Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Need more pins to control that LED matrix?
R5.50  Inc VAT
If you thought bulk is better then here is your proof. 6 Pack mini breadboard in different colours for your DIY electronic projects.
R159.90  Inc VAT
R37.90  Inc VAT
This board is what you need to start your journey with arduino. Loads of projects with examples available
R84.90  Inc VAT
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
R189.90  Inc VAT
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
R241.10  Inc VAT
This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.
R499.90  Inc VAT
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
These are the replacement blades for the arcade buttons
R7.90  Inc VAT
For use with arcade joysticks that use header cables
R84.90  Inc VAT
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit (adaf 16 servo control)

Control 16 Servos with perfect timing!

This HAT can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.

For use with Raspberry Pi Model A+ or B+, can be used with the Model A or B if you use a tall 2x13 header instead of the included 2x20.

  • drive up to 16 servos or PWM outputs over I2C with only 2 pins.
  • The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead.
  • stack up to 62 HATs to control up to 992 servos - all with the same 2 pins!

Best of all, Adafruit even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation com to life. The Adafruit PWM/Servo HAT is the perfect solution for any project that requires a lot of servos or PWM outputs! Check out Adafruits detailed tutorial for lots more information including diagrams, schematics, installation instructions and more

Each order contains

  • a Servo HAT
  • a 2-pin terminal block
  • four 3x4 headers
  • a 2x20 socket header

You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board. If you would like to stack multiple HATs onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead.

Please note! This kit does not come with Raspberry Pi, servos, or required 5V power supply.

R399.90  Inc VAT
74HC595N DIP-16 8 Bit Shift Register IC (74HC595N IC Shift Register)
Specifications:

74HC 595N IC
Bits: 8
Pin: 16
Logic family: HC
Logical function: shift register
Output type: 3-State
Propagation delay time: 285ns
Operating supply voltage (Typ): 2.5V / 3.3V / 5V
Operating temperature: -55°C ~ 125°C
Operating supply voltage (Min): 2V
Operating supply voltage (Max): 6V


Integrated circuit with small size and light weight, high reliability for improving the reliability of equipment.

Package includes:

1 x 74HC595N 8 bit shift register IC

Driving the Shift register
Need more pins to control that LED matrix?
R5.50  Inc VAT
127pcs 7 Sizes Polyolefin Halogen-Free Heat Shrink Tube Sleeving Kit (Black heat shrinkkit)
Collection of heat shrink tubing,7 Sizes.
Supplied internal diameter: 2.0mm, 2.5mm, 3.5mm, 5.0 mm, 7.0 mm, 10.0mm, 13 mm
Fully shrunk internal diameter: 1.0mm, 1.25mm,1.75mm, 2.5mm, 3.5mm, 5mm, 6.5mm

Specifications:
Color: Black
Total Length: 7.28m
Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter)
Material: Polyolefin
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +110°C maximum
Operating Temperature: -55°C to +125°C
Tensile strength: 10.4 Mpa
Dielectric strength: 15 kV/mm
Manufacture specification: ISO9001
Flammability: Flame Retardant
Approvals: UL Approved
Supplied format (round or flat): Product is supplied flat
Cutting method: Scissors or sharp knife
 
Package includes: 
 
1 x Heat Shrink Kit
R114.90  Inc VAT
Drillpro DB-M1 10pcs 0.8-3mm Titanium Coated Engraving Milling Cutter Carbide Bits (10 0.8-3mm routor bit case set)
Specifications:
Brand: Drillpro
Model: DB-M1
Material: Carbide (tungsten steel)
Surface Treatment: Titanium Coated
Shank Diameter: 3.175mm
Cutting Edge Diameter: 0.8-3mm ( 0.8,1.0,1.2,1.4,1.6,1.8,2.0,2.2,2.4,3.0mm)
Cutting Edge Length: 12mm
Overall Length: 37mm
Quantity: 1set (10pcs)
 
Features:
1. use of ultra-fine grain carbide material with good milling, cutting performance, ensure high work efficiency;
2. have sufficient bending strength and wear resistance; High hardness, high wear resistance, high strength;
3. sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches.
 
Application:
PCB,SMT, CNC, Mould, pastic fiber, carbon fiber, super hard wood, printed circuit board, other precision parts processing.
 
Package Includes:
10 x bits
R229.90  Inc VAT
170 Points Mini Breadboard bulk pack(6PCS) (Mini breadboard bulk pack(6))
ColorRed + blue + black + white + green + yellow
MaterialABS
Size170 tie points
Application
  • Self-adhesive tape on the back, make it easy to stick on a Prototype Shield.
  • Perfect for DIY projects
Packing List6 x Mini breadboards

Please note: Pic is for illustration purposes only. The breadboards may not have the snapping clips
If you thought bulk is better then here is your proof. 6 Pack mini breadboard in different colours for your DIY electronic projects.
R159.90  Inc VAT
Wheel For Robot Chassis (rear chassis wheel)
Wheel diameter: 30mm
Height: about 34mm

Package Included:
1 x car wheel
R37.90  Inc VAT
6mm Shaft Hole Plastic Potentiometer Knob Black (Potentiometer knob)
Ideal for use with our range of potentiometers.

Knob top diameter : 11 mm / 0.43 inch
Knob base diameter : 14.5mm / 0.57";
Shaft insert diameter : 6 mm / 15/64"
Knob total height : 14 mm / 0.55 inch
Main color : black, white;
Weight : 12G
Quantity : 1 knob

Resources:
Python Library
Definition, Types, And Working Principle
R8.90  Inc VAT
Multi-functional Learning Expansion Board for Arduino (Arduino multi-function board)
Features:

  • - This is an open-source code base and Simple I/O platform, and with the use of a similar java, C language development environment. You can quickly use the language with Flash or Processing ... and other software to make interactive projects. Can be used to complete the development of electronic projects such as Switches, Sensors or other controllers, LED, stepper motors or other output devices. It can also operate independently as a software platform that can communicate with.
  • - 4-way LED indicator
  • - DS18B20 temperature sensor interface that can be used to measure temperature, this board does not include the DS18B20 sensor
  • - LM35 temperature sensor interface that can be used to measure temperature of the experiment, this board does not include the LM35 sensor
  • - 3296 precision adjustable potentiometer, analog input port (can be used for controlling LED brightness, steering angle , digital voltage, etc.)
  • - integrated infrared receiver that can fit any infrared remote control experiments , this board does not include the receiver
  • - four digital 7 segment display (using 74HC595 driver provincial IO learning SPI), for digital display experiments (can display temperature, voltage, counter value, etc.).
  • - three separate buttons.
  • - buzzer
  • - Bluetooth, wireless interfaces, voice module , voice recognition module can be used for wireless communication experiment.
  • - servo interface, easy to drive servos.
  • - infrared detection interface

Code examples available below
http://arduinolearning.com/code/multi-function-shield-examples.php

http://www.cohesivecomputing.co.uk/hackatronics/arduino-multi-function-shield/

files.cohesivecomputing.co.uk/Hackatronics-Arduino-Multi-function-Shield.pdf

Package includes:

1 x Multi-function Shield For Arduino
This board is what you need to start your journey with arduino. Loads of projects with examples available
R84.90  Inc VAT
WS True color RGB LED PHAT for Raspberry Pi (WS RGB LED PHAT)

Overview

This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.

Features

  • Supports any revision of Raspberry Pi (directly plugable)
  • Onboard 4 × 8 RGB LED (WS2812B)
  • Control pin is configurable via jumpers (0Ω resistor)
  • Break out control pins, easy for working with other MCUs
  • Comes with development resources and manual (examples in Python and Web control)

Specifications

  • Operating voltage: 5V
  • Brightness: adjustable 256 levels
  • Color depth: 24-bit true color (8-bit for R/G/B respectively, totally 256x256x256=16777216 colors)
  • Data rate: 800Kbps(typ)
  • Dimension: 65mm × 30.2mm
  • Mounting hole size: 3.0mm

How to Use

In the case of working with a MCU:

  • 5V ↔ 5V power
  • GND ↔ GND
  • DIN ↔ Signal input
  • DOUT ↔ Signal output (optional)

Development Resources

Wiki : www.waveshare.com/wiki/RGB_LED_HAT

This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
R189.90  Inc VAT
WS .RGB LED HAT for Raspberry Pi, colorful display, 8 × 8 grid (WS RGB LED HAT)

Overview

This RGB LED HAT (B) can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.

Features

  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Onboard 8 × 8 RGB LED (WS2812B)
  • Control pin is configurable via jumpers (0Ω resistor)
  • Break out control pins, easy for working with other MCUs
  • Comes with development resources and manual (examples in Python and Web control)

Specifications

  • Operating voltage: 5V
  • Brightness: adjustable 256 levels
  • Color depth: 24-bit true color (8-bit for R/G/B respectively, totally 256x256x256=16777216 colors)
  • Data rate: 800Kbps(typ)
  • Dimension: 65mm × 56.2mm
  • Mounting hole size: 3.0mm

How to Use

In the case of working with a MCU:

  • 5V ↔ 5V power
  • GND ↔ GND
  • DIN ↔ Signal input

Development Resources

Wiki : www.waveshare.com/wiki/RGB_LED_HAT_(B)

This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
R241.10  Inc VAT
WS GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi (WS GSM/GPRS/GNSS/Bluetooth)

Please note: Raspberry Pi and micro SD in pic not included

Overview

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.

It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.

Features

General

  • Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • Bluetooth 3.0, supports data transferring through Bluetooth
  • Onboard USB TO UART converter CP2102 for UART debugging
  • 6x LEDs for indicating the module working status
  • SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder
  • Baudrate auto detection (1200bps ~115200bps)
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

GSM/GPRS

  • Band
    • GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
    • Quad-band auto search
    • Compliant to GSM phase 2/2+
  • Emitting power
    • Class 4 (2W @ GSM 850/EGSM 900 MHz)
    • Class 1 (1W @ DCS 1800/PCS 1900 MHz)
  • GPRS connectivity
    • GPRS multi-slot class 12 (default)
    • GPRS multi-slot class 1~12 (configurable)
  • GPRS data feature
    • Downlink speed: max 85.6kbps
    • Uplink speed: max 85.6kbps
    • Coding schemes: CS-1\CS-2\CS-3\CS-4
    • Supports PAP (Password Authentication Protocol) for PPP connection
    • Supports PBCCH
    • Supports USSD
  • SMS
    • Supports: MT/MO/CB/Text/PDU mode
    • SMS storage: SIM card
  • Audio
    • Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate
    • Supports echo cancellation
    • Supports noise reduction

GNSS

  • Receiver type
    • 33 tracking channels
    • 99 acquisition channels
    • GPS L1 C/A code
  • Sensitivity
    • Tracking: -165 dBm
    • Cold starts : -148 dBm
  • Time-To-First-Fix
    • Cold starts : 28s (typ.)
    • Hot starts : < 1s
    • Warm starts: 26s
  • Accuracy
    • Horizontal position : <2.5m CEP

Bluetooth

  • Integrates AT commands
  • Compliant to Bluetooth specification3.0 + EDR
  • Supports SPP, OPP, HFP/HSP, etc.

Misc

  • Operating voltage: 5V
  • Operating temperature: -40°C ~ 85°C
  • Storage temperature: -45°C ~ 90°C
  • Dimensions: 30.2mm x 65mm

What's on Board

  1. SIM868 module
  2. ZMM5V1: regulator diode
  3. SMF05C: TVS diode
  4. CP2102: USB TO UART converter
  5. MP1482: power chip
  6. NDC7002N: voltage level translator
  7. GPS status indicator
  8. NET indicator:
    • flashes fast when the module starts up
    • flashes slowly after GSM register succeed
  9. STA module working status indicator
  10. SIM868 UART Tx/Rx indicator
  11. Power indicator
  12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
  13. Raspberry Pi GPIO connector
  14. SIM card slot
  15. USB TO UART interface
  16. 3.5mm earphone/mic jack
  17. GNSS antenna connector
  18. Bluetooth antenna connector
  19. GSM antenna connector
  20. CR1220 battery holder: for RTC backup battery
  21. UART selection switch
    • A: control the SIM868 through USB TO UART
    • B: control the SIM868 through Raspberry Pi
    • C: access Raspberry Pi through USB TO UART

Development Resources

Wiki : www.waveshare.com/wiki/GSM/GPRS/GNSS_HAT

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.
R499.90  Inc VAT
LM8UU 8mm Linear Ball Bearing for CNC (LM8UU 8mm Linear Bearing)
Specifications : 

Brand new and excellent quality material.
Linear bearing ball cage, hardened coat of both ends ring.
Made of carbon chromium bearing steel, safe and reliable.
Ball in the cage loop to run a smooth ball guide surface to ensure stability even if high-speed.

Model : LM8UU
Shaft ID : 8 mm
Shaft OD : 15 mm

Package Includes : 

1 x LM8UU Bearing
R49.90  Inc VAT
Arcade button blade type RED (RED Arcade blade button)
Arcade button blade type

LENGTH: 6,2 cm
WIDTH: 3,7 cm
CIRCUMFERENCE: 19 cm
WEIGHT : 40g

This button works using blades instead of micro switches.
The blades are replaceable and available as listed parts.
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
Arcade button blade type YELLOW (YELLOW Arcade blade button)
Arcade button blade type

LENGTH: 6,2 cm
WIDTH: 3,7 cm
CIRCUMFERENCE: 19 cm
WEIGHT : 40g

This button works using blades instead of micro switches.
The blades are replaceable and available as listed parts.
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
Arcade button blade type BLUE (BLUE Arcade blade button)
Arcade button blade type

LENGTH: 6,2 cm
WIDTH: 3,7 cm
CIRCUMFERENCE: 19 cm
WEIGHT : 40g

This button works using blades instead of micro switches.
The blades are replaceable and available as listed parts.
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
Arcade button blade type PURPLE (PURPLE Arcade blade button)
Arcade button blade type

LENGTH: 6,2 cm
WIDTH: 3,7 cm
CIRCUMFERENCE: 19 cm
WEIGHT : 40g

This button works using blades instead of micro switches.
The blades are replaceable and available as listed parts.
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
Arcade button blade type WHITE (WHITE Arcade blade button)
Arcade button blade type

LENGTH: 6,2 cm
WIDTH: 3,7 cm
CIRCUMFERENCE: 19 cm
WEIGHT : 40g

This button works using blades instead of micro switches.
The blades are replaceable and available as listed parts.
Building your own arcade? These buttons are just what you need for your DIY project. Available in different colours.
R15.90  Inc VAT
REPLACEMENT BLADES FOR BLADE TYPE ARCADE BUTTONS (Blades for arcade buttons)
Spare blades for the blade type arcade buttons
Easy to replace.
These are the replacement blades for the arcade buttons
R7.90  Inc VAT
GY-BNO055 9DOF 9-axis BNO055 Sensor (9 axis sensor)
Features:
 
Module Model: GY-BNO055
Use the chip: BNO-055
Power supply: 3-5v (internal low voltage regulator)
Communication method: standard IIC / serial communication protocol
Module size: 12mm x 20mm
 
Applications:
 
Bosch Sensortec BNO055 Intelligent 9-Axis Absolute Orientation Sensor is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit ARM Cortex M0+ microcontroller running Bosch Sensortec sensor fusion software, in a single package. The corresponding chip-sets are integrated into one single 28-pin LGA 3.8mm x 5.2mm x 1.1mm housing. For optimum system integration the BNO055 is equipped with digital bidirectional I2C and UART interfaces. The I2C interface can be programmed to run with the HID-I2C protocol turning the BNO055 into a plug-and-play sensor hub solution for devices.

Package Includes:

1 x BNO055 Sensor Module

Usage:

Adafruit learning

Change -> bno = BNO055.BNO055(serial_port='/dev/ttyAMA0', rst=18)

To -> sensor = adafruit_bno055.BNO055(rst=17, address=0x60) # the address obtained with i2cdetect -y 1

R349.90  Inc VAT
5P Cable for Arcade Game Controller Joystick (Joystick ribbon cable)
Features:

Length: 20cm
For use with arcade joysticks that use header cables

Package Includes:

1 x 5P Cable
For use with arcade joysticks that use header cables
R84.90  Inc VAT
Per Page      201 - 220 of 751