Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
DaVinci Lab Flexible Filament TPU (1.75mm 0.8Kg) Yellow (PLA flexable yellow)

Thermoplastic polyurethane (TPU) belongs to a class of polyurethane plastics having many important properties such as elasticity, transparency, and resistance to grease, oil, and abrasion. It is unique due to its extremely flexible nature. Technically speaking, TPUs are made up of thermoplastic elastomers.

TPU has different advantages such as resistance to abrasion, ability to perform at low temperature, elasticity, and mechanical properties along with rubber-like elasticity.

TPU printing filament is flexible in nature. It can bend easily without any effect on the design, strength and durability. A mild soap can be used for its cleaning.

Flexible TPU filaments can be stored in a cool airtight container. Container may also have a desiccant pack, so that filament remains bone dry. This container can also help in preventing the entry of dirt and dust particles, so that the filament could be used anytime for print. Although some type of TPUs are water-resistant, prolonged contact with water could result in degradation of the product.

For optimal results print flexible TPU filaments on direct extruders; however, it is possible to print on Bowden extruders as well. Flexible TPU filaments have the ability to adhere well to most surfaces such as glass, aluminum, Kapton tape, and blue painters tape. It is important to always print in a well ventilated room regardless of the filament type.

 

The DaVinci Lab flexible (TPU) filament has the following characteristics:

  • Consistent color
  • 0.8Kg net weight
  • Print Temperature: 200 – 230°C
  • Heat Bed temperature: 50 – 80°C
  • Print Speed: 30 – 50mm/s
  • Accurate diameter of 1.75mm +-0.05mm
  • Vacuumed Sealed With Desiccant


Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R479.00  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Orange (ABS Da Vinci Orange)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R219.00  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Purple (ABS Da Vinci Purple)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R289.00  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Yellow (ABS Da Vinci Yellow)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R219.00  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Green (ABS Da Vinci Green)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R219.00  Inc VAT
DaVinci Lab ABS filament (1.75mm 1Kg) Blue (ABS Da Vinci Blue)

DaVinci Lab’s ABS (Acrylonitrile butadiene styrene) is a super strong, hard wearing and low warping superior filament.

  • Davinci Lab ABS
  • Print temp :- 220 - 250 degrees
  • Heated Bed ;- 80 - 90 degrees (optional)
  • Speed range 60 - 85 mm/s
  • Fan :- No
  • Weight :-1kg
  • Printability :- intermediate

Enclosure is recommended

Tips and tricks
The Ultimate troubleshooting Guide
all3p Guides and tips
R219.00  Inc VAT
1M PTFE Nozzle Feed Teflon Tube For 3D Printer 1.75mm Filament (print feed tube 1m)
Features:

1. Resistance to high and low temperature, from -190℃ to  280℃
2. Corrosion resistance
3. Feed tube for 3D printer 1.75mm filament


Specifications:

Length: 1 meter
Diameter: 2mm x 4mm(inner diameter x outer diameter)
Color: Milky white
Temperature: -190℃ to 280℃


Package Includes:

1m 3D Printer Teflon Tube
R29.90  Inc VAT
Upgrade Remote Metal Extruder Kit For Creality 3D Printer - right (extruder upgrade red right)
Features:

  • Upgrade your Creality 3D Printer Extruder with our New "Metal Aluminium Anodised" Upgrade Kit.
  • Our kit includes all the necessary screws & parts needed to directly replace your original creality plastic extruder.
  • All you have to do is unbolt the old original creality plastic extruder & screw in the new "Metal Extruder" and you are ready to start printing.
  • The advantages of a metal extruder is that you have better, stronger pressure pushing the filament into the printer nozzle so it will improve on the printer's performance.
  • Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.

Package Includes:

1 x Extruder Upgrade Kit
R189.90  Inc VAT
Filament Factory PLA++ Gold 1.75mm 1kg (FF gold PLA)

Specially formulated Filament Factory PLA blend to give best flow and best strength. Supplied on plastic reel.

Available in 1.75 mm

Manufactured in South Africa

R250.00  Inc VAT
Filament Factory PLA++ Green 1.75mm 1kg (FF green PLA)

Specially formulated Filament Factory PLA blend to give best flow and best strength. Supplied on plastic reel.

Available in 1.75 mm

Manufactured in South Africa

R250.00  Inc VAT
Filament Factory PLA++ Fluorescent Blue 1.75mm 1kg (FF Fluorescent Blue PLA)

Specially formulated Filament Factory PLA blend to give best flow and best strength. Supplied on plastic reel.

Available in 1.75 mm

Manufactured in South Africa

R290.00  Inc VAT
Filament Factory PLA++ Fluorescent Green 1.75mm 1kg (FF Fluorescent Green PLA)

Specially formulated Filament Factory PLA blend to give best flow and best strength. Supplied on plastic reel.

Available in 1.75 mm

Manufactured in South Africa

R290.00  Inc VAT
Filament Factory PLA++ Fluorescent Yellow 1.75mm 1kg (FF Fluorescent Yellow PLA)

Specially formulated Filament Factory PLA blend to give best flow and best strength. Supplied on plastic reel.

Available in 1.75 mm

Manufactured in South Africa

R290.00  Inc VAT
Filament Factory ABS Fluorescent Yellow 1.75mm 1kg (FF ABS Fluorescent Yellow)
Specially formulated Filament Factory ABS Fluorescent Yellow blend to give best flow and best strength.
Supplied on a plastic reel 200 diameter x 80mm width x 100mm bore All our filament is standard 1.75mm diameter.
Weight is 1kg filament.
We recommend 235degC nozzle temp, 110degC bed, no cooling fan and preferably an enclosure.


R200.00  Inc VAT
Filament Factory PLA++ Fluorescent Pink 1.75mm 1kg (FF Fluorescent Pink PLA)

Specially formulated Filament Factory PLA blend to give best flow and best strength. Supplied on plastic reel.

Available in 1.75 mm

Manufactured in South Africa

R290.00  Inc VAT
Filament Factory PLA++ Yellow 1.75mm 1kg (FF Yellow PLA)

Specially formulated Filament Factory PLA blend to give best flow and best strength. Supplied on plastic reel.

Available in 1.75 mm

Manufactured in South Africa

R250.00  Inc VAT
Filament Factory SuperPLA™ PETG Yellow 1.75mm 1Kg (FF yellow PETG)

SDE – Strong, Durable and Easy to use.

Specially formulated Filament Factory SuperPLA, blended to give best flow and best strength. SuperPLA is as durable as ABS, almost as strong as nylon and as easy to use as PLA.

Supplied on a plastic reel 200 diameter x 80mm width x 100mm bore All our filament is standard 1.75mm diameter. This material is not available in 2.85mm.
Weight is 1kg filament.
We recommend 245degC nozzle temp, 90degC bed, cooling fan on.
This product is highly susceptible to moisture and might require drying before use

Manufactured in South Africa.

R290.00  Inc VAT
Filament Factory SuperPLA™ PETG Arctic White 1.75mm 1Kg (FF arctic white PETG)

SDE – Strong, Durable and Easy to use.

Specially formulated Filament Factory SuperPLA, blended to give best flow and best strength. SuperPLA is as durable as ABS, almost as strong as nylon and as easy to use as PLA.

Supplied on a plastic reel 200 diameter x 80mm width x 100mm bore All our filament is standard 1.75mm diameter. This material is not available in 2.85mm.
Weight is 1kg filament.
We recommend 245degC nozzle temp, 90degC bed, cooling fan on.
This product is highly susceptible to moisture and might require drying before use

Manufactured in South Africa.

R290.00  Inc VAT
Filament Factory ABS Fluorescent Green 1.75mm 1kg (FF ABS Fluorescent Green)
Specially formulated Filament Factory ABS Fluorescent Green blend to give best flow and best strength.
Supplied on a plastic reel 200 diameter x 80mm width x 100mm bore All our filament is standard 1.75mm diameter.
Weight is 1kg filament.
We recommend 235degC nozzle temp, 110degC bed, no cooling fan and preferably an enclosure.


R200.00  Inc VAT
Filament Factory ABS Fluorescent Orange 1.75mm 1kg (FF Fluorescent Orange ABS)
Specially formulated Filament Factory ABS Fluorescent Yellow blend to give best flow and best strength.
Supplied on a plastic reel 200 diameter x 80mm width x 100mm bore All our filament is standard 1.75mm diameter.
Weight is 1kg filament.
We recommend 235degC nozzle temp, 110degC bed, no cooling fan and preferably an enclosure.
R200.00  Inc VAT
Per Page      1 - 20 of 36