3D Printer Filament
Thermoplastic polyurethane (TPU) belongs to a class of polyurethane plastics having many important properties such as elasticity, transparency, and resistance to grease, oil, and abrasion. It is unique due to its extremely flexible nature. Technically speaking, TPUs are made up of thermoplastic elastomers.
TPU has different advantages such as resistance to abrasion, ability to perform at low temperature, elasticity, and mechanical properties along with rubber-like elasticity.
TPU printing filament is flexible in nature. It can bend easily without any effect on the design, strength and durability. A mild soap can be used for its cleaning.
Flexible TPU filaments can be stored in a cool airtight container. Container may also have a desiccant pack, so that filament remains bone dry. This container can also help in preventing the entry of dirt and dust particles, so that the filament could be used anytime for print. Although some type of TPUs are water-resistant, prolonged contact with water could result in degradation of the product.
For optimal results print flexible TPU filaments on direct extruders; however, it is possible to print on Bowden extruders as well. Flexible TPU filaments have the ability to adhere well to most surfaces such as glass, aluminum, Kapton tape, and blue painters tape. It is important to always print in a well ventilated room regardless of the filament type.
The DaVinci Lab flexible (TPU) filament has the following characteristics:
- Consistent color
- 0.8Kg net weight
- Print Temperature: 200 – 230°C
- Heat Bed temperature: 50 – 80°C
- Print Speed: 30 – 50mm/s
- Accurate diameter of 1.75mm +-0.05mm
- Vacuumed Sealed With Desiccant
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Enclosure is recommended
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Enclosure is recommended
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Enclosure is recommended
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Enclosure is recommended
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Enclosure is recommended
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
Enclosure is recommended
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
Thermoplastic polyurethane (TPU) belongs to a class of polyurethane plastics having many important properties such as elasticity, transparency, and resistance to grease, oil, and abrasion. It is unique due to its extremely flexible nature. Technically speaking, TPUs are made up of thermoplastic elastomers.
TPU has different advantages such as resistance to abrasion, ability to perform at low temperature, elasticity, and mechanical properties along with rubber-like elasticity.
TPU printing filament is flexible in nature. It can bend easily without any effect on the design, strength and durability. A mild soap can be used for its cleaning.
Flexible TPU filaments can be stored in a cool airtight container. Container may also have a desiccant pack, so that filament remains bone dry. This container can also help in preventing the entry of dirt and dust particles, so that the filament could be used anytime for print. Although some type of TPUs are water-resistant, prolonged contact with water could result in degradation of the product.
For optimal results print flexible TPU filaments on direct extruders; however, it is possible to print on Bowden extruders as well. Flexible TPU filaments have the ability to adhere well to most surfaces such as glass, aluminum, Kapton tape, and blue painters tape. It is important to always print in a well ventilated room regardless of the filament type.
The DaVinci Lab flexible (TPU) filament has the following characteristics:
- Consistent color
- 0.8Kg net weight
- Print Temperature: 200 – 230°C
- Heat Bed temperature: 50 – 80°C
- Print Speed: 30 – 50mm/s
- Accurate diameter of 1.75mm +-0.05mm
- Vacuumed Sealed With Desiccant
Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips