3D Print Treatment

3D Print treatment related items
Sort By:  
XTC-3D 680g protective coating for smoothing and finishing 3D printed parts (WH XTC 3D 680g)

Description

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

How To

Features

Inexpensive to Use – 1 oz covers 100+ square inches (see coverage information below).

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface - XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC’s, phthalates or phosphates.

Pack Size

680g

Need more info? You can watch MatterHackers video at https://www.youtube.com/watch?v=ChkHuFU90WE



R457.90  Inc VAT
1K EASY SPRAY FILLER (WH print spray filler)

Description

1K Easy filler is a high build primer.It is a modern 1K acrylic filler with high filling properties and coverage. We achieved very promising results to fill up build lines on 3D prints. Sanding may be required between layers.

R319.90  Inc VAT
XTC-3D 180g protective coating for smoothing and finishing 3D printed parts (WH XTC 3D 180g)

Description

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

How To

Features

Inexpensive to Use – 1 oz covers 100+ square inches (see coverage information below).

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface - XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC’s, phthalates or phosphates.

Pack Size

180g

Need more info? You can watch MatterHackers video at https://www.youtube.com/watch?v=ChkHuFU90WE


R199.90  Inc VAT
Non-toxic Washable Glue Stick For 3D Printer Hotbed 21g 24x98mm (3D6 3D bed glue stick 21g)
Model : Glue Stick
    Weight: 21g
    Size: 24mm  x 98mm

  •     Great for use on your 3D printer hotbed
  •     Washable
  •     Non-toxic for environmental protection
R44.90  Inc VAT
Per Page      1 - 4 of 4
  • 1