Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Need to remove access to your uSD or USB ports? This is the case for you
R184.90  Inc VAT
R199.90
Upgrade your official RPi4 case with this fan and heatsink. Please note: The case is not included
R79.90  Inc VAT
Switched Battery Box 4xAA (6V) (switch batt box 4xAA)

Description:

This battery box is designed for use as a nice switchable, portable power pack, and fits any four alkaline or rechargeable AA batteries in series. The body is moulded in black ABS Resin and has a slide on detachable lid which can be locked for extra security through use of a small provided screw. It even includes a very useful miniature on-off slide switch which is very handy for wiring to projects that don't have a switch! Connection is via two flexible stranded red (positive) & black (negative) 26AWG wire leads, which are approximately 150mm in length.

The four batteries are held in series, for a nominal output of 6V DC (6.4V when fresh, 4V when dead), and 4.8V DC for rechargeables (5.2V when fully charged, 4.4V when discharged). Using rechargeables will make this work nicely with nearly any 5V project, with alkalines you may want to put a 1N4001 in series to drop the voltage from 6V down to 5.3V.
 
Specification
  • Battery Cell Size AA
  • Number of Cells 4
  • Body Material ABS Resin
  • Height 19.0 mm, Length 69.0 mm, Width 64.5 mm
  • Terminal Type Wire Lead
  • Type Battery Box
  • Weight 0.03300 kg
R14.90  Inc VAT
Plastic Battery Case For 4 x 18650 Batteries (4x18650 battery box)
Descriptions:

This Lithium Ion Battery Holder has slots for two 18650 Li-Ion batteries, with simple bare connectors for integrating it into projects as a portable battery pack.

This provides greater power for electronic projects

Specifications:

Battery type: 4 pcs 18650 Case Holder
18650 Battery Holder Case with 6 inch leads for soldering / connecting
Takes 4 standard size 18650 batteries side by side to form a compact battery of 3.7V rechargeables
Keep your batteries organized and protected
Batteries not included

Package includes:

1 x Battery Holder Case for 4 x 18650
R124.90  Inc VAT
Red Micro:bit Silicone Case (Red micro:bit case)
Description:

Why not protect your Micro: bit development board with these adorable silicone cases? Now we have the cute silicone case that can protect your Micro: bit from external wear. It also can prevent your board from wires that might short it out while still allows full access to the board. It is easy to use, just slide your boards into the case and it envelops and protects the entire electronic components. Sliding in the white terminals protector to prevent the terminals from shorting.
The case has slots to access the USB port, buttons and JST connectors. It’s especially designed to allow the on-board LED matrix to be viewed when lighted up. It’s aimed to create a more interesting programming environment for children, getting rid of the past boring programming life.

Features:

Food Grade Safety Silicone Materials
Protect Microbit from external wear
Protect your micro:bit

Specifications:

- Product Size: 56mm x 45mm
- Thickness: 12mm


Note:
Micro:bit control board is not included


Package Inlcudes:

1 x Micro:bit Silicone Protective case
R99.90  Inc VAT
Blue Micro:bit Silicone Case (Blue micro:bit case)
Description:

Why not protect your Micro: bit development board with these adorable silicone cases? Now we have the cute silicone case that can protect your Micro: bit from external wear. It also can prevent your board from wires that might short it out while still allows full access to the board. It is easy to use, just slide your boards into the case and it envelops and protects the entire electronic components. Sliding in the white terminals protector to prevent the terminals from shorting.
The case has slots to access the USB port, buttons and JST connectors. It’s especially designed to allow the on-board LED matrix to be viewed when lighted up. It’s aimed to create a more interesting programming environment for children, getting rid of the past boring programming life.

Features:

Food Grade Safety Silicone Materials
Protect Microbit from external wear
Protect your micro:bit

Specifications:

- Product Size: 56mm x 45mm
- Thickness: 12mm


Note:
Micro:bit control board is not included


Package Inlcudes:

1 x Micro:bit Silicone Protective case
R99.90  Inc VAT
CR2032 Button Battery Holder Case With On/Off Switch 6V (CR2032 double enclosure)
Description:

Button/Coin compact design enclosure with On and Off Switch.
Perfect for soldering, perfect for robotic ,electronic, and restoration projects.
It can hold two CR2032 coin batteries.

Features:

Output: 6V
Color: Black
Model: For CR2032 x 2

Package includes:

1 x CR2032 Battery enclosure (Batteries not included)
R21.90  Inc VAT
Yellow Micro:bit Silicone Case (Yellow micro:bit case)
Features:

Food Grade Safety Silicone Materials
Total protection for your micro:bit

Specifications:

- Product Size: 56mm x 45mm
- Thickness: 12mm


Note:
Micro:bit control board is not included


Package Inlcudes:

1 x Micro:bit Silicone Protective case
R99.90  Inc VAT
BBC Micro:bit Acrylic Case Transparent Clear (acrylic case micro:bit)
Features :

The case is accurate design for Micro:bit , leave all interface to access the main board.
It is the transparent acrylic material , so you can keep watch of the condition of your Micro:bit all the time. 
This case is quite easy to install .
There is a layer of protective film sticker on the surface of acrylic , please tear it up gently before you use it .
 
Specifications :

1. Structure : Cover board bottom board gasket ( 3 color to choose ) screw and nut
2. Material : Acrylic
3. Weight : 17g approx

We also have silicone cases for Micro:bit


R54.90  Inc VAT
Translucent Hard Plastic Case Holder Storage Box for AA AAA C battery (batteries not included) (battery storage box)
Please note: Batteries are not included.

Description :


Keep all your batteries in one place, dry, and safe. 
Made of hard material, durable and environmental
Fit for different kinds of batteries, such as AAA, AA.
Light weight
Can store 20 pcs AA size, 14pcs AAA size.
Individually spaced design

Specifications :  

Material : Plastic
Colour : Clear white
Size : 150mm x 90mm x 55mm (LxWxH)
Suitable for : Home, office, hobby, DIYproject
 
Package includes :  

1 x AA/AAA battery Plastic Case
R209.90  Inc VAT
Raspberry Pi4 model B official red/white case (Pi4 official red/white case)

Please note: The Raspberry Pi 4 model B board is not included with the case

Description:

Need to cool your RPi4 down? You might like the official case fan and heatsink add on.

The official Raspberry Pi 4 Model B  case in a stunning red & white design (also available in black & grey)

  • Optional clip-on lid provides protection but can be removed if using a HAT
  • All primary ports (including microSD) accessible
  • Snug and secure fit protects your Pi while looking great!
  • Anti-slip feet keep your Raspberry Pi stable
  • Power and activity lights still visible through the end of the case
  • High-quality, two-part ABS construction
  • Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.

What's in the box?

1 x Raspberry Pi Official Pi4 Case
R89.90  Inc VAT
Raspberry Pi4 model B official black/grey case (Pi4 official black/grey case)

Please note: The Raspberry Pi 4 model B board is not included with the case

Need to cool your RPi4 down? You might like the official case fan and heatsink add on.

Description:

The official Raspberry Pi 4 Model B  case in a stunning black & grey design (also available in red & white)

  • Optional clip-on lid provides protection but can be removed if using a HAT
  • All primary ports (including microSD) accessible
  • Snug and secure fit protects your Pi while looking great!
  • Anti-slip feet keep your Raspberry Pi stable
  • Power and activity lights still visible through the end of the case

What's in the box:

1 x Raspberry Pi4 model B case
R89.90  Inc VAT
Pibow Coupé 4 Red case (Raspberry Pi4 only) (Pibow Coupe Pi4 Red)
Description:

Pibow Coupé 4. The slim, hackable, and attractive case for the Raspberry Pi 4! 
Note: This Pibow Coupé is only compatible with the Raspberry Pi 4!

Features

  •     Compatible with Raspberry Pi 4 only
  •     Cutout in lid for 40x30mm heatsink or Fan SHIM
  •     Super-slimline profile
  •     Fully HAT-compatible
  •     Works great with standoffs!
  •     Protects your beloved Pi!
  •     Clear top and base (Ninja and Red) leave Raspberry Pi 4 visible
  •     GPIO cut-out
  •     Handy laser-etched port labels
  •     Leaves all ports accessible
  •     Made from lightweight, high-quality, cast acrylic
  •     Great for hacking and tinkering!
  •     Made in Sheffield, UK


Crafted out of five unique layers including a transparent top and base (Red and Ninja) that leave your beautiful Raspberry Pi 4 visible inside. Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 4 while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x15mm (WxLxH, not including bolt heads and nuts).
R179.90  Inc VAT
Pibow Coupé 4 Ninja Black case (Raspberry Pi4 only) (Pibow Coupe Pi4 Black)
Description:

Pibow Coupé 4. The slim, hackable, and attractive case for the Raspberry Pi 4!

Note: This Pibow Coupé is only compatible with the Raspberry Pi 4!

Features

  •     Compatible with Raspberry Pi 4 only
  •     Cutout in lid for 40x30mm heatsink or Fan SHIM
  •     Super-slimline profile
  •     Fully HAT-compatible
  •     Works great with standoffs!
  •     Protects your beloved Pi!
  •     Clear top and base (Ninja and Red) leave Raspberry Pi 4 visible
  •     GPIO cut-out
  •     Handy laser-etched port labels
  •     Leaves all ports accessible
  •     Made from lightweight, high-quality, cast acrylic
  •     Great for hacking and tinkering!
  •     Made in Sheffield, UK


Crafted out of five unique layers including a transparent top and base (Red and Ninja) that leave your beautiful Raspberry Pi 4 visible inside. Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 4 while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x15mm (WxLxH, not including bolt heads and nuts).
R169.90  Inc VAT
PoE HAT Case for Raspberry Pi 3/4 (V2.0) (Pi4 POE case)
Description

This Raspberry Pi PoE HAT case is our own design manufactured right here in our warehouse!

The case brings together the Raspberry Pi (4 or 3), and Official Raspberry Pi PoE HAT into one simple, neat package.

Designed to be stylish and functional, the PoE HAT Case features side and top 'hex' ventilation for the PoE HAT fan to keep your Raspberry Pi nice and cool, and enables access to all the Raspberry Pi Ports whilst keeping both boards safe and sound!

We now include two lids - one for the PoE HAT, and another for the original PoE HAT.

New for v2.0

  • Now fits both the Raspberry Pi 3/3B and the Raspberry Pi 4 (via the included alternative side panels)
  • Rounded port holes
  • New signature hex-pattern air vents
  • Glass-look top
  • ...and a few other tweaks and changes. It's our best PoE HAT case yet!

Features

  • Compatible with Raspberry Pi 4 and 3 (alternate side panels included)
  • Laser Cut Acrylic
  • Easy Assembly
  • Built-in 'hex' air vents
  • Enables access to all Raspberry Pi Ports
  • Manufactured in the UK

Assembly

Assembly Guide

R174.90  Inc VAT
SecurePi Case for Pi4 (Pi4 SecurePi case black)

Please Note: The Raspberry Pi board is not included

Description:

Our all-new case that we designed from the ground up for the Pi 4.  You can learn more about the case and the design process in the blog.  

The SecurePi Case was designed to work with the Pi 4.  With optional SD and USB/Ethernet/HDMI covers as well as its discrete cooling vents, this functional and attractive case will complement any Raspberry Pi 4.

Unique features:

  • Stunning design 
  • Cooling vents on the top of the case that work perfectly with the PoE HAT and the Pimoroni Fan SHIM
  • Optional cover for the power/HDMI ports or the Ethernet/USB ports with a knock-out for Ethernet
  • Optional cover for the microSD card
  • Clip together or screw together design.  We include the screws if you want additional security, but the case holds together just fine without them if you want flexibility
  • Pass-throughs for GPIO, camera, and DSI cables
  • Viewing holes for onboard Raspberry Pi LED's

Package Includes:
1 x SecurePi case
1 x USB/Ethernet cover with a knock-out for Ethernet
1 x uSD card cover
4 x case screws
Need to remove access to your uSD or USB ports? This is the case for you
R184.90  Inc VAT
R199.90
Argon ONE V2 Aluminum Case for Raspberry Pi 4 with Safe Power Button (Argon One V2 case Pi4)
Note: ExplainingComputers has a great video on this case at https://www.youtube.com/watch?v=IJn3fz7Zk4Q


Argon ONE V2 Aluminum Case Pi 4 Applicable

Make a shiny mini-computer by this decent aluminium-alloy case customized for Raspberry Pi 4

Sleek Aluminum-alloy Enclosure

Aluminum-alloy enclosure with modern space grey finish, robust and nice looking

Removable Top and GPIO Recess

Neat GPIO recess along with magnetic removable top, both aesthetic and protective, there are even clear pin labels and color-coded header, make it easier to use

Amazing Temperature Management

The extension pillars makes the aluminum case become a big heatsink to transfer heat from the board, combined with the cooling fan and multi airflow vents, cooling effect can't be better


Tidy cable management

All of the ports are accessed at the back, minimal cable clutter

Safe & handy power button

Dedicated power button, combined with one-line script, to turn the computer on / off while ensuring the stored files are safe, also supports customized function

Easy assembly without messy wiring

Comes with two PCB boards to simply build it up, no messy wiring, no wrong connection, more stable, more safe

Proper bottom design

TF card slot on the bottom, as well as two airflow vents and four rubber feet

Development Resources

Wiki: www.waveshare.com/wiki/PI4-CASE-ARGON-ONE

R529.90  Inc VAT
Argon NEO Raspberry Pi4 Case (Argon Neo Pi4 case)
Description:

  • MINIMALIST DESIGN |The Argon NEO is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B.
  • SLIM ALUMINUM ENCLOSURE | Made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics.
  • PASSIVE COOLING | The case acts as passive cooling for the high demands of the Raspberry Pi 4 Model B.
  • ROBUST YET PORTABLE | Assembling the case with the Raspberry Pi is easy. With the case's small form, it's easy to bring anywhere.
  • SLIDING MAGNETIC TOP | The case has a magnetic top to keep the ports safe when not in use.
  • ACCESS TO ALL PORTS | All the ports of the Raspberry Pi 4 while keeping the Pi safe.

Compatibility:

Raspberry Pi 4 Model B
Length: 9.53 cm
Width: 7.15 cm
Height: 2.75 cm

R279.90  Inc VAT
Raspberry Pi Zero W Case Blue ABS with GPIO Reference (Blue Zero ABS case)
Introduction :

This case is suitable for the Raspberry Pi ZERO range. There is GPIO references on the cover making it a very useful case

Features:

1. GPIO reference on the the top of case - you needn't search for the references online.
2. Hole on the buttom of case -   you can mount the case on the wall
3. Translucent color design - make the case more beautiful and you can see the pi in the case
4. Use for Raspberry Pi ZERO range

Specifications :

1. Material : ABS
2. Weight : 17 g approx
3. Size ( L x W x H) : 72mm x 34mm x 17mm approx

Package Includes :

1 x Raspberry Pi Zero Case
R59.90  Inc VAT
Black ABS Shell Case for Raspberry Pi Zero (Shell black zero case)
Introduction:

The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .

Install Tips:

1.The 2 short screws is used to fix the raspberry pi zero in the case from inside.
2.The 2 long screws is used to fix the raspberry pi zero from outside

Features:

Material : ABS
Color: Available in Black  and Frosted

Package includes:

1 x Raspberry Pi Zero ABS Case
R59.90  Inc VAT
Frosted ABS Shell Case for Raspberry Pi Zero (Shell frosted zero case)
Introduction:

The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .

Install Tips:

1.The 2 short screws is used to fix the raspberry pi zero in the case from inside.
2.The 2 long screws is used to fix the raspberry pi zero from outside

Features:

Material : ABS
Color: Available in Black  and Frosted

Package includes:

1 x Raspberry Pi Zero ABS Case
R59.90  Inc VAT
Case Fan and heatsink for Raspberry Pi 4 Official case (Pi4 case fan heatsink)

Please note: The case is not included


Description:

The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.

The temperature-controlled fan delivers up to 1.4 CFM of airflow over the processor, memory, and power management IC. The bundled 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor.

Specifications:

Input voltage: 5V DC supplied via 40-pin GPIO header on Raspberry Pi 4
Fan speed control: Pulse width modulation control via user-selectable GPIO pin
Maximum airflow: 1.4CFM
Case Material: Clear PC
Fan size: 25mm x 25mm x 7mm
Compliance: For a full list of local and regional product approvals please visit:
www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md

• Fits perfectly into the lid of the official Raspberry Pi 4 Case
• Temperature-controlled fan delivers up to 1.4CFM of air flow over the processor, memory and power-management IC
• 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor

What's in the box?:

1 x  25mm x 25mm x 7mm fan
1 x 18mm × 18mm × 10mm heatsink
1 x housing for fan

Fitting Instructions



1 Insert Raspberry Pi 4 unit into the lower half (base) of the case, taking care to first remove any SD card, and to align the connectors with the apertures in the base.

2 Insert the case fan into the upper half (lid) of the case, with the fan pointing away from the lid. The two tabs on the fan housing should fit neatly into the inside of the tabs on the lids, and the slightly curved edge of the housing should be flush with the underside of the lid.

3 If you are also fitting the heatsink, remove the backing paper from the selfadhesive pad on the base of the heatsink, position it centrally over the processor and gently press it in position.

4 Connect the wires from the fan to the Raspberry Pi 4 40-pin GPIO header as follows:

Lead          Colour    GPIO Pin
5v                RED         4
Ground        BLACK      6
GPIO 14       BLUE        8



5 Assemble the case.

Using your fan

Once you have connected your fan, by default it will be on whenever your Raspberry Pi is running. You can configure it to turn on only when your Raspberry Pi reaches a temperature that you choose.

Using a recent version of Raspberry Pi OS, first update to retrieve any recent changes to the operating system:

  1. Open the Terminal, either from the Start menu (click the Raspberry Pi icon in the top left corner) or by pressing Control Alt T.
  2. Type sudo apt update and then, when the update has finished, type sudo apt full-upgrade.

Then open the Raspberry Pi Configuration tool:

  1. Click on the Raspberry Pi icon in the top left corner and select Preferences then Raspberry Pi Configuration.
  2. Select the Performance tab.
  3. Next to Fan, click Enabled.
  4. If you have connected your fan as shown above, the default of 14 for Fan GPIO does not need to be changed.
  5. Select the Fan Temperature at which you want your fan to turn on. The default is 80°C, which will stop the Raspberry Pi throttling on difficult tasks without having the fan on all the time.
Upgrade your official RPi4 case with this fan and heatsink. Please note: The case is not included
R79.90  Inc VAT
Per Page      1 - 20 of 37