Search
Search Criteria
Products meeting the search criteria
13.3inch IPS screen, 1920x1080 high resolution. Toughened class cover. Supports Raspberry Pi and can also be used as a computer monitor.
Features
- 13.3inch IPS screen,1920x1080 high resolution
- Toughened glass capacitive touch panel, 6H hardness
- Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
- When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free
- When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
- Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
- 3.5mm audio jack, supports HDMI audio output
- Embedded ferrite Hi-Fi speaker
- Also supports VGA input (specific cable is required and should be purchased separately)
- 75x75mm spacing mounting holes (M4 screw hole) for general wall mount
- Comes with 75° tilt angle stand
External Dimension

Development Resources
Wiki : www.waveshare.com/wiki/13.3inch_HDMI_LCD_(H)_(with_case)
- 7inch IPS screen, 1024x600 hardware resolution
- Capacitive touch control
- Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
- When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
- When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
- Backlight can be turned off to lower power consumption
Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable
Wiki : www.waveshare.com/wiki/7inch_HDMI_LCD_(C)
FAQ- Why the LCD doesn't work with my Raspbian?
- To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly. - Why the LCD still doesn't work with the Waveshare provided image?
- Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. - Which power supply should I use?
- It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.
For more info, please check the wiki page.
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad.
The screen looks much nicer, with a black bezel and glass overlay.
This updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A , B ! (Any Pi with a 2x20 connector) Not for use with an old Pi 1 with 2x13 connector. This version also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath.
The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.
Use it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.
Raspberry Pi computer and enclosure not included! As of July 22nd, 2015 this display comes fully assembled with tactile switches too
TECHNICAL DETAILS
- Screen Dimensions: 50mm x 69mm x 4mm / 2" x 2.7" x 0.16"
- PCB Dimensions: 56mm x 85mm x 11mm / 2.2" x 3.3" x 0.4"
- Weight: 47g
Datasheets, EagleCAD PCB files, Fritzing object and more in the tutorial!


Device & System Support

Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports all versions of Raspberry Pi

Connection Examples
Raspberry Pi 3/4


Raspberry Pi ZERO W/WH

Jestson Nano

Mini PC

Appearance and Dimensions

Resources & Services

Connection Examples
Working with Raspberry Pi 4
Working with Raspberry Pi Zero W
IPS Panel
Touch Control
Appearance and Dimensions

Device & System Support
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free

Touch Control

up to 5-points touch, depending on the operating system.

Appearance and Dimensions


(**NB - Upon assembly - please make sure that the display ribbon is the right side up, which is showed below in the first picture (DISPLAY RIBBON CABLE DISPLAYED ON RIGHT HAND SIDE) with the ribbon copper side facing up - black side facing down against the display board.**))


(* Please note that this 7inch Display is only compatible with the Raspberry Pi4 *)

Device & System Support
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free

Touch Control

up to 5-points touch, depending on the operating system.

Appearance and Dimensions

The Capacitive Fingerprint Reader (B) is a fast and stable capacitive fingerprint module specialized for secondary development, suits integration applications.
By incorporating high performance Cortex core processor, high security commercial fingerprint algorithm, and advanced semiconductor fingerprint sensor, this module is designed as a intelligent integration module with functions including fingerprint enrolling, image processing, template generating and storing, fingerprint matching and searching, etc.
- Easy to use by some simple commands, you don't have to know any fingerprint technology, or the module inter structure/calculation
- Commercial fingerprinting algorithm, stable performance, fast identification
- Sensitive detection, just touch the collecting window lightly, without pressing
- Allows to freely input/output fingerprint images, fingerprint feature file and other fingerprinting actions
- Dual communication, UART or USB
- Comes with rich development resources (related command documents, tools, and examples for Raspberry Pi/Arduino/STM32)
parameter | value |
---|---|
Sensor | Semiconductor (capacitive) |
Module dimension | 34 × 28.5mm |
Sensor dimension | 33.4 × 20.4mm |
Image | DPI 508 |
Image resolution | 208 × 288 |
Greyscale | 256 (8-bit) |
Sensing area | 14.6 × 10.6mm |
Fingerprint capacity | 3000 |
Security level | 1-5 configurable, 3 by default the higher value, the lower FAR (False Acceptance Rate), yet the higher FRR (False Rejection Rate) |
Encryption key | 64-bit encryption |
Image collecting rate | 20fps |
Matching time | 0.5s |
Dynamic current | <40mA |
Operating voltage | 3.3-5V |
Communication port | UART or USB |
ESD | SD IEC 61000-4-2 LEVEL 4 positive/negative 15KV air discharge |
Baudrate | configurable: 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600bps 115200bps by default |
What's in the box?
1 x UART/USB finger print sensor
Outline dimensions

1024×600, 7-inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. Toughened glass capacitive touch panel, 6H hardness. It supports Raspberry Pi and can also be used as a computer monitor.
Features
- 7inch IPS screen, 1024x600 hardware resolution, configurable by software. (up to 1920x1080)
- Toughened glass capacitive touch panel, 6H hardness. (case version only)
- Supports popular mini PC such as Raspberry Pi, BB Black, Banana Pi.
- Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, driver free.
- Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
- It has a 3.5mm audio jack and supports HDMI audio output
- Supports VGA input (specific cable is required and should be purchase separately)
- High-quality PC case, optional tilt angle: 30°/50°.
What's in the box ?
- 7inch HDMI LCD (H) x1
- HDMI cable x1
- HDMI to Micro HDMI Adapter x1
- USB type A plug to micro B plug cable x1
- RPi screws pack (4pcs) x 1
- Quick start sheet x1
Resources : ( Calibration for touch, Working with Windows, Raspberry Pi , Jetson Nano etc.)
Wiki: www.waveshare.com/wiki/7inch_HDMI_LCD_(H)







Description:
Maker Soil Moisture Sensor measures soil moisture by capacitive sensing, where the presence of water in the soil will increase the probe capacitance. The output of the sensor is analog output; higher moisture levels will produce lower output voltage. Being part of the Maker Series, the sensor is equipped with many features to further simplify digital making for beginners and experts alike.
The Maker Soil Moisture Sensor is easy to use. It only needs a power supply, if the LED indicators alone are enough for your application. Make sure that the voltage level of the power supply is within the sensor specifications. Note that the LED indicators only indicate approximate moisture levels and might fluctuate depending on the power supply, since the sensor does not have a voltage regulator on board.
Full Tutorial: Battery Powered Maker Soil Moisture Sensor

Full Tutorial: Self Watering Pot Featuring Maker Soil Moisture Sensor
Features:
Operating Voltage: 2.5V - 7.0V.
Output: Analog Voltage (Higher moisture = lower voltage)
Grove port.
LED indicators for dry/moist/wet soil moisture levels.
Soil Limit (Maximum depth of the probe)
Double-sided probe (More sensitive to moisture changes)
Capacitive sensing probe (Corrosion resistant)
Disable pin (Power-saving application)
Example Applications:
Soil moisture detection
Automatic Plant Watering System
Smart/IoT Gardens

Resources:
What's in the box?
1 x Sensor
1 x 50 cm Grove cable
10.1inch Capacitive Touch Screen LCD (E), 1024×600, HDMI, IPS, 10-Points Touch, Fully Laminated Screen, Supports Raspberry Pi, Jetson Nano, And PC

Size![]() 10.1" | Resolution![]() | Display Port![]() | Display Panel![]() | Viewing Angle![]() |
Touch Type![]() | Touch Points![]() | Touch Port![]() | Touch Panel![]() | Touch Panel Tech![]() |
OSD Menu![]() | Audio Output1![]() | Audio Output2![]() | Gaming![]() |

Supports Raspbian, 10-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports all versions of Raspberry Pi
Working With Raspberry Pi 4

Working With Raspberry Pi 3B
Working With Raspberry Pi Zero W

Working With AI Computer Jetson Nano

Working With Mini PC

IPS Panel



1) up to 10-points touch, depending on the operating system. 2) up to 6H hardness toughened glass panel. 3) fully laminated screen, better display experience, dust-proof.


* audio output from earphone jack and speaker header.

What's in the box?
Weight: 0.598 kg
- 10.1inch HDMI LCD (E) x1
- HDMI cable x1
- HDMI to Micro HDMI Adapter x1
- USB-A to Micro-B cable x1
- 1