Search
Search Criteria
Products meeting the search criteria
Arduino compatible R3 Mega2560 ATmega2560-16AU control board with USB cable
Arduino Mega is an ATmega2560 core microcontroller development board. Itself has 54 digital input/output terminals (14 PWM outputs), 16 simulation inputs, 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writers. Supply part of the optional USB power, or external power using a AC-to-DC adapter and battery.
Rapid growth due to open original code, as well as the concept of using Java (cross-platform) C language development environment for Arduino module. The Arduino can easily use the Arduino language with Flash or Processing ... software communication, to make multimedia interactive works. Arduino development IDE interface is based on open-source principles, allows you to download for use in projects.
Power supply design:
There are two options for the power supply system of the Arduino Mega. USB direct power supply or external power supply. The power supply will be switched automatically. External supply AC-to-DC adapter or the battery can be selected on this control panel. Limit the voltage range of 6V ~~ 12V, but if the voltage supplied is less than 6V, I / O port may not be supplied to a voltage of 5V, and therefore not stable; If the voltage is greater than 12V, the regulator device may possibly overheat and damage the Arduino MEGA. It is therefore recommended that for the operating supply of 6.5 ~ 12V, the recommended power supply is 7.5V or 9V.
The development board have been rigorously tested at the factory.
Specification:
Microcontroller: ATmega2560
Operating voltage: 5V
Input voltage (recommended): 7-12V
Digital I/O pins: 54 (of which 14 provide PWM output)
Analog input pins: 16
DC current per I/O pin: 40 mA
DC current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 4 KB is used by the bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16MHz
Getting started with Arduino products
Package includes:
1 x Control board
1 x USB cable
The Official Raspberry Pi Mouse is finally here!
This sleek, stylish and ergonomic mouse from the team at Raspberry Pi includes three buttons, two main ones for right and left click, and a scroll wheel with button for scrolling. . . and more clicking. . . what more do you need from a mouse!
Mouse Specification:
- Three-button optical mouse
- Scroll wheel
- USB type-A connector
- Compatible with all Raspberry Pi products
- Ergonomic design for comfortable use
- Available in Red/White and Black/Grey
- This mouse will look great with your Red/White official keyboard
The Official Raspberry Pi Mouse is finally here!
This sleek, stylish and ergonomic mouse from the team at Raspberry Pi includes three buttons, two main ones for right and left click, and a scroll wheel with button for scrolling. . . and more clicking. . . what more do you need from a mouse!
Mouse Specification:
- Three-button optical mouse
- Scroll wheel
- USB type-A connector
- Compatible with all Raspberry Pi products
- Ergonomic design for comfortable use
- Available in Black/Grey and Red/White

The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.
If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/usb-type-c-female-to-micro-usb-male-adapter
Specifications
Output
- Output voltage: +5.1V DC
- Minimum load current: 0A
- Nominal load current: 3.0A
- Maximum power: 15.3W
- Load regulation: ±5%
- Line regulation: ±2%
- Ripple & noise: 120mVp-p
- Rise time: 100ms maximum to regulation limits for DC outputs
- Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
- Protection: Short circuit protection, Overcurrent protection, Over temperature protection
- Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
- Output cable: 1.5m 18AWG
- Output connector: USB Type-C
Input
- Voltage range: 100-240Vac (rated)
- 96-264Vac (operating)
- Frequency: 50/60Hz ±3Hz
- Current: 0.5A maximum
- Power consumption (no load): 0.075W maximum
- Inrush current: No damage shall occur and the input fuse shall not blow
UL94V-1
AC pin material
Brass (NI plated)
WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
You'll need a USB Type C adapter to use this supply for Pi 4
The Official Raspberry Pi Power Supply - Shipped with easily interchangeable heads for the UK, US, EU and Australia you can now use your Pi in all four corners of the world!
This PSU supports up to 2.5A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 3 Model B
Technical Data
- 5.1V 2.5A Output
- 1.5m Cable
- White with Raspberry Pi Logo
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 90V
- Output Connector: USB Micro
- Output Voltage Nom.: 5.1V
- Interchangeable Adaptor - EU/UK/US/AUS
The below is a copy from https://www.raspberrypi.org/help/faqs/#powerReqs.Here is a table comparing the amount of power drawn in amps under different situations:
Test conditions used a standard Raspbian image (current as of 26 Feb 2016),Pi1 (B+) Pi2 B Pi3 B (Amps) Zero (Amps) Boot Max 0.26 0.40 0.75 0.20 Avg 0.22 0.22 0.35 0.15 Idle Avg 0.20 0.22 0.30 0.10 Video playback (H.264) Max 0.30 0.36 0.55 0.23 Avg 0.22 0.28 0.33 0.16 Stress Max 0.35 0.82 1.34 0.35 Avg 0.32 0.75 0.85 0.23
Color | Black |
Material | ABS |
Power Supply | Car Cigarette Lighter Plug |
Compatible Models | Mobile phones, tablet PC etc. |
Input Voltage | 12 V |
Output Voltage | 5V |
Output Current | 1000, 2100 mA |
Features | Dual USB output can charge two devices at the same time |
Packing List | 1 x Car charger |
Description:
The USB to Micro USB Cable is 1.5m long and has been tested for compatibility with the Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.
Specifications:
- Tested for Compatibility with the Raspberry Pi
- 26AWG (Up to 2A)
- 1.5m Long
- Colour: Black
- Connector Type A: USB
- Connector Type B: Micro USB
Contents:
- 1 x USB A male to USB micro B male 1.5m
Description:
MODULAR CASE NOT INCLUDED
The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.
The USB/HDMI security cover is a dual-use shroud that can be utilised to protect access to all the external inputs and outputs. Two covers can be used simultaneously if only very limited access is required, and “punch-out” access hatches are available for both the Ethernet and Micro USB power port if these inputs are required. Security covers are tamperproof and can only be removed from inside the case.
In addition to protecting the Raspberry Pi ports, the shroud is offset from the body by 12mm. The enables the secure, internal and protected use of up to four nano USB dongles with the cover installed.
Specifications:
- Dual-Use - Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
- Secure and Tamper-Proof
- RJ45 & Micro USB Power Breakout Hatches
- Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
Contents:
- 1 x USB/HDMI Cover
What else do I need?:
Specification
1.USB 2.0 specification
2.Connector: USB 2.0-A male > USB 2.0-B male
3.Cable length: 1.8m
4.For use with Arduino
Need a high quality SD & Micro SD card reader/writer that can handle SD card sizes up to 512GB? We've found one! The Kawau C296 2 in 1 USB card reader features two slots, one for a standard size SD card, and one for Micro SD cards. It uses USB 2.0, with transfer speeds up to 480Mbps, and it's plug and play! A lot of cheaper SD card readers will not read cards above 32GB (or even 16GB on some of the really cheap ones), but never fear! You can now future proof your SD card library, safe in the knowledge that your Kawau SD card reader can take cards up to 512GB's!
Supports SD, SDHC, SDXC, MMC, Exteme SD, Mini SD, Micro SD, Micro SDXC, Micro SDHC Memory Cards, in addition to the latest format UHS cards.
Technical Details
- Brand: Kawau
- Model: C296
-
Compatible Cards:
- SD
- SDHC
- SDXC
- MMC
- Extreme SD
- Mini SD
- Micro SD
- Micro SDXC
- Micro SDHC
- UHS
-
Supports Card Sizes:
- 4GB
- 8GB
- 16GB
- 32GB
- 64GB
- 128GB
- 256GB
- 512GB
- Colour: Black
- Blue Transfer Light
- Supports up to 512GB
- Size: 60 x 17 x 8.5 mm
- Weight: 16.05 g
The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.
- Dual-Use - Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
- Secure and Tamper-Proof
- RJ45 & Micro USB Power Breakout Hatches
- Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
Use the USB Charger Doctor to measure the working voltage and current output for any USB port and project. This plastic dongle plugs between a USB device, and passes the data lines through. There's a 0.05 ohm resistor in line with the power pin that is used to measure current draw. The Doctor's digital display instantly reads the numbers out for testing devices such as chargers, cables, and cell phones.
You can use this device from 3.5-7VDC input voltage (although most USB devices tend to hover around 4.75 to 5.25) and up to 3A of current. It displays both voltage and current readouts. It's a very handy tool for testing USB devices, checking load levels and debugging battery chargers and boost converters.
Each encoder can support one joystick.
Use them to DIY your own Arcade game machine.
The Zero Delay USB Arcade Encoder is a fully compatible plug and play solution, simply plug in your joystick and buttons into the encoder, plug the USB cable into the Pi, map your buttons in RetroPi and away you go - it really is that easy! You can use multiple encoders at the same time, so they're great for multiplayer arcade machines!
Joystick Size: Approx. 95x60x100mm
Encoder Board Size: Approx. 85x35mm
USB Cable Length: Approx. 1.8m
Colour: Red
We have tested this unit on Raspberry Pi using Retropie and a Windows 7 PC using MAME.
This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. It's short (50cm between connectors), so perfect for mounting your Raspberry Pi, Beagle Bone, Arduino etc. into a box!
The jack half has two mounting 'ears' with M3 screws installed, 8mm apart. The ears are flexible so the holes don't have to drilled very precisely.
Our Panel Mount USB Cable Features:
- Specially Manufactured for ModMyPi for use with the Raspberry Pi & Other Microcontrollers
- Length between connectors: 50cm
- Colour: Black
- 28AWG
- USB A Male to Panel Mount USB A Female
- M3 Mounting Ears
It's a compact wired USB keyboard at an excellent price! This one connects directly to the Raspberry Pi USB ports, and has been tested to make sure it's fully compatible!
We've chosen a high quality, low profile version which accentuates a soft touch and tactile feedback for comfortable typing.
- Compact UK layout keyboard
- USB connection with 1.5 Metre cable
- Tested for compatibility with the Raspberry Pi
- Number Lock and Caps Lock Lock Indication Lights
- Low Profile Tactile Keys for Typing Comfort
- CE, FCC and RoHS Compliant
- Comes Retail Packaged
- Non-slip Rubber Feet Pre-Assembled
Specification:
Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your projects
Black cable-----GND
Green cable----TXD
White cable----RXD
Red cable ---- VCC (5V)
Package includes:
1 x USB to RS232/TTL PL2303HX cable adapter module
Get your retro on with the Raspberry Pi compatible SNES style USB gamepad! This is not an official Nintendo product, but a 3rd party USB type replica of the Super Nintendo/Famicom unit produced in the early 90's!
We tested quite a few from different suppliers, and these were the best - with nice snappy, clicky buttons, and the traditional blue, red, green, yellow layout.
Features:
- USB Connector
- Raspberry Pi Compatible
- D-Pad
- Buttons: Start, Select, X, Y, A, B, R, L
- Cable Length: 1.4m
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port so you can plug in your mouse, keyboard or any other required peripherals! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client (slave) device! This one's in white!
Features:
- Micro USB B (Male) to USB A (Female)
- OTG On-The-Go Host Cable
- CE and ROHS Compliant
- For the Raspberry Pi Zero
RASPBERRY PI ZERO NOT INCLUDED
This solderless serial adaptor for the Pi Zero adds a micro USB port to the Pi's GPIO for serial connections! The board uses an FTDI FT234X IC, and Virtual COM port (VCP) drivers are available for many operating systems on the FTDI website.
Using solderless pins, the adapter slides onto the back of a Pi Zero GPIO with no soldering, but if a permanent connection is required, the adapter can still be soldered to the GPIO header.
The adapter PCB is printed with an alignment guide: Ensure the white SQUARE on the PCB is aligned with the GPIO pin with the SQUARE gold pad on the Pi Zero GPIO pin 1. It's advised to connect the adapter to the Pi Zero before connecting the USB cable to the adapter, to prevent the serial RX/TX pins being connected before the ground pin. Once connected the Pi Zero can be powered on/off without issue.
When using with the Cluster HAT you will need to cut the pins down so only a few millimeters stick through the Pi Zero and then file the ends round otherwise the adapter will short on the back of an adjacent Pi Zero. With use the pins may become worn and need adjustment to keep in good contact with the Pi Zero GPIO header.