Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Tracking Robot Car Electronic DIY Kit With Reduction Motor (DIY track robot kit)
Description:

This kit introduces quite a few electronic principles, its fun and not difficult to build. This is a self-build DIY smart tracking robot car kit. It is an introductory electronic kit designed to help kids, electronic enthusiasts, and novices learn about basic electronic knowledge like soldering and simple circuits(photoelectric sensor circuit, voltage comparator, motor driving,ir sensors etc.) The smart kit is designed based on the principle of infrared sensor and light reflectivity difference when the light emitting on the white and black items




The assembly steps:


Step 1: Welding circuit

Soldering part is simpler, welding sequence according to the principle of component level from low to high, the first welding eight resistance, is important to use multimeter to confirm resistance is correct, D4, D5 R13 R14 can temporarily not welding, integrated circuit chips can temporarily not inserted

Step 2: Mechanical assembly

The red line is connected to the 3V positive power supply, the yellow line grounding, excess wire an be used for motor wire.

Step 3: The installation of a photoelectric circuit

Photosensitive resistance and light-emitting diodes (note polarity) is reverse-mounted on the PCB, and the ground distance is about 5 mm, both photosensitive resistance and light-emitting diodes are 5 mm distance. Finally, you can power test.

Step 4: Vehicle debugging

The right direction is along the universal wheel direction, if you press and hold the left photoresistor, the wheels on the right side of the car should be rotated. Press and hold the right photoresistor, the wheels on the left side of the car should be rotated, if the car driving back, can also exchange the wiring of two motors, if the one side normal and the other side back up, as long as you can swap wiring of back side.

Note: We don't supply any manuals please note this before you buy it.

Package includes:

1 x Electronic DIY Kit (batteries are not included)



R169.90  Inc VAT
5V TCRT5000 Infrared Line Tracking Sensor Module (line track sensor)
Description:

The TCRT5000 is an IR sensor unit. It has both a Photodiode and a Phototransistor coupled in its package. This sensor can be used to detect the presence of object or any other reflective surface in front it, also with some level of programming it can also calculate the distance of the object in front it.

Features:

Size: 3.5 x 1cm
Power supply: 5V DC
Detector distance: 10mm
Build-in Tcrt5000 Sensor NSOR
Applicable to a variety of platforms including Arduino / AVR / ARM /PIC

Package includes:

1 x Tracking Sensor Module

Build A Line-following robot
R23.90  Inc VAT
Five Channel Infrared Line Tracking Sensor (5 channel line track sensor)
Features:

- Using the ITR20001 Reflective Photoelectric Sensor
- Five ITR20001/T infrared light detectors are used with higher sensitivity, wider detection range and anti-interference.
- Five-channel analog output, higher accuracy, so that the tracking range of the car is wide and stable

Connection Reference:

VCC: Connect 3.3~5V
GND: Connect GND
U1: Connect MCU.IO(Channel, analog output)
U2: Connect MCU.IO(Channel, analog output)
U3: Connect MCU.IO(Channel, analog output)
U4: Connect MCU.IO(Channel, analog output)
U5: Connect MCU.IO(Channel, analog output)

Specifications:

Operating voltage: 3.3V~5V
Product size: 72mm x 28mm
Probe spacing: 11mm
Fixing hole size: 5mm
Sensing distance: 10mm~50mm

Note:
*Please allow 1-3mm difference due to manual measurement.

Package Includes:

1 x  Infrared Tracking Sensor 
R188.62  Inc VAT
R249.90
Avoidance tracking Smart Robot Car Chassis Kit Speed Encoder Battery Box 2WD Ultrasonic module For Arduino kit (Aduino robot car)
Please Note: Some drilling will be required. You might need to add a few standoffs and screws to build it the way you want it.
Description:

This complete robot car kit includes the arduino as well. Just add batteries and code. Great for beginners to learn how to code using sensors and motion on the Arduino boards

Pdf manual available at http://www.cs.columbia.edu/~sedwards/presentations/robot-car-instructions.pdf 
Get more details at https://create.arduino.cc/projecthub/hda-robotics/project-1-2wd-obstacle-avoiding-robot-390ef8

Package Includes: 
  • Car chassis x 1 
  • Car Wheels x 2 
  • DC Gear Motor x 2 
  • 20 line gun code disk x 2 
  • Fasteners (high intensity black acrylic) x 4 
  • Caster x 1 
  • Four battery box x 1 
  • Quality Rocker Switch x 1 
  • Assembly drawing x 1
  • Several screws and nuts
  • V5 shield x 1
  • UNO R3 x 1
  • SG90 x 1
  • FPV x 1
  • L298N x 1
R599.90  Inc VAT
Per Page      1 - 4 of 4
  • 1