Search
Search Criteria
Products meeting the search criteria
This is a summary of the soil moisture sensor that can be used to detect moisture, when the soil is dry, the module outputs a high level. Use this sensor to build an automatic watering system.
Specifications:
Operating voltage: 3.3V~5V.
Adjustable sensitivity (blue digital potentiometer adjustment)
Dual output mode,analog output more accurate.
A fixed bolt hole for easy installation.
Power indicator (red) and digital switching output indicator (green).
LM393 comparator chip, stable.
PCB Dimension: 3cm x 1.5cm.
Soil Probe Dimension: 6cm x 2cm.
Cable Length: 21cm.
VCC: 3.3V-5V.
GND: GND.
DO: digital output interface (0 and 1).
AO: analog output interface.
Setup with Raspberry Pi
Package Includes:
1 x Soil moisture detector module
1 x Probe
5 x Jumper Cables
This module can detect humidity and temperature of the surrounding environment. Outputs a digital signal. Has a mounting hole for easy installation. Includes 3 DuPont wires to interface to microcontroller.
Specifications:
Humidity measurement range: 20%~90% RH
Humidity measurement error: ±5% RH
Temperature measurement range: 0~60 C
Working voltage: 3.3 to 5V
Size: 28 x 12 x 8mm
What's int the box?
1 x DHT11 Temperature and Relative Humidity Sensor Module
Resources:
How to setup a DHT11 with your Raspberry Pi. The resistor is already on the PCB so you can skip the breadboard part
Description:
AM2302 Humicap digital temperature and humidity module is a digital output signal containing a calibrated temperature and humidity combined sensor. It uses dedicated digital module capture technology and temperature and humidity sensor technology to ensure that products has high reliability and excellent long-term stability. Sensor includes a capacitive humidity sensing element and a high-precision temperature measurement device, and with a high-performance 8-bit microcontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, low cost and other advantages. Ultra-small size, low power consumption, signal transmission distance up to 20 meters. Making it the best choice for all kinds of applications and even the most demanding applications.
Applications:
HVAC (Heating Ventilation Air Conditioning), dehumidifiers, testing and inspection equipment, consumer goods, automotive, automation, data loggers, home appliances, humidity regulator, medical,weather stations, and other related humidity detection control.
Specification:
Dimensions: 40 x 23mm
Weight: 4g
Voltage: 5V
Port: digital two-way single bus
Temperature range: -40 to 80 °C ± 0.5 °C
Humidity: 20 to 90% RH ± 2% RH
Platform: Arduino, SBC
Package includes:
1 x Sensor Module
How to setup a DHT22 with your Raspberry Pi.The resistor is already on the PCB so you can skip the breadboard part.
The BME280 is a humidity sensor especially developed for mobile applications and wearables where size and low power consumption are key design parameters.
BME280, the precision sensor from , is soldered onto PCB.
Not only the pressure and the temperature, this sensor can measure humidity.
It uses both I2C and SPI (supports 3-, 4-wire SPI) interface
Specifications:
Supply Voltage: 1.8 - 5V DC
Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz)
Operational Range:
Temperature: -40 to 85°C
Humidity: 0-100%
Pressure: 300-1100 hPa
Temperature: 0.01°C
Humidity: 0.008%
Pressure: 0.18Pa
Accuracy:
Temperature: -1°C
Humidity: -3%
Pressure: -1Pa
I2C address
SDO LOW : 0x76
SDO HIGH: 0x77
What's in the box?
1 x bme280 sensor
1 x header
The Raspberry Pi Foundation Project
When the soil moisture is lower than preferred setting, the relay will automatically pull in, start the sprinkler, water pump etc. until the moister reaches the desired humidity level and automatically stop.
Product use: Through the potentiometer, adjust to the desired soil moisture level
Specifications:
Electrical parameters: Supply voltage: 12VDC
Input current: more than 100mA Relay Load Max: 10A 250V AC or 10A 30V DC
Module instruction:
1 sensors applied to the detection of soil moisture; Module
2. Blue potentiometer is used to adjust soil moisture level, clockwise adjustment and control the humidity will be bigger, counterclockwise smaller; 3. Due to module delay function, adjust the humidity value, wait about 5-8 seconds, see if the the relay state changed, the green LED lamp will also have corresponding change, until adjusted to meet the requirements.
Package Includes:
1 x Soil moisture control module
1 x Soil sensor
2 x 20cm long DuPont lines
More details available at:https://github.com/LilyGO/higrowopen
A LG 3000mAH 18650 battery could make ESP32 run 17 hours or more.
This capacitive soil moisture sensor differs from most of the resistive sensors on the market, using capacitive sensing principle to detect soil moisture. It avoids the problem that the resistance sensor is easy to corrode and greatly prolongs its working life.
Size: 193.5mm x 29.4mm
Package includes:
1 x Wemos® Higrow ESP32 WiFi bluetooth Battery DHT11 Soil Temperature And Humidity Sensor Module
High Quality Hygrometer, wonderful tools for Indoor, Outdoor, Home, Laboratory, Library..etc.
Specifications:
Color: Black
Measuring humidity: 10%RH-99%RH
Humidity accuracy: 5%
Humidity display resolution: 1% RH
Measuring temperature range: -50 centigrade~ 70 centigrade
Temperature accuracy: 1 centigrade
Temperature display resolution: 0.1centigrade .
Operating voltage: 2 x 1.5V button LR44 batteries (Not included)
Dimension: 4.7x2.8x1.5cm(approx.)
LCD dimension: 3.6x1.7cm(approx.)
Package includes:
1 x Humidity Hygrometer Meter
Note 1: Batteries not included - ( 3V CR2450)
Note 2: SNZB-02 must be used with the Zigbee Bridge.
Description:
SONOFF SNZB-02 is a ZigBee temperature and humidity sensor that can seamlessly work with SONOFF ZigBee Bridge to track and record the temperature and humidity change in your home, which all real-time readings can be checked on eWeLink APP. Better still, you can set a condition in the smart scene that is the fan is turn on/off when the temperature reaches the limit value, or the dehumidifier in your room starts working once the humidity is over higher, helping prevent the growth of mildew and allergens. You can set a smart scene to trigger alerts through events like high/low temperature, high/low humidity conditions and more.
Device sharing function makes your kids, family, and even the neighbors informed about the environmental conditions of your home with their mobile phones.
It is a battery-operated sensor that can be placed in any corner of your house to monitor the room temperature and humidity. Installation without any tool, simply stick the sensor on the surface of the wall or device and see it nicely to work for you!
1. Do not install on a metal surface, it will affect the wireless communication distance.
2. Installation height of less than 2 m is recommended.
3. The device can be operated intelligently via working with the SONOFF ZigBee Bridge to communicate with other devices.
SONOFF SNZB-02 ZigBee Temperature And Humidity Sensor Overview
Features:
Monitor indoor temperature and humidity.
Sync the real-time temperature and humidity recordings to APP.
Can trigger Wi-Fi devices in smart scene.
Add a camera to ensure you know any emergency in your home.
Low-battery notification.
Quick and easy to install.
Specifications:
Battery: 3V(CR2450)
Wireless protocol: Zigbee (IEEE 802.15.4)
Dimensions: 43mm x 43mm x 14mm
What's in the box
1 x SONOFF SNZB-02 ZigBee Temperature And Humidity Sensor
- 1