Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R179.90  Inc VAT
This robot chassis is designed to be used with our Explorer HAT, Explorer HAT Pro, or Explorer pHAT boards though it will work with other motor drivers!
R309.90  Inc VAT
R499.90
The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
R14.90  Inc VAT
This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable.
R64.90  Inc VAT
This panel mount HDMI (Male to Female) extension cable will allow you to extend an HDMI connection and secure it to an enclosure!
R99.90  Inc VAT
Panel Mount - USB A Male to USB A Female 50cm (panel mount USB AmAf)

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. It's short (50cm between connectors), so perfect for mounting your Raspberry Pi, Beagle Bone, Arduino etc. into a box!

The jack half has two mounting 'ears' with M3 screws installed, 8mm apart. The ears are flexible so the holes don't have to drilled very precisely.

Our Panel Mount USB Cable Features:

  • Specially Manufactured for ModMyPi for use with the Raspberry Pi & Other Microcontrollers 
  • Length between connectors: 50cm
  • Colour: Black
  • 28AWG
  • USB A Male to Panel Mount USB A Female
  • M3 Mounting Ears
R84.90  Inc VAT
830 Solderless Breadboard + Power Supply + Jumper Cable Kit (Powered Breadboard kit)
Quick video available on a similar MB-102 power supply at https://www.youtube.com/watch?v=ZpCep1jL-iA

Dimension: 16.7 x 5.7 x 1cm
Tie Points: 830 tie points (consists of: 630 tie-point terminal strips, 200 tie-point distribution strips)
Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Jumper size: Suitable for 20~29 AWG (0.3mm ~ 0.8mm) wires

MB-102 Power Supply Module:

Input voltage: 6.5V ~ 12 V DC / USB power supply
Output voltage: 3.3V / 5V select with jumpers
Maximum output current: <700mA
Fluctuation two road independent control, can switch over to 0V, 3.3V, 5V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use
Size: 5.3 x 3.2 x 2.5cm

Jumper Cables:

Breadboard jumper cable male to male
Typically used for electronics projects
Wires are flexible, durable, reusable, easy to trace
Easy to connect and disconnect

Kit includes:

1 x 830 tie point Solderless Breadboard
1 x MB-102 Breadboard Power Supply
65 x Breadboard Jumper Cables male to male
R142.90  Inc VAT
120Pcs 10cm Breadboard Jumper Cable Kit (3 jumper kit 10cm)
Description:

40pcs chromatic male to male color jumpers
40pcs chromatic color female to female jumpers
40pcs chromatic male to female color jumpers
Durable and reusable
Easy to use
A popular choice for constructing electronic projects
Use for electronic projects as including Raspberry Pi and Arduino projects

Specifications:

Length 
:10cm
Compatible with 2.54mm spacing pin headers and breadboards

 Kit includes:

1 x ribbon of 40pcs male to male jumpers
1 x ribbon of 40pcs female to female jumpers
1 x ribbon of 40pcs male to female jumpers
R69.90  Inc VAT
AData PT100 Black 10000mAH Powerbank (Adata Bank 10000 )
Features
• Portable Easy-Grip Design
A streamlined easy-grip design allows you to carry the AData PT100 easily while charging.
 
 


• Worry-Free,  Continuous Charging
No need to worry about running out of power when you're on the go! The AData PT100 comes with a whopping 10000mAh charge capacity – enough for up to 5 full charges for an iPhone 5, and 1.5 charges for an iPad Mini.
 

 
• Auto On-Off
Whenever you connect your device to the PT100, it automatically begins charging without needing to press a button. When charging finishes, the AData PT100 automatically shuts off.

• 4-Mode LED Lighting

ADATA's PT100 Power Bank also works as an LED flashlight with 4 lighting modes. Just press and hold a button for 2 seconds to turn on the built-in flashlight. Press the button quickly to switch between flashlight modes. Whenever you need to use your PT100, it remembers which mode you last used.
 

• LED Power Level Display
An LED power level indicator shows how much power remains in the PT100.
 
.
Specifications
• Capacity 10000mAh
• Colour-Black/Green
• Battery Li-ion (18650)
• Weight  285g / 10oz
• Input  DC 5V / 2A (Micro USB)
• DC 5V / 1A (Type-A USB)
• DC 5V / 2.1A (Type-A USB)
• Operating Temperature 0°C ~40°C
• Dimensions (L x W x H) 140 x 63 x 21.5mm
R329.90  Inc VAT
DC 9V 1A Battery Button Power Cable Tieline For Arduino (9VDC Batt arduino power clip)

Description:

This is a DC 9V Battery Button Power Cable Tieline For Arduino

Barrel adapter is negative on the outside

Package includes:

1 x DC 9V Battery Button Power Cable 
R9.90  Inc VAT
Compact Keyboard Wired USB (compact keyboard)

It's a compact wired USB keyboard at an excellent price! This one connects directly to the Raspberry Pi USB ports, and has been tested to make sure it's fully compatible!

We've chosen a high quality, low profile version which accentuates a soft touch and tactile feedback for comfortable typing.

ModMyPi's Compact Wired USB Keyboard Features:
 
  • Compact UK layout keyboard 
  • USB connection with 1.5 Metre cable
  • Tested for compatibility with the Raspberry Pi
  • Number Lock and Caps Lock Lock Indication Lights
  • Low Profile Tactile Keys for Typing Comfort
  • CE, FCC and RoHS Compliant
  • Comes Retail Packaged
  • Non-slip Rubber Feet Pre-Assembled
R179.90  Inc VAT
STS-Pi - Build a Roving Robot (STS Tri robot chassis)

This robot chassis is designed to be used with our Explorer HAT, Explorer HAT Pro, or Explorer pHAT boards though it will work with other motor drivers!

The kit is a great way to introduce yourself to robots and controlling motors with your Raspberry Pi. It even includes a camera mount so your little robot can take pictures while it's roaming around!

There is no soldering required and the whole kit can be put together with a small flat-head screwdriver.

Connor Plant has created a build video here: https://www.youtube.com/watch?v=jHn3ZiPG69w

Kit includes:

  • Laser cut chassis
  • Raspberry Pi camera mount
  • 2 x super-grippy moon-buggy wheels
  • 2 x push header motors (298:1 ratio)
  • 0.5" front castor wheel
  • Jumper leads
  • 2 x motor mounting brackets
  • 2 x battery clips (battery optional and not included)
  • Nuts, bolts, and other fixings

Build up your robot and program it in Python, Scratch, or whatever language you prefer! Add a USB battery pack (not included) and a WiFi dongle and you can make it roam free!

Does not include the Raspberry Pi, Raspberry Pi Camera, or Explorer HAT (Pro or pHAT).

This robot chassis is designed to be used with our Explorer HAT, Explorer HAT Pro, or Explorer pHAT boards though it will work with other motor drivers!
R309.90  Inc VAT
R499.90
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board (Adaf TB6612 stepper driver)

Fire four solenoids, spin two DC motors or step one bi-polar or uni-polar stepper with 1.2A per channel (3A peak) using the TB6612.

 We really like these dual H-bridges, so if you want to control motors without a shield or HAT these are easy to include on any solderless breadboard or perma-proto.

We solder on TB6612 onto a breakout board for you here, with a polarity protection FET on the motor voltage input and a pullup on the "standby" enable pin. Each breakout chip contains two full H-bridges (four half H-bridges). That means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for 1.2 Amp or less of current, since that's the limit of this chip. They do handle a peak of 3A but that's just for a short amount of time. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver!

There's two digital inputs per H-bridge (one for each half of the bridge) as well as a PWM input per driver so you can control motor speed. Runs at 2.7V-5V logic. The motor voltage is separate from the logic voltage. Good for motor voltages from 4.5V up to 13.5V! This wont work well for 3V motors.

Comes as one assembled and tested breakout plus a small strip of header. You'll need to do some light soldering to attach the header onto the breakout PCB. Arduino, motors, and power supply not included. Check out the handy tutorial on assembly and wiring!

R124.90  Inc VAT
L293D Dual H-Bridge IC - Solenoid, DC & Stepper Motor Driver (L293D IC H-bridge)
The L293DNE Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
 
Each chip contains two full H-bridges (four half H-bridges) which means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver
 
 
The L293D Dual H-Bridge IC - Stepper & DC Motor Driver Features:
  • Dual H-Bridges - run four solenoids, two DC motors, or one uni-polar or bi-polar stepper motor
  • Output Current: 600mA per channel (1.2A Max)
  • No of Channels: 4
  • Input: 5V Logic
  • Supply Voltage Range: 4.5V to 36V
  • No. of Pins: 16
  • Operating Temperature Range: 0°C to +70°C

Downloads

L293DNE Data Sheet

Tutorials

Controlling a Stepper Motor with the L293D

Raspberry Pi: Controlling a DC Motor

Arduino: Stepper Motors

Arduino: DC Motor Reversing

The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
R14.90  Inc VAT
WS HDMI 10.1" 1280x800 (IPS) (B) Touch Screen & Case (10.1 Capacitive(B)touch display stand)

New to ModMyPi, Wareshare's 10.1" 1280x800 IPS Touch Screen & Case! It's easy to set up, features a great resolution, comes complete with a black acrylic stand, and has touch by default!

Recent upgrades:
If you were used to seeing the Self Test at power on, this has now been removed. However if you remove the jumper located on the controller board you can re-enable this feature.

This device uses the Pi's HDMI output for display, and the Pi's USB port for touch control. Assembly of the Waveshare 10.1" screen is easy, just follow our simple guide here. Please Note. This device does require some simple set up. You will need a UK to EU power adapter.

The LCD Screen Features:

  • 10.1inch HDMI LCD (B)
  • 1280x800 Resolution
  • UK 5V 2A Power Supply Included
  • Capacitive touch control
  • Supports Raspberry Pi, Ubuntu, Windows 10 IoT driver free
  • Can also be used as a computer monitor, supports Windows 10/8.1/8/7/XP etc.
  • Supports BB Black, comes with Angstrom image
  • HDMI interface for displaying, USB interface for touch control
  • Input interfaces: HDMI
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • Firmware is upgradable to support more new features (continually updated)

The Case Features:

  • Material : High quality black and clear Acrylic
  • Comes with bottom holder, 45° tilt angle
  • Features mounting holes for Raspberry Pi 3B/2B/B+/A+/B, and BB Black


Troubleshooting:


For the Windows OS on PC, the resolution of the LCD is automatically identified. Hence, you do not need to make the relative settings. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work.


If the display in not working correctly or not displaying at all, you may need to edit setting in the config file.
    sudo nano /boot/config.txt

And add the following to the end of the file:
    max_usb_current=1
    hdmi_group=2
    hdmi_mode=87
    hdmi_cvt 1280 800 60 6 0 0 0
    hdmi_drive=1

If this does not ressolve the problem then use the following instead:
    max_usb_current=1
    hdmi_group=2
    hdmi_mode=27
    hdmi_drive=1



Downloads

User Manual
Quick Assembly Guide

Wiki


R1,999.90  Inc VAT
600 Pcs 15 Value Transistor TO-92 Assorted Box Kit (transistor box kit)
15 values
Quantity: 600pcs

Note: Because they are packed manually it is possible to have inconsistencies.
Thank you for your understanding






Resources:

Introduction to Transistors
Different Types of Transistors and Their Working
R169.90  Inc VAT
White Nylon Zip Cable Tie Label Strap Strip With Marking Tag 3X100mm(100 pack) (label cable ties 100)
Description:
Material:nylon
Color:white
Cable Size:100mm x 3mm(L*W)
Tag Size:20mm x 13mm(L*W)
Quantity:100pcs

Features:
Nylon cable tie label
Made from high quality nylon 66 material, UL recognized
Durable,acid-resistance, anti-rust,anti-aging,insulating
Unique marking tag design, enable you to mark the different cables when connected, easy to recognize.
Widely used in bundled cables for TV, computer, appliances, lighting, electrical, electronic toys and other products lines

Package includes:
100 x Nylon Zip Cable Tie Labels
R149.90  Inc VAT
USB To RS232 TTL PL2303HX Cable Adapter Module Converter (USB split to jumper Female)
USB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO board to your computer via the usb port.

Specification:

Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your projects
Black cable-----GND
Green cable----TXD
White cable----RXD
Red cable ---- VCC (5V)

Package includes:

1 x USB to RS232/TTL PL2303HX cable adapter module
R69.90  Inc VAT
WS Raspberry Pi Night Vision Camera (IR-CUT) (Night Vision IR-CUT)

Features

  • Raspberry Pi Camera, supports all revisions of the Pi
  • Embedded removable IR-CUT filter, eliminating color distortion in the daylight
  • Comes with infrared LED, supports night vision
  • 5 megapixel OV5647 sensor
  • Adjustable focus distance
  • Camera specifications
    • CCD size : 1/4inch
    • Aperture (F) : 1.8
    • Focal Length : 3.6mm
    • Angle of View (diagonal) : 75.7 degree
    • Sensor best resolution : 1080p
  • 4 screw holes
    • Used for attachment
    • Provides 3.3V power output
    • Supports connecting infrared LED and/or fill flash LED
  • Dimension: 31mm × 32mm

Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable


Development Resources

Getting started with PiCamera
Wiki :
www.waveshare.com/wiki/RPi_IR-CUT_Camera

R359.90  Inc VAT
One digit Red 7 Segment 0.56 Inch 1 Bit Common Anode LED Digital Tube (7 segment single digit)
Features:

Model: 5611BH  Common Anode 
Size: 0.56 inch
Color: red

Package includes:

1 x Red 7 Segment 0.56 Inch 1 Bit Common Anode LED Digital Tube

Some code examples
https://circuitdigest.com/microcontroller-projects/raspberry-pi-7-segment-display-tutorial
https://raspi.tv/2015/how-to-drive-a-7-segment-display-directly-on-raspberry-pi-in-python
R12.90  Inc VAT
5M GT2 Timing Belt With 16T GT2 Timing Pulleys (5m belt 5 pulleys)
GT2 Pulley:

Teeth: 16
Groove width: 7mm
Total width: 15mm
Bore: 5mm
Flange: Dual
Material: Aluminium

GT2 Belt:

Pitch: GT2
Width: 6mm
Length: 5m

Features:

Durable and practical
Designed specifically for linear motion
GT2 Pulley and GT2 Belt are used together.
Round tooth profile guarantees that the belt tooth fits smoothly
16 Teeth contact with the belt, that minimizes the chance of the belt slipping

Package includes:

1 x GT2 Belt  
5 x GT2 Pulleys
1 x allen key
R339.90  Inc VAT
2M GT2 20 Teeth Belt with Aluminium Timing Pulleys (2m belt 4 pulleys,tensioners)
GT2 Pulley:

Teeth: 20
Groove width: 5mm
Total width: 15mm
Diameter of bore: 5mm
Flange: Dual
Material: Aluminium

GT2 Belt:

Pitch: GT2
Width: 6mm
Length: 2m

Idler:

Teeth: 20
Diameter of bore: 5mm
Total width: 8mm
Material: Aluminium

Features:

Durable and practical
Designed specifically for linear motion
GT2 Pulley and GT2 Belt are used together
Round tooth profile guarantees that the belt tooth fits smoothly
20 Teeth contact with the belt minimizes the chance of the belt slipping

Package includes:

1 x GT2 Belt  
2 x GT2 Pulley
2 x Idler
4 x Tensioner
1 x Allen key
R149.90  Inc VAT
RJ45 Network Cable Lead Connector Boot for Cat 5 5e 6 (10 pack) (RJ45 boots grey(10))
Features:
1.Make Your Own Ethernet Cables
2 Protect your cable ends with these snag free boots for RJ-45
3.Helps to Keep Cables from Snags and Rips
4.Extend the Life of your Cable

Specifications:
1. Material: Rubber
2. Dimensions: 27.5×15×15mm (L × W × H)
3. Color: Gray

Package Included:
10 x RJ45 Cat 5e 6 Connector Boots
R15.13  Inc VAT
Raspberry PI Camera Cable Joiner/Extender (Cam cable joiner/extender)

PLEASE NOTE: Pic is for demonstration purposes only
Ribbon Cables are NOT included, this is the adaptor board only!


This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable on Raspberry Pi B/B+/2/3 and Pi Zero using multiple cables!

The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that's simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as you'll need!

Features:

  • 1mm Pitch
  • 15 Way Flat Cable Connector Female to Female
  • Designed for Raspberry Pi Camera Cables

Raspberry Pi B/B+/2/3 - You will need 2 standard Raspberry Pi Camera Cables + One Extender Board.

Raspberry Pi Zero -You will need one Pi Zero Camera Cable + Standard Raspberry Pi Camera Cable + One Extender Board.

This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable.
R64.90  Inc VAT
Panel Mount HDMI Cable 0.4m (panel mount hdmi)

This panel mount HDMI (Male to Female) extension cable will allow you to extend an HDMI connection and secure it to an enclosure!

Perfect for placing your Raspberry Pi in a secure box, the panel mount uses two #4-40 (M3) screws to attach the female socket end! The panel mount screw holes are 26.9mm apart.

This cable is 0.4m long (about 16 inches), and is a V1.4 CEC enabled cable.

This panel mount HDMI (Male to Female) extension cable will allow you to extend an HDMI connection and secure it to an enclosure!
R99.90  Inc VAT
Per Page      121 - 140 of 751