Search
Search Criteria
Products meeting the search criteria
16GB Sandisk Micro SD card preinstalled with the Raspberry Pi OS. Perfect for both the Raspberry Pi 4 Model B, Raspberry Pi 3 or Raspberry Pi Zero.
- This is the hard drive and operating system for your Raspberry Pi
- Extended partition to make full use of the SD card
- Ready to use – plug it in and you’re ready to go
- Only the most current stable release of the operating system will be used
- High quality MicroSD card
1 x Sandisk 16GB uSD preloaded with Raspberry Pi OS
1 x Jewel case
1 x SD Adapter
Resources:
Latest image and tools are available from the Raspberry Pi Foundation Downloads
Description:
The Official Raspberry Pi Zero & Zero Wireless Case is now available! Specially made and beautifully crafted in red & white, this nifty and tactile snap-together case is designed to protect your Zero!
The case comes with three swappable lids, each with a different function:
- Raspberry Pi Camera lens holder lid with included extra short 35mm Raspberry Pi Zero camera cable(This cover is for the normal Raspberry Pi camera. The zero camera lens is to small to fit snugly.)
- GPIO access lid, with GPIO hole for all your hacking needs
- Solid lid, for those who want an all around protected Zero!
The Official Raspberry Pi Zero Red & White Case Features:
- Fabulous Raspberry Red and White Colour Combination
- 2 Part "Snap-Fit" Enclousure, with 3 separate lids (GPIO/Camera/Solid)
- Underside slot for GPIO access
- Cut-outs for all connection points
- No SD card access (keeps your card protected!)
- Included 4 x Stick on rubber feet for case stability
Some mini-HDMI cables will need to have their shroud's cut down to fit the official case.
What's in the box:
1 x Raspberry Pi Zero Red & White Case
RASPBERRY PI NOT INCLUDED - Redesigned case now has sufficient space for heat sinks
The One Nine Design Raspberry Pi Case is a three piece, stylish case designed to keep your Raspberry Pi safe but enable easy access to the GPIO. It comes in three pieces:
- A moulded base, with airflow holes and 55mm spaced M3 mounting holes
- A slot over cover, which fits over the Pi, enclosing it, but leaving all ports like the GPIO free for hacking.
- A cover piece, which clips in and protects the Pi from dust and exposure.
This case also features two slots for holding the Raspberry Pi Camera module!
Specifications:- 3 Piece "Easy-Access" Design
- Embossed Raspberry Pi Logo
- SD Card Access
- Clip Shut Case
- Labelled Ports
- Top & Side Location Camera Holder
- Non Slip Feet
- 55mm M3 Mounting Holes
- Full Gloss ABS Plastic
- External Height: 31mm
- External Width: 64mm
- External Length: 95mm
- ROHS Compliant
- 1 x One Nine Design Case
MODULAR CASE NOT INCLUDED
The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.
The USB/HDMI security cover is a dual-use shroud that can be utilised to protect access to all the external inputs and outputs. Two covers can be used simultaneously if only very limited access is required, and “punch-out” access hatches are available for both the Ethernet and Micro USB power port if these inputs are required. Security covers are tamperproof and can only be removed from inside the case.
In addition to protecting the Raspberry Pi ports, the shroud is offset from the body by 12mm. The enables the secure, internal and protected use of up to four nano USB dongles with the cover installed.
Specifications:- Dual-Use - Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
- Secure and Tamper-Proof
- RJ45 & Micro USB Power Breakout Hatches
- Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
- 1 x USB/HDMI Cover
If you want to mount your Modular Raspberry Pi Case to a TV or monitor, we have two mounts available depending on your VESA spacing requirements:
- The VESA Splash (a 4-point 75/100mm mount) (this item)
- The VESA Slice (a minimal 75/100/200mm mount)
- Four bolting points
- MIS-D 75mm & MIS-D 100mm Spacing (M4)
- Great for media & signage applications e.g. hiding a TV or monitor
- Made from laser-cut Perspex
Kit Contents
- 4 x M4 Bolts
- 4 x M4 Washers
The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look and adaptability make it perfect for many applications.
These spacers increase the internal height of the case by 10mm per spacer and can be stacked to increase the headroom further e.g. 2 spacers would be 20mm extra. Up to 5 spacers can be used, using longer screws if the case needs to be secured.
The spacers are compatible with both our Raspberry Pi 2/3 Modular case and the new Raspberry Pi 4 version.10mm Stackable Spacers Features
- Spacers raise the internal height by 10mm enabling the case to grow with your project
- Spacers can be stacked, increasing the internal height by up to 50mm
Screw Size Guide
Depending on the number of spacers required, the length of the screw required will change.
Below is a table showing the use of up to 5 spacers with corresponding screw lengths. We currently stock 3 screw lengths which are linked below.
Screws types compatible with spacers plates are both No.4 (US) and M3 (UK/EU).
No. of Spacers | Screw Length Required (mm) |
0 | 28 (Included with Case) |
1 | 38 |
2 | 48 |
3 | 58 |
4 | 68 |
5 | 78 |
The Modular Raspberry Pi Case is designed to be fully customisable by the user, and adaptable to suit a range of requirements. The streamlined look, and adaptability makes it perfect for many applications, including: the hobbyist maker, digital signage, industrial protection, living-room & child-friendly media centres, classroom eduction, workshops and many more! All add-ons are designed to be interchangeable and can be added and removed when required.
- Dual-Use - Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
- Secure and Tamper-Proof
- RJ45 & Micro USB Power Breakout Hatches
- Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
PLEASE NOTE: Raspberry Pi not included.
Description:
The Official Raspberry Pi 3 Model B Case is now available! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your RPi 3! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!
Features of the Official Raspberry Pi Case
Fabulous Raspberry Red and White Colour Combination
5 Part "Snap-Fit" Enclosure
Cut-outs for all connection points
Micro SD card cut-out
Plastic LED light protector
Stick on rubber feet for case stability
Description:
It's easy to set up, features a great resolution, comes complete with a black acrylic stand, and has touch by default!
Recent upgrades:
If you were used to seeing the Self Test at power on, this has now been removed. However if you remove the jumper located on the controller board you can re-enable this feature.
This device uses the Pi's HDMI output for display, and the Pi's USB port for touch control. Assembly of the Waveshare 10.1" screen is easy, just follow this simple guide here.
Please Note. This device does require some simple set up. You will need a UK to EU power adapter.
The LCD Screen Features:
- 10.1inch HDMI LCD (B)
- 1280x800 Resolution
- UK 5V 2A Power Supply Included
- Capacitive touch control
- Supports Raspberry Pi, Ubuntu, Windows 10 IoT driver free
- Can also be used as a computer monitor, supports Windows 10/8.1/8/7/XP etc.
- Supports BB Black, comes with Angstrom image
- HDMI interface for displaying, USB interface for touch control
- Input interfaces: HDMI
- Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
- Firmware is upgradable to support more new features (continually updated)
The Case Features:
- Material : High quality black and clear Acrylic
- Comes with bottom holder, 45° tilt angle
- Features mounting holes for Raspberry Pi 3B/2B/B /A /B, and BB Black
Troubleshooting:
For the Windows OS on PC, the resolution of the LCD is automatically identified. Hence, you do not need to make the relative settings. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work.
If the display in not working correctly or not displaying at all, you may need to edit setting in the config file.
sudo nano /boot/config.txt
And add the following to the end of the file:
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1280 800 60 6 0 0 0
hdmi_drive=1
If this does not ressolve the problem then use the following instead:
max_usb_current=1
hdmi_group=2
hdmi_mode=27
hdmi_drive=1
What's in the box?:
1 x HDMI 10.1" Touch Screen
1 x Acrylic panels
1 x HDMI cable
Resources:
User Manual
Quick Assembly Guide
Spice up your Flick Large board with a stylish white and orange Flick Large case! This vibrant and durable case is made up of two parts; an orange base and a slide-on white lid.
This lid can be used in two different setups in either an open or closed position. This allows you to hide your I2C device and Flick Large, or keep it visible to the world. Flick works through materials such as acrylic, wood and glass so our plastic case (even when the lid is in the closed position) will not negatively impact any of the fun you can have with Flick!
GPIO access and suction cups
The Flick Large case features four suction cups for installation in the bottom four corners of the case. Use the suction cups to mount the case onto many different surfaces such as glass, plastic, or wood and still be removed easily.
Perhaps you want to set up your Flick Large & I2C device to only allow entry through a door if you swipe the right pattern - with this case, you could mount it right next to the door without the need to drill any holes or hammer any nails.
Features:
- 4 x suction cups
- 1 x orange base
- 1 x white lid
- Dimensions:19cm x 12.5cm x 1cm
Case assembly guide
Need help assembling your Flick Large case? Check out our quick start and FAQ page here that will guide you through the process of piecing it together.
Flick Software
Visit our Flick GitHub page and acquire all the software you need to get up and running with your brand new Flick Large & Case.
Protect your Pi Zero W in style with the Pibow Zero W case, in beautiful berry colours - red, purple, and blue!
Note that this is the case for the Raspberry Pi Zero W only. This case is not compatible with the Pi Zero v1.2/1.3. Does not include a Raspberry Pi Zero W!
Features
- Compatible with Raspberry Pi Zero W
- Super-slimline profile
- Fully HAT/pHAT compatible
- Protects your beloved Pi Zero W!
- Clear top and base leave Raspberry Pi Zero W visible
- GPIO cut-out
- Leaves ports and GPIO accessible (encloses micro SD and blocks RUN/TV header)
- Made from lightweight high-quality cast acrylic
- Great for hacking and tinkering!
- Made in Sheffield, UK
Crafted out of four unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Zero W while leaving the primary ports and GPIO accessible.
This case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly (check out the exploded diagram on this page for tips on assembly, or our tutorial).
A tiny and lovely clear acrylic enclosure for the newest raspberry pi zero W. It designed to be beautiful, light, and easy-assembly. Perfect for any use (but especially for those who want to carry their Pi around in their pocket!). This enclosure is only compatible with the Raspberry Pi Zero W! The case is as minimal as it gets coming in just two pieces of acrylic that secure with four screws. Made of crystal-clear acrylic, this case keeps the Pi Zero W secure.
There are two USB holes and one cooling hole, you can use all of the connectors on the edges of the Pi: mini HDMI, micro SD slot, micro USB power, and micro USB port. There's also a cut out to allow a 2x20-pin header to be soldered onto the Pi Zero W.
Features:
1. Easy to assemble
2. 2 layers, 4 bolts, spacers and nuts included
3. Will fit Raspberry Zero & Zero W
Notes:
Only includes the case. RPi Zero is not included.
Don't forget to remove the protective film from the acrylic.
Package Includes:
1x Clear Acrylic Case heat sink
As you know, most of the Sonoff products are not DIN rail mounted, which makes it difficult to put the Sonoff products into the switchboard. We have now launched another inexpensive and practical accessory - Sonoff DR - DIN Rail Tray.
Sonoff DR can work with most of our Sonoff products, including Sonoff Basic, Sonoff RF, Sonoff Pow, Sonoff TH10/16, Sonoff Dual, Sonoff G1.
The installation is very simple. The Sonoff DR has a blue part, which allows you to push fit the switch to DIN rail or pull to remove it. No external tools are required.
The material is fire-retardant ABS and the fire rating is V0. The Sonoff DR comes with 4 x M3 screws, which perfectly fit Sonoff's original holes.
Package includes:
1 x Sonoff DIN Rail Tray
4 x M3 screws
This Lithium Ion Battery Holder has slots for two 18650 Li-Ion batteries, with simple bare connectors for integrating it into projects as a portable battery pack.
This provides greater power for electronic projects
Specifications:
Battery type: 4 pcs 18650 Case Holder
18650 Battery Holder Case with 6 inch leads for soldering / connecting
Takes 4 standard size 18650 batteries side by side to form a compact battery of 3.7V rechargeables
Keep your batteries organized and protected
Batteries not included
Package includes:
1 x Battery Holder Case for 4 x 18650
Why not protect your Micro: bit development board with these adorable silicone cases? Now we have the cute silicone case that can protect your Micro: bit from external wear. It also can prevent your board from wires that might short it out while still allows full access to the board. It is easy to use, just slide your boards into the case and it envelops and protects the entire electronic components. Sliding in the white terminals protector to prevent the terminals from shorting.
The case has slots to access the USB port, buttons and JST connectors. It’s especially designed to allow the on-board LED matrix to be viewed when lighted up. It’s aimed to create a more interesting programming environment for children, getting rid of the past boring programming life.
Features:
Protect your micro:bit
Specifications:
- Product Size: 56mm x 45mm
- Thickness: 12mm
Note:
Micro:bit control board is not included
Package Inlcudes:
1 x Micro:bit Silicone Protective case
Why not protect your Micro: bit development board with these adorable silicone cases? Now we have the cute silicone case that can protect your Micro: bit from external wear. It also can prevent your board from wires that might short it out while still allows full access to the board. It is easy to use, just slide your boards into the case and it envelops and protects the entire electronic components. Sliding in the white terminals protector to prevent the terminals from shorting.
The case has slots to access the USB port, buttons and JST connectors. It’s especially designed to allow the on-board LED matrix to be viewed when lighted up. It’s aimed to create a more interesting programming environment for children, getting rid of the past boring programming life.
Features:
Protect your micro:bit
Specifications:
- Product Size: 56mm x 45mm
- Thickness: 12mm
Note:
Micro:bit control board is not included
Package Inlcudes:
1 x Micro:bit Silicone Protective case
13.3inch IPS screen, 1920x1080 high resolution. Toughened class cover. Supports Raspberry Pi and can also be used as a computer monitor.
Features
- 13.3inch IPS screen,1920x1080 high resolution
- Toughened glass capacitive touch panel, 6H hardness
- Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
- When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free
- When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
- Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
- 3.5mm audio jack, supports HDMI audio output
- Embedded ferrite Hi-Fi speaker
- Also supports VGA input (specific cable is required and should be purchased separately)
- 75x75mm spacing mounting holes (M4 screw hole) for general wall mount
- Comes with 75° tilt angle stand
External Dimension

Development Resources
Wiki : www.waveshare.com/wiki/13.3inch_HDMI_LCD_(H)_(with_case)
This product is protective case of Arduino MEGA2560 R3. It provides easy connection to other components. It is made by high grade acrylic providing protection for your Arduino
Feature:
Name: Arduino MEGA2560 R3 DIY acrylic case
Dimensions: 118 x 72 x 18mm
Weight: 72g
Material: A level acrylic
For Arduino MEGA2560 R3 Development Board only
Please Note:
Arduino Mega is not included.
Don't forget to remove the protective film from the acrylic parts.
Package includes:
1 x Transparent Acrylic case
Button/Coin compact design enclosure with On and Off Switch.
Perfect for soldering, perfect for robotic ,electronic, and restoration projects.
It can hold two CR2032 coin batteries.
Features:
Output: 6V
Color: Black
Model: For CR2032 x 2
Package includes:
1 x CR2032 Battery enclosure (Batteries not included)