Search
Search Criteria
Products meeting the search criteria
Description
- This is the hard drive and operating system for your Raspberry Pi
- Extended partition to make full use of the SD card
- Ready to use – plug it in and you’re ready to go
- Only the most current stable release of the operating system will be used
- High quality MicroSD card
Latest image and tools are available from the Raspberry Pi Foundation Downloads
- Greatly improves sound quality and volume
- Only takes a minute to configure
- Wire Length: 139.7mm / 5.5"
- Audio Card Dimensions: 43.76mm / 1.72" x 23.19mm / 0.91" x 11.97mm / 0.47"
Tutorials:
It is a neat and very useful solution for using a VGA display/monitor with your Raspberry Pi and is cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (using a parallel interface) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080p60 VGA video with no CPU load. It is also possible to drive this interface at the same time as the HDMI connection, so a dual screen set up is also possible.
This add-on board uses all but 6 of the GPIO pins so it may not be possible to use other add-on boards at the same time as the VGA adapter. You should disable all of the GPIO pin's function so that it can work properly.
We strongly recommend that you use 800x600 resolution. Higher resolution will slow down your Pi and use more RAM.
Features:
- Support for Raspberry Pi 3B / 2B / B+ / A+
- The VGA output supports resolution:from 640 x 480 up to 1920 x 1024 at 60fps.
- With 6 bits per channel you have a maximum of 262144 colours.
- No soldering required.
- Easy to setup.
- Easy to configure.
- Dimension: 64.00mm x 32.3mm
- Net weight: 16.5g
Note:
Raspberry Pi main board is not included.
More about this item: http://wiki.52pi.com/index.php/VGA666_Module_For_RPi_SKU:EP-0073
Package includes:
1 × VGA Adapter Board
Description:
This is a DC 9V Battery Button Power Cable Tieline For Arduino
Package includes:
1 x DC 9V Battery Button Power Cable
Specification:
Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your projects
Black cable-----GND
Green cable----TXD
White cable----RXD
Red cable ---- VCC (5V)
Package includes:
1 x USB to RS232/TTL PL2303HX cable adapter module
Want to hook your Raspberry Pi Zero up to your HDMI Monitor? You'll need this Mini-HDMI to full size HDMI adaptor!
This one's in white, and comes with gold plated connectors!
Adaptor Guide:
Pi Zero ==> Mini HDMI (Male) to HDMI (Female) Adaptor ==> HDMI Cable ==> Monitor
Features:
- Mini HDMI Male to HDMI Female
- Gold plated connectors for flawless signal transference
- CE and ROHS Compliant
- For the Raspberry Pi Zero
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port so you can plug in your mouse, keyboard or any other required peripherals! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client (slave) device! This one's in white!
Features:
- Micro USB B (Male) to USB A (Female)
- OTG On-The-Go Host Cable
- CE and ROHS Compliant
- For the Raspberry Pi Zero
Simple & Professional appearance for power cabling
Easier for camera installation, save time and more securer cable connection
5.5mm x 2.1mm Female power plug connector
Clearly marked positive and negative to avoid reversal.
Package Includes:
1 x Pair Male Female 12V DC Power Plug Jack Adapter Connector
This kit comes with handy adapters for the mini-HDMI and micro-B USB On-The-Go ports of your new Raspberry Pi Zero!
You'll need these adapters to connect your Raspberry Pi Zero to normal HDMI screens and USB devices (like a keyboard or WiFi dongle).
Kit contents:
- mini-HDMI-to-HDMI adapter
- micro-B-to-female-A USB cable
- 2x20 pin male to male GPIO header
(1) The USB Hub can not used to charge your phone or power portable drives. You'll need a hub with a bigger power supply. This hub is used for extra USB data ports.
(2) The specifications of the power supply is 5V 900mA
Features ：
1. 7 -port USB 3.0 hub with super speed transfer, reasonable interface layout, non-interfering
2. Each USB port has an LED indicator
3. Support overload voltage and instantaneous current protection, effective protection for connected devices and HUB itself
4. Comply with USB 3.0 specifications that supports high-speed 5Gbps bandwidth transmission, and backward compatible with USB2.0 / USB1.1
Package Includes:
1x 7 Ports USB 3.0 HUB
1x USB Cable
1x AC Adapter (EU Plug)
Color: black
Number of pins: 28 pins (14pins / row x 2 rows)
Pin length: 2.9mm
Pitch: 2.54mm
Row to row distance: 7.62mm
Dimension: 35 x 10 x 8mm (L x W x H)
Contact termination through hole
Contact type dual wipe contact
Package includes:
1 x 28 Pins IC Sockets
Color: black
Number of pins: 8 pins
Pin length: 2.9mm
Pitch: 2.54mm
Row to row distance: 7.62mm
Dimension: 10mm x 10mm x 8mm (L x W x H)
Contact termination through hole
Contact type dual wipe contact
Package includes:
1 x 8 Pin IC sockets
- This item is a Universal 12V 2A external switching power adapter.
- Power supply polarity : Inside positive outside negative,inside x(+) outside i(-).
- Input : 100-240V AC 50/60Hz
- Output : 12V 2A
- Cable length : 90 cm
- DC Plug Dimension : 5.5mm * 2.5mm
- Plug : EU Plug
1 x 12V 2A Power Adapter
Features:
Chip: FT232RL
Draw out all signal port of FT232RL chip
RXD / TXD transceiver communication indicator
USB power supply, can choose 5V or 3.3V, set by jumper
With over current protection, using 500mA self-restore fuse
Pin definition: DTR, RXD, TX, VCC, CTS, GND
Pitch: 2.54mm
Size: 36 x 18mm (L x W)
Interface: Mini USB
The USB to TTL serial adapter is based on the high quality and very popular FTDI FT232RL chipset and is an excellent way to connect TTL serial devices to a PC through a USB port.
This USB to TTL serial adapter is ideal for many uses, including:
Programming microprocessors such as ARM, AVR, etc
Working with computing hardware such as routers and switches
Serial communication with many devices such as GPS devices
Serial terminals on devices like the Raspberry Pi
Unlike most USB to TTL serial adapters, this adapter supports both 5V AND 3.3V operation! Simply set the jumper as required to choose between 5V and 3.3V as labelled on the board.
The adapter comes with a right-angle connector fitted allowing you to use it straight away. If you need to access any of the other inputs or outputs of the FT232RL, all the useful signals are provided as through-hole solder pads - ideal for use with straight headers into a breadboard, for example.
Package includes:
1 x FT232RL USB to serial converter module
Description:
The Pi zero Enc28j60 is a simple Network Adapter module for Pi zero.
It is very easy to assemble and configure.
It allows your Raspberry Pi zero to access the network.
Features:
1. Easy to assemble and setup2. Official OS overlay support
3. Stable and fast
How to configure it:
1. Install the NIC module into the raspberry Pi.
2. Connect the network cable and ensure that your router supports DHCP.
3.Burn the Raspbian image to TF card.
4. Edit the /boot/config.txt file with your favorite editor such as "Nano" or "vim.tiny", and add the following parameter:
dtoverlay=enc28j60
Then save and exit. Reboot the raspberry Pi.
NOTE: The module has been tested only in the Raspbian OS environment.
How to check if network adapter works:
Open a terminal and type this command: ifconfig
Package includes:
1x Pi zero Enc28j60 Network Adapter Module
Please note this is the adapter only. Micro SD card is not included
Please Note:
You will need to solder 3V regulator by yourself.
ESP07, ESP08, ESP12 module boards are not included.
Package includes:
1 x Serial Port WIFI ESP8266 Module Adapter Plate
2 x Pin headers
This module is designed specifically for the Raspberry Pi IO expansion Modules, which can effectively solve the issue of Raspberry send IO port. Module uses four 74HC595 chips to expand 32 IO ports, the top of the module will expand the IO of Raspberry Pi again that can be cascaded for more IO expansion modules with theoretically unlimited expansion.
Features:
--Expanded 32 GPIO
--Infinity expansion by adding more modules
--Use wiring PI API,sample code
Port:
--Raspberry Pi 2*13port
--Raspberry Pi 2*13 cascade port
--Q0-Q31 expanded IO port
Product Parameters:
--Working voltage:2.4v-5v
--IO voltage:3.3v
--Expanded 32 unidirectional IO
--Connection through SPI
--100 MHz (typical) shift out frequency
--8-bit serial input
--8-bit serial or parallel output
--Specified from -40C to +85C and from -40C to +125C
Typical Application:
--Drive a lattice screen
--Driver numeric display
--Drive matrix LED
How to Use:
Insert the module that the silk screen says 'RPI IN'. Pay attention don’t make the direction reversed! The correct direction of insert module is above the Raspberry Pi’s PCB; The 8*4header in the module are Q0-Q31 expanded GPIO, they can connect to the peripheral through the Dupont Line. The header which near silk screen write 'EXT' expand GPIO of Raspberry Pi, user can cascade the other module or the same module.
Package Includes:
1x Raspberry pi IO expansion board
Ever wanted to use two different operating systems with the same Pi at the flick of a switch? Well now you can!
This 2 in 1 micro SD card switcher is specially designed for the Raspberry Pi, and you can now enjoy the convenience of using two micro SD cards at the same time on the same Pi!
To transfer between your operating systems, insert two micro SD cards into the adaptor (one on top, and one at the bottom, Then ensuring the Pi is switched off and power removed, switch the switch on the adaptor! Next time you boot, it will boot the secondary micro SD card!
2 in 1 Dual Micro SD Switcher for Raspberry Pi Features:
- Designed for Raspberry Pi B+/2/3/Zero
- Dual micro SD card slot with switch
- Enables the use of two operating systems on the same Pi without needing to remove/swap the micro SD cards.
- Dimension: 36mm(length) x 24mm(width)
During testing we noticed that both micro SD cards have to be inserted for the unit to operate.
