Discontinued

Discontinued items that we no longer stock... give us a shout if you see something you need and we'll see if we are able to restock them. Email [email protected] Please include the link to the item.
Sort By:  
They're the perfect colourful companion for connecting your Raspberry Pi to your HDMI monitor or TV.
R78.90  Inc VAT
The function of a linear guide is to support and guide moving parts.
R341.97  Inc VAT
This bundle includes a specially designed black matte Pi Camera Box Case, a Magnetic Fish-Eye Lens and Camera Box Wall Mount for the Raspberry Pi Model A+
R359.90  Inc VAT
The WD Enclosure Kit for Pi Zero is a great expansion kit to get started with your Pi Zero.
R392.41  Inc VAT
Discontinued: KKSB Raspberry Pi 3 Metal Case - Stainless Steel (AW C4 KKSB case stainless)

The KKSB full metal enclosures are designed to protect your Raspberry Pi's in rugged environments. Designed is Sweden, these cases are compact, robust and clean. It's a case designed for serious users in industrial applications, or those who want an especially good looking case for their Raspberry Pi!

The case is laser cut stainless steel which is then powdercoated, with cut-outs to enable access to all connectors on the Raspberry Pi.

Unlike other metal cases, the KSSB case features a cut-out for the WiFi/Blutooth antenna, which results in minimal signal loss ~ RSSI measured signal reductions around 1-10% compared with a board without case.

This case also includes a side exit slot side for a ribbon cable to be fitted to the board’s 40 pin GPIO header, in addition to a cut-out for the Raspberry Pi camera module. The board is clamped with two hexagonal standoffs and the lid is attached to these standoffs and with countersunk hex screws, leaving a smooth finish.

Dimensions:

Length: 92 mm
Width: 61 mm
Height: 29 mm

R251.18  Inc VAT
Discontinued: HDMI to HDMI Noodle Cable 1.5m - V1.4 (Red) (AW HDMI noodle 1.5m red)

These 1.5m Gold Plated HDMI to HDMI noodle cables are completely flat. They're the perfect colourful companion for connecting your Raspberry Pi to your HDMI monitor or TV. This is the latest high speed version V1.4 with Ethernet, 3D and CEC support! 

1.5m Noodle HDMI to HDMI Cable Specification:

  • Tested for Compatibility with the Raspberry Pi
  • HDMI Male (19 Pin) to HDMI Male (19 Pin)
  • 1.5m Long
  • Flat "Noodle" Type Cable
  • 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
  • Fully CEC, Ethernet and 3D over HDMI enabled (V1.4 Connection)
  • Supports 4K2K, 2160p, 1440p, 1080p, 720p and 480p Resolutions
  • 2 Year Warranty
They're the perfect colourful companion for connecting your Raspberry Pi to your HDMI monitor or TV.
R78.90  Inc VAT
Discontinued: ModMyPi Modular RPi Case - USB/HDMI Cover (Blue (mod hdmi cover blue)
MODULAR CASE NOT INCLUDED

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.
 
The USB/HDMI security cover is a dual-use shroud that can be utilised to protect access to all the external inputs and outputs. Two covers can be used simultaneously if only very limited access is required, and “punch-out” access hatches are available for both the Ethernet and Micro USB power port if these inputs are required. Security covers are tamperproof and can only be removed from inside the case. 
 
In addition to protecting the Raspberry Pi ports, the shroud is offset from the body by 12mm. The enables the secure, internal and protected use of up to four nano USB dongles with the cover installed.
 
USB & HDMI Security Cover Features:
  • Dual-Use - Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
  • Secure and Tamper-Proof
  • RJ45 & Micro USB Power Breakout Hatches
  • Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
R39.34  Inc VAT
Discontinued: Adhesive Aluminum Heat Sink Cooler Kit For Cooling Raspberry Pi (AW C8 heatsink kit aluminium)
Description:

The Heatsink have a layer of adhesive on the back of them.
Simply peel the adhesive off and stick onto your board
This heatsink set is specially designed for Raspberry Pi, it's function is to cool down the board and make your Raspberry operate safely
Reduce the risk of hardware failure because of overheating

Install instructions:

Make sure the chip modules are free from dirt and grease
Peel the protective liner on the base of the heatsink
Affix the heatsinks on the chip modules and apply firm pressure

Set of aluminum heatsinks:

1 x 14mm(L) x 14mm(W) x 5mm(H) Heatsink for CPU
1 x 9mm(L) x 9mm(W) x 4mm(H) Heatsink for LAN9512
R7.88  Inc VAT
Discontinued: SBR12 L300mm Linear Rail Linear Slide Guide for CNC (AW 2D2 300mm linear slide guide)
Specifications:
Type: SBR12 
Length: 300mm
Material : Aluminum Alloy
Usage: The function of a linear guide is to support and guide moving parts.
 
Package Includes:
1 x Linear Rail
The function of a linear guide is to support and guide moving parts.
R341.97  Inc VAT
Discontinued: Outer Diameter 12mm x 500mm Cylinder Linear Rail/Shaft (AW 2D2 Rail 12x500mm)
Specifications:
MaterialBearing steel, GCr15
HardnessAbout HRC62°
Precisiong6 h6
Surface roughnessBelow 1.5uM
Surface hard-thickness0.8μ~3mm
Outer diameter8mm
Length500mm
StraightnessBelow 5μM/100mm
Hard chrome thickness3.0μM(Rmax)
ColorSilver
quantity1pcs

Features:
Surface is smooth.
Durable and easy to install.

 
Package includes:
1 X Linear Optical Axis
R227.13  Inc VAT
R301.62
Discontinued: 2Pcs 8mm 300 mm Hardened Shaft Rods + 4Pcs Bearing Blocks + 4Pcs Fixed Bearings For CNC (AW 2D4 8x300 cnc set)
Description:
 

Perfect for your DIY CNC routers, mills, lathes
No more unwanted errors in your machining work
Aluminum support rail with pre-drilled holes for ease of mounting
Material: Carbon Steel
Size: 300x8mm
 
Package includes:
 
2 x 300mm Chrome Plated Shafts
4 x LM8UU Linear Bearing Aluminum Blocks
4 x Aluminum Fixed Bearings
Image result for 2Pcs 8mm 300 mm Hardened Shaft Rods + 4Pcs Bearing Blocks + 4Pcs Fixed Bearings For 3D Printer CNC
R529.90  Inc VAT
Discontinued: NodeMcu Lua ESP8266 ESP-12E + WiFi Motor Drive Expansion Board (AW ESP-12E + WiFi Motor Drive)
Note:

This NodeMcu Lua module, is dedicated to the wifi smart car, which means this module have a special program loaded for the wifi smart car

Software: http://bbs.smartarduino.com/showthread.php?tid=2043&pid=2213#pid2213

A very handy link on how to use it

Features:


ESP12 DEV KIT development board expansion module;
ESP12 DEV KIT leads all function pins: SPI, UART, GPIO, AI and 3.3V power connector;
Expand two-way motor-driven, two-way direct drive motor;
Onboard power switch;
Motor Power range: 4.5V ~ 36V;
Control power range: 4.5V ~ 9V;
Motor power, control power separation; In the experiment, by short-circuiting block the merger, the VIN and VM short, while power supply to the motor and the control board.

Note:

When you insert ESP-12E module, please note the direction consistent with the expansion board antenna;
The use of Short circuit module that can simultaneously control board and the electrical power supply

Package includeds:

1 x (Wifi Car Dedicated) NodeMcu Lua ESP8266 ESP-12E
1 x WiFi Motor Drive Expansion Board
R169.90  Inc VAT
Discontinued: Prototyping Expansion Board For Raspberry Pi 2/3 Model B and B+ Kit (AW 3A4 Pi prototyping kit)
Features:

The hole gap is 2.54mm, and it's compatible with IC with DIP package.
The IO port can be quickly and easily implement your ideas.

Note:

- Extra header spacer included
- 170 tie points breadboard arranged in 34 rows of 5 pins included




Package includes:

1 x Prototyping Shield kit
R166.45  Inc VAT
Discontinued: 1X4 Matrix Membrane Keypad (AW 1A3 1X4 Membrane Keypad)

Description:

Punch your secret key into this numeric membrane keypad. This keypad has 4 buttons, and since every key has its own wire line, no matrix code is required - just treat these like every day switches. The membrane is soft and has a removable paper backing to expose a strong adhesive so you can stick this on an enclosure and feed the cable through a slot. Its a simple keypad but that's why we like it.

Specifications:

  • Contact Resistance: >= 100Ω
  • Insulation Resistance: 100MΩ 100V
  • Key Operating Force: 150-200N
  • Circuit Rating: 12V DC @ 30mA
  • Dielectric Strength: 250V RMS (50-60HZ/Min)
  • Electric Shock Jitter: ï¼ÂÂœ5ms
  • Operating Temperature: -40 deg. C ~+80 deg. C
  • Storage Temperature: -40 deg. C ~+80 deg. C
  • Size: 68mm x 20mm
  • Cable Length: 91mm

Contents:

  • 1 x 1x 4 Matrix Array Membrane Keypad

Resources:

R35.21  Inc VAT
Discontinued: SFU1605 1000mm Ball Screw with Single Ballnut for CNC (AW 1D3 1000mm ball screw)

Specifications:
Material: Stainless steel
Total length: 1000mm
Type: SFU1605

Features:
More resistant to wear and tear, greatly extending the life cycle of the ball screw life increased several times.
More high temperatures in harsh environments without distortion to ensure stability.
Smoother curve ball screw drive designers work more smooth and natural.
 
Package Includes:
1 x SFU1605-L1000mm Ball Screw
1 x  nut
R1,209.52  Inc VAT
Discontinued: ModMyPi RPi A+ Camera Box Bundle (Case, Lens & Wall Mount) (AW 3A1 A+ camera box bundle)

Please note: Camera and RPiA+ not included

The flexibility of this design is ideal for using a Raspberry Pi and its camera module in a variety of applications such as security with a wide angle fish-eye lens, process monitoring, computer vision, high-definition time lapses, motion sensing and many other fun projects.

 Pi Camera Box Case

The 'ModMyPi Pi Camera Box' is designed for hosting a Raspberry Pi computer (model A+) and an official Pi Camera module together in a compact and versatile enclosure. This all-integrated design ensures that the camera's fragile ribbon cable doesn't get damaged while exposed during operation. This case can accommodate an optional magnetic camera lens, which opens up new possibilities above and beyond the outstanding optical quality of the Pi Camera module. The black matte case is opaque, ensuring that the red led mounted on the Pi Camera module will not affect the ambient light captured by the camera. The back of the 'Pi Camera Box' can accept an optional wall-mounting bracket for permanent installations.
 
Features:
  • Black matte acrylic
  • Assembly time: about 10 minutes
  • Access to all of Pi's connectors
  • Features vents on the bottom, top, left and right walls
  • Features a slot for a GPIO ribbon cable
  • Dimensions: 101mm x 70mm x 33.3mm
  • 3mm thick black acrylic case (7 pieces, including left walls for both models A and B)
  • 4x rubber feet

Camera Box Wall Mount

The Raspberry Pi Camera, enclosed with the Pi in the Camera Box, and equipped with a fish eye lens, is a very capable surveillance and monitoring system that is easy to connect and program. To make the most of it, the Pi Camera box should be steadily mounted to a wall or a ceiling and should be properly angled. This bracket allows tilting and swiveling of the device. Just tighten the thumb screws when you have found the right position and you're done.

Features:

  • Bracket max. weight: up to 3.5kg (7.7 lbs)
  • Wall / ceiling mounting screws
  • Tilt angle: -24° to +15°
  • Swivel angle: ~75° left and right
  • Thumb screws for easy angle adjustments

Magnetic Fish-Eye Lens

The Raspberry Pi's camera offers great features out-of-the box, which can be enhanced by adding interchangeable lenses. The fish-eye lens will give your Raspberry Pi camera a panoramic view of its surroundings, making it perfect for surveillance, security and general monitoring scenarios. The Pi Camera Box is designed to receive the small metal ring needed for binding the magnetized fish-eye lens to the case.

Features:

  • Magnetic fish-eye lens
  • 180 degree angle (see note below)
  • Self-adhesive metal ring mount
  • Plastic lens cap
  • Key-chain attachment

Tutorials:

Pi Camera Box Assembly Instructions

This bundle includes a specially designed black matte Pi Camera Box Case, a Magnetic Fish-Eye Lens and Camera Box Wall Mount for the Raspberry Pi Model A+
R359.90  Inc VAT
MAX31855 K Type Thermocouple Breakout Board Temperature Measurement Module For Arduino (AW 2B5 Thermocouple board)
Features:

Thermocouples are very sensitive, requiring a good amplifier with a cold-junction compensation reference.
This product does everything for you, and can be easily interfaced with any microcontroller, even without an analog input.
This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested.
Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard).

Description:

Measurement temperature range: -200 °C to 1350 °C
SPI interfaces, high-speed transmission
The input voltage: 3-5v DC
Direct digital output temperature value, no amplifiers, no ADC
14-bit resolution, 0.25 degree temperature accuracy

Note:

Works with any K type thermocouple
K thermocouples have about ±2°C to ±6°C accuracy
Internal temperature reading
3 to 5v power supply and logic level compliant!
SPI data output requires any 3 digital I/O pins.

Packing includes:

1 x Thermocouple Breakout Board

Getting Started
R199.90  Inc VAT
Discontinued: OD 10mm x 500mm Cylinder Linear Shaft Chrome GCr15 (AW 2D3 Cylinder Linear Shaft 10x500mm)
Specifications:
Material: bearing steel,GCr15
Hardness: About  HRC58°
Precision: g6
Surface roughness: Below 1.5μM(Rmax)
Surface hard-thickness: 0.8μ~3mm
Outer diameter: 10mm
Length: Approx. 500mm
Straightness: Below 5μM/100mm
Hard chrome thickness: 3.0μM(Rmax)

Main purpose:
Linear axis in CNC devices, such as industrial robots, automatic recording instruments,computers,precision printers,special gas tanks,automatic wood machines and other industrial machines.
 
Package includes:
1 X Linear Shaft
R193.91  Inc VAT
R241.10
Discontinued: PiBow OmniVESA (AW PiBow OmniVESA)

The perfect mounting solution for your Raspberry Pi!

Simply remove the protective backing from the OmniVESA and follow the instructions below to mount your Raspberry Pi either bare or in any of the most popular cases.

The nylon screws provided are long enough to work with all of the relevant cases, though if you find they are protruding too far from the case of your choice you can easily trim them down using some cutting pliers. Just remember to use eye protection when cutting!

The OmniVESA supports 75mm and 100mm VESA spacing mounts, and is compatible with the following cases:

  • Pimoroni A/A+/B+/2 Cases
  • ModMyPi Modular B+/2 Cases
  • Flirc Case
  • Cyntech Model B Case
  • ModMyPi Model B Case
  • One Nine Design Case

The kit contains

  • 1 x OmniVESA
  • 2 x M4 16mm Nylon Knurled Thumbscrews
  • 2 x 5mm Nylon Spacers
  • 2 x M2.5 x 16 nylon screw
  • 3 x M2.5 nuts

Raspberry Pi uncased - use the nylon bolts provided to attach the Pi to the VESA mount using the mounting holes on the Pi itself

R126.10  Inc VAT
Discontinued: WDLabs Enclosure & Cable Kit for Pi Zero Blue (AW 1A4 WDLabs Enclosure kit Zero Blue)

While the Raspberry Pi Zero is great on its own, you still need quite a few accessories to create your favorite projects.

The WD Enclosure Kit for Pi Zero is a great expansion kit to get started with your Pi Zero. With the necessary components to easily expand USB peripherals and add mass storage to your projects, our custom-designed enclosure neatly integrates a Pi Zero and a PiDrive 314GB into a sleek, compact unit.

Please Note. Pi Zero & PiDrive Not Included.

Comes With

  • 1 Enclosure – for WD PiDrive and Raspberry Pi Zero
  • 1 USB microB right angle to USB A cable
  • 1 Mini HDMI to HDMI Adapter
  • 1 Micro USB OTG Hub
  • 1 USB Micro Power Cable
  • 1 USB Power Adapter and USB Cable (2.0A, 5V min)
  • 4 Phillips screws
  • 2 Torx screws
  • 1 Torx screwdriver

Compatible With (Not Included)

  • Raspberry Pi Zero
  • WD PiDrive or 2.5" USB HDD (7mm-15mm)
  • HDMI Cable
  • Philips screwdriver
The WD Enclosure Kit for Pi Zero is a great expansion kit to get started with your Pi Zero.
R392.41  Inc VAT
Discontinued: ModMyPi Modular RPi Case - SD Card Cover (Blue) (AW mod SD cover blue)
MODULAR CASE NOT INCLUDED

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.
 
The Micro SD card cover is a tamperproof, clip fit part and can only be removed by taking the top off the case first. It’s designed to protect the Micro SD card from accidental knocks and bangs, in addition to securing the card from theft and unwanted removal.
 
Micro SD Card Cover Features:
  • Flush, Lockable and Tamper-Proof.
  • Secure your Micro SD Card from Probing Fingers
  • Protect your Micro SD Card from Accidental Knocks & Bangs
R35.31  Inc VAT
Discontinued: ModMyPi Modular RPi Case - 10mm Spacer (White) (AW modular spacers white)
MODULAR CASE NOT INCLUDED

The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.
 
The basic case has a stock internal headroom of 25.70mm, measured from the top of the RPi PCB to the inside of the lid, which allows many Raspberry Pi breakout boards to fit without any modifications. If the user wants to increase this headroom further, to enable the use of larger breakout boards, place protoype PCBs internally, or stack multiple boards on one another, spacers can be utilised. Spacers increase the internal height by 10mm per spacer, and can be stacked to increase the headroom further e.g. 2 spacers would be 20mm extra. Spacers can be stacked as high as needed, however longer screws are required if the case needs to be secured.
 
10mm Stackable Spacers Features:
  • Makes Your Case Compatible with 99% of Breakout Boards
  • Spacers Raise Internal Height by 10mm Enabling the Case to Grow with your Project
  • Spacers can be Stacked Increasing Internal Height by up to 50mm or more!
  • Great for Embedded Applications, and Hobbyist Projects

Screw Size Guide

Depending on the number of spacers required, the length of the screw required will change. We currently cater for up to 5 spacers with corresponding screw lengths. Screws types compatible with spacers plates are both No.4 (US) and M3 (UK/EU). Users can of course, source screws via their own channels, or alternatively screws up to 78mm are available from ModMyPi in packs of four.

No. of SpacersScrew Length Required (mm)
028 (Included with Case)
138
248
358
468
578

 

Downloads

 

R38.69  Inc VAT
R49.43
Discontinued: T100 DIY Tank Chassis Aluminum (AW 1D1 Silver Tank chassis)
Features:

Name: T100 smart tank chassis
Material: Aluminum
Oxidation: Yes
Color: Silver
Track: Plastic
Size: about 200 x 190 x 80 (L x W x H)
Operating voltage: 9V-12V

Motor parameters:

Name: 25mm brushless DC motor (with Hall sensors code disk)
Output rate: 150 ± 10% rpm
Load current: 200mA (Max)
Stall current: 4500mA (max)
Stall Torque: 9.5kgNaN
Load speed: 100 ± 10% rpm
Load moment: 3000gNaN
Load current: 1200mA (Max)
Load noise: 56dB
Operating voltage: 9V
Shaft extension Dimensions: 14.5mm
Axial clearance: 0.05-0.50mm
Screw size: M3.0
Shaft: phi4mm, D3.5
Code disk parameters: two pulses / revolution

Package includes:

1 x Chassis bracket
1 x Track (pair)
2 x Driving wheels
4 x Wheel drive
1 x Motor (pair) (with encoder)
R1,108.64  Inc VAT
Discontinued: USB A to Micro B Spring Coiled 1m 5Pin Data Sync Power Cable (AW 2C3 Micro USB spring cable)
Features:

1. Micro USB spring retractable data cable.
2. Quality retractable wire, can be combined with car charger, computer USB, charger, mobile power supply, support for charging and data transfer.
3. Quality durable, retractable spring, long service life.
4. Suitable for device with micro USB interface.

Specifications:

1. Product name: Spring retractable data cable
2. Material: PV
3. Color: Black
4. Length: Approx. 8.3cm/3.26"
5. Stretching up to: 95-100cm/37.4"-39.3"
6. Interface type: Standard USB2.0 interface

Package Includes:

1x Micro USB spring cable
R59.52  Inc VAT
Per Page      1 - 20 of 192