Search
Search Criteria
Products meeting the search criteria
These headers easily cut to size if needed
Ideal for:
- Arduino
- Pi Zero
- Electronic projects
- Printed circuit boards
Compatible with: 80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions
For the 2020 the size is 60mm x 60mm x 4mm, recommend to use M5 x10mm screw and M5 T nut
Material: Aluminium
Colour: Silver
Aperture:M5
Holes Spaced:20mm / 0.79 inch
Thickness:4mm / 0.16 inch
Dimensions: 60mm x 60mm /2.36 x 2.36 inch

Overview
This is a highly integrated rectangle-shaped all-in-one capacitive fingerprint sensor module, which is designed in small form factor. The module is controlled via UART commands, fairly easy to use. It's advantages includes fast verification, high stability, and low power consumption, etc.
Based on a high performance Cortex processor, combined with high-security commercial fingerprinting algorithm, the UART Fingerprint Sensor (R) features functionalities like fingerprint enrolling, image acquisition, feature finding, fingerprint matching, and so on. Without any knowledge about the complicate fingerprinting algorithm, all you need to do is just sending some UART commands, to quickly integrate it into fingerprint verification applications which require small size and high precision.
Features
- Easy to use by some simple commands, you don't have to know any fingerprint technology, or the module inter structure
- Commercial fingerprinting algorithm, stable performance, fast verification, supports fingerprint enrolling, fingerprint matching, collect fingerprint image, and upload fingerprint feature, etc.
- Capacitive sensitive detection, just touch the collecting window lightly for fast verification
- Hardware highly integrated, processor and sensor in one small chip, suit for small size applications
- Embedded human sensor, the processor will enter sleep automatically, and wake up when touching, lower power consumption
- Onboard UART connector, easy to connect with hardware platforms like STM32 and Raspberry Pi
Specifications
- Sensor type: capacitive touching
- Resolution: 508DPI
- Image pixels: 192×192
- Image grey scale: 8
- Sensor size: 11.2mm × 12.2mm
- Module size: 20.2mm × 33.3mm
- Fingerprint capacity: 3000
- Matching time: <0.2s (1:N, and N≤100)
- False acceptance rate: <0.001%
- False rejection rate: <0.1%
- Operating voltage: 2.7~3.3V
- Operating current: <50mA
- Sleep current: <16uA
- Anti-electrostatic: contact discharge 8KV / aerial discharge 15KV
- Interface: UART (TTL level)
- Baudrate: 19200 bps
- Operating environment:
- Temperature: -20°C~70°C
- Humidity: 40%RH~85%RH (no condensation)
- Storage environment:
- Temperature: -40°C~85°C
- Humidity: <85%RH (no condensation)
Applications
- Fingerprint lock
- Fingerprint safe deposit box
- Access control system
- Clock in and out
Development Resources
Wiki : www.waveshare.com/wiki/UART_Fingerprint_Sensor_(R)
Recommended Items
We recommend this USB to UART Module for easy testing: FT232 USB UART Board (micro)
Package Includes:
1 x 6PIN squid wire
Model | PT361060M3MP12 |
Focal length | 6mm |
Resolution | 3 MegaPixel |
Aperture | F1.2 |
Mount | CS |
Field angle DxHxV(°) | 63° |
M.O.D. | 0.2m |
Back focal length | 7.53mm |
Dimensions | 30 x 34mm |
Weight | 53g |
Operation | Manual |
Compatible with: 80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions
Recommend to use M5 x10mm screw and M5 T nut
Material: Mild Steel
Thickness:3mm
These plates are laser cut from 3mm mild steel and still needs to be painted/powder coated.
Compatible with: 80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions
Recommend to use M5 x10mm screw and M5 T nut
Material: Mild Steel
Thickness:3mm
These plates are laser cut from 3mm mild steel and still needs to be painted/powder coated.
The liquid level switch detects the rising level of liquid in a sump or tank. It can be connected to a micro controller. It can then be used to start/stop a pump which then pumps liquid in/out until the level of the liquid has been restored to the point where the pump is switched off again. The switch may be used in a pump station, a sensor, a tank alarm, or other devices.
Specification:
Contact Rating: 10W
Switching Voltage: 220V
Switching Current: 0.5A
Breakdown Voltage: 220VDC
Carry Current: 1.0A
Contact Resistance: 100mohm
Resources:
Python library
Introduction to Buttons and Switches
Types of buttons and switches
The Raspberry Pi's camera offers great features out-of-the box, which can be enhanced by adding interchangeable lenses.
This wide angle lens will allow you to capture more of the scene in your photo. Perfect for getting those beautiful landscape shots.
Each lens comes with the following:
- Lens cap
- Key-chain attachment
- Self-adhesive metal ring mount
Please note: These lenses are designed to be attached to a case, using the self-adhesive metal ring. They do not attach directly the the Raspberry Pi camera!
A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino.
It's perfect for building into projects - industrial, scientific, or just fun - and much more affordable than most thermal cameras. Our breakout makes it easy to use the camera with your Raspberry Pi or Arduino, using I2C and 3-6V supply. And it's available in two different fields of view, 55° (standard) or 110° (wide angle) depending on your preference.
The MLX90640 far-infrared camera is an array of 768 (32x24) thermal sensors that can detect temperatures from -40 to 300°C with approximately 1°C accuracy and up to 64FPS! The applications of this camera are manifold: measure the heat or heat dissipation of devices like CPUs, circuit boards, or electrical appliances; use it to identify thermal inefficiencies in your home; or use it for presence detection to identify bodies in complete darkness.
It's also compatible with our fancy new Breakout Garden, where using breakouts is as easy just popping it into one of the six slots and starting to grow your project, create, and code.
Features
- Melexis MLX90640 far-infrared sensor array (datasheet)
- 32x24 pixels
- Field of view: 55°x35° or 110°x75°
- Up to 64FPS
- -40 to 300°C detection with approximately 1°C accuracy
- I2C interface (address 0x33)
- 3.3V or 5V compatible
- Reverse polarity protection
- Compatible with all models of Raspberry Pi, and with certain Arduino models
Kit includes
- MLX90640 breakout
- 1x5 male header
- 1x5 female right-angle header
We've designed this breakout board so that you can solder on the piece of right-angle female header and pop it straight onto the bottom left 5 pins on your Raspberry Pi's GPIO header (pins 1, 3, 5, 7, 9).
Software
We've written software in C that you can use to generate images and video from the MLX90640 cameras.
SparkFun also provide an example Arduino/Processing sketch for the MLX90640.
Our software does not support Raspbian Wheezy.
Notes
Dimensions: 19x19x2.75mm (LxWxH).
Python code
This minimal camera for the Pi Zero (or Pi Zero W) is perfect for small camera projects where space is at a premium.
The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there, Lennie!
Otherwise it's an economical and svelte solution for bird box cameras, body-cams, home security, and simple computer vision projects.
Now with 160 degree wide angle lens
Features
- 5MP sensor, 2592x1944 pixels (same as version 1 official Pi camera)
- 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
- f2.9 lens, 3.60 mm focal length
- 53.50 degrees horizontal, 41.41 degrees vertical field of view
- Approx. dimensions of circuit and camera: 60 x 11.4 x 5.1mm
Notes
- Only for Raspberry Pi Zero or Zero W with CSI camera port
- Raspberry Pi Zero not included
Getting started with PiCamera
Compatible with: 80/20 20 Series, Misumi 5 Series, Openbuilds V-Slot, Openbuilds C-Beam, and other standard v-slot/t-slot 20mm aluminum extrusions
Recommend to use M5 x10mm screw and M5 T nut
Material: Mild Steel
Thickness:3mm
These plates are laser cut from 3mm mild steel and still needs to be painted/powder coated.
- 1