Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
R14.90  Inc VAT
L298N Dual H-Bridge Stepper Motor Driver Board (H Bridge big red dual stepper)
Description:

The L298N is a dual H-Bridge motor driver which allows speed and direction control of two DC motors at the same time. The module can drive DC motors that have voltages between 5 and 35V, with a peak current up to 2A.

Specifications:

Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-12V
Logical current: 0mA-36mA
Drive current: 2A (MAX single bridge)
Storage temperature: -20 to 135
Max power: 25W
Weight: 30g
Size: 43 x 43 x 27mm

Note:

This module has a built-in 5v power supply, when the driving voltage is 7v-12v, this supply is suitable as a power supply.
DO NOT connect input voltage to 5v on controller interface.
When ENA is enabled IN1 IN2 control OUT1 OUT2
When ENB is enabled IN3 IN4 control OUT3 OUT4

Note:  Package does not include the board mounting screws.

Package includes:

1 x  L298N Module

Resources:

Robotic control with python



R39.90  Inc VAT
L293D Dual H-Bridge IC - Solenoid, DC & Stepper Motor Driver (L293D IC H-bridge)
Description:

The L293DNE Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
 
Each chip contains two full H-bridges (four half H-bridges) which means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver
 
 
The L293D Dual H-Bridge IC - Stepper & DC Motor Driver Features:
  • Dual H-Bridges - run four solenoids, two DC motors, or one uni-polar or bi-polar stepper motor
  • Output Current: 600mA per channel (1.2A Max)
  • No of Channels: 4
  • Input: 5V Logic
  • Supply Voltage Range: 4.5V to 36V
  • No. of Pins: 16
  • Operating Temperature Range: 0°C to 70°C


What's in the box?:

1 x L293D Dual H-Bridge IC

Downloads

L293DNE Data Sheet

Tutorials

Controlling a Stepper Motor with the L293D

Raspberry Pi: Controlling a DC Motor

Arduino: Stepper Motors

Arduino: DC Motor Reversing

The L293D Dual H-Bridge IC is able to run four solenoids, two DC motors or one bi-polar or uni-polar stepper motor, with up to 600mA per channel!
R14.90  Inc VAT
Maker Drive: Simplifying H-Bridge Motor Driver for Beginner (maker drive h-bridge)
Description:

For full instructions see our blog

Brushed motor is the most widely used motor because it is easy to use. Just supply the two terminals with DC power, the motor will start rotating! If you want to control its speed and direction using a controller, usually you will use an L298N Motor Driver. But if you want an easy and beginner-friendly motor driver, you are on the right page! Maker Drive is designed for simplicity and with the beginner in mind!

Motor Driver for Beginner- Maker Drive

Maker Drive is not an Arduino Shield, but it is compatible with different models of Arduino main board such as:

Not to forget that it accepts 1.8V, 3.3V & 5V logic(for control) and is compatible with controllers such as Raspberry Pi, micro:bit, Raspberry Pi Pico, ESP etc.

Since you have Maker Drive, you will need suitable DC brushed motors besides the controller, right? So which motor is suitable for Maker Drive? Well, as long as the motor is...

  • DC Brush motor (Two Terminals)
  • Operating voltage from 2.5V to 9.5VDC
  • Rated Current ≤ 1.0A
  • Peak Current ≤ 1.5A

Example of suitable DC brush motor for Maker Drive (Not limit to):

These are the suggested power sources for Maker Drive:



Specifications:

  • Dual-channel, Bi-directional control motor driver
  • Support motor voltage from 2.5V to 9.5VDC
  • Maximum current up to 1.0A continuous and 1.5A peak (less than 5 seconds)
  • 5V Output (200mA) to power the controller.
  • Inputs compatible with 1.8V, 3.3V and 5V logic (Arduino, Raspberry Pi, etc).
  • Solid-state components provide faster response time and eliminate the wear and tear of mechanical relay
  • Regenerative Braking
  • Speed control PWM frequency up to 20KHz (Actual output frequency is the same as input frequency)
  • Dimension: 43mm(W) x 35mm (L) x 14mm (H)


What's in the box:

1 x Maker Drive board

Resources:

R69.90  Inc VAT
Per Page      1 - 3 of 3
  • 1