Mecer
Features
- Mecer Optical Wheel Mouse : USB
- Ergonomic design
- Light
What's in the box?
1 x USB optical Mouse
- High performance intelligent multi-frequency scanning use active matrix Thin film transistor liquid crystal display (TFT), LED backlight
- Comply with VESA DPMS International Power Saving Regulation
- Support DDC 1/2B and Windows PNP Plug & Play
- Microprocessor based with OSD (On Screen Display) control, able to adjust the image to optimum
- Complying with International Standard (VESA) to mount the display on the wall
- 19.5" (49.53cm) 16:9 wide LED
- Resolution 1600x900@60Hz
- Brightness 250cd/m²
- Viewing Angle 90°/65°(H/V)
- Net weight 2.14kgs
- Gross weight 3kgs
- Ultra slim
What's in the box?
1x LED monitor (with pedestal)
1x VGA signal cable
1x Audio cable
1x Power cord cable
1x User manual
There are a lot of people, even experienced computer users, who use a mouse without a mouse pad, but if you care about your mouse (and whatever's underneath it), you should put a pad between them.
Mecer mouse pad for optical mouse
Mecer 850VA OFF-LINE UPS (with AVR,Monitoring Software Cable & Built-in Surge Protection) - Black
Features:
- 850VA line interactive UPS
- Microprocessor control guarantees high reliability
- Boost and buck AVR for voltage stabilization
- Auto restart while AC is recovering
- Simulated sine wave
- Off-mode charging
- Cold start function
- USB communication port and RJ-11/RJ-45 protection
- Overload, discharge, and overcharge protection
Output:
- AC Voltage Regulation(Batt. Mode): ±10%
- Frequency Range (Batt.Mode): 50Hz or 60Hz ± 1 Hz
- Transfer Time: Typical 2-6 ms, 10 ms max
- Waveform (Batt. Mode): Simulated Sine Wave
Alarm:
- Battery Mode: Sounding every 10 seconds
- Low Battery: Sounding every second
- Overload: Sounding every 0.5 second
- Fault: Continuously sounding
Includes:
- 1x UPS Unit
- 2x Male to Female Extension Power Cord IEC C13-C14 Serial (From UPS to PC)
- 1x USB cable (From UPS to PC)
Specifications:
- Dimensions: 397 x 146 x205
- Weight: 11.5kg
NO Dedicated Power cord with kettle plug (sold separately)
Please Note:
A UPS is not designed to provide continuous power, merely a window period that allows a computer or other user to finalise the work at hand and shut down. It's ability to do this is dependent on the number of devices connected to the UPS.
To establish what you can and cannot connect, calculate the total wattage you need to supply and ensure that the UPS you purchase meets that requirement.
What's in the box?
1 x Mecer 2KVA UPS
2 x Mate to Female Extension Cables
1 x Software Disk
1 x USB Cable
1 x User Manual
Mecer UPS-5200 7.4V 5200MAh Lithium Battery Online UPS.
For WiFi Router and ONT.
With 2 way DC connector split, Autostart when plugged in.
Multi-colour indicator, Built-In Li-ion battery.
Technical Specifications
- Built-in Li-ion battery
- Microprocessor control guarantees high reliability
- Manual power off switch
- Auto start when plugged in
- Multi-color indicator
- Overload, short-circuit, over-charge, and over-discharge protection
Dimensions(LxWxH) mm
160 x 194 x 75 mm
What's in the box?
1 x Mecer DC UPS-5200 Lithium Battery On-line UPS
1 x Power Cord
1 x Pack of six connector types
Brand: Mecer - brand may vary
Item model number: M.2-256G-NVMe
Product Type: Solid State Drive
Capacity: 256GB
Using the Pimoroni NVMe board and Geoff Geerling's settings, we manage to get the below results on Raspberry Pi 5 8GB:
Write: 780MB/s
Read: 800MB/s
*Note: 1GB = 1 billion bytes. Actual useable capacity may vary.
**Speeds based on internal testing. Actual performance may vary.
What's in the box?
1 x M.2 NVMe SSD
You might also need a NVMe drive. Make sure you choose one that fits your NVMe board.
- 1