Search

•     RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
•     Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
•     264KB of SRAM, and 2MB of on-board Flash memory
•     USB-C connector, keeps it up to date, easier to use
•     Castellated module allows soldering direct to carrier boards
•     USB 1.1 with device and host support
•     Low-power sleep and dormant modes
•     Drag-and-drop programming using mass storage over USB
•     29 × multi-function GPIO pins (20× via edge pinout, others via solder points)
•     2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
•     Accurate clock and timer on-chip
•     Temperature sensor
•     Accelerated floating-point libraries on-chip
•     8 × Programmable I/O (PIO) state machines for custom peripheral support

1. USB Type-C connector
2. W25Q16JVUXIQ 2MB NOR-Flash
3. BOOT button press it when resetting to enter download mode
4. RESET button
5. WS2812 cool RGB LED

6. ME621 low dropout LDO, max current 800MA
7. RP2040 dual-core processor, up to 133MHz operating frequency
8. RP2040 pins 10x solder points, 9 of which are for GPIO

outline dimensions

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0 processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• USB-C connector, keeps it up to date, easier to use
• 0.96inch 160×80 pixels 65K colorful IPS LCD display
• Lithium battery recharge/discharge header, suitable for mobile devices
• Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
• Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components)
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support

7. ETA6096 high efficiency Lithium battery recharge manager
8. RP2040 dual-core processor, up to 133MHz operating frequency
9. W25Q16JVUXIQ 2MB NOR-Flash
10. DEBUG points
11. Pinout

outline dimensions

Wiki: RP2040-LCD-0.96

What's in the box?

1 x RP2040-LCD with pre-soldered headers

•     RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
•     Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
•     264KB of SRAM, and 4MB of on-board Flash memory
•     USB-C connector, keeps it up to date, easier to use
•     Lithium battery recharge/discharge header, suitable for mobile devices
•     Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
•     Castellated module allows soldering direct to carrier boards
•     USB 1.1 with device and host support
•     Low-power sleep and dormant modes
•     Drag-and-drop programming using mass storage over USB
•     26 × multi-function GPIO pins
•     2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
•     Accurate clock and timer on-chip
•     Temperature sensor
•     Accelerated floating-point libraries on-chip
•     8 × Programmable I/O (PIO) state machines for custom peripheral support

A much needed accessory for the entire range of Magnum Soldering Irons and Soldering Stations.

This Magnum cast iron soldering spring stand allows for a clean, safe and organised work surface. Included with a cellulose sponge.

What's in the box?

1 x Soldering iron stand
1 x Soldering Sponge

Resources:

Introduction to soldering
Video: How to solder properly
The secrets to good soldering

• Work out-of-the-box. No soldering!
• Access to all Raspberry Pi Pico's pins on two 20 ways pin headers
• LED indicators on all GPIO pins
• 3x programmable push button (GP20-22)
• 1x RGB LED - NeoPixel  (GP28)
• 1x Piezo buzzer (GP18)
• 1x 3.5mm stereo audio jack (GP18-19)
• 1x Micro SD card slot (GP10-15)
• 1x ESP-01 socket (GP16-17)
• 6x Grove port

Dimensions:

• 1 x Maker Pi Pico
   Note  Raspberry Pi Pico NOT included. Please purchase separately here.

• Maker Pi Pico Datasheet
• Maker Pi Pico Rev1.2.0 Schematic
• Maker Pi Pico Demo & Example Code
• Official Raspberry Pi Pico Page
• Getting started with Raspberry Pi Pico
• Raspberry Pi Pico Datasheet
• RP2040 Datasheet
• Raspberry Pi Pico Python SDK
• Raspberry Pi Pico C/C SDK

Connect a glorious, squishy, 4x4 rainbow-illuminated keypad to your Raspberry Pi Pico - perfect for making a custom USB input device!

Scoring very highly in the Pimoroni "things on our desk that make people say ooo" rankings, RGB Keypad Base equips a Pico with an eye-catching 4x4 silicone keypad, fully loaded with addressable APA102 LEDs so that each key can be illuminated in any colour that your little unicorn heart desires. It's all mounted on a sturdy base with rubber feet to keep it nice and level, with a handily labelled landing area for your Pico. We've broken out the full set of Pico pins to make it easy to connect up other hardware as well.

Connect your Pico project to another computer via USB for a beautiful macro keypad or a tidy midi controller. RGB Keypad Base would also work well in any project that would benefit from having fancy light up buttons as inputs - a code protected door lock perhaps, a disco dance floor for your fingers or a Simon Says style game with which to taunt your friends.

A Raspberry Pi Pico is not included - click here if you'd like to buy one!

Your Pico will need to have male headers soldered to it (with the pins pointing downwards) to attach to our add-on boards.

Features

• 4x4 silicone keypad with conductive buttons
• 16 x APA102 addressable RGB LEDs (datasheet)
• Keypad buttons are connected via a TCA9555 IO expander (I2C address: 0x20).
• Labelled landing area with female headers for attaching your Pico, with broken out pins.
• Compatible with Raspberry Pi Pico.
• Some assembly required!
• No soldering required (as long as your Pico has header pins attached).
• Dimensions: approx 60mm x 101mm x 16mm (L x W x H, assembled)
• C/C and MicroPython libraries

Includes

• 1x Pico RGB Keypad Base
• 1x (reversible) square retainer plate
• 1x silicone keypad
• M2 8mm bolts and nuts
• 4x rubber feet

Getting started

Turn the larger board over, and attach the little rubber feet to the paw print spaces on the bottom.

Flip it over again, and pop the silicone keypad over the buttons so the tabs fit into the holes. You can then slot the retainer plate over the top of the keys, matching up the key markings with those on the base board. You can install the retainer plate either way up, depending on whether you prefer it patterned or plain!

Poke the M2 bolts through the holes in the mounting plate (from the top) and screw on the nuts to keep all the layers sandwiched together. The bolts only need to be tightened up enough to keep the layers in place - if you find that the keys are hard to push or that the silicone layer is bulging out of the sides you might want to slacken them off a bit.

The labels on the base will show you which way round to attach your Pico - just match up the USB port to the markings on the board.

The easiest way to get started is by downloading and copying our custom MicroPython uf2 to your Pico, it includes all the libraries you'll need to use our add-ons. Click here for our beginner friendly tutorial!

You can find C examples here and MicroPython examples here.

Pinout

Built especially to showcase the low cost, feature-rich RP2040 chip on the Raspberry Pi Pico, this board has VGA output, an SD card slot, digital I2S audio output, and more!

Based on the reference design by Raspberry Pi, our Pimoroni Pico VGA Demo Base is a great way to start experimenting with Raspberry Pi Pico/RP2040. It's the perfect way to demo of some of the fun things you can achieve with the RP2040 microcontroller such as generating a solid VGA output without taxing the CPU at all!

• Amaze your friends by showing them you still own a D-sub cable!
• Bask in the glory of 15-bit analog video!
• Get teary eyed over the warm, authentic, RC filtered PWM audio!

This board will run the various video example programs that Raspberry Pi have put together to demonstrate features of the RP2040.

Please note that VGA Demo Base only currently works with the C/C Pico SDK!

A Raspberry Pi Pico is not included - click here if you'd like to buy one!

Your Pico will need to have male headers soldered to it (with the pins pointing downwards) to attach to our add-on boards.

Features

• 15-pin VGA (D-sub) connector
• PCM5100A DAC for line out audio over I2S (datasheet)
• PWM audio output
• SD card slot
• Reset button
• Female headers to install your Raspberry Pi Pico
• Three user-controllable switches
• Rubber feet
• Compatible with Raspberry Pi Pico
• No soldering required (as long as your Pico has header pins attached)
• Programmable with C/C

Getting started

The pin-out of our board is the same as Raspberry Pi's reference board, you can find it in chapter 3 of Hardware Design with RP2040 along with more general info about the VGA reference board.

To run the audio and video examples in Raspberry Pi's experimental repos, first make sure you have up to date versions of pico-extras and pico-playground. When building the examples, you will need to specify the board configuration so that the examples use the correct pins. You can do this by creating a new build directory and then specifying the board definition when using cmake:

cmake -D"PICO_BOARD=vgaboard" ..

There's more details on about how to build applications with custom board configurations in Appendix D / page 267 of the C/C SDK documentation.

Pinout

Description:

Give your Raspberry Pi Pico project the capacity to chat with 2.4GHz Wi-Fi networks plus a handy microSD card slot!

Pico Wireless Pack attaches to the back of your Pico and uses an ESP32 chip to let your Pico connect to 2.4GHz wireless networks and transfer data. There's a microSD card slot for if you want to store lots of data locally as well as a RGB LED (for status updates) and a button (useful for things like enabling/disabling Wi-Fi).

Great for quickly adapting an existing Pico project to have wireless functionality, Pico Wireless Pack would come in handy for sending sensor data into home automation systems or dashboards, for hosting a web page from a matchbox or for letting your Pico interact with online APIs.

Raspberry Pi Pico not included - click here if you'd like to buy one.

Features

• ESP32-WROOM-32E module for wireless connectivity (connected via SPI) (datasheet)
• 1 x tactile button
• RGB LED
• Micro-SD card slot*
• Pre-soldered female headers for attaching your Raspberry Pi Pico
• Fully assembled
• No soldering required (as long as your Pico has header pins attached).
• Compatible with Raspberry Pi Pico.
• Dimensions: approx 53mm x 25mm x 11mm (L x W x H, including headers and components)
• C and MicroPython libraries

Getting started

We've added C /MicroPython support for Wireless Pack to our Pico libraries and our custom MicroPython uf2 comes with wireless drivers for the ESP32 baked in. You can find C examples here and MicroPython examples here - there's a Cheerlights example that shows you how to make requests from an API, and one that sets your Pico up as a tiny HTTP server, accessible through your browser.

Alternatively, you can use Pico Wireless Pack with CircuitPython and Adafruit's easy to use ESP32SPI and Adafruit_CircuitPython_SD libraries. You'll need to alter their examples to use the correct pins:

spi = busio.SPI(board.GP18, board.GP19, board.GP16)

esp32_cs = DigitalInOut(board.GP7)
esp32_ready = DigitalInOut(board.GP10)
esp32_reset = DigitalInOut(board.GP11)


SD_CS = board.GP22

Pinout

Notes

• * Please note that SD card support in the C SDK is still quite experimental - if you're planning on doing things with data you might have an easier time of it if you use CircuitPython!
• The cuttable traces on the back let you disconnect functions that you're not using, freeing up the pins and making it easier to use Wireless Pack with other add-ons.

Smart robot is always the favorite project of electronic enthusiasts, and there've been several robots based on Raspberry Pi. Now, here comes the Pico version: PicoGo!

The PicoGo is a smart mobile robot based on Raspberry Pi Pico, it includes ultrasonic module, LCD module, Bluetooth module, line following module, and obstacle avoidance module, all these functions are highly integrated for easily achieving IR obstacle avoidance, auto line following, Bluetooth/IR remote control, and more. With various advanced features, it will help you fast get started with smart robot design and development.

PicoGo smart mobile robot features:

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
• Battery protection circuit: over charge/discharge protection, over current protection, short circuit protection, reverse proof, more stable and safe operating
• Recharge/Discharge circuit, allows programming/debugging concurrently while recharging
• 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking
• Onboard multiple smart robot sensors like line tracking, obstacle avoidance, no more messy wiring
• 1.14inch IPS colorful LCD display, 240 x135 pixels, 65K colors
• Integrates Bluetooth module, allows teleoperations like robot movement, RGB LED display color, buzzer, etc. by using mobile phone APP
• N20 micro gearmotors, with metal gears, low noise, high accuracy
• Colorful RGB LED, pretty cool!

1. PicoGo base board x1
2. PicoGo acrylic panel x1
3. 1.14inch LCD Module x1
4. Ultrasonic sensor x1
5. IR remote controller x1
6. USB-A to micro-B cable 1.2m x1
7. PH2.0 8Pin cable 5cm opposite side headers x1
8. Mini cross wrench sleeve x1
9. Screwdriver x1
10. Screws and standoffs pack x1

https://www.waveshare.com/wiki/PicoGo


*Pico & 14500 Batteries not included*

It's time to add a little accessory to your everyday outfit! Fabric unisex baseball cap from Cytron for every maker that loves making stuff. Simple and fashionable!

Comes in black colour with the slogan of TRUST ME I'M A MAKER, embroidered at the front of the cap.


Specifications:

• Coming from makers to makers :)
• Unisex, suitable for both male and female maker :)
• 100% fabric, super comfortable
• Black color fabric with TRUST ME I'M A MAKER slogan
• With adjustable silver metal belt buckle strap, adjustable size

What's in the box ?

1 x Maker Baseball Cap

Onboard multiple connectors including:
CSI/DSI/RTC/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot




What's On Board?

1. CM4 socket
   suitable for all variants of Compute Module 4
2. Power input/Programming
   5V/2.5A power supply, or used for eMMC burning
3. DISP
   MIPI DSI display port
4. FAN
   for connecting cooling fan, allows speed adjustment and measurement
5. CAM
   2x MIPI CSI camera ports
6. HDMI0 connector
   HDMI0 port, supports 4K 30fps output
7. USB 2.0 ports
   2x USB 2.0 ports, for connecting sorts of USB devices
8. Gigabit Ethernet connector
   Gigabit Ethernet RJ45 connector, with 10 / 100 / 1000M network support
9. M.2 indicator
   indicating the operating status of M.2 interface
10. ACT indicator
    indicating the operating status of Raspberry Pi
11. PWR indicator
    indicating the status of Raspberry Pi power supply
12. BOOT selection
    ON: CM4 would be booted from USB-C interface
    OFF: CM4 would be booted from eMMC or Micro SD card

13. 40PIN GPIO header
14. Micro SD card slot
    for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
15. HDMI1 FFC connector
    HDMI1 port, supports 4K 30fps output
16. USB 2.0 FFC connector
    can be connected through an adapter
17. FE1.1S
    USB HUB chip, expanding one USB port to 4x ports
18. M.2 slot
    supports sorts of NVME SSD, or communication modules with PCIE M.2 KEY-M interface
19. RTC chip
    allows RTC-related functions like wakeup, shutdown, reboot, and more
20. RTC interrupt selection
    PI-RUN: CM4 reboot on RTC interruption
    GN-EN: CM4 shutdown on RTC interruption
    D4: D4 pin is triggered on RTC interruption
21. EMC2301
    fan controller, for speed adjustment / measurement
22. RTC battery holder
    supports CR1220 button cell

Outline dimensions



Working with an additional SSD

WIKI: CM4-IO-BASE-B

Features:

• Specially designed for Raspberry Pi 400.
• Compatible with Raspberry Pi 3 & 4.
• Extension pins for HAT.
• Clearly labelled GPIOs breakout for jumper wires.
• Status LEDs for each GPIOs.
• 1 x programmable buzzer.
• 4 x programmable push buttons.
• 3 x Grove ports (GPIO, UART & I2C) for external modules.
• Onboard 3.3V regulator provides extra current up to 800mA.

• 1 x Maker Hat Base
• 1 x Mini Breadboard (Random Color)
• 1 x 40 Ways Female to Female IDE cable (10cm)
• 1 x Flat Cable Clamper with Adhesive (60mm)
• 4 x Silicone Bumper

Resources:

• Datasheet
• CAD File

• ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)
• OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)

1 x 2*20PIN color-coded straight pin header

The Grove Base Hat for Raspberry Pi provides a Digital/Analog/I2C/PWM/UART port to meet all your needs. With the help of the build-in MCU, a 12-bit  8 channel ADC is also available for Raspberry Pi. Currently, more than 60 groves have supported the Grove Base Hat for Raspberry Pi.

Compared with Grove Pi , the Grove Base Hat for Raspberry Pi does not use the ATMEGA chip for data conversion, so it runs faster. We provide the Raspberry Pi driver for Grove Base Hat for Raspberry Pi. What's more, Grove Base Hat for Raspberry Pi is much more cost-effective. In other words, we lowered the threshold for using the grove series on the Raspberry Pi. We hope you like it, enjoy :D

• GPIO:
  The same pinout as the raspberry pi.
   
• PWM(pulse-width modulation):
  The Grove PWM Port connects to GPIO/BCM pin12(PWM0) and GPIO/BCM pin13(PWM1), which is the hardware PWM pin of Raspberry Pi, in addition, you can use all the GPIO pins as the soft PWM pin.
   
• UART: 
  The Grove UART port connects to the GPIO14(UART0 TX) and GPIO15(UART0 RX). UART is commonly used on the Pi as a convenient way to control it over the GPIO or access the kernel boot messages from the serial console (enabled by default).It can also be used as a way to interface an Arduino, bootload ATmega, ESP8266, etc with your Pi.
   
• Digital: 
  There are 6 digital Grove sockets in this board, normally the yellow wire(which connect to the top pin of the 4 pins Grove socket as) of Grove cable is the signal wire, so we name the digital Grove port D5/D16/D18/D22/D24/D26.
   
• Analog: 
  As we know, there is no ADC in the Raspberry Pi, so it can not work with analog sensors directly. Now with the help of the build-in MCU STM32, the Grove base HAT can work as an external 12-bit ADC, which means you can use the analog sensor with your Raspberry Pi. Even more pleasing is that not one but four analog Grove sockets are available.
  The analog sensor inputs the analog voltage into the 12-bit ADC. After the ADC converts the analog data to digital data, it input the digital data to the Raspberry Pi through the I2C interface.
   
• I2C: 
  There are three I2C ports available in this board, they all connect to the I2C pin of the raspberry directly. You can consider this part as an I2C hub. Most of Seeed's new grove modules have an I2C interface, you may find those I2C three ports are extremely useful.
   
• SWD: We use the SWD port to burn the firmware to this hat. In addition, you can see 3 GPIO pins in this section, i.e., pin 9/pin 10/pin 11. Those three pins do not use by any Grove port, you are free to use them without worrying about pin conflicts.

Note:

1. All the silkscreen layer pin number beside the Grove port is the BCM pin number. The difference between BCM pins and the physical pins please refer to here.
2. Compared with hardware PWM, the software PWM isn't so accurate and will have trouble at high frequencies.
3. The GPIO/BCM pin18 is also marked as PWM0. The GPIO/BCM 12 and the GPIO/BCM 18 share the same PWM channel, so they can't be set to different rates.
4. The audio jack output also uses PWM 0 and PWM 1, so you can't have an audio output on that socket and use the PWMs at the same time.

• Support Raspberry Pi 2B, 3B, 3B and 4
• build-in MCU
• 12-bit ADC
• Multi-type Grove port
• Operating Voltage: 3.3V
• MCU: STM32/MM32
• ADC: 12-bit 8 channel
• Grove Ports:
  • 6 x Digital
  • 4 x Analog
  • 3 x I2C
  • 1 x PWM
  • 1x UART
• Raspberry pi communication bus: I2C
• I2C Address: 0x04/0x08

• 1 x HAT - Grove Base for Raspberry Pi

• Getting started with HAT-Grove Base for Raspberry Pi, Seeed's wiki page
• Grove Base Hat for Raspberry Pi Eagle Files, zipped file
• Seeed Grove.py Library, zipped file
• STM32F030F4P6TR-Firmware, zipped file
• MM32F031F6P6-Firmware, zipped file
• STM32 Datasheet, pdf file
• MM32F031F6P6_Datasheet.pdf, pdf file
• SCH & PCB drawing, zipped file
• Project example Windows 10 IoT Core Proximity Triggered Camera Applications

On top of that, we have provided you with detailed instructions on the use of Raspberry Pi and the use of each module, which including 8 lessons for the module. Just click the wiki to view the user manual. Also, you can check the video guide here, which will tell you how to use this kit step by step.

All in all, whether you are a student, teacher, artist, hardware enthusiast, and so on, with the help of the Grove Base Kit for Raspberry Pi,  you will get to know Raspberry Pi quickly and comprehensively.

For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your use of the product.

Features:

• A great kit for Raspberry Pi beginner to get started
• With Grove modules, no wiring is necessary
• Plug and Use module
• Include 10 Grove modules and a Grove base for Raspberry Pi

Now the kit comes with the Grove Base Hat for Raspberry Pi, making Raspberry Pi compatible with the Grove System.

The Grove Base Hat for Raspberry Pi provides Digital/Analog/I2C/PWM/UART port to meet all your needs. With the help of build-in MCU, a 12-bit 8 channel ADC is also available for Raspberry Pi.

Grove Base HAT Features:

• Compatible with all 40 GPIO pin Raspberry Pis:
  • Raspberry Pi 4 Model B 8GB
  • Raspberry Pi 4 Model B 4GB
  • Raspberry Pi 4 Model B 2GB
  • Raspberry Pi 4 Model B 1GB 
  • Raspberry Pi 3 Model B
  • Raspberry Pi 3 Model B
  • Raspberry Pi 3 Model A
  • Raspberry Pi Zero WH
  • Raspberry Pi Zero 2 W
• build-in MCU
• 12-bit ADC
• Multi-type Grove port

Packing List:

• 1 x Grove Base Hat for Raspberry Pi
• 1 x Grove - Red LED Button
• 1 x Grove - Buzzer
• 1 x Grove - Moisture Sensor
• 1 x Grove - Temperature & Humidity Sensor (DHT11)
• 1 x Grove - Light Sensor
• 1 x Grove - mini PIR motion sensor
• 1 x Grove - Ultrasonic Ranger
• 1 x Grove - Relay
• 1 x Grove - Servo
• 1 x Grove - 16 x 2 LCD (White on Blue)

Resources:

• Grove - Introduction to Grove
• Grove - WiKi page for projects