• Ribbon Cable Length: 150mm

What's in the box?

• 1 x ArduCam 16MP IMX519 Autofocus Camera Module for RPi with case
• 1 x 15cm ribbon cable

Resources:

• 3D Drawing.STEP
• Camera review and comparison by Jeff Geerling
• Arducam High-Resolution Autofocus Camera (16MP IMX519) for Raspberry Pi Bullseye OS, Cytron tutorial page
• Arducam High-Resolution Autofocus Camera (16MP IMX519) for Raspberry Pi Buster OS, Cytron tutorial page

Using pogo pin connection, the Zero 2W can be easily attached

Onboard 4-ch USB Interface, 100M Ethernet Port and HDMI Port
Note: The Ethernet port does not support PoE function

Easy access to Pi 3B series HATs or other development projects
Note: the height of the GPIO is higher than the Pi 3B / 3B+

Support 3.5mm headphone jack and 4PIN speaker header
When headphone is plugged in, the speaker will be automatically disabled.



Outline dimensions



Resources & Services

Pi-top [4] DIY Edition provides full access to Raspberry Pi's ports and GPIO, and comes with:

• 5-hour internal battery
• Power management system
• Integrated heat sink and cooling fan
• Mini OLED screen and programmable buttons
• Integrated 1-watt loudspeaker

Please Note: You will need the newest version of NOOBS or Raspbian for the Pi4, a USB type C power supply or adapter and a micro HDMI cable or adapter

• Processor: Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• Memory: 2GB, 4GB or 8GB LPDDR4 (depending on model)
• Connectivity: 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless
• LAN, Bluetooth 5.0, BLE Gigabit Ethernet, 2 × USB 3.0 ports, 2 × USB 2.0 ports.
• GPIO: Standard 40-pin GPIO header (fully backwards-compatible with previous boards)
• Video & sound: 2 × micro HDMI ports (up to 4Kp60 supported), 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port, 4-pole stereo audio and composite video port
• Multimedia: H.265 (4Kp60 decode); H.264 (1080p60 decode, 1080p30 encode); OpenGL ES, 3.0 graphics
• SD card support: Micro SD card slot for loading operating system and data storage
• Input power: 5V DC via USB-C connector (minimum 3A1), 5V DC via GPIO header (minimum 3A1)
• Power over Ethernet (PoE)–enabled (requires separate PoE HAT)
• Environment: Operating temperature 0–50oC
• Compliance: For a full list of local and regional product approvals, please visit https://www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md
• Production lifetime: The Raspberry Pi 4 Model B will remain in production until at least January 2026.

• Processor: Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• Memory: 1GB, 2GB or 4GB LPDDR4 (depending on model)
• Connectivity: 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless
• LAN, Bluetooth 5.0, BLE Gigabit Ethernet, 2 × USB 3.0 ports, 2 × USB 2.0 ports.
• GPIO: Standard 40-pin GPIO header (fully backwards-compatible with previous boards)
• Video & sound: 2 × micro HDMI ports (up to 4Kp60 supported), 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port, 4-pole stereo audio and composite video port
• Multimedia: H.265 (4Kp60 decode); H.264 (1080p60 decode, 1080p30 encode); OpenGL ES, 3.0 graphics
• SD card support: Micro SD card slot for loading operating system and data storage
• Input power: 5V DC via USB-C connector (minimum 3A1), 5V DC via GPIO header (minimum 3A1)
• Power over Ethernet (PoE)–enabled (requires separate PoE HAT)
• Environment: Operating temperature 0–50oC
• Compliance: For a full list of local and regional product approvals, please visit https://www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md
• Production lifetime: The Raspberry Pi 4 Model B will remain in production until at least January 2026.

Please Note: You will need the newest version of NOOBS or Raspbian for the Pi4, a USB type C power supply or adapter and a micro HDMI cable or adapter

• Processor: Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• Memory: 2GB, 4GB or 8GB LPDDR4 (depending on model)
• Connectivity: 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless
• LAN, Bluetooth 5.0, BLE Gigabit Ethernet, 2 × USB 3.0 ports, 2 × USB 2.0 ports.
• GPIO: Standard 40-pin GPIO header (fully backwards-compatible with previous boards)
• Video & sound: 2 × micro HDMI ports (up to 4Kp60 supported), 2-lane MIPI DSI display port, 2-lane MIPI CSI camera port, 4-pole stereo audio and composite video port
• Multimedia: H.265 (4Kp60 decode); H.264 (1080p60 decode, 1080p30 encode); OpenGL ES, 3.0 graphics
• SD card support: Micro SD card slot for loading operating system and data storage
• Input power: 5V DC via USB-C connector (minimum 3A1), 5V DC via GPIO header (minimum 3A1)
• Power over Ethernet (PoE)–enabled (requires separate PoE HAT)
• Environment: Operating temperature 0–50oC
• Compliance: For a full list of local and regional product approvals, please visit https://www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md
• Production lifetime: The Raspberry Pi 4 Model B will remain in production until at least January 2026.