Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R1,049.90  Inc VAT
R529.90  Inc VAT
The Raspberry Pi Zero v1.3 comes equipped with a special mini camera port which is smaller than the standard camera connector
R45.39  Inc VAT
This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable.
R64.90  Inc VAT
R109.96  Inc VAT
Raspberry Pi High Quality camera board (HQ camera)
Overview

The Raspberry Pi High Quality Camera is the latest camera accessory from Raspberry Pi. It offers higher resolution (12 megapixels, compared to 8 megapixels), and sensitivity (approximately 50% greater area per pixel for improved low-light performance) than the existing Camera Module v2, and
is designed to work with interchangeable lenses in both C- and CS-mount form factors. Other lens form factors can be accommodated using third-party lens adapters.

The High Quality Camera provides an alternative to the Camera Module v2 for industrial and consumer applications, including security cameras, which require the highest levels of visual fidelity and/or integration with specialist optics. It is compatible with all models of Raspberry Pi computer from Raspberry Pi 1 Model B onwards, using the latest software release from www.raspberrypi.org.(1)

The package comprises a circuit board carrying a Sony IMX477 sensor, an FPC cable for connection to a Raspberry Pi computer, a milled aluminium lens mount with integrated tripod mount and focus adjustment ring, and a C- to CS-mount adapter.

(1) Excluding early Raspberry Pi Zero models, which lack the necessary FPC connector. Later Raspberry Pi Zero models require an adapter FPC, sold separately.

Specifications

Sensor:Sony IMX477R stacked, back-illuminated sensor
12.3 megapixels
7.9 mm sensor diagonal
1.55 μm × 1.55 μm pixel size
Output:RAW12/10/8, COMP8
Back focus:Adjustable (12.5 mm–22.4 mm)
Lens standards:C-mount
CS-mount (C-CS adapter included)

IR cut filter:
 Integrated(2)
Ribbon cable length:200 mm
Tripod mount: 1/4”-20

Compliance:
FCC 47 CFR Part 15, Subpart B, Class B Digital Device
Electromagnetic Compatibility Directive (EMC) 2014/30/EU
Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
Production lifetime:The Raspberry Pi High Quality Camera will remain in production until at least January 2026

(2) Can be removed to enable IR sensitivity. Modification is irreversible.

Physical specifications



SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product, please observe the following:
• Before connecting the device, shut down your Raspberry Pi computer and disconnect it from
external power.
• If the cable becomes detached, pull the locking mechanism forward on the connector, insert the ribbon
cable ensuring the metal contacts face towards the circuit board, then push the locking mechanism back into place.
• This device should be operated in a dry environment at 0–50°C.
• Do not expose it to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose it to excessive heat from any source.
• Care should be taken not to fold or strain the ribbon cable.
• Care should be taken when screwing in parts or fitting a tripod. A cross-thread can cause irreparable damage and void the warranty.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board
and connectors.
• Avoid handling the printed circuit board whilst it is powered and only handle by the edges to minimise the risk of electrostatic discharge damage.
• Store in a cool, dry location.
• Avoid rapid changes of temperature, which can cause moisture build up in the device, affecting
image quality.

How to use this camera: https://www.youtube.com/watch?v=sAXDgByhcJU

and another video by ETA PRIME: https://www.youtube.com/watch?v=VDWORgW31Sw




R1,049.90  Inc VAT
16mm telephoto camera lens (16mm telephoto lens)

ModelPT3611614M10MP
Image format1"
Focal length16mm
ApertureF1. 4-16
MountC
Field angle1"       44.6°  x 33.6°
2/3"    30.0° x 23.2°
1/1.8" 24.7° x 18.6°
1/2"    21.8° x 16.4°
Back focal length17.53mm
Optical length67.53mm
M.O.D.0.20m
Dimensions39.00 x 50.00mm
Weight133.7g
R1,049.90  Inc VAT
6mm wide angle camera lens (6mm wide lens)

ModelPT361060M3MP12
Focal length6mm
Resolution3 MegaPixel
ApertureF1.2
MountCS
Field angle DxHxV(°)63°
M.O.D.0.2m
Back focal length7.53mm
Dimensions30 x 34mm
Weight53g
OperationManual
R529.90  Inc VAT
Raspberry Pi Zero Camera Cable - 150mm (zero cam cable 150mm)

The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard connector for the Raspberry Pi Camera and Noir Camera! So how do you connect to it? With this special camera cable designed specifically for the Raspberry Pi Zero of course! This is an extra long version, with a 150mm total length!

Just plug it into your Pi Zero's camera port and then the other end into one of the official Pi Cameras for photo & video fun time!

The Raspberry Pi Zero v1.3 comes equipped with a special mini camera port which is smaller than the standard camera connector
R45.39  Inc VAT
Raspberry Pi Camera Board Replacement Cable 300mm (Cam cable 300mm)
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
 
This replacement cable is 300mm long.
 
The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 300mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: +80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2 
R29.90  Inc VAT
WS Raspberry Pi Camera Board V2 (8MP,1080p) (Camera 8MP)

The Raspberry Pi Camera Module V2 is the new and improved official camera board from the Raspberry Pi Foundation! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor. A 150mm CSI cable is included with every camera.

The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

The Raspberry Pi Camera Board V2 Features:

  • Fixed focus lens on-board
  • 150mm CSI camera cable included
  • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
  • Supports 1080p30, 720p60 and 640x480p90 video
  • Size 25mm x 23mm x 9mm
  • Weight just over 3g
  • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
  • Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system

Note: to use the camera with Raspberry Zero, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Getting started with PiCamera
R479.90  Inc VAT
WS Raspberry Pi "NoIR" Infrared Camera Board V2 (8MP,1080p) (camera NOIR 8MP)

The NoIR Camera V2 is the “night vision” version of the official camera board released by the Raspberry Pi Foundation. The Raspberry Pi NoIR Camera Board V2 has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi  NoIR Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.

The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.

The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. 

The Raspberry Pi NoIR Camera Board V2 Features:

  • No IR Filter - Great for Low Light Conditions
  • Includes Blue Filter
  • Fixed focus lens on-board
  • 150mm CSI camera cable included
  • 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
  • Supports 1080p30, 720p60 and 640x480p90 video
  • Size 25mm x 23mm x 9mm
  • Weight just over 3g
  • Connects to the Raspberry Pi board via a short ribbon cable (supplied)
  • NoIR Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system
Getting started with PiCamera

Note: to use the camera with Raspberry Zero v1.3, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable
R499.90  Inc VAT
Raspberry Pi Camera Board Replacement Cable 500mm (Cam cable 500mm)
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 500mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
 
This replacement cable is 500mm long.
 
The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 500mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: +80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2 
R22.90  Inc VAT
WS Raspberry Pi Night Vision Camera (IR-CUT) (Night Vision IR-CUT)

Features

  • Raspberry Pi Camera, supports all revisions of the Pi
  • Embedded removable IR-CUT filter, eliminating color distortion in the daylight
  • Comes with infrared LED, supports night vision
  • 5 megapixel OV5647 sensor
  • Adjustable focus distance
  • Camera specifications
    • CCD size : 1/4inch
    • Aperture (F) : 1.8
    • Focal Length : 3.6mm
    • Angle of View (diagonal) : 75.7 degree
    • Sensor best resolution : 1080p
  • 4 screw holes
    • Used for attachment
    • Provides 3.3V power output
    • Supports connecting infrared LED and/or fill flash LED
  • Dimension: 31mm × 32mm

Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable


Development Resources

Getting started with PiCamera
Wiki :
www.waveshare.com/wiki/RPi_IR-CUT_Camera

R439.90  Inc VAT
Raspberry PI Camera Cable Joiner/Extender (Cam cable joiner/extender)

PLEASE NOTE: Pic is for demonstration purposes only
Ribbon Cables are NOT included, this is the adaptor board only!


This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable on Raspberry Pi B/B+/2/3 and Pi Zero using multiple cables!

The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that's simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as you'll need!

Features:

  • 1mm Pitch
  • 15 Way Flat Cable Connector Female to Female
  • Designed for Raspberry Pi Camera Cables

Raspberry Pi B/B+/2/3 - You will need 2 standard Raspberry Pi Camera Cables + One Extender Board.

Raspberry Pi Zero -You will need one Pi Zero Camera Cable + Standard Raspberry Pi Camera Cable + One Extender Board.

This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable.
R64.90  Inc VAT
Raspberry Pi Camera Board Replacement Cable 1000mm (Cam cable 1000mm)
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 1000mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
 
This replacement cable is 1000mm long.
 
The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 1000mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: +80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2 
R39.90  Inc VAT
Discontinued: ModMyPi - PIR Night Vision Camera Box Bundle - B+/2/3 (AW C2 night vision camera case)

Our camera boxes just keep getting better! This all new Camera Box features mounting for our Night Vision Camera and a PIR motion sensor! Watch out Mr Fox!

This bundle includes a specially designed black matte Pi Camera Box Case, Camera Box Wall Mount and an HC-SR501 PIR Motion Sensor. The Night Vision Camera is NOT included.

Compatible with the following Camera Modules (Sold Separately):

This camera is NOT compatible with the IR-Cut Night Vision Camera

The flexibility of this design is ideal for using a Raspberry Pi and its camera module in a variety of applications such as security at a night, process monitoring, computer vision, high-definition time lapses, motion sensing and many other fun projects.

The 'PIR Night Vision Camera Box' is designed for hosting a Raspberry Pi computer and a Pi Nightvision Camera module together in a compact and versatile enclosure. This all-integrated design ensures that the camera's fragile ribbon cable doesn't get damaged while exposed during operation. The black matte case is opaque, ensuring that the red led mounted on the Pi Camera module will not affect the ambient light captured by the camera. The back of the 'Pi Camera Box' can accept an optional wall-mounting bracket for permanent installations. This edition features an HC-SR501 PIR Motion Sensor so it's great for security or recording animal nightlife!

Features:
  • Includes an HC-SR501 PIR Motion Sensor and jumper cables for connection & mounting
  • Black matte acrylic
  • Assembly time: about 10 minutes
  • Access to all of Pi's connectors
  • Features vents to keep your Pi cool
  • Features a slot for a GPIO ribbon cable
  • Dimensions: 101mm x 98mm x 37mm
  • 3mm thick black acrylic case
  • 4 x rubber feet

Camera Box Wall Mount

The Raspberry Pi Camera, enclosed with the Pi in the Camera Box, is a very capable surveillance and monitoring system that is easy to connect and program. To make the most of it, the Pi Camera box should be steadily mounted to a wall or a ceiling and should be properly angled. This bracket allows tilting and swiveling of the device. Just tighten the thumb screws when you have found the right position and you're done.

Features:

  • Bracket max. weight: up to 3.5kg (7.7 lbs)
  • Wall / ceiling mounting screws
  • Tilt angle: -24° to +15°
  • Swivel angle: ~75° left and right
  • Thumb screws for easy angle adjustments

Tutorials:

Night Vision Camera Box Assembly Guide

R319.90  Inc VAT
SG90 Servo bracket for Pan/Tilt Camera Platform (bracket only pan/tilt)
  • Specially designed for R/C car and robotics projects
  • pan/tilt 180 degrees
  • hold ultrasonic sensor, IR sensor, camera or other sensors.
  • suitable for use with SG90 servos

Packing List
1 x Cradle head parts
1 x Pack of screws
R19.90  Inc VAT
Camera Module for Raspberry Pi Zero without infra-red filter (zero cam NOIR)

This minimal Camera for the Pi Zero is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there Lennie.

Otherwise it's an economical and svelte solution for birdcams, bodycams, home security and simple computer vision projects.

Update: Without an IR filter, which is useful for night vision, especially when using IR lights to illuminate the subject

Only for Raspberry Pi Zero with CSI camera port.

Approx dimensions of camera: 10mm x 11.4mm x 5.1mm

Getting started with PiCamera

R299.90  Inc VAT
camera module OV7670 Supports VGA CIF auto exposure control display active size 640X480 for Arduino (Arduino camera)
Description
OV7670 image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. Through theSCCB bus control, you can output the entire frame, sub-sampled, take the window way affect the data resolution of 8 bits. VGA image of the product is up to 30 frames / sec. Users can fully control the image quality, data format and transmission mode. The process of image processing functions including gamma curves, white balance, saturation, chroma, and so can beprogrammed through the SCCB interface. OmmiVision image sensor applications unique sensor technology to improve image quality by reducing or eliminating the optical or electronic defect, such as fixed pattern noise, tail-blooming, clear and stable color image.



High sensitivity for low-light applications
Low voltage suitable for embedded applications
Standard SCCB interface compatible with I2C interface
RawRGB to RGB (GRB4: 2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2)output format
support VGA, CIF, and from CIF to 40x30 the size
VarioPixel subsampling way
eliminate light stripes, automatic black level calibration image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP has eliminate noise and dead pixel compensation function
support image scaling
The lens is the loss of light compensation
50/60Hz detection
the saturation automatically adjust ( UV adjustment)
edge enhancement automatically adjust
Noise Reduction automatically adjust
key parameters
photosensitive array 640X480
IO voltage 2.5V to 3.0V ( internal LDO to core supplies ) the
power operation 60mW/15fpsVGAYUV
Sleep < 20 μ A
temperature operation from 0 ° C to 50 ° C
( 8 -bit) output format ? YUV/YCbCr4 RGB565/555/444 GRB4: 2:2: 2:2 Raw RGB Data
Optical size of 1/6 "
field of view angle of 25 °
maximum Zhen rate 30fps VGA
Sensitivity 1.3V / (Lux-sec)
signal to noise ratio of 46 dB
dynamic range of 52 dB
browsing mode progressive
electronic exposure
area of 3.6 μ mx 3.6 μ m
dark current 12 mV / s at 60 ° C

Package Includes:

1 x camera board

How to Use OV7670 Camera Module with Arduino


R79.90  Inc VAT
Magnetic Wide Angle Lens (lens wide angle )

The Raspberry Pi's camera offers great features out-of-the box, which can be enhanced by adding interchangeable lenses.

This wide angle lens will allow you to capture more of the scene in your photo. Perfect for getting those beautiful landscape shots.

Each lens comes with the following:

  • Lens cap
  • Key-chain attachment
  • Self-adhesive metal ring mount

Please note: These lenses are designed to be attached to a case, using the self-adhesive metal ring. They do not attach directly the the Raspberry Pi camera!

R109.96  Inc VAT
Raspberry PI official camera adjustable mounting bracket (camera mount plates)
  • Allows four different angles of repose.
  • Four Screws to secure your camera
  • Made from black acrylic
  • hole for tripod mounting.

Compatible with the Raspberry Pi Camera Module V2 and NoIR Camera V2 “night vision”
R29.90  Inc VAT
Wide Angle – Camera Module for Raspberry Pi Zero (zero cam wide angle)

This minimal camera for the Pi Zero (or Pi Zero W) is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there, Lennie!

Otherwise it's an economical and svelte solution for bird box cameras, body-cams, home security, and simple computer vision projects.

Now with 160 degree wide angle lens

Features

  • 5MP sensor, 2592x1944 pixels (same as version 1 official Pi camera)
  • 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
  • f2.9 lens, 3.60 mm focal length
  • 53.50 degrees horizontal, 41.41 degrees vertical field of view (standard and no IR filter versions)
  • Approx. dimensions of circuit and camera: 60 x 11.4 x 5.1mm

Notes

  • Only for Raspberry Pi Zero or Zero W with CSI camera port
  • Raspberry Pi Zero not included

Getting started with PiCamera
R339.90  Inc VAT
The PiHut 3 in 1 Camera Lens Set (PiHut camera lens kit)

This lovely little lens set is the best way to expand the field of view of your Raspberry Pi camera! 

This lens kit means that you can use your camera module in many exciting ways:

  • 1x Wide-angle lens: Ideal for capturing those landscape shots/night sky time-lapses
  • 1x Macro lens: Beautiful close-up images of anything from insects to circuit boards
  • 1x Fish-eye lens: Security systems and crazy 180° FOV shots

Perfect for taking shots from anywhere from your desk to the edge of space this lens comes with a back splint which means you can also use it with other camera devices such as your mobile phone.

Each lens screws into the clip which fits perfectly onto your camera module.



We gave Dave Ackerman (of space Babbage fame) a lens to take on his trip to Spain with The Register so it's even been tested in space (well nearly)!

  • Compatible with the known universe *
  • High-class glass lens, high clarity.
  • No vignetting or dark circle.
  • Lens covers to protect the camera lenses
  • Material: ABS & aluminum alloy
  • Compatible with the official Raspberry Pi Camera Modules

* well most of it, we think.

R149.90  Inc VAT
Raspberry Pi Camera Board Replacement Cable 150mm (Cam cable 150mm)
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
 
This replacement cable is 150mm long.
 
The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 150mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: +80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2 
R9.90  Inc VAT
Per Page      1 - 20 of 41