52Pi
Please Note: Raspberry Pi is not included. Picture is for illustration purpose only
Meet this super ICE Tower CPU Cooling Fan for Raspberry Pi! Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 48℃. What amazing! Best of all, this cooling fan supports the new Raspberry Pi 4 Model B. In our actual use, we found that Raspberry Pi 4 has a large amount of heat. with the help of this super fan, the powerful performance of the Raspberry Pi 4 will be fully released.
Please Note
In the heat dissipation test mentioned above, the temperature was lowered from 80 ° C to 40 ° C. The test conditions are as follows: 1-Room temperature 25 ° C / 2- Apply silicone grease directly to the heat sink and processor chip / 3- Raspberry Pi 4 processor
If you use the thermal conductive tape included, you can reduce the temperature from 80 ° C to 48 ° C under the same conditions. It can be seen that the use of silicone grease is better. If you want to achieve the best heat dissipation, we recommend that you purchase silicone grease.
Video available at https://youtu.be/l5IFD2wq_gA
Features
- Support Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B /Raspberry Pi 3 Model B
- DC 5V Power in (Can be powered by the Raspberry Pi)
- Ice Tower Structure
- 5mm copper tube
- Super heat dissipation
- Rated power 0.4W @5V, 0.08A
What's in the box?
2 x Steel Mounting Fixer (Fit for Raspberry Pi 4B)
1 x Ice tower CPU fan
4 x M2.5x6 copper columns
2 x M2x4 screws
4 x M2.5x4 screws
4 x Nuts
3 x Thermal Conductive Tape
1 x Screwdriver
Ultra Thin, Tower-style, Speed-Adjustable Fan
for reference only, Raspberry Pi4 is NOT included.
| Supported Pi | Raspberry Pi 4B |
|---|---|
| Power supply | DC 5V input (can be powered from Raspberry Pi) |
| structure | ICE Tower-style, 3x4.5mm copper tube super heat dissipation |
| rated power | 0.6W @5V, 0.12A |
| Fan | 4007 fan, 5300±10% RPM |
Female pinheader and FAN adapter V2 are available to facilitate expansion modules(Included)
for reference only, Raspberry Pi 4B and RS485 CAN HAT (B) are NOT included.
With the same cooling effect, the size is thinner and lighter than
ICE Tower Fan for Pi and ICE Tower Fan V2 for Pi
PWM Speed-Adjustable Fan and 3x4.5mm Copper Heat tube, provide effectively excellent heat dissipation
Maintain CPU Temperature Below 45°C Even In Extreme Overclocking Conditions
How to install (The fan adapter is included with this product)
What's in the box?
1 x PI4-ICE-TOWER-FAN
1 xFAN Adapter V2
1 x 2x20PIN female pinheader
1 x 2x2PIN female pinheader
1 x Acrylic bottom panel
1 x Screwdriver
1 x Silicone thermal tape and Screws pack
Extreme heat dissipation
Easy to assemble
What's in the box?
1 x ICE Tower cooling with fan
The Jetson Nano is not included!
Resources
Specs and Instructions
Specifications
- SUPPORTED PI: Raspberry Pi 5
- POWER SUPPLY: DC 5V input (can be powered from Raspberry Pi)
- STRUCTURE: Low-Profile ICE Tower-style, 5mm copper tube super heat dissipation
- RATED POWER: 0.4W @5V, 0.08A
- FAN: Powerful RGB colorful LED fan
Large Area Cooling Fins And Directly-Contacted Copper Tube, Super Heat Dissipation
Reducing The Temperature Of The Raspberry Pi From 80℃ To 40℃ While Overclocking
More Silent
Rated Power 0.4W @5V, 0.08A, Elaborately Tuned Fan
Lower Noise, Higher Performance
What's in the box?
1 x Low-Profile ICE Tower
Resources
* for reference only, the Raspberry Pi 5 and TF card are NOT included.
The Game 5Pi Case from 52Pi is a retro gaming enclosure designed for Raspberry Pi 5, offering a retro aesthetic along with epic cooling capabilities!
The case pays homage to consoles of days gone by with its on-point retro gaming styling, complete with an awesome USB/Ethernet flap cover which we just love!
It's not just a pretty face either - the Game 5Pi gives you convenient access to most ports on your Raspberry Pi 5 (including SD access), along with power button access and even soft rubber feet. Cooling is a key priority too (essential for a retro gaming setup). The case comes with an Armour Lite V5 heatsink/fan for the Pi 5, as well as a case exhaust fan to keep the overall enclosure temperature down.
Combine with our NES-Style USB controllers for the ultimate 'good ol' days' retro gaming machine!
Raspberry Pi 5 not included
Features
- Retro gaming case for Raspberry Pi 5
- Armor Lite V5 included - Optimal thermal dissipation for the Raspberry Pi
- Side fan cooling system - In addition to the main heatsink and fan, the case features a side fan cooling system to further enhance airflow and cooling efficiency
- ABS Material - Constructed from high-quality ABS material
- Compact retro design - Visually appealing while maintaining a smaller footprint
- Movable cover - A movable cover protects the unused USB and Ethernet ports
- Easy Installation - Designed for easy and hassle-free installation
- Compatibility - The Game 5Pi Case is specifically designed for Raspberry Pi 5
What's in the box?
1 x ABS Upper
1 x ABS Lower
1 x Armor Lite V5 heatsink/Fan
6 x Thermal Pads
1 x Screw driver
2 x M2.5 Screw
4 x Self-tapping screw
Raspberry Pi5 not included
Resources
- 1