Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
R34.90  Inc VAT
8-Channel 3.3V to 5V Voltage Converter Module for Raspberry Pi - Blue (8ch blue convert logic)
Raspberry Pi and jumper cables are not included.

Highlights:

- Mutual conversion between 3V and 5V, It's convenient for PI connected to external 5V sensors or modules

- Supports total of 8 channels

- Range of voltage converted: 1.8V~6VDC

How to Use:
In the case of translating between 3.3V and 5V system:
VCCA connects to 3.3V power supply
VCCB connects to 5V power supply
GND connects to power negative pole respectively, the two power supply should be common-grounded with each other
When Ax has 3.3V input, Bx will get 5V output
When Bx has 5V input, Ax will get 3.3V output
NO direction control required
R39.90  Inc VAT
FLIRC V2 - RPi USB XBMC IR Remote Receiver (Flirc IR receiver)

The FLIRC USB dongle allows the use of any remote control with your Raspberry Pi. Configure the device on your desktop PC, then simply plug into your Pi for a perfect media centre companion! Amaze your friends and family when the tiny box stuck to the back of your TV controls your entire media collection using an old DVD remote!

New Flirc Version 2 is smaller, lighter and much more professional!

FLIRC learns from any remote control, not caring about different vendor protocols. Just walk through the super simple setup - pairing individual remote buttons with 'Media Centre Buttons' and you're done. It's basically a universal IR receiver, so can be used with any remote you choose, old, new or Universal! The best part about FLIRC is that it can be used to mimic a keyboard so every media center application understands it without any drivers. You can map all keyboard functions to a remote using FLIRC - it's very cool! FLIRC runs across all platforms including the Raspberry Pi, so you can use it on your PC, laptop or Mac!
 
Tutorials
 
We've written an entire step by step guide for FLIRC which includes:
  • Setting up OSMC (XBMC) media operating system on the Raspberry Pi.
  • Setting up your FLIRC module and porting it to any remote.
  • Putting it all together!
  • More advanced FLIRC programming - porting an entire keyboard to a remote!

R389.90  Inc VAT
Tracking Robot Car Electronic DIY Kit With Reduction Motor (DIY track robot kit)


Tracking Robot Car Electronic DIY Kit With Reduction Motor





The assembly steps:


Step 1: Welding circuit

Soldering part is simpler, welding sequence according to the principle of component level from low to high, the first welding eight resistance, is important to use multimeter to confirm resistance is correct, D4, D5 R13 R14 can temporarily not welding, integrated circuit chips can temporarily not inserted

Step 2: Mechanical assembly

The red line is connected to the 3V positive power supply, the yellow line grounding, excess wire can be used for motor wire.

Step 3: The installation of a photoelectric circuit

Photosensitive resistance and light-emitting diodes (note polarity) is reverse-mounted on the PCB, and the ground distance is about 5 mm, both photosensitive resistance and light-emitting diodes are 5 mm distance. Finally, you can power test.

Step 4: Vehicle debugging

The right direction is along the universal wheel direction, if you press and hold the left photoresistor, the wheels on the right side of the car should be rotated. Press and hold the right photoresistor, the wheels on the left side of the car should be rotated, if the car driving back, can also exchange the wiring of two motors, if the one side normal and the other side back up, as long as you can swap wiring of back side.

Note: We don't supply any manuals please note this before you buy it.

Package includes:

1 x Electronic DIY Kit (batteries are not included)





R199.90  Inc VAT
Official Raspberry Pi3B and Pi3B+ Red & White Case (official case Pi3 Red/White)

PLEASE NOTE: Rapsberry Pi not included.

The Official Raspberry Pi 3 Model B Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your RPi 3! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Red and White Colour Combination

  • 5 Part "Snap-Fit" Enclosure

  • Cut-outs for all connection points

  • Micro SD card cut-out

  • Plastic LED light protector

  • Stick on rubber feet for case stability

R129.90  Inc VAT
BMP180 Digital Barometric Pressure Sensor Board Module (Barometric sensor)

Product information
This digital barometer has some interesting applications. By measuring the absolute pressure of the environment and converting this into altitude. you will have a reliable sensor for determining the height of your robot, plane or projectile. This sensor is capable of achieving an accuracy of 1m, with noise of only 17cm in ultra-high resolution. The device will operate at only 0.3uA meaning low current draw for battery powered applications.

Specifications
1.8V to 3.6V Supply Voltage
Low power consumption - 0.5uA at 1Hz
I2C interface
Max I2C Speed: 3.5 MHz
Very low noise - up to 0.02hPa (17cm)
Fully calibrated
Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Weight: 1.18g
Size: 21mm x 18mm

Package includes
1 x BMP180 Digital Barometric Pressure Sensor Board Module
1 x Male to Male 4 pin header

Using the BMP180 with Raspberry Pi

R42.90  Inc VAT
IIC / I2C 1602 Blue Backlight LCD Display Module For Arduino (Blue backlight display)
Power supply voltage: 2.5 - 6V
Supports I2C
Blue back light, contrast can be adjusted
Two line output
Four wire connection

Package included:

1 x LCD Display Module

Setup Guide
R64.90  Inc VAT
Potentiometer single turn carbon linear PCB 2K (potentio 2k)

Single turn 2K

  • Linear
  • Carbon
  • PCB type
  • 5mm pitch pin
  • Spline shaft
  • 17mm diameter
  • 0.2W
  • Shaft length 10mm
  • Shaft diamter 6mm

Resources:
Python Library
Definition, Types, And Working Principle
R9.90  Inc VAT
L9110S H Bridge Stepper Motor Dual DC Driver Controller Module (L9110S small H Bridge)

Description:

There are two L9110S motor controller chips onboard
This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor

Feature:

Work under low static current
Power supply voltage: DC 2.5V - 12V
Each channel has 800mA continuous current output
Low saturation pressure drop
TTL / CMOS output level compatible, can be connected directly to the CPU
Output built-in clamping diode, apply to the perceptual load
Control and drive integrate in IC
Pin high pressure protection function
Working temperature: 0°C - 80°C
Size: 29 x 21mm(L x W)

Circuit diagram:

 


Package includes:

  1x L9110S stepper motor driver

Robot control with Python

This module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
R34.90  Inc VAT
Raspberry Pi Camera Board V2 (8MP,1080p) (RPi Cam 8MP V2)

The Raspberry Pi Camera Module V2 is the new and improved official camera board from the Raspberry Pi Foundation! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor. A 150mm CSI cable is included with every camera.

The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

The Raspberry Pi Camera Board V2 Features:

  • Fixed focus lens on-board
  • 150mm CSI camera cable included
  • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
  • Supports 1080p30, 720p60 and 640x480p90 video
  • Size 25mm x 23mm x 9mm
  • Weight just over 3g
  • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
  • Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system

Note: to use the camera with Raspberry Zero, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Getting started with PiCamera
R499.90  Inc VAT
Raspberry Pi "NoIR" Infrared Camera Board V2 (8MP,1080p) (camera NOIR 8MP)

The NoIR Camera V2 is the “night vision” version of the official camera board released by the Raspberry Pi Foundation. The Raspberry Pi NoIR Camera Board V2 has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi  NoIR Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.

The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

The Raspberry Pi NoIR Camera Board V2 Features:

  • No IR Filter - Great for Low Light Conditions
  • Includes Blue Filter
  • Fixed focus lens on-board
  • 150mm CSI camera cable included
  • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
  • Supports 1080p30, 720p60 and 640x480p90 video
  • Size 25mm x 23mm x 9mm
  • Weight just over 3g
  • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
  • NoIR Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system
Getting started with PiCamera

Note: to use the camera with Raspberry Zero v1.3, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable
R499.90  Inc VAT
Set with 10 cables 42cm 5 colours with booted crocodile clips (croc jumpers set 10)

This bundle contains ten leads with crocodile clips at each end
Two of each of five colour cords: black, green, red, white and yellow
The PVC sleeves on the crocodile clips match the colour of the cables

 

This bundle is ideal for use with your micro:bit

R54.90  Inc VAT
LED RGB Common Cathode 4-Pin F5 5MM Diode (5 pack) (LED RGB (5))
Features:
 
Convenient for DIY projects
Perfect use for home, office and industry electrical equipment and electrical appliances
Current : 3V
Voltage: 20 mA
Size: 5mm 
Light Color: RED, BLUE, GREEN
Total Quantity: pack of 5

Read the Docs
https://gpiozero.readthedocs.io/en/stable/recipes.html#full-color-led
R8.90  Inc VAT
L298N Dual H-Bridge Stepper Motor Driver Board (H Bridge big red dual stepper)
Description:

Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-12V
Logical current: 0mA-36mA
Drive current: 2A (MAX single bridge)
Storage temperature: -20 to +135
Max power: 25W
Weight: 30g
Size: 43 x 43 x 27mm

Note:

This module has a built-in 5v power supply, when the driving voltage is 7v-12v, this supply is suitable as a power supply.
DO NOT connect input voltage to +5v on controller interface.
When ENA is enabled IN1 IN2 control OUT1 OUT2
When ENB is enabled IN3 IN4 control OUT3 OUT4

Note:  Package does not include the board mounting screws.

Package includes:

1 x  L298N Module

Robotic control with python



R49.90  Inc VAT
Raspberry Pi MF Standoff HAT Mounting Kit(11mm) (MF hat mounting kit)

Need to securely mount your Raspberry Pi HAT to your Raspberry Pi? You need our HAT mounting kit!

The 11mm spacers in the kit fit between the Pi PCB and the HAT, and can be secured using the included M2.5 bolts and nuts.

Specifications:

  • 4 x M2.5 x 11mm Male to Female Standoffs
  • 4 x M2.5 Bolts
  • 4 x M2.5 Nuts
R29.25  Inc VAT
13.56MHz RFID Tag For Access System Blue (13.56 RFID tag blue)
Features :

Small and durable
Waterproof, shockproof, anti-corrosive.
Keyring for easy carrying.

Specifications :


Main Chip : Fudan F08 compatible S50
Colour : Blue,Yellow, Black, Green, Red
Size : Approx. 40.5×32×4.2mm
Operating Frequency : 13.56 MHz
Communication speed : 106K Boud
Read and write distance : 2.5 ~ 10cm
Read and write time : 1 ~ 2ms
Operating Temperature : -20 ℃ ~ 85 ℃
Endurance :> 100,000 times
Storage capacity : 8Kbit, 16 partitions, each partition with 2 group passwords

Typical applications :
Enterprise / campus access cards, parking, district management,attendance systems, patrol systems, enterprise systems, access control systems, radio frequency identification field etc.


Package includes :

1 x 13.56MHz RFID Keyfob
R6.90  Inc VAT
Arcade Kit DIY Replacement Parts USB Encoder to PC Joystick and Buttons (Arcade kit)
Features :

Each encoder can support one joystick.
Use them to DIY your own Arcade game machine.
The Zero Delay USB Arcade Encoder is a fully compatible plug and play solution, simply plug in your joystick and buttons into the encoder, plug the USB cable into the Pi, map your buttons in RetroPi and away you go - it really is that easy! You can use multiple encoders at the same time, so they're great for multiplayer arcade machines!
 
Specifications :

Joystick Size: Approx. 95x60x100mm
Encoder Board Size: Approx. 85x35mm
USB Cable Length: Approx. 1.8m
Colour: Red

We have tested this unit on Raspberry Pi using Retropie and a Windows 7 PC using MAME.
 
Package includes :

1 x Encoder Board
1 x USB Cable
1 x 5 pin Cable for Joystick
1 x 5 Pin Joystick
8 x 30mm Push Buttons
2 x 24mm Push Buttons
13 x Cables for Buttons

Get Retropie on the Raspberry Pi
ModMyPi setup guide
R639.90  Inc VAT
GPIO Breadboard Breakout Kit (GPIO breakout kit)
We created this bundled breakout kit for easy connection from your Raspberry Pi GPIO to the breadboard.
The bundle is discounted to save you some hard earned cash rather than paying full price for loose components.

Package includes:

1 x BreadBoard 400 tie points
1 x 40-Pin Gray Ribbon Cable (29cm)
1 x GPIO T Board for easy breadboard connection
R99.90  Inc VAT
VGA 666 Adapter Board For Raspberry Pi 3 Model B 2B B+ A+ (vga board red soldered)
Description:

It is a neat and very useful solution for using a VGA display/monitor with your Raspberry Pi and is cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (using a parallel interface) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080p60 VGA video with no CPU load. It is also possible to drive this interface at the same time as the HDMI connection, so a dual screen set up is also possible.

This add-on board uses all but 6 of the GPIO pins so it may not be possible to use other add-on boards at the same time as the VGA adapter. You should disable all of the GPIO pin's function so that it can work properly.

We strongly recommend that you use 800x600 resolution. Higher resolution will slow down your Pi and use more RAM.

Features:

- Support for Raspberry Pi 3B / 2B / B+ / A+
- The VGA output supports resolution:from 640 x 480 up to 1920 x 1024 at 60fps.
- With 6 bits per channel you have a maximum of 262144 colours.
- No soldering required.
- Easy to setup.
- Easy to configure.
- Dimension: 64.00mm x 32.3mm
- Net weight: 16.5g

Note:

Raspberry Pi main board is not included.

More about this item: http://wiki.52pi.com/index.php/VGA666_Module_For_RPi_SKU:EP-0073

Package includes:

1 × VGA Adapter Board
R219.90  Inc VAT
Official Sanwa Arcade Button (Blue/Purple)) (Sanwa button blue)

If you're into arcade gaming, there's no doubt that you've heard of Sanwa. Used widely in top end arcade arcade machines and manufactured in Japan by Sanwa Denshi Co., Sanwa arcade products are up there at the top of quality chain in arcade gaming. You really can feel the difference in the quality and snappiness of the microswitches!

The Sanwa OBSF-30 range are 30mm "snap-in" style arcade buttons with built in microswitch and 2.8mm terminals. These buttons feature two plastic clips which are designed to lock into panels with a thickness of up to 4mm. They will also clamp perfectly well into greater thickness materials.

Features

  • Blue Colour
  • 30mm Diameter Arcade Button
  • Sanwa High-Quality Microswitch
  • Smooth Clicking Action
  • 2.8mm Terminal Contacts
  • Gold Plated Contacts
  • Official Sanwa Product
  • Manufacturer Part No. OBSF-30
R79.90  Inc VAT
Official Sanwa Arcade Button (Red) (Sanwa button red)

If you're into arcade gaming, there's no doubt that you've heard of Sanwa. Used widely in top end arcade arcade machines and manufactured in Japan by Sanwa Denshi Co., Sanwa arcade products are up there at the top of quality chain in arcade gaming. You really can feel the difference in the quality and snappiness of the microswitches!

The Sanwa OBSF-30 range are 30mm "snap-in" style arcade buttons with built in microswitch and 2.8mm terminals. These buttons feature two plastic clips which are designed to lock into panels with a thickness of up to 4mm. They will also clamp perfectly well into greater thickness materials.

Features

  • Red Colour
  • 30mm Diameter Arcade Button
  • Sanwa High-Quality Microswitch
  • Smooth Clicking Action
  • 2.8mm Terminal Contacts
  • Gold Plated Contacts
  • Official Sanwa Product
  • Manufacturer Part No. OBSF-30
R79.90  Inc VAT
Per Page      101 - 120 of 751