Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
NodeMCU-32S ESP32 WiFi+Bluetooth Development Board (ESP32)

Overview

This is the NodeMCU development board based on ESP32, features WiFi+Bluetooth connectivity, onboard CP2102 and keys. What's more, all the I/O pins of ESP-WROOM-32 module are accessible via the extension headers.

Thanks to the rich open-source resources, it supports development in various ways such as Lua/AT commands/MicroPython/Arduino/IOT source code, etc. helps you to fast prototype IoT applications.

Features

  • Onboard ESP-WROOM-32 module
  • Onboard CP2102, USB to UART converter
  • USB port for power input, firmware programming, or UART debugging
  • 2x19pin extension headers, breakout all the I/O pins of the module
  • 2x keys, used as reset or user-defined

Specifications

  • WIFI module: ESP-WROOM-32
    • Processor: ESP32-D0WDQ6
  • Built-in Flash: 32Mbit
  • Antenna: Onboard PCB antenna
  • Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
  • WiFi protocol: IEEE 802.11 b/g/n
  • Bluetooth: Bluetooth 4.2
  • Frequency range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
  • WIFI mode: Station / SoftAP / SoftAP+Station
  • Power supply: 5V
  • Logic level: 3.3V
  • Dimensions: 48.26mm x 25.4mm

Applications

The NodeMCU-32S suit for IOT applications such as:

  • Smart home
  • Intelligent building
  • Industrial automation
  • Wearable devices
  • IP camera
  • Intelligent agriculture

Pinouts

R209.90  Inc VAT
Wemos® Lolin ESP32 + WiFi + Bluetooth Dual ESP-32 ESP-32S ESP8266 OLED Module (ESP32 with OLED display)
Description:
 
ESP32 is already integrated with antenna and RF, power amplifier, low noise amplifiers, filters and the power management module.
An entire solution on the least amount of PCB area. This board is a 2.4 GHz dual mode WiFi and bluetooth chip by tsmc 40nm low power technology, power and optimized RF characteristics for a wide range of applications.
 
Features:
 
High performance
Small volume, easily embeded to other products
Strong function, with the support of lwIP protocol, freertos
Support three modes: AP, STA and AP+STA
Support for lua program, easy to develop

Package includes:

1 x Wemos® Lolin ESP32 OLED Module

R189.90  Inc VAT
WS GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi (WS GSM/GPRS/GNSS/Bluetooth)

Please note: Raspberry Pi and micro SD in pic not included

Overview

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.

It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.

Features

General

  • Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/4B/Zero/Zero W
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • Bluetooth 3.0, supports data transferring through Bluetooth
  • Onboard USB TO UART converter CP2102 for UART debugging
  • 6x LEDs for indicating the module working status
  • SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder
  • Baudrate auto detection (1200bps ~115200bps)
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

GSM/GPRS

  • Band
    • GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
    • Quad-band auto search
    • Compliant to GSM phase 2/2
  • Emitting power
    • Class 4 (2W @ GSM 850/EGSM 900 MHz)
    • Class 1 (1W @ DCS 1800/PCS 1900 MHz)
  • GPRS connectivity
    • GPRS multi-slot class 12 (default)
    • GPRS multi-slot class 1~12 (configurable)
  • GPRS data feature
    • Downlink speed: max 85.6kbps
    • Uplink speed: max 85.6kbps
    • Coding schemes: CS-1\CS-2\CS-3\CS-4
    • Supports PAP (Password Authentication Protocol) for PPP connection
    • Supports PBCCH
    • Supports USSD
  • SMS
    • Supports: MT/MO/CB/Text/PDU mode
    • SMS storage: SIM card
  • Audio
    • Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate
    • Supports echo cancellation
    • Supports noise reduction

GNSS

  • Receiver type
    • 33 tracking channels
    • 99 acquisition channels
    • GPS L1 C/A code
  • Sensitivity
    • Tracking: -165 dBm
    • Cold starts : -148 dBm
  • Time-To-First-Fix
    • Cold starts : 28s (typ.)
    • Hot starts : < 1s
    • Warm starts: 26s
  • Accuracy
    • Horizontal position : <2.5m CEP

Bluetooth

  • Integrates AT commands
  • Compliant to Bluetooth specification3.0 EDR
  • Supports SPP, OPP, HFP/HSP, etc.

Misc

  • Operating voltage: 5V
  • Operating temperature: -40°C ~ 85°C
  • Storage temperature: -45°C ~ 90°C
  • Dimensions: 30.2mm x 65mm

What's on Board

  1. SIM868 module
  2. ZMM5V1: regulator diode
  3. SMF05C: TVS diode
  4. CP2102: USB TO UART converter
  5. MP1482: power chip
  6. NDC7002N: voltage level translator
  7. GPS status indicator
  8. NET indicator:
    • flashes fast when the module starts up
    • flashes slowly after GSM register succeed
  9. STA module working status indicator
  10. SIM868 UART Tx/Rx indicator
  11. Power indicator
  12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
  13. Raspberry Pi GPIO connector
  14. SIM card slot
  15. USB TO UART interface
  16. 3.5mm earphone/mic jack
  17. GNSS antenna connector
  18. Bluetooth antenna connector
  19. GSM antenna connector
  20. CR1220 battery holder: for RTC backup battery
  21. UART selection switch
    • A: control the SIM868 through USB TO UART
    • B: control the SIM868 through Raspberry Pi
    • C: access Raspberry Pi through USB TO UART

Development Resources

Wiki : www.waveshare.com/wiki/GSM/GPRS/GNSS_HAT

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.
R599.90  Inc VAT
At-09 4.0 Bluetooth Module For Ble With Backplane Serial Cc2540 Cc2541 Wireless Hm-11 (bluetooth board)
This small size Bluetooth 4.0 TTL transceiver module allows your target device to communicate with your iPhone/iPAD, IOS 6 or Android 4.3 devices. 
It's easy to use and completely encapsulated. 
You can set it as slave or master. 
You can use AT command to set the baudrate.


Specifications:

Ultra-low standby power consumption 90uA~400uA 
Coverage up to 60 meters 
Built in PCB antenna 
Power input: 3.6V-6V DC(Can not higher than 6V) 
Size: 43mm x 15mm 
Color: Blue 
Net Weight: 4g
 

Package Includes:

1 x  IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module

Setup

R79.90  Inc VAT
Wemos® Higrow ESP32 WiFi + bluetooth Battery + DHT11 Soil Temperature And Humidity Sensor Module (Wemos Higrow)
Description:
 
More details available at:https://github.com/LilyGO/higrowopen


A LG 3000mAH 18650 battery could make ESP32 run 17 hours or more.
This capacitive soil moisture sensor differs from most of the resistive sensors on the market, using capacitive sensing principle to detect soil moisture. It avoids the problem that the resistance sensor is easy to corrode and greatly prolongs its working life.
Size: 193.5mm x 29.4mm
 
Package includes:
 
1 x Wemos® Higrow ESP32 WiFi + bluetooth Battery + DHT11 Soil Temperature And Humidity Sensor Module
R389.90  Inc VAT
ESP32-WROVER 4MB Module with Bluetooth and WiFi (ESP32-WROVER)
 Description:

ESP32-WROVER is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. At the core of this module is the ESP32-D0WDQ6 chip*, same as ESP-WROOM-32 module. Compared to ESPWROOM-32, ESP32-WROVER has an additional SPI Pseudo static RAM (PSRAM) of 32 Mbits. As such, ESP32- WROVER features both 4 MB external SPI flash and 4 MB external PSRAM. The ESP32-WROVER module has a PCB antenna, while the ESP32-WROVER-I uses an IPEX antenna. The information in this datasheet is applicable to both of the two modules. The chip embedded is designed to be scalable and adaptive. There are two CPU cores that can be individually controlled, and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C.

The integration of Bluetooth, Bluetooth LE and Wi-Fi ensures that a wide range of applications can be targeted, and that the module is future proof: using Wi-Fi allows a large physical range and direct connection to the internet through a Wi-Fi router, while using Bluetooth allows the user to conveniently connect to the phone or broadcast low energy beacons for its detection. The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications. ESP32 supports a data rate of up to 150 Mbps, and 22 dBm output power at the antenna to ensure the widest physical range. As such the chip does offer industry-leading specifications and the best performance for electronic integration, range, power consumption, and connectivity. The operating system chosen for ESP32 is freeRTOS with LwIP; TLS 1.2 with hardware acceleration is built in as well. Secure (encrypted) over the air (OTA) upgrade is also supported, so that developers can continually upgrade their products even after their release.

Package includes:

1 x ESP32-WROVER 4MB Module









R89.90  Inc VAT
ESP32-CAM WiFi Module ESP32 serial Development Board 5V Bluetooth with OV2640 Camera Module (ESP32 CAM)
Product Features

Low-power dual-core 32-bit CPU for application processors
Main frequency up to 240MHz, computing power up to 600 DMIPS
Built-in 520 KB SRAM, external 4M PSRAM
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras, built-in flash
Support image WiFi upload
Support TF card
Support multiple sleep modes
Embedded Lwip and FreeRTOS
Support STA/AP/STA+AP working mode
Support Smart Config/AirKiss one-click distribution network
Support secondary development
R159.90  Inc VAT
AC8265 Wireless NIC for Jetson Nano, WiFi/Bluetooth (Jetson Nano WiFi/Bluetooth)
Description: 

AC8265 Wireless NIC, 2.4G / 5G WiFi, Bluetooth 4.2, Applicable For Jetson Nano.
This is a dual mode wireless NIC module applicable for Jetson Nano, supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2.

Specifications:

  • Chip: Intel 8265AC
  • Bands: 2.4GHz / 5GHz
  • Speed: 300Mbps / 867Mbps
  • WiFi protocol: 802.11ac
  • Bluetooth version: 4.2
  • NIC interface: NGFF (M.2)
  • Antenna interface: IPEX connector
  • Supported OS: Linux, Windows 10/8.1/8/7
  • Dimensions: 22mm × 30mm × 2.4mm


What's In the box ?

  1. Wireless-AC8265 x1
  2. Antenna x2
  3. IPEX to SMA cable x2















R349.90  Inc VAT
Per Page      1 - 8 of 8
  • 1