Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R299.90  Inc VAT
This brilliant Starter Kit is a perfect starting point to get you up and running with your RPI Zero WH so you can get Playing / Making/ Prototyping etc ASAP.
R689.90  Inc VAT
R724.40
Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.
R139.90  Inc VAT
R1,349.90  Inc VAT
R1,699.90  Inc VAT
Raspberry Pi Zero Wireless WH (Pre-Soldered Header) (ZERO WH board)

The Raspberry Pi Zero WH has landed at PiShop! The Raspberry Pi Zero is an ultra low cost and ultra small variant of the original Raspberry Pi. It's tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi based tinkering you can think of, on a micro scale! The Raspberry Pi Zero Wireless features on board Wireless Internet & Bluetooth for all your connectivity needs!

The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there's plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B+/A+, with a pre-soldered male header. With it's small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!

Unlike it's larger brothers and sisters, the Raspberry Pi Zero has an unpopulated composite (RCA) header and an unpopulated reset header. There's also no DSI screen port, no ethernet, no analogue audio and no full sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video. 

HAT Compatibility Note: The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+

Raspberry Pi Zero Wireless Features:

  • BCM2835 chipset, Overclocked to 1Ghz 
  • 512MB RAM
  • Tiny Form Factor: 65mm x 30mm x 5mm
  • Fully HAT compatible
  • 40pin GPIO with pre-soldered header
  • Stream and watch Hi-definition video output at 1080P
  • Micro SD Slot for OS 
  • Tiny Current Draw ~ 140mA at 5V!
  • Mini-HDMI for Video
  • Micro-USB OTG Host for Data
  • Micro-USB for Power
  • Micro-CSI Camera Port
  • On-Board WiFi
  • On-Board Bluetooth

Raspberry Pi Operating System Downloads: https://www.raspberrypi.org/downloads/
Getting Started with Raspberry Pi

This is the Raspberry Pi board only. You will need a Power Supply, micro SD, HDMI Cable, Display, Input devices and Case as well
R299.90  Inc VAT
Raspberry Pi Pico with presoldered headers (RPi Pico with headers)

https://www.raspberrypi.org/blog/raspberry-pi-silicon-pico-now-on-sale/

https://www.raspberrypi.org/products/raspberry-pi-pico/

https://www.youtube.com/watch?v=ZY-HrRGCQ4w

Add wifi to Pico using Cricket
https://www.thingsonedge.com/post/pico-cricket-blynk-phone-alerts

YouTube video on Pico by Jeff Geerling

Raspberry Pi Pico, a microcontroller board built on silicon designed here at Raspberry Pi.

Whether you choose to use our C/C++ SDK, or the official MicroPython port, everything you need to get started is here. You’ll also find links to the technical documentation for both the Raspberry Pi Pico microcontroller board and our RP2040 microcontroller chip.



Board Specifications

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264kB of SRAM, and 2MB of on-board Flash memory
  • Castellated module allows soldering direct to carrier boards
  • USB 1.1 Host and Device support
  • Low-power sleep and dormant modes
  • Drag & drop programming using mass storage over USB
  • 26 multi-function GPIO pins
  • 2×SPI, 2×I2C, 2×UART, 3×12-bit ADC, 16×controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating point libraries on-chip
  • 8×Programmable IO (PIO) state machines for custom peripheral support


Download Pinout Diagram


Documentation

Documentation for the Raspberry Pi Pico board and the RP2040 microcontroller:

The API level Doxygen documentation for the Raspberry Pi Pico C/C++ SDK is available as a micro-site.

While Raspberry Pi Pico does not come with anything soldered to its pads, we will recommend that users fit 2.54mm pitch male pin strip headers.


R149.90  Inc VAT
Raspberry Pi Zero WH V1 Essentials Kit(Wireless With Presoldered Header) (zero WH V1 32GB kit)
This brilliant Starter Kit is a perfect starting point to get you up and running with your RPI Zero Wireless H so you can get Playing / Making/ Prototyping etc ASAP.

The Kit includes:


Getting Started with Raspberry Pi
This brilliant Starter Kit is a perfect starting point to get you up and running with your RPI Zero WH so you can get Playing / Making/ Prototyping etc ASAP.
R689.90  Inc VAT
R724.40
830 Point Solderless Breadboard (830 breadboard)

Description:

830 solderless point that allows electronic components to be interconnected in an almost endless number of ways to produce working circuits. Compatible with resistors, transistors, diodes, LEDS, capacitors and other types of electronic components. Ideal for experimenting with circuit design for the Raspberry Pi using the GPIO port.

Specifications:

  • Model: MB-102
  • Color: White
  • 830 solderless point

Contents:

  • 1 x 830 Point Solderless Breadboard

Resources:

R79.90  Inc VAT
Solderless 400 Point Breadboard (breadboard 400)

Description:

400 Point solderless breadboard. Perfect for solderless electronic projects.

Specifications:

  • 400 tie points total: 300 tie-point IC-circuit area plus two 50 tie-point distribution strips providing 4 power rails.
  • White ABS plastic body with black printed legend.
  • Color legend on distribution strips.
  • Size: 3.3 x 2.1 x 0.3in (84 x 54.3 x 8.5mm).
  • Peelable adhesive tape backing provided for attaching to a surface.

Contents:

  • 1 x 400 Point Breadboard

Resources:

R38.90  Inc VAT
830 Solderless Breadboard + Power Supply + Jumper Cable Kit (Powered Breadboard kit)
Quick video available on a similar MB-102 power supply at https://www.youtube.com/watch?v=ZpCep1jL-iA

Dimension: 16.7 x 5.7 x 1cm
Tie Points: 830 tie points (consists of: 630 tie-point terminal strips, 200 tie-point distribution strips)
Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Jumper size: Suitable for 20~29 AWG (0.3mm ~ 0.8mm) wires

MB-102 Power Supply Module:

Input voltage: 6.5V ~ 12 V DC / USB power supply
Output voltage: 3.3V / 5V select with jumpers
Maximum output current: <700mA
Fluctuation two road independent control, can switch over to 0V, 3.3V, 5V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use
Size: 5.3 x 3.2 x 2.5cm

Jumper Cables:

Breadboard jumper cable male to male
Typically used for electronics projects
Wires are flexible, durable, reusable, easy to trace
Easy to connect and disconnect

Kit includes:

1 x 830 tie point Solderless Breadboard
1 x MB-102 Breadboard Power Supply
65 x Breadboard Jumper Cables male to male
R129.90  Inc VAT
Helping Hand Clamp Tool with Magnifier (Helping Hand Clamp)
Features:
 
A practical tool for soldering work, electronics and model making.
Heavy and sturdy cast-iron base prevents movement of work.
Two adjustable locking arms with alligator clip jaws and magnifying glass can be configured in many ways.
Magnifier improves field of vision for small objects.

Specifications:

 
Color: Silver+Black
Material: Metal+Glass
Diameter: 60mm
Size: about 154 x 100 x 125mm
 
Package Includes:
 
1 x Third Hand Magnifying Tool
R209.90  Inc VAT
GPIO Hammer Header Jig Kit(Solderless) (hammer header jig kit)

Raspberry Pi Zero not included!

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.

Male + Female + Installation Jig

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the job. They come in male and female flavours, and use crafty little retaining nubbins to grip tightly into the holes on the PCB.

The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two nylon bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read our guide for fitting hammer headers.

We strongly recommend using our installation jig! If you want to try without it then godspeed to you but it is a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig.

Please note: we can't be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow our guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead!

Loose Male hammer headers are also available.

Tutorial on using the jig

Watch our demo of how to fit the hammer headers on Bilge Tank, below.

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.
R139.90  Inc VAT
5.5 x 2.1mm DC Male Solder Barrel Connector jack (DIY male barrel connector)
Specifications:
BrandExcellway®
ModelJP02
MaterialPlastic, Metal
Type5.5mm x 2.1mm Male
Outside Diameter5.5mm
Inside Diameter2.1mm
Length4.5cm
Operating temperature-50 ~ 65 ℃
Connector Polarity+ inside and outside -
Scope DC power supply security, monitoring equipment, LED lights, Arduino, switches and other devices.


Package includes:
1 x DC Power Jack Connector
R19.90  Inc VAT
Soldering Iron 1230 25W 220V (Magnum solder 1230 hand)
The Soldering Iron 1230 is the perfect iron for hobbiests, DIY home makers or someone who only has an occasional use for a Soldering Iron. The 1230 plugs straight into the wall, requiring no workstation at all. Soldering has never been so simple.

  • 220v 25w Thermally balanced soldering iron.
  • Temperature at rest ± 400 °C
  • Stainless steel element and barrel.
  • Long life iron-plated tips.
  • Support stand.
  • Plugs into any 220v AC power source.

Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R469.90  Inc VAT
Magnum Soldering Iron Stand (Magnum solder iron stand)

A much needed accessory for the entire range of Magnum Soldering Irons and Soldering Stations.

This Magnum cast iron soldering spring stand allows for a clean, safe and organised work surface. Included with a cellulose sponge.


Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering

R189.90  Inc VAT
Magnum SM100002 / EW-301 solder tip 0.8mm (Magnum EW-301tip)
Compatible with the following Magnum Soldering Irons: 1002, 1002 80w, 1220, 1012, 1230, 1000sp



Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R99.90  Inc VAT
Soldering Station SM2000 50W (Magnum station 2000)
The Soldering Station 2000 comes standard with the Soldering Iron 1000sp. They have been designed to operate together.

  • General purpose 24vAC 50w transformer station.
  • Safety-spring holder.
  • Cleaning sponge.
  • Spare tip storage.
  • Potential balance socket.
  • Supplied with standard SM100003 tip (EW-303)


Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R1,349.90  Inc VAT
Solder Iron Tip Steel Cleaning Wire Ball (Solder clean ball)
Features :

1. Made of high quality material, reliable in performance
2. Easy to clean soldering head without water
3. Remove residues quickly and effectively
4. It does not damage soldering head
5. Durable for long use
6. Avoid soldering tin from splashing everywhere

Specifications :

1. Material : Steel
2. Smokeless : Yes
3. Non-toxic : Yes

Package includes :

1 x Soldering Iron Tip Cleaner Ball


Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R39.90  Inc VAT
1.0mm solder wire (lead free SN99.3 CU0.7)solder tin tube (Solder wire tube)
Specifications :

Tube Soldering Wire
LEAD FREE SN99.3 CU0.7
Length: 3 meter
Diameter: 1.0 mm
Net weight: 10g (appox.)
Great For Electronics and Electrical Wiring

Package includes :

1 x solder tube


Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R44.90  Inc VAT
Soldering Station SM2002 50W (Magnum station 2002)
    • Stepless temperature selection between 150°C & 450°C (302°F & 842°F)
    • Thermocouple sensing to maintain tip temperature within ± 5°C of selected temperature.
    • Electronic proportional control varies the heating period as required to maintain set temperature.
    • Heating pulse indicator.
    • Units earthed with potential balance socket.
    • Triac switching at zero-crossover point.
    • Robust ABS cabinet.
    • Illuminated rocker switch.
    • Safety-spring holder.
    • Cleaning sponge.
    • Spare tip storage.
    • Potential balance socket.
    • Supplied with standard SM100003 tip (EW-303)

Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering

Input220/240v 50/60Hz external 500mA fuse  
Output24v AC 2A  (50W model)
SizeL200mm W120mm H110mm  (without spring holder)
Weight1,8Kg
R1,699.90  Inc VAT
MS Flux PEN for DIY Solar cell Panels and soldering projects (Misol flux pen)

Description:

  • No-Clean Flux
  • Net volume: 10ml
  • Shelf life @ 25 degree C: 2 year
  • Push the pen tip to start the flux flow
  • Keep the pen cap on when not in use

Warning:

  • When coming into contact with skin, please wash the area immediately to avoid skin irritation.
  • Do not consume.
  • Please store in a safe location where children can not reach it.


Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R49.90  Inc VAT
2.0mm 0.75m Desoldering Braided Solder Remover Wick (2mm desolder wick)
Please Note:   The packaging claims it is 1.5m, but actually it is 0.75m.

Type : CP-2015
Length : 0.75M
Width : 2.0mm

How to use :

1.Place the desoldering wick over the solder to be removed,then put the heated soldering iron tip onto the desoldering wick.The solder will be absorbed.
2.Remove the desoldering wick after the solder has been absorbed.
3.Cut off the used section of the wick using nippers.
4.Repeat steps 1,2 and 3 if the solder is not removed completely.
Absorption may differ depending on the type of solder.Sn63% and 60% (tin content) have good absorption ability.

Package Includes :
 
1 x 2.0mm 0.75m Desoldering Wick CP-2015

Resources:
How to desolder
R26.90  Inc VAT
Magnum SM100008 / EW-307 solder tip 3.2mm (Magnum EW-307 tip)
Compatible with the following Magnum Soldering Irons: 1002, 1002 80w, 1220, 1012, 1230, 1000sp


Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
R99.90  Inc VAT
Rear Bike Light Project Kit (KT bike kit)
Product Description

This easy build bike light kit has just ten parts, making it a good introduction to electronics. The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light. Making it ideal for use as a rear bike light.

Alternatively it can be used as a night safety product or flashing eyes.

Features:

  • Easy build kit making a great introduction to electronics.
  • Great visibility for night time safety.

Contents:

  • 1 x 2xAA Battery Cage with Leads.
  • 2 x 470K Resistor.
  • 1 x 33R Resistor.
  • 2 x Capacitor, Electrolytic, 16V, 10uF.
  • 2 x BC547 NPN Transistor.
  • 2 x Red 5mm Water Clear LED - 30deg - 1000mCd.

Dimensions:

  • Length: 48.5mm.
  • Width: 25.5mm.

Requires:


Resources:


This easy build bike light kit has just ten parts, making it a good introduction to electronics. The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light. Making it ideal for use as a rear bike light.

Alternatively it can be used as a night safety product or flashing eyes.

Caution:

  • This is an educational kit and should be used in conjunction with a commercially available bike light.
R59.90  Inc VAT
Per Page      1 - 20 of 35