Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Electronics Kit 2 for micro:bit (MM Electronics kit2 micro:bit)
An electronics kit for your BBC micro:bit 2.

You will need a micro:bit V2

Description:

Downloadable 25 page booklet: https://www.monkmakes.com/downloads/instructions_mb_kit_2.pdf

Build 7 great projects:

  •     Lighthouse
  •     Movement Alarm
  •     Color Mixer
  •     Anemometer
  •     Fan Speed Controller
  •     Clap Controller Fan
  •     Nightlight

What's in the box?

 1 x   MonkMakes Relay
 1 x   MonkMakes RGB LED
 1 x   Alligator Leads
 1 x  Motor with Fan
 1 x   Single AA Battery Box
 1 x   LED Lamp
R389.90  Inc VAT
Tracking Robot Car Electronic DIY Kit With Reduction Motor (DIY track robot kit)
Description:

This kit introduces quite a few electronic principles, its fun and not difficult to build. This is a self-build DIY smart tracking robot car kit. It is an introductory electronic kit designed to help kids, electronic enthusiasts, and novices learn about basic electronic knowledge like soldering and simple circuits(photoelectric sensor circuit, voltage comparator, motor driving,ir sensors etc.) The smart kit is designed based on the principle of infrared sensor and light reflectivity difference when the light emitting on the white and black items




The assembly steps:


Step 1: Welding circuit

Soldering part is simpler, welding sequence according to the principle of component level from low to high, the first welding eight resistance, is important to use multimeter to confirm resistance is correct, D4, D5 R13 R14 can temporarily not welding, integrated circuit chips can temporarily not inserted

Step 2: Mechanical assembly

The red line is connected to the 3V positive power supply, the yellow line grounding, excess wire an be used for motor wire.

Step 3: The installation of a photoelectric circuit

Photosensitive resistance and light-emitting diodes (note polarity) is reverse-mounted on the PCB, and the ground distance is about 5 mm, both photosensitive resistance and light-emitting diodes are 5 mm distance. Finally, you can power test.

Step 4: Vehicle debugging

The right direction is along the universal wheel direction, if you press and hold the left photoresistor, the wheels on the right side of the car should be rotated. Press and hold the right photoresistor, the wheels on the left side of the car should be rotated, if the car driving back, can also exchange the wiring of two motors, if the one side normal and the other side back up, as long as you can swap wiring of back side.

Note: We don't supply any manuals please note this before you buy it.

Package includes:

1 x Electronic DIY Kit (batteries are not included)



R169.90  Inc VAT
12V Electronic Door Lock Access Control for Cabinet Drawer (solenoid cabinet lock)
Description:

This highly secure and easy to operate door lock, makes a perfect match for desk, cabinet, window or safe box.

Connecting it to a stable power supply will open the lock when energized.

Specifications:

  • Voltage: DC12V
  • Current Draw: DC12V/60mA
  • Fail Secure: Locked when power off
  • Extension length: 9.8mm close
  • Lock Size: 53 x 39 x 25(mm)
  • Bolt Dimension: 9.8 x 9(mm)
  • Weight: 150g


Features:

Highly secure and easy to operate 
Fit for desk, cabinet, window or safe box
 
Package Includes:

1 x Electric Cabinet Lock
R229.90  Inc VAT
2 Pcs LilyPad Button Connect Sensor Board Module for Arduino Power DIY KIT Momentary Push Button Electronic PCB Board Module (wearable buttons(2))
Description:

We designed this board to give the user a very discrete button without any edges. Button closes when you push it and opens when you release (momentary push button).
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Package:

2 x LilyPad Button Board module for ArduinoWe designed this board to give the user a very discrete button without any edges. Button closes when you push it and opens when you release (momentary push button).
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!
 
Dimensions:

8mm x 16mm
Thin 0.8mm PCB
 
Package Includes:

2 x LilyPad Button Board module for Arduino

Getting started with Lilypad button sensor board
R11.90  Inc VAT
Rear Bike Light Project Kit (KT bike kit)
Product Description

This easy build bike light kit has just ten parts, making it a good introduction to electronics. The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light. Making it ideal for use as a rear bike light.

Alternatively it can be used as a night safety product or flashing eyes.

Features:

  • Easy build kit making a great introduction to electronics.
  • Great visibility for night time safety.

Contents:

  • 1 x 2xAA Battery Cage with Leads.
  • 2 x 470K Resistor.
  • 1 x 33R Resistor.
  • 2 x Capacitor, Electrolytic, 16V, 10uF.
  • 2 x BC547 NPN Transistor.
  • 2 x Red 5mm Water Clear LED - 30deg - 1000mCd.

Dimensions:

  • Length: 48.5mm.
  • Width: 25.5mm.

Requires:


Resources:


This easy build bike light kit has just ten parts, making it a good introduction to electronics. The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light. Making it ideal for use as a rear bike light.

Alternatively it can be used as a night safety product or flashing eyes.

Caution:

  • This is an educational kit and should be used in conjunction with a commercially available bike light.
R59.90  Inc VAT
Easy Build Timer Project Kit (KT timer kit)
Product Description

With its low part count this easy build timer project makes a good introduction to electronics. The timer uses a resistor capacitor network to provide a time delay of between 1 second and 4 minutes, which is set by the PCB mount variable resistor. When the button is pressed the LED changes from red to green, then at the end of the time interval it turns red.

Features:

  • Easy build timer kit.
  • When the time set has been reached the LED changes colour.
  • The time delay can be adjusted via the variable resistor.

Contents:

  • 1 x 2AA Battery Cage.
  • 1 x 47Ω Resistor.
  • 2 x 10KΩ Resistors.
  • 1 x 1MΩ Potentiometer.
  • 1 x Capacitor, Electrolytic, 10V, 1 mF.
  • 1 x BC558 PNP Transistor.
  • 1 x Tri colour 5mm diffused LED - 650mCd.
  • 1 x 6mm PCB Mount Tactile Switch 9.5mm Height.
  • 1 x Easy Build Timer PCB

Dimensions:

  • PCB Length: 54mm.
  • PCB Width: 26mm.

Requires:


Resources:

Note:

  • This kit requires soldering.
R69.90  Inc VAT
Air Freshener Kit (KT fan kit)
Product Description

This kit uses a silent low current motor to spin a fan, making it perfect to circulate air through an air freshener containing potpourri or it can be used to move a light weight buggy. The electronics take no power in standby and when the switch is pressed the motor spins for up to 100 seconds. This time is adjustable via the on board variable resistor.

Features:

  • Silent motor.
  • Adjustable timer.

Contents:

  • 1 x Battery Holder With Leads (2x AA).
  • 1 x 1K Resistor 5%.
  • 1 x 1M resistor.
  • 1 x PCB Trimmer 1M POT.
  • 1 x 16V 220uF Electrolytic Capacitor.
  • 2 x BC547 NPN Transistor.
  • 1 x Miniature Push to Make Switch, Red.
  • 1 x Low Inertia Solar Motor - 1820 RPM.
  • 1 x 55mm White Four Blade Miniature Impeller.
  • 0.5m Connecting Wire.
  • 1 x Air Freshener PCB.

Dimensions:

  • Length: 46mm.
  • Width: 28mm.

Requires:

Resources:

This kit is supplied in a grip seal bag.


R99.90  Inc VAT
Heat Activated Switch (KT heat switch kit)
Product Description

This temperature activated project kit is also available as a light activated project kit. The output of this board can be used to control other electronic circuits, turning them on automatically when it goes hot or cold.

The board has space for an LED with current limit resistor (both available separately) which will light when the output turns on.

The Darlington pair transistor configuration allows an output current of up to half an amp to be controlled. Operating voltage 3V to 10V (lower voltages allow for better adjustment of the switching point).

Features:

  • The Temperature Switch Kit detects the temperature of its surroundings using a thermistor.
  • The kit acts as an automated on/off switch (temperature dependent).

Contents:

  • 1 x 47KΩ Potentiometer.
  • 2 x BC337 NPN Transistors.
  • 1 x Thermistor.
  • 1 x 220Ω Resistor.
  • 1 x Heat Activated Switch PCB

Possible applications include:

  • Babies bath over temperature indicator.
  • Automatic fan.

Dimensions:

  • PCB Length: 53mm.
  • PCB Width: 25.5mm.

Requires:


Resources:


Note:

  • This kit requires soldering.
R53.90  Inc VAT
Relay Board (KT relay kit)
Product Description

This is a versatile relay board kit that can easily be configured via jumpers and trimmer potentiometers to do a range of tasks.

Most sensor and switches can be connected to the input of the board and the trigger level set for the input device. This can be inverted if required, then there is the option to feed this straight to the relay or a timer of up to 25 minutes can be used. Irrespective of the state of the invert jumper whenever the sense LED goes from off to on the timer restarts.#

The board can run off any voltage from 4.5 to 6 volts.

The output cans switch DC or mains.

This datasheet details what the board does and how to use it along with some worked examples. A more detailed set of information including the build instructions & how to configure the kit can also be downloaded.

Click here to download the full teaching notes pdf_icon.gif

WARNING: Using mains electricity can be dangerous and should only be attempted by qualified electricians.

This kit includes:

  • 3 x 100Kohm resistors
  • 3 x 220ohm resistors
  • 1 x 47Kohm resistors
  • 1 x 1Mohmpotentiometer
  • 1 x 10Mohm potentiometer
  • 2 x 1N4001 diodes
  • 2 x 5mm red LEDs
  • 1 x 100uF capacitors, electrolytic
  • 1 x 4.7uF capacitors, electrolytic
  • 1 x 2N7000 n-channel FET
  • 2 x 2 way terminal blocks
  • 1 x 3 way terminal blocks
  • 1 x LM324 operational amplifier IC
  • 1 x 14 pin IC holder
  • 2 x 3 way pinstrip
  • 2 x Jumpers
  • 1 x Relay
  • 1 x Relay board PCB

PCB dimensions: 86.5mm x 49mm.

This kit is supplied as a pack of parts and requires soldering.

R159.90  Inc VAT
Deluxe Rear Bike Light Kit (KT deluxe bike kit)
Product Description

The Kitronik Deluxe Rear Bike Light Kit is easy to build kit and is an excellent way to learn about the very popular 555 timer IC. The kit uses four ultra bright LEDs that can be operated in two modes; constant and flashing.

A key design aim of the kit was that it should conform to all relevant British Standard measures. Both the flash rate and brightness conform to British Standards for vehicle road lighting (2005), making it ideal for use as a rear bike light. Alternatively, it can be used as a night safety product or flashing eyes.

During testing we connected the kit to 3 x AAA batteries and ran it continuously. At 80 hours of continuous use the LEDs were still lit at full brightness. After 107 hours, although still lit, the brightness had dropped below the level at which you would want to use them. So, we estimate that with brand new batteries you could comfortably run the light for 2 hours of daily commuting for at least an entire month with the LEDs still at full brightness.

Features:

  • An easy to build rear bike light project that conforms to British Standards for vehicle road lighting (2005) for both brightness and flash rate.
  • Learn about the very popular 555 timer IC.
  • The kit features 4 x bright LEDs.
  • It has two operating modes; continuous and flashing.
  • Its compact design makes it the ideal choice for designing custom enclosures.

Contains:


Dimensions:

  • PCB Length: 52.6mm.
  • PCB Width: 37.6mm.
  • PCB Thickness: 1.6mm.

Video: https://youtu.be/KPPh7Nwa1ts

Requires:


Resources:

R104.90  Inc VAT
Electro-Fashion Starter Pack, Standard Cell Holder (Fashion Starter Pack)
Product description:

This pack is a great way to get started with E-Textiles.

We have selected a number of products from our Electro-Fashion range, including three of our ultra-slim LEDs and two seperate power boards. There are enough components for you get started immediately to create some eye catching E-Textiles projects, the only limit is your imagination.

Features:

  • Everything you need to complete two projects.
  • Enough Electro-Fashion components to get started immediately with E-Textiles.
  • Full instructions for assembly.
  • Great project ideas and tutorials.

Contents:

  • 2 x Coin Cell Holder.
  • 3 x Sewable LEDs  White.
  • 3 x Flashing LEDs White.
  • 1 x Slide Switch.
  • 1 x Push Switch.
  • 2 x CR2032 Coin Cell Batteries.
  • 1 x 6m Conductive Thread.

Dimensions:

  • Sewable Coin Cell Holder Length: 34mm.
  • Sewable Coin Cell Holder Width: 20mm.
  • Sewable Coin Cell Holder Height: 4.5mm.
  • Ultra Slim Sewable LED Length: 15mm.
  • Ultra Slim Sewable LED Width: 6.5mm.
  • Ultra Slim Sewable LED Height: 2.7mm.
  • Slide Switch Length: 18mm.
  • Slide Switch Width: 8.5mm.
  • Slide Button Switch Height: 4mm.
  • Push Button Switch Length: 18mm.
  • Push Button Switch Width: 8.5mm.
  • Push Button Switch Height: 3mm.
  • CR2032 Battery Height: 3.2mm.
  • CR2032 Battery Diameter: 20mm.

Requires:


Resources:


Caution:

  • The coin cell holders in this pack contain Nickel and should not be used in designs where it will be in prolonged contact with the skin.
R289.90  Inc VAT
Electronics Kids School Science Educational 1st circuit Project (first basic circuit)
Description:

Take this step to enrich children's leisure lives, cultivate hands-on ability, and consolidate knowledge. Assisting teachers and parents in better physics teaching. 
Aid young children and elementary school students to increase their physical knowledge in a hands-on form with a simple series circuits


Specifications:

  • Color: Green Black (As Picture Show)
  • Material: Plastic
  • Battery: 2*AA Battery (Not included)

Package Contents:

1 x Bulb Holder
1 x Battery Holder
1 x Switch
1 x Bulb
1 x Conductive Line
(batteries not included)
R49.90  Inc VAT
CamJam EduKit (CamJam EduKit)
Description:

The CamJam EduKit is your way into the world of building electronic circuits and programming the Raspberry Pi in Python.

 Specifications:

The CamJam EduKit features the following components all neatly packaged in a tin:
• A 400pt breadboard
• 3 LEDs (Red, Yellow and Green)
• A button
• A buzzer
• Resistors and jumper cables

 

The kit is accompanied by a set of downloadable worksheets that will take you through a series of exercises from writing a simple program in the Python programming language to lighting up LEDs, reading button presses and making a buzzer go beep! Whereas other products come pre-assembled, the CamJam EduKit introduces you to the world of breadboarding and building electronic circuits yourself, which we think is much more exciting!

 

All the worksheets are freely available to download from http://camjam.me/edukit

 

The CamJam EduKit is a joint venture between The Pi Hut and the Cambridge Raspberry Jam (CamJam). Profits from the sale of the kit will go to CamJam so that they can continue their educational and community work.
R119.90  Inc VAT
CamJam EduKit 2 - Sensors (CamJam EduKit #2)
Description:

The CamJam EduKit #2 is the latest edition to the EduKit family!

The kit is accompanied by a set of (currently 6) downloadable worksheets (or lesson plans for you educators!) that will take you through a series of exercises and projects, teaching you how to make the most of your kit. Whats best is that there is no soldering required, each high quality component is breadboard friendly!

 

All the worksheets are freely available to download from http://camjam.me/edukit

 

Kit Contents:
  • 1 x Breadboard
  • 1 x Immersible temperature Sensor
  • 1 x PIR Sensor
  • 1 x LDR
  • 1 x Active Buzzer
  • 1 x Red 10mm LED
  • 1 x Blue 10mm LED
  • 1 x 4.7K Resistor
  • 2 x 330 Resistor
  • 10 x M/F Jumper Wires
  • 4 x M/M Jumper Wires
  • 1 x Presentation Tin

 

Here are just 4 cool projects you could use the kit for:
  • Make a burglar alarm for your bedroom.
  • Switch on an LED when it gets dark.
  • Have an alarm go off when it’s freezing outside.
  • Test whether the light really does go off in the fridge when you shut the door.

 

Still not convinced? Check out these awesome articles on the kit!

 

The CamJam EduKit is a joint venture between The Pi Hut and the Cambridge Raspberry Jam (CamJam). Profits from the sale of the kit will go to CamJam so that they can continue their educational and community work.
R179.90  Inc VAT
CamJam EduKit 3 - Robotics (CamJam EduKit 3 Robotics)
Description:

The third in the series is here! The CamJam EduKit #3 is focused on robotics and contains (almost) everything you need to create your very own Raspberry Pi-powered robot.

All you need to do is to add your own chassis, Raspberry Pi (any model) & batteries! Then, follow the worksheets to make your own motorized buggy. Add the included sensors and you will soon be detecting objects in front of your robot and following line courses. Included in the kit are the following components:

  • A custom-designed, pre-soldered motor controller board (with screw terminals)
  • Two DC motors (with wires pre-soldered)
  • Two custom red wheels (which go extra fast… because they’re red!)
  • A ball castor (used as the ‘third wheel’ to your robot)
  • A small breadboard (to create your circuits)
  • Two pieces of strong 3M padded double-sided tape
  • A battery box for 4 AA batteries (batteries not included)
  • An ultrasonic distance sensor (for detecting objects in front of your robot)
  • A line follower sensor (for detecting and following black lines)
  • Resistors and jumper cables with which to complete your circuits
  • A strong cardboard box to keep it all in… or to cut into to make your chassis!

All the worksheets are freely available to download from http://camjam.me/edukit

 

Got a 3D printer? Daniel Bull has very kindly designed an awesome chassis, available from Thingiverse ..



Alex Eames over at Raspi.TV got his hands on a prototype, here's what he did!
https://youtu.be/LJDEV7rGwaM

And here's a fantastic unboxing video from Average Man vs Raspberry Pi!
https://youtu.be/KPYWNXiItwo

And another review! This time from TheRaspberryPiGuy! Thanks Matt!
https://youtu.be/TMjd0UrH2PY



R399.90  Inc VAT
Diagonal electronic cutting pliers thin mouth (thin mouth cutter)
Description:

The pliers is designed with a flat mouth, and tight knife edge.
It can easily cut all kinds of soft material below 1.2mm thickness. Wire under 0.8MM.
Suitable for cutting wires, electronic feet, trimming plastic parts etc.

Package Includes:

1 x electronic parts cutting pliers
R95.90  Inc VAT
Educational My First DIY motor Kit (My first motor kit)
Description:

Constructed of high quality material, durable and safe.
Mini motor model toy, a device for converting electrical energy into mechanical energy.
A series of physical science broaden kids and children's horizon, stimulating their curiosity.

Specifications:

Type: Motor Toy
Material: ABS, Electronic Components
Features: Durable, Energy Conversion Learning, Easy to Assemble, Miniature Size
Size: 60mm x 52mm x 37mm (Approx.)



Package Includes:

1 x Motor  toy model
1 x Plastic propeller
R119.90  Inc VAT
Electronics kit 1 for Raspberry Pi Pico (MM Electronics kit1 Pico)
Description:

This low-cost simple to use electronics kit will teach you electronics and coding with your Raspberry Pi Pico. (or Pico with presoldered headers)

Build ten great projects including: A touch switch, a thermometer, a light meter and lie detector and much MORE !

Specifications: 

 - Dimensions and Weight (closed box)
 - Units Length 120 mm
 - Width 105 mm
 - Height 35 mm Weight 95 g

What's in the box ?

1 x Solderless Breadboard 400 point
10 x Male to male jumper wires
1 x Micro-servomotor and accessory bag
2 x Strip of 0.1inch 20way header pins
5 x 470Ω resistor
2 x 1kΩ resistor
1 x 4.7MΩ resistor
2 x Red LED
1 x RGB LED (10mm)
2 x Tactile push switch (2 pin)
1 x Phototransistor
1 x Piezo buzzer


Resources:

Instructions (PDF) 
Datasheet (PDF) 















R259.90  Inc VAT
Project Box 1 for Raspberry Pi (Project Box 1 for RPi)
Description:

The Project Box for Raspberry Pi contains all the components needed, together with easy to follow instruction cards, in order to complete 10 simple projects involving LEDs, thermistor, phototransistor and switches and is an ideal starting point for anyone new to electronics and the Raspberry Pi.


Specifications:

This kit is an improved and updated version of the now retired Electronics Starter Kit for Raspberry Pi

A 40 page booklet by Simon Monk (author of the Raspberry Pi Cookbook and Programming Raspberry Pi) is free to download and explains how to use the kit and build the projects.


What's in the box ?

1 x Solderless breadboard
1 x Male to male jumper wires
1 x Female to Male Jumper Wires
1 x Raspberry Leaf 
5 x 470Ω resistor (yellow, purple, brown stripes)
2 x 1kΩ resistor (brown, black, red)
1 x 4.7MΩ resistor (yellow, purple and green stripes)
1 x 330nF capacitor
2 x Red LED – the longer lead is the (positive) lead
1x RGB LED – the longest lead is the – (negative) lead
2 x Tactile push switch
1 x Phototransistor
1 x Thermistor
1 x Buzzer

Raspberry Pi is NOT INCLUDED


Resources :

Instructions (PDF)





















R249.90  Inc VAT
3D Christmas Tree DIY Kit Red/Green/Yellow LED Flash Circuit Kit (3D DIY Christmas tree)

Description:

Awesome and fun, for adults and kids, this is a seasonal must if you're into your electronics and gadgets. This circuit is composed of 16 pcs LED (light emitting diode). The 16pcs LED divided into four groups, and each group has different flashing frequencies, when four groups flash together, this item looks like a small Christmas tree. The circuit is powered by a 9V battery.

Specifications:

This circuit is simple and practical, low power consumption. It uses integrated circuits for driving: fewer parts, and the line is simple and easy to understand.

External Wiring Kit:

With USB plug for easy replacement of parts at any time and conducive circuit debugging. Also allows us to deepen our understanding of the principles of the circuit in the debugging process.

 This project is in the form of an oscillation circuit by the cycle generated by the following principles:

  • After the first charge, the capacitor C1 & C4 charging is complete.
  • Capacitors C2 & C3 will continue to charge.
  • When the transistor Q1 & Q4 is turned on at the same time, it discharges the capacitor C1 & C4.
  • Capacitors C2 & C3 is fully charged, the transistor Q1 & Q4 will be closed, while also charging the capacitor C1 & C4 again.
  • Transistors Q2 & Q3 is turned on while the capacitor C2 & C3 will be discharged.
  • By analogy, the flash of speed is the oscillation frequency, and the frequency is determined by the resistor R & capacitance C values.
Board Size:70mm x 110mm



What's in the box ?

A cool addition to the new era of Christmas
R159.90  Inc VAT
Per Page      1 - 20 of 27