All Products

Sort By:  
Please note: Pic is for illustration purposes only
R4.90  Inc VAT
R29.90  Inc VAT
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
R29.90  Inc VAT
This is the V2.1 camera. OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
R479.90  Inc VAT
AM2302 DHT22 Temperature And Humidity Sensor Module (DHT22 temp/humid)

Description:

AM2302 Humicap digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor. It uses dedicated digital module capture technology and temperature and humidity sensor technology to ensure that products has high reliability and excellent long-term stability. Sensor includes a capacitive humidity sensing element and a high-precision temperature measurement device, and with a high-performance 8-bit microcontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, low cost and other advantages. Ultra-small size, low power consumption, signal transmission distance up to 20 meters. Making it the best choice for all kinds of applications and even the most demanding applications.

Applications:

HVAC (Heating Ventilation Air Conditioning), dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, home appliances, humidity regulator, medical,weather stations, and other related humidity detection control.

Specification:

Dimensions: 40 x 23mm
Weight: 4g
Voltage: 5V
Port: digital two-way single bus
Temperature range: -40 to 80 °C ± 0.5 °C
Humidity: 20 to 90% RH ± 2% RH
Platform: Arduino, SBC

Package includes:

1 x Sensor Module


How to setup a DHT22 with your Raspberry Pi.The resistor is already on the PCB so you can skip the breadboard part.

R125.90  Inc VAT
FLIRC V2 - RPi USB XBMC IR Remote Receiver (Flirc IR receiver)

Description:

The FLIRC USB dongle allows the use of any remote control with your Raspberry Pi. Configure the device on your desktop PC, then simply plug into your Pi for a perfect media centre companion! Amaze your friends and family when the tiny box stuck to the back of your TV controls your entire media collection using an old DVD remote!

New Flirc Version 2 is smaller, lighter and much more professional!

FLIRC learns from any remote control, not caring about different vendor protocols. Just walk through the super simple setup - pairing individual remote buttons with 'Media Centre Buttons' and you're done. It's basically a universal IR receiver, so can be used with any remote you choose, old, new or Universal! The best part about FLIRC is that it can be used to mimic a keyboard so every media center application understands it without any drivers. You can map all keyboard functions to a remote using FLIRC - it's very cool! FLIRC runs across all platforms including the Raspberry Pi, so you can use it on your PC, laptop or Mac!
 
Tutorials
 
We've written an entire step by step guide for FLIRC which includes:
  • Setting up OSMC (XBMC) media operating system on the Raspberry Pi.
  • Setting up your FLIRC module and porting it to any remote.
  • Putting it all together!
  • More advanced FLIRC programming - porting an entire keyboard to a remote!

R389.90  Inc VAT
12V 1/2" Inlet Feed Water Solenoid Valve N/C (1/2 straight valve)
Description:

Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how?
Well, here’s how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the fluid input then once the 12Vdc is applied the fluid will start to exit until the 12Vdc signal is removed.

If your signal is 5V , then you can use relay 5Vdc to control the 12Vdc from your microcontroller.

Specifications:

Voltage: 12V DC
Rated Power: 5W
Pressure: Max 8 Bar
Operation model: Normally closed
Port Size: 1/2''
Fluid temperature: 0-100
Usage: water and low viscosity fluids
Flow characteristics: 0.2Bar>1.5L/min 1Bar>7L/min 3Bar>12L/min 8Bar>20L/min;

What's in the box?:

1 x Water Solenoid Valve

Please note:

The actual valve size in the unit is smaller than the port size as you will find with most taps.

R249.90  Inc VAT
1N4007 Rectifier Diode 1000V 1A (5 pack) (1N4007 Diode 1A(5 pack))
Please note: Pic is for illustration purposes only

Description:

The 1N4007 is used as a general-purpose diode. It is normally constructed to be used as a rectifier in the power supply section of electronic devices to convert AC voltage to DC voltage with other filter capacitors.

Specifications:

  • 1N4007 Diode
  • rectifying
  • standard 1A 1000V
  • DO-41
What's in the box:

Pack of 5 units
 
Resources:

Intoduction
Basics, Types, Characteristics, Applications & Packages
Please note: Pic is for illustration purposes only
R4.90  Inc VAT
Flat Ribbon Cable 40 Way - 2 Meter lenghts (40 ribbon/2m)
Description:

Looking for a neat way to connect data transmission devices? This 40-way flat ribbon cable is commonly used with computers and audio and digital equipment. It provides a simple solution to mass termination. 

Features:

28 AWG
Extended temperature rating: -20oC to 85oC
Insulation: Polyvinyl chloride (PVC)
Stranded copper wire
Sold Per 2 Meter length

What's in the box?:

2m x Flat Ribbon Cable
R130.72  Inc VAT
Official Raspberry Pi3B and Pi3B Red & White Case (official case Pi3 Red/White)

PLEASE NOTE: Raspberry Pi not included.
Description:


The Official Raspberry Pi 3 Model B Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your RPi 3! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Red and White Colour Combination

  • 5 Part "Snap-Fit" Enclosure

  • Cut-outs for all connection points

  • Micro SD card cut-out

  • Plastic LED light protector

  • Stick on rubber feet for case stability

    R159.90  Inc VAT
    4V to 40V DC to DC Step Down LM2596 Voltage Regulator Converter Module (Green step down LM2596)
    Description:

    The LM2596 is a commonly used popular step-down switching regulator IC. The adjustable version can take in input voltage from 4.5V to 40V and convert it to variable voltage sourcing upto of 3A of continues current. Because of its high current capability is commonly used in power modules to power/control heavy loads

    Specifications:

    Input voltage range: 4-40 v (40 v highest voltage limit)
    Output voltage range:1.25V - 37V (input voltage must 2 V above output)
    Output current: 2 A continuous output
    Output power: maximum 15 w
    Ripple frequency: 150 KHZ
    Grain wave peak: 100 mv


    IN : input positive
    IN - : input negative
    OUT : output positive
    OUT - : output negative


    Voltmeter precision: ± 5 ‰
    Weight: 33g
    Size: 7cm x 4cm

    Package includes:

    LM2596 voltage regulator converter module
    R99.90  Inc VAT
    BMP180 Digital Barometric Pressure Sensor Board Module (Barometric sensor)
    Description:

    This digital barometer has some interesting applications. By measuring the absolute pressure of the environment and converting this into altitude. you will have a reliable sensor for determining the height of your robot, plane or projectile. This sensor is capable of achieving an accuracy of 1m, with noise of only 17cm in ultra-high resolution. The device will operate at only 0.3uA meaning low current draw for battery powered applications.

    Specifications:


    1.8V to 3.6V Supply Voltage
    Low power consumption - 0.5uA at 1Hz
    I2C interface
    Max I2C Speed: 3.5 MHz
    Very low noise - up to 0.02hPa (17cm)
    Fully calibrated
    Pressure Range: 300hPa to 1100hPa ( 9000m to -500m)
    Weight: 1.18g
    Size: 21mm x 18mm

    Package includes:

    1 x BMP180 Digital Barometric Pressure Sensor Board Module
    1 x Male to Male 4 pin header

    Resources:

    Using the BMP180 with Raspberry Pi
    R29.90  Inc VAT
    2M UTP CAT5E Flylead (Lan 2m flylead)
    Pic is for illustration purposes only.

    Description:

    UTP CAT5E flylead cable. UTP Category 5e Flyleads allows for Fast Ethernet and Gigabit computer networks that require Enhanced Category 5 cabling for voice, data and video. 1m in length

    Specifications:
    • 2m
    • UTP
    • CAT5E

    What's in the box?:

    1 x 2M UTP CAT5E Flylead
    R29.90  Inc VAT
    IIC / I2C 1602 Blue Backlight LCD Display Module For Arduino (Blue backlight display)
    Description:

    Comes with an I2C breakout board at the back. This allows you to use only 2 of your controller pins to be able to communicate with your screen, leaving the rest for other things.

    Specifications:

    Power supply voltage: 2.5 - 6V
    Supports I2C
    Blue back light, contrast can be adjusted
    Two line output
    Four wire connection

    Package included:

    1 x LCD Display Module

    Resources:

    Setup Guide
    R75.90  Inc VAT
    Sound Detection Sensor LM393 Chip (sensor sound detection)

    Description:

    LM393 Sound Detection Sensor Module for controller detects whether the sound has exceeded a threshold value. The sound is detected via a microphone and fed into an LM393 op-amp. The sound level setpoint is set via an onboard potentiometer.
    Can be used for Acoustic control light; give sound and light alarm working with Photosensitive sensor
    Note: The Maximum induction distance is 0.5M

    Features: 
    • Main Chip: LM393, Electret condenser microphone
    • Working Voltage: DC 4-6V
    • Signal output indication
    • Single channel signal output
    • The output effective signal is low level
    • When there is sound,output low level and the signal lights
    What's in the box?:

    1 x LM393 Sound Detection Sensor

    Resources:

    Find help with this sensor at https://www.instructables.com/id/Sound-Sensor-Raspberry-Pi/
    R14.90  Inc VAT
    Liquid Water level sensor Side Mounted Float Switch (liquid level side mounted)

    Description:

    The liquid level switch detects the rising level of liquid in a sump or tank. It can be connected to a micro controller. It can then be used to start/stop a pump which then pumps liquid in/out until the level of the liquid has been restored to the point where the pump is switched off again. The switch may be used in a pump station, a sensor, a tank alarm, or other devices.

     

    Specification:

    Contact Rating: 10W
    Switching Voltage: 220V
    Switching Current: 0.5A
    Breakdown Voltage: 220VDC
    Carry Current: 1.0A
    Contact Resistance: 100mohm

    What's in the box:

    1 x Liquid Water level sensor 

    Resources:

    Python library
    Introduction to Buttons and Switches
    Types of buttons and switches

     

    R39.90  Inc VAT
    Raspberry Pi Camera Board Replacement Cable 300mm (Cam cable 300mm)
    Description:

    The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
    Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
    This replacement cable is 300mm long.

    The Raspberry Pi Camera Board Replacement Cable Features:
    • Direct Replacement for the Raspberry Pi Camera Board Cable
    • 300mm Overall Length
    • 1mm Pitch
    • 15 Way Flat Cable
    • Conductor: Tin plated copper
    • Insulation: White PVC
    • Supporting tape: Blue polyester
    • UL rating: UL2896
    • Temperature rating: 80°C
    • Voltage: 30V
    • Flame test: VW-1, FT1, FT2
    • CSA Standard: CAN/CSA-22.2 No.210.2


    What's in the box?:


    1 x Camera Board Replacement Cable
    R26.90  Inc VAT
    L7805CV TO220 5V Voltage Regulator (L7805 Volt Reg)
    Description:

    L7805CV is a three terminal linear voltage regulator IC with a fixed output voltage of 5V which is useful in a wide range of applications.

    A voltage regulator generates a fixed output voltage of a preset magnitude that remains constant regardless of changes to its input voltage or load conditions. 

    Specifications:
    • Integrated circuit
    • Voltage regulator
    • 5V
    • Non insulated

    Resources:
    Understanding How a Voltage Regulator Works


    What's in the box:

    1 x L7805CV 5V regulator
    R5.90  Inc VAT
    Electrolytic Radial Capacitor 1uF 50V (10 pack) (Rad Cap 1uF 50V(10))
    Description:

    Electrolytic Radial Capacitor 1uF 50V. Typically used for surge suppressing / transient voltages / filtering out noise line noise. Rated for 1uF at 50v.


    Specifications:
    • DC Voltage 50V
    • Value 1uF
    • Size 11mm x 5mm
    • Pitch 2mm
    • pack of 10
    What's in the box:

    1 x Electrolytic Radial Capacitor 1uF 50V


    Resources:
    Theory
    Introduction
    Types


    R7.90  Inc VAT
    Potentiometer single turn carbon linear PCB 2K (potentio 2k)
    Description:

    Mainly used to control electrical devices such as volume controls on audio equipment.
    Creates a variable resistance that you can change by turning the knob

    Specifications:
    • Single turn 2K
    • Linear
    • Carbon
    • PCB type
    • 5mm pitch pin
    • Spline shaft
    • 17mm diameter
    • 0.2W
    • Shaft length 10mm
    • Shaft diameter 6mm

    What's in the box?:

    1 x Potentiometer

    Resources:

    Python Library
    Definition, Types, And Working Principle
    R9.90  Inc VAT
    L9110S H Bridge Stepper Motor Dual DC Driver Controller Module (L9110S small H Bridge)

    Description:

    There are two L9110S motor controller chips onboard
    This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor

    Feature:

    Work under low static current
    Power supply voltage: DC 2.5V - 12V
    Each channel has 800mA continuous current output
    Low saturation pressure drop
    TTL / CMOS output level compatible, can be connected directly to the CPU
    Output built-in clamping diode, apply to the perceptual load
    Control and drive integrate in IC
    Pin high pressure protection function
    Working temperature: 0°C - 80°C
    Size: 29 x 21mm(L x W)

    Circuit diagram:

     


    Package includes:

      1x L9110S stepper motor driver

    Robot control with Python

    This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
    R29.90  Inc VAT
    Raspberry Pi Camera Board V2 (8MP,1080p) (RPi Cam 8MP V2)

    How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

    Description:

    The Raspberry Pi Camera Module V2 is the new and improved official camera board from the Raspberry Pi Foundation! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

    The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor. A 150mm CSI cable is included with every camera.

    The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

    The Raspberry Pi Camera Board V2 Features:

    • Fixed focus lens on-board
    • 150mm CSI camera cable included
    • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
    • Supports 1080p30, 720p60 and 640x480p90 video
    • Size 25mm x 23mm x 9mm
    • Weight just over 3g
    • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
    • Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system

    Note: to use the camera with Raspberry Zero, you need to buy a specific cable: Raspberry Pi Zero Camera Cable

    Getting started with PiCamera
    This is the V2.1 camera. OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
    R479.90  Inc VAT
    Raspberry Pi "NoIR" Infrared Camera Board V2 (8MP,1080p) (camera NOIR 8MP)

    How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

    The NoIR Camera V2 is the “night vision” version of the official camera board released by the Raspberry Pi Foundation. The Raspberry Pi NoIR Camera Board V2 has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi  NoIR Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

    The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.

    The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

    The Raspberry Pi NoIR Camera Board V2 Features:

    • No IR Filter - Great for Low Light Conditions
    • Includes Blue Filter
    • Fixed focus lens on-board
    • 150mm CSI camera cable included
    • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
    • Supports 1080p30, 720p60 and 640x480p90 video
    • Size 25mm x 23mm x 9mm
    • Weight just over 3g
    • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
    • NoIR Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system
    Getting started with PiCamera

    Note: to use the camera with Raspberry Zero v1.3, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable
    R499.90  Inc VAT
    Set with 10 cables 42cm 5 colours with booted crocodile clips (croc jumpers set 10)
    Description:

    This bundle contains ten leads with crocodile clips at each end
    Two of each of five colour cords: black, green, red, white and yellow
    The PVC sleeves on the crocodile clips match the colour of the cables

    This bundle is ideal for use with your micro:bit

    Specifications:

    • Material: 304 Stainless Steel.
    • Length: 40 mm.
    • Jaws Open: 6.2 mm.
    • Socket: 2 mm banana plug.


    What's in the box?:

    10 x booted crocodile clips

    R79.90  Inc VAT
    Per Page      141 - 160 of 1246