Search
Search Criteria
Products meeting the search criteria
The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
Wanhao Premium Filament PLA Dark Green 1Kg 1.75mm (PLA filament Dark Green)
Product images are not necessarily representative of the actual colour.
Nothing will impact your 3D printing results like the kind of filament you use.
Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound.
PLA, aka Polylactic Acid, is a multipurpose material commonly used in 3D printing. PLA is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material it is much better for the environment, especially compared to petrochemical-based alternatives (such as ABS). Our PLA is compatible with nearly all 3D printers.
Nothing will impact your 3D printing results like the kind of filament you use.
Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound.
PLA, aka Polylactic Acid, is a multipurpose material commonly used in 3D printing. PLA is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material it is much better for the environment, especially compared to petrochemical-based alternatives (such as ABS). Our PLA is compatible with nearly all 3D printers.
Wanhao Premium Filament PLA Green 1Kg 1.75mm (PLA filament Green)
Product images are not necessarily representative of the actual colour.
Nothing will impact your 3D printing results like the kind of filament you use.
Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound.
PLA, aka Polylactic Acid, is a multipurpose material commonly used in 3D printing. PLA is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material it is much better for the environment, especially compared to petrochemical-based alternatives (such as ABS). Our PLA is compatible with nearly all 3D printers.
Nothing will impact your 3D printing results like the kind of filament you use.
Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound.
PLA, aka Polylactic Acid, is a multipurpose material commonly used in 3D printing. PLA is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material it is much better for the environment, especially compared to petrochemical-based alternatives (such as ABS). Our PLA is compatible with nearly all 3D printers.
Wanhao Premium Filament PLA Natural 1Kg 1.75mm (PLA filament Natural)
Product images are not necessarily representative of the actual colour.
Nothing will impact your 3D printing results like the kind of filament you use.
Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound.
PLA, aka Polylactic Acid, is a multipurpose material commonly used in 3D printing. PLA is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material it is much better for the environment, especially compared to petrochemical-based alternatives (such as ABS). Our PLA is compatible with nearly all 3D printers.
Nothing will impact your 3D printing results like the kind of filament you use.
Good filament is highly consistent in diameter, is wound evenly onto the spool with just the right amount of tension, and will not tangle when being unwound.
PLA, aka Polylactic Acid, is a multipurpose material commonly used in 3D printing. PLA is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material it is much better for the environment, especially compared to petrochemical-based alternatives (such as ABS). Our PLA is compatible with nearly all 3D printers.
DaVinci Lab PLA filament (1.75mm) Pink (PLA Da Vinci PINK)
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
DaVinci Lab PLA filament (1.75mm) Yellow (PLA Da Vinci YELLOW)
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
DaVinci Lab PLA filament (1.75mm) Orange (PLA Da Vinci ORANGE)
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
DaVinci Lab PLA filament (1.75mm) Green (PLA Da Vinci GREEN)
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
DaVinci Lab PLA filament (1.75mm) Black (PLA Da Vinci BLACK)
DaVinci Lab’s PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.
- Davinci Lab PLA
- Print temp :- 190 - 220 degrees
- Heated Bed :- 50 - 60 degrees (optional)
- Speed range :- 50 - 80mm/s optimal
- Printability :- Easy
- Weight: - 1kg
DaVinci Lab ABS filament (1.75mm) Black (ABS Da Vinci BLACK)
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
DaVinci Lab ABS filament (1.75mm) White (ABS Da Vinci WHITE)
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
DaVinci Lab ABS filament (1.75mm) Orange (ABS Da Vinci Orange)
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
DaVinci Lab ABS filament (1.75mm) Purple (ABS Da Vinci Purple)
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
DaVinci Lab ABS filament (1.75mm) Yellow (ABS Da Vinci Yellow)
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
DaVinci Lab ABS filament (1.75mm) Green (ABS Da Vinci Green)
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
DaVinci Lab ABS filament (1.75mm) Blue (ABS Da Vinci Blue)
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
DaVinci Lab ABS filament (1.75mm) Red (ABS Da Vinci Red)
DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.
- Davinci Lab ABS
- Print temp :- 220 - 250 degrees
- Heated Bed ;- 80 - 90 degrees (optional)
- Speed range 60 - 85 mm/s
- Fan :- No
- Weight :-1kg
- Printability :- intermediate
M3 Delta Adjustable Pulley 3D Printer Injection Molded Piece (1D2 M3 delta belt coupler)
Features:
Bore distance: 20mm x 20mm
For: M3 (Both sides of the screw)
Suitable belt: GT2 / MXL 6mm (note: belt not included)
Material: High strength nylon
Package includes:
1 x M3 Delta Adjustable Pulley
Bore distance: 20mm x 20mm
For: M3 (Both sides of the screw)
Suitable belt: GT2 / MXL 6mm (note: belt not included)
Material: High strength nylon
Package includes:
1 x M3 Delta Adjustable Pulley
L293D Dual H-Bridge IC - Solenoid, DC & Stepper Motor Driver (1D3 L293D IC H-bridge)
The L293DNE Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
Each chip contains two full H-bridges (four half H-bridges) which means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver
The L293D Dual H-Bridge IC - Stepper & DC Motor Driver Features:
- Dual H-Bridges - run four solenoids, two DC motors, or one uni-polar or bi-polar stepper motor
- Output Current: 600mA per channel (1.2A Max)
- No of Channels: 4
- Input: 5V Logic
- Supply Voltage Range: 4.5V to 36V
- No. of Pins: 16
- Operating Temperature Range: 0°C to +70°C
Downloads
Tutorials
Controlling a Stepper Motor with the L293D
The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
Geekcreit® RAMPS 1.4 + Mega2560 + A4988 + 2004LCD Controller 3D Printer Kit For Arduino Reprap (3D4 Ramps Arduino reprap 3d printer kit)
3D Printer Controller RAMPS 1.4:
The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Features:
USB type B receptacle.
SD Card add on available.
Fits 5 Pololu stepper driver board.
LEDs indicate when heater outputs on.
Expandable to control other accessories.
Heated bed control with additional 11A fuse.
Option to connect 2 motors to Z for Prusa Mendel.
I2C and SPI pins left available for future expansion.
It has provisions for the cartesian robot and extruder.
All the Mosfets are hooked into PWM pins for versatility.
3 mosfets for heater / fan outputs and 3 thermistor circuits.
Fused at 5A for additional safety and component protection.
Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available.
Arduino-Compatible Mega 2560 R3:
Fully compatible with original Arduino MEGA 2560 R3, with this product, you are able to use all the Arduino open source platform to create or learn interactive objects.
Compared with UNO R3, this is with main Chip ATmega2560, with more I/O Pins, and additional 10 PWM output, of course, the EEPROM is also with larger space.
A4988 StepStick Compatible Stepper Motor Driver Module:
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and +- 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing.
A4988 surface mount QFN package (ES), a size of 5 mm x 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating.
Note: PCB Colors May vary
LCD 2004 Graphic Smart Display Controller:
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
Package includes:
1 x 3D Printer Controller RAMPS 1.4 Board
1 x Arduino-Compatible Mega 2560 R3
5 x A4988 StepStick Stepper Motor Driver Module with heatsinks
1 x LCD 2004 Craphic Smart Display Controller
1 x USB Cable
The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Features:
USB type B receptacle.
SD Card add on available.
Fits 5 Pololu stepper driver board.
LEDs indicate when heater outputs on.
Expandable to control other accessories.
Heated bed control with additional 11A fuse.
Option to connect 2 motors to Z for Prusa Mendel.
I2C and SPI pins left available for future expansion.
It has provisions for the cartesian robot and extruder.
All the Mosfets are hooked into PWM pins for versatility.
3 mosfets for heater / fan outputs and 3 thermistor circuits.
Fused at 5A for additional safety and component protection.
Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available.
Arduino-Compatible Mega 2560 R3:
Fully compatible with original Arduino MEGA 2560 R3, with this product, you are able to use all the Arduino open source platform to create or learn interactive objects.
Compared with UNO R3, this is with main Chip ATmega2560, with more I/O Pins, and additional 10 PWM output, of course, the EEPROM is also with larger space.
A4988 StepStick Compatible Stepper Motor Driver Module:
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and +- 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing.
A4988 surface mount QFN package (ES), a size of 5 mm x 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating.
Note: PCB Colors May vary
LCD 2004 Graphic Smart Display Controller:
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
Package includes:
1 x 3D Printer Controller RAMPS 1.4 Board
1 x Arduino-Compatible Mega 2560 R3
5 x A4988 StepStick Stepper Motor Driver Module with heatsinks
1 x LCD 2004 Craphic Smart Display Controller
1 x USB Cable
TEVO® 3D Printer Bearing Wheel for V-slot (3d printer wheel bearing)
Type: Pulley
Outside Diameter: about 24mm
Bore: 5mm
Thickness: about 10.23mm
Size: about 24mm x 16mm x 10.23mm
Material: POM
With Bearings: YES
Bearing: 625zz bearing Packing includes:
1x Wheel with Bearing
Outside Diameter: about 24mm
Bore: 5mm
Thickness: about 10.23mm
Size: about 24mm x 16mm x 10.23mm
Material: POM
With Bearings: YES
Bearing: 625zz bearing
1x Wheel with Bearing