Da Vinci Lab

Sort By:  
DaVinci Lab Rainbow PLA filament (1.75mm 1Kg) (PLA Da Vinci Rainbow)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

DaVinci Lab PLA based multicolour filament blends different colour slowly in single roll of rainbow filament

  • DaVinci Lab's Rainbow PLA
  • Print temp :- 190 - 220 degrees
  • Heated Bed :- 50 - 60 degrees (optional)
  • Fan :- Yes
  • Speed range :- 50 - 80 mm/s

Printability :- Easy

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips


R499.00  Inc VAT
DaVinci Lab PLA filament (1.75mm 1Kg) Brown (PLA Da Vinci BROWN)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
DaVinci Lab PLA filament (1.75mm 1Kg) Orange (PLA Da Vinci ORANGE)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
DaVinci Lab PLA filament (1.75mm 1Kg) White (PLA Da Vinci WHITE)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
DaVinci Lab ABS filament (1.75mm 1Kg) White (ABS Da Vinci WHITE)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate
Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
DaVinci Lab ABS filament (1.75mm 1Kg) Orange (ABS Da Vinci Orange)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R249.90  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Purple (ABS Da Vinci Purple)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R249.90  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Yellow (ABS Da Vinci Yellow)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R249.90  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Green (ABS Da Vinci Green)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R249.90  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Blue (ABS Da Vinci Blue)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R249.90  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Red (ABS Da Vinci Red)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R249.90  Inc VAT
DaVinci Lab Flexible Filament TPU (1.75mm 0.8Kg) White (PLA flexable white)

Thermoplastic polyurethane (TPU) belongs to a class of polyurethane plastics having many important properties such as elasticity, transparency, and resistance to grease, oil, and abrasion. It is unique due to its extremely flexible nature. Technically speaking, TPUs are made up of thermoplastic elastomers.

TPU has different advantages such as resistance to abrasion, ability to perform at low temperature, elasticity, and mechanical properties along with rubber-like elasticity.

TPU printing filament is flexible in nature. It can bend easily without any effect on the design, strength and durability. A mild soap can be used for its cleaning.

Flexible TPU filaments can be stored in a cool airtight container. Container may also have a desiccant pack, so that filament remains bone dry. This container can also help in preventing the entry of dirt and dust particles, so that the filament could be used anytime for print. Although some type of TPUs are water-resistant, prolonged contact with water could result in degradation of the product.

For optimal results print flexible TPU filaments on direct extruders; however, it is possible to print on Bowden extruders as well. Flexible TPU filaments have the ability to adhere well to most surfaces such as glass, aluminum, Kapton tape, and blue painters tape. It is important to always print in a well ventilated room regardless of the filament type.

 

The DaVinci Lab flexible (TPU) filament has the following characteristics:

  • Consistent color
  • 0.8Kg net weight
  • Print Temperature: 200 – 230°C
  • Heat Bed temperature: 50 – 80°C
  • Print Speed: 30 – 50mm/s
  • Accurate diameter of 1.75mm +-0.05mm
  • Vacuumed Sealed With Desiccant


Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R479.99  Inc VAT
DaVinci Lab Silk PLA filament (1.75mm 1Kg) White (PLA Da Vinci Silk white)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 60mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Please not this is not 100% PLA, it is a PLA with a added composite in to give the print a silky appearance and feel. It prints much like normal PLA however the finished product is tough but is not as brittle as standard pure PLA due to the added composite.

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R380.00  Inc VAT
DaVinci Lab Marble PLA filament (1.75mm 1Kg) (PLA Da Vinci Marble)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Hardened nozzle recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R380.00  Inc VAT
DaVinci Lab PLA filament (1.75mm 1Kg) Silver (PLA Da Vinci SILVER)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
DaVinci Lab PLA filament (1.75mm 1Kg) Grey (PLA Da Vinci GREY)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
DaVinci Lab PETG Filament 1kg (1.75mm) Black (filament PETG black)

The DaVinci Lab PETG 3D printer filament (Polyethylene Terephthalate) is one of the most common used polymers today. It is also used in the manufacture of food packaging, water bottles and many other common plastic items. PETG filament has proven its worth as a durable material that is easy to use. Figuratively speaking, it combines the most useful characteristics of ABS filament with the ease of printing that PLA filament affords.

PETG features:
  • Higher strength
  • Lower shrinkage
  • Combines good strength with ductility, making it a good, tough material for mechanical parts
  • Good chemical resistance
  • Contains UV absorber
  • Good hydrophobicity (does not absorb water easily)

The DaVinci Lab PETG filament has the following characteristics:

  • 100% virgin material without cheap plastic fillers
  • Print Temperature: 210 – 250°C, dependent on printer model
  • Heat Bed temperature: 90 – 110°C
  • 1Kg net weight
  • Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
  • Spool Size: diameter 197mm, inner hub 60mm & height 60mm
  • Vacuumed Sealed With Desiccant
  • ROHS Certification from SGS testing


Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R349.90  Inc VAT
DaVinci Lab PLA filament (1.75mm 1Kg) Pink (PLA Da Vinci PINK)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
DaVinci Lab PLA filament (1.75mm 1Kg) Yellow (PLA Da Vinci YELLOW)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
DaVinci Lab PLA filament (1.75mm 1Kg) Green (PLA Da Vinci GREEN)

DaVinci Lab’s PLA  (Polylactic acid) is a biodegradable and bioactive thermoplastic  aliphatic polyester derived from renewable resources.

  • Davinci Lab PLA
  • Print temp :- 190 - 220 degrees 
  • Heated Bed :- 50 - 60 degrees (optional)
  • Speed range :- 50 - 80mm/s optimal
  • Printability :- Easy
  • Weight: - 1kg

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R225.00  Inc VAT
R249.90
Per Page      1 - 20 of 26