Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Squid Combo Kit (Squid combo kit )
Description:

The Squid Combo Pack comprises a Raspberry Squid RGB LED, two Squid buttons (non-latching) and a Raspberry leaf to help identify the GPIO pins.

A bright RGB (Red, Green, Blue) LED with built-in resistors and female header leads that can just plug directly onto the GPIO pins of a Raspberry Pi.

What's in the box ?

1 x LED
2 x Buttons
1 x Raspberry Leaf

Resources:

Instructions(PDF)





(* Raspberry Pi NOT included *)







R149.90  Inc VAT
Raspberry Pi Pico Basic Kit - without Pico (RPi Pico Basic Kit no pico)

Raspberry Pi Pico Basic Kit - Without Pico


Description:

This is a Raspberry Pi Pico Basic Kit by Cytron for the very first MCU launched by Raspberry Pi Foundation. The kit includes almost everything you need to kickstart your way in digital making and start learning MicroPython with Raspberry Pi Pico !

Specifications:

This kit comes without Raspberry Pi Pico. 

You can get your Raspberry Pi Pico from here:
Raspberry Pi Pico - without pre-soldered headers
Raspberry Pi Pico with pre-soldered headers 


What's in the box ?

1   x Breadboard 16.5x5.5cm (830 Holes)
1   x Buzzer-PCB Mount
1   x Finger Adjust Preset Potentiometer 10K
2   x LED 5mm Red 
2   x LED 5mm Green
2   x LED 5mm Yellow
2   x LED Super Bright 5mm Blue
2   x PIR Sensor
3   x 6x6x1 Push Button 4Pin
5   x Resistor 0.25W 5% (330R) 
10 x Male to Female Jumper Wire 
20 x Male to Male Jumper Wire 


Resources:
 
Getting Started with Raspberry Pi Pico (pdf), C/C Development with the Pico and other RP2040-based microcontroller boards.
 
 - Raspberry Pi Pico Datasheet (pdf), An RP2040-based microcontroller board

 - Pico Python SDK (pdf), A MicroPython Environment for the RP2040 Microcontroller

 - Pico C/C SDK (pdf), Libraries and Tools for C/C Development on the RP2040 Microcontroller

 - RP2040 Datasheet (pdf), A microcontroller by Raspberry Pi


Check out some of the video tutorials that you can learn using this kit:

Traffic Light Controller with Raspberry Pi Pico

Reaction Game using Raspberry Pi Pico

Burglar alarm using Raspberry Pi Pico

Control LED using PWM on Raspberry Pi Pico














R99.90  Inc VAT
Plusivo Potentiometer Assortment Kit (Potentiometer Kit)

This Plusivo Potentiometer Assortment Kit includes:

  • 1Kohm -100Kohm Multiturn Trimmer
  • 1Kohm -1Mohm Single Linear - High Precision Variable Resistor with Knobs.
  • Aside from the trimmers, resistors, and knobs inside the box, you will find a mini screwdriver as a bonus.

Features:

  • The potentiometer kit contains Multiturn Trimmers, Linear-High Precision Variable Resistor with Knobs.
  • Contains nuts and washers
  • Free Mini Screwdriver
  • 10 Type of Single Linear-High Precision Variable Resistor.
  • 5 types of multiturn trimmer.

What's in the box?

    1 x Single Linear-High Precision Variable Resistor 1 kΩ
    1 x Single Linear-High Precision Variable Resistor 2 kΩ
    1 x Single Linear-High Precision Variable Resistor 5 kΩ
    1 x Single Linear-High Precision Variable Resistor 10 kΩ
    1 x Single Linear-High Precision Variable Resistor 20 kΩ
    1 x Single Linear-High Precision Variable Resistor 50 kΩ
    1 x Single Linear-High Precision Variable Resistor 100 kΩ
    1 x Single Linear-High Precision Variable Resistor 250 kΩ
    1 x Single Linear-High Precision Variable Resistor 500 kΩ
    1 x Single Linear-High Precision Variable Resistor 1 MΩ
    1 x multiturn trimmer 1 kΩ
    1 x multiturn trimmer 5 kΩ
    1 x multiturn trimmer 10 kΩ
    1 x multiturn trimmer 50 kΩ
    1 x multiturn trimmer 100 kΩ
    1 x multiturn trimmer 100 kΩ
    1 x mini screw driver

Resources:
Python Library
Definition, Types, And Working Principle
R123.90  Inc VAT
3D Christmas Tree DIY Kit Red/Green/Yellow LED Flash Circuit Kit (3D DIY Christmas tree)

Description:

Awesome and fun, for adults and kids, this is a seasonal must if you're into your electronics and gadgets. This circuit is composed of 16 pcs LED (light emitting diode). The 16pcs LED divided into four groups, and each group has different flashing frequencies, when four groups flash together, this item looks like a small Christmas tree. The circuit is powered by a 9V battery.

Specifications:

This circuit is simple and practical, low power consumption. It uses integrated circuits for driving: fewer parts, and the line is simple and easy to understand.

External Wiring Kit:

With USB plug for easy replacement of parts at any time and conducive circuit debugging. Also allows us to deepen our understanding of the principles of the circuit in the debugging process.

 This project is in the form of an oscillation circuit by the cycle generated by the following principles:

  • After the first charge, the capacitor C1 & C4 charging is complete.
  • Capacitors C2 & C3 will continue to charge.
  • When the transistor Q1 & Q4 is turned on at the same time, it discharges the capacitor C1 & C4.
  • Capacitors C2 & C3 is fully charged, the transistor Q1 & Q4 will be closed, while also charging the capacitor C1 & C4 again.
  • Transistors Q2 & Q3 is turned on while the capacitor C2 & C3 will be discharged.
  • By analogy, the flash of speed is the oscillation frequency, and the frequency is determined by the resistor R & capacitance C values.
Board Size:70mm x 110mm



What's in the box ?

A cool addition to the new era of Christmas
R159.90  Inc VAT
Kitronik :MOVE Motor for the BBC micro:bit(V1 & V2) (Kitronik:MOVE Motor)
Description:

Develop your coding skills with the Kitronik :MOVE Motor for micro:bit, a fun introduction to buggies and robotics.

The Kitronik :MOVE Motor for the BBC micro:bit provides a fun introduction to buggy robotics. More than just a programmable buggy, learning to use all of the included features will give the budding roboteer a solid grounding in robotics as a whole.

Learn about movement, how to utilise light and sound, obstacle detection and avoidance, and how to code :MOVE Motor to follow a line. When used in conjunction with the micro:bit's radio features, the possibilities are endless.

Attached to the chassis are two bi-directional DC motors with variable speed control. The wheels have rubber tyres and are a simple push-fit onto the motor shafts. Slot a BBC micro:bit into the edge connector and you are ready to code. There is no other assembly required and no tools required.

There are built-in battery holders for 4x AA batteries. This provides a regulated voltage supply to power the BBC micro:bit which is fed into the edge connector. There is also a power switch to conserve batteries when the buggy is not in use.

The micro:bit slots into the onboard edge connector. Code the micro:bit, plug it into the buggy, switch the power on, and then play.


CODE IT !

:MOVE Motor can be coded using the Microsoft MakeCode editor. Kitronik has produced a set of custom MakeCode blocks to simplify coding the completed buggy. The booklet that comes with the buggy contains more detailed instructions on using the blocks and writing code. If you are feeling more adventurous or relish a challenge, :MOVE Motor can also be coded with Python.

Also within the booklet (that comes inside the box), are some quick tutorials to get you started. There are also additional online tutorials and step by step guides for extra projects.

Note:

  • This kit does not include a micro:bit, a micro:bit can be obtained from here.
  • No soldering is required!
  • Minimal assembly required.



Specifications :


Length110mm.
Width90mm.
VoltageNominal 4.8 - 6V (4xAA batteries).
MotorsPins 19 and 20 (via I2C).
Audio BuzzerPin 0 (Standard Music Pin).
Visual (4x ZIP LEDs)Pin 8.
Line Follow (IR)Pins 1 (Right) and 2 (Left).
UltrasonicPins 13 (Trigger) and 14 (Echo).
Servo Connections2 on Pins 15 & 16.


Features :
  • The Kitronik :MOVE Motor for the BBC micro:bit provides a fun introduction to buggy robotics and coding.
  • It is backed up by a range of fun tutorials to introduce you to all of the great features.
  • All of the tutorials and resources are free.
  • There is no soldering required and assembly is quick and super simple.
  • The buggy features two bi-direction DC motors.
  • There are ultrasonic distance and line following sensors onboard.
  • It also features a Piezo sounder and pen mount.
  • There are 4 full-colour programable ZIP LEDs.
  • Two pin outputs that are ideal for servo connections (can be used for other inputs and outputs).
  • The battery holder is built onto the chassis.
  • The buggy is also fitted with a power switch to conserve the batteries.
  • There is also an onboard edge connector for the micro:bit, code, plug and play.
  • Kitronik has produced custom MakeCode blocks to simplify coding with the MakeCode editor.







R599.90  Inc VAT
Kitronik Robotics Board for Raspberry Pi Pico (KT Robotics Board Pico)
Description:

Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico.

The Robotics Board features 2 Dual H Bridge Motor Driver ICs. These are capable of driving 2 standard motors or 1 stepper motor each, with full forward, reverse, and stop control. There are also 8 servo outputs, capable of driving standard and continuous rotation servos. They can all be controlled by the Pico using the I2C protocol, via a 16 channel driver IC. The IO break out provides connections to all the unused pins on the Pico. The 27 available I/O pins allow other devices, such as sensors or ZIP LEDs, to be added to the board.

Power is provided via either a terminal block or servo style connector. The supply is then controlled by an on/off power switch to the board and there is also a green LED to indicate when the board has power. The board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected Pico. This removes the need to power the Pico separately. The 3V and GND pins are also broken out on the header, which means external devices can also be powered.

To use the robotics board, the Pico should be firmly inserted into the dual row pin socket on the board. Ensure the Pico is inserted with the USB connector at the same end as the power connectors on the robotics board. This will allow access to all of the board functions and each pin broken out.


Features :

  • A compact yet feature-packed board designed to sit at the heart of your Raspberry Pi Pico robotics projects.
  • The board can drive 4 motors (or 2 stepper motors), with full forward, reverse, and stop control, and 8 servos.
  • It also features 27 other I/O expansion points and Power and Ground connections.
  • The I2C communication lines are also broken out allowing other I2C compatible devices to be controlled.
  • Additionally, the board features an on/off switch and power status LED.
  • Power the board via either a terminal block or servo style connector.
  • The 3V and GND pins are broken out to solder pads, allowing external devices to be powered.
  • Code it with MicroPython via an editor such as the Thonny editor.

Specifications :

Supply VoltageNumber of Servo ChannelsNumber of Motor ChannelsServo / Motor VoltageMax Continuous Current (all Servos an Motors)Max Motor currentAdditional IOAdditional GNDAddional 3V3
3 - 10.8V
8
4 DC / 2 Stepper
Same as Supply Voltage
12 Amps
1.5A / Motor
26 (via solder pads)
8 (via solder pads)
7 (via solder pads)


What's in the box ?


1 x Kitronik Robotics Board (for Raspberry Pi Pico)









 (* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)


(* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)




(* Raspberry Pi And add ons are NOT included - ONLY the Robotics Board *)

R289.90  Inc VAT
Breadboard Jumper Wire Kit (140pcs) (loose Jumper Wire Kit)
Description:

This is the jumper wires that I have been dreaming of :) This is a box full of color-coded assortment of small jumper wires, great for prototyping. And it is pre-cut, stripped and bent at both ends with the standard breadboard spacing, perfect for classroom and when you do experiment with breadboard.

The best is it comes in a proper plastic box. There are 140 wires in total with different lengths. So get ready for it.

Note: Breadboard not included - Click HERE to get yours !

Features:

  • Wide application: designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects.
  • Easy to use: all the colored jumper wires are pre-stripped and preformed right-angled, easy to insert into breadboard.
  • Complete specification: this kit includes 14 different lengths of jumper wires which can satisfy all your need.
  • Storage box: come with a free plastic box, keep your jumper wire kit organized, convenient for store and fetch.
  • These leads are flexible, durable and easy to connect and disconnect, ideal for prototyping use.

Specifications:

  • Material: Plastic Metal.
  • Quantity: 140 pcs.
  • Color: Rainbow color with red, yellow, green, white, blue, orange and grey.
  • Wire Length: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, 125mm (10pcs each length).

What's in the box ?

  • 140 x Jumper Wires
  • 1 x Storage Box



Note: Breadboard not included - Click HERE to get yours !



R59.90  Inc VAT
Pro's kit IC Extractor tool (chip extractor tool green)
Description:

Appropriate for extracting PLCC, PGA, PCLL and IC packed by DIP from SOCKET or PCB
By gripping your hand you can extract the IC vertically and perfectly
Great for extracting dense IC
Metal and shielded plastic to avoid static charge damage to IC components
Small hook for easy extracting IC and installation
Perfect for repair man, such as TV / DVD / PC technicians or IC workers


What's in the box?

1 x IC chip extractor
R47.90  Inc VAT
120Pcs/lot 15Value 50V 1uF-2200uF Electrolytic Capacitor Kit (120 capacitor kit)
Description:

This useful kit can be used for your electronic projects or repairs.

Structure: Fixed capacitors
Type: Aluminum Electrolytic Capacitors
Resistance: 1UF~ 2200UF ohm
Voltage: 50V
Colour: Black
Quantity: 120PCS


What's in the box?

Capacitance   Voltage  Size(mm)   Quantity 

1UF                    50V         5*11         10PCS

2.2UF                 50V         5*11         10PCS

3.3UF                 50V         5*11         10PCS

4.7UF                 50V         5*11         10PCS

6.8UF                 50V         5*11         10PCS

10UF                  50V         5*12         10PCS

22UF                  50V         5*11         10PCS

33UF                  50V         5*12         10PCS

47UF                  50V         6*12         10PCS

100UF               50V         7*13          5PCS

220UF               50V        10*13         5PCS

330UF               50V        10*17         5PCS

470UF               50V        10*20         5PCS

1000UF            50V         13*25         5PCS

2200UF            50V         16*30         5PCS


Resources:
Theory
Introduction
Types

This useful kit can be used for your electronic projects or repairs.
R178.78  Inc VAT
R239.90
Solar Project Kit - Fan Edition (Solar Project Kit FAN)
Description:

Once again, Cytron Technologies presents the in-house selected and packed do-it-yourself (DIY) Solar Project Kit. The kits are specially designed for Malaysia Primary School students and teachers who have to undergo a new subject known as Reka Bentuk & Teknologi (RBT). RBT is also a compulsory tech subject introduced to Secondary schools to enhance learning through practicality and hands-on. 

A couple of things you should know about the Solar Project Kit:

  • NO Hot Soldering Gun nor Hot Glue Gun is needed to complete the project!
  • NO Screwdriver to connect components or wires! Press-fit terminals are included.
  • Everything you need in one box - The box is part of the project too!
  • Comes with an instruction manual - Sync to Standard 5 school textbook!
  • Designed to fuel creativity! - When combined with basic materials.

Cytron Simplify the digital making :)



Solar Project Kit - Fan Edition

Take a closer look at what's in the box and how easy it is to get started with the Solar Project Kit - Fan Edition:

The fan will cool you under the hot sun. The energy to drive the fan is renewable, no carbon emission and is green! We should embrace and appreciate renewable energy. Together, let's make a better world and conserve the environment for our future generation.


What's in the Box ?

  • Solar Project Kit - Fan:
    • 1 x Solar Cell/Panel 3V 160mA (0.48W) Wire Soldered
    • 1 x 300C 1.5-6VDC 7mm Shaft Motor with Wires
    • 2 x CH-2 Quick Wiring Terminal Press Type
    • 1 x DIY 4 Blades 56mm Motor Propeller (Blue)
    • 1 x Rocker Switch with Wire-20CM
    • 1 x Double Sided Tape 12 x 24 x 1mm (5 pcs)
    • 1 x Instruction Manual for RBT 5 Solar - Fan
    • 2 x 5mm Red LED *added for kit shipped after 19th March 2021*



Resources:




R129.90  Inc VAT
Solar Project Kit - Light Edition (Solar Project Kit LED)
Description:

Here is another edition of the solar project kit, the Light Edition Solar Project Kit. Here's a video showing how you can set up a Moser Bottle Lamp easily

Once again, Cytron Technologies presents the in-house selected and packed do-it-yourself (DIY) Solar Project Kit. The kits are specially designed for Malaysia Primary School students and teachers who have to undergo a new subject known as Reka Bentuk & Teknologi (RBT). RBT is also a compulsory tech subject introduced to Secondary schools to enhance learning through practicality and hands-on. 

A couple of things you should know about the Solar Project Kit:

  • NO Hot Soldering Gun nor Hot Glue Gun is needed to complete the project!
  • NO Screwdriver to connect components or wires! Press-fit terminals are included.
  • Everything you need in one box - The box is part of the project too!
  • Comes with an instruction manual - Sync to Standard 5 school textbook!
  • Designed to fuel creativity! - When combined with basic materials.



What's in the box ?

  • Solar Project Kit - Light:
    • 1 x Solar Cell/Panel 3V 160mA (0.48W) Wire Soldered
    • 2 x CH-2 Quick Wiring Terminal Press Type
    • 1 x Rocker Switch with Wire-20CM
    • 1 x Double Sided Tape 12 x 24 x 1mm (5 pcs)
    • 2 x LED Super Bright 5mm Red
    • 1 x Diodes 1N4007
    • 1 x AAAx2 Battery Holder
    • 1 x PKCELL NiMH Rechargeable AAA 1200mAh Battery (2 Pcs)
    • 1 x Instruction Manual for RBT 5 Solar - Light
Resources:

R178.90  Inc VAT
micro:bit Smart Watch Kit (without micro:bit) (Micro:bit Watch DIY)
Description:

This Smart Coding Kit is a wearable device based on micro:bit button cell extension board Pro, a DIY micro:bit watch can be easily made with a simple installing method.


Features:

  • A DIY (Do It Yourself) Watch kit
  • Designed for micro:bit
  • Works with both the micro:bit V1 and micro:bit V2
  • Comes with sample code (in the guide)
  • Power with Coin Cell battery (CR2025 or CR2016)
  • Comes with Strap
  • Easy to assembly

What's in the box ?

  • 1 x CR2025 Battery Holders
  • 1 x Nylon watch strap
  • 1 x micro USB wire
  • 1 x MINI Screwdriver

Note: You will need 2 x CR2025 battery and a micro:bit to complete the watch.

Resources:







R249.90  Inc VAT
Grove All In One Beginner Kit for Arduino (Grove Kit for Arduino)

Description:


Note:
 
This kit comes with the Seeeduino -Lotus, Arduino UNO compatible board.

Note: The All In One Beginner Kit is now compatible with Scratch 3.0 graphical programming and there are 16 FREE lessons :) Check it out.




Here is a Video on getting Started :

YouTube : Easy way to start with Arduino



Learning new things is always difficult, and it's the same for Arduino beginners.  You need to learn hardware knowledge, programming code, need to know connection methods of various complex interfaces, and even need to master welding skills. Tons of things are needed before you actually start learning Arduino programming. Well, we feel your pain, so we carry the Grove Beginner Kit for Arduino® from SeeedStudio, it is one of the simplest ways to get started with Arduino.



Unlike most kits, the Grove Beginner Kit for Arduino is an all-in-one kit, no breadboard, no soldering, even no wiring is needed. The kit cuts all those muss and fuss, aiming to give you the best experience, you only need to focus on coding and Arduino Learning. The kit is powered by one Arduino compatible Board (Seeeduino Lotus) together with 10 additional Grove Arduino sensors all in one piece of the board. 



All the modules have been connected to the Seeeduino(Microcontroller) through the PCB stamp holes so no Grove cables are needed to connect. This is perfect for educational fields where frustrating wiring and soldering is no longer needed.



Of course, you can also take the modules out and use Grove cables to connect the modules. You can build any Arduino project you like with this Grove Beginner Kit For Arduino®.





What is Grove?

Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. We have developed more than 300 Grove modules, covering a wide range of applications that can fulfill a variety of needs. Not only are these open hardware, but also have open-source software.

Note: SeeedStudio also prepared example code and software libraries to help you running 12 different demos in just a few lines of code. Check this Wiki to get started now!

Features:

  • Arduino UNO compatible board(ATmega320p based Seeeduino Lotus)  10 most commonly used Arduino modules
  • All modules are pre-wired, no breadboard and jumper cables required
  • 74 pages PDF wiki 12 step by step project tutorials
  • Super friendly to beginner and STEAM education
  • Compatible with over 300 Grove modules

Hardware Overview :


What's in the box?

  • Included in Kit:
    • Grove Beginner Kit For Arduino Board x 1
    • Micro USB Cable x 1
    • Grove Cables x 6
  • Included on the board:
    • Grove - LED x 1
    • Grove - Buzzer x 1
    • Grove - OLED Display 0.96" x 1
    • Grove - Button x 1
    • Grove - Rotary Potentiometer x 1
    • Grove - Light x 1
    • Grove - Sound x 1
    • Grove - Temperature & Humidity Sensor x 1
    • Grove - Air Pressure Sensor x 1
    • Grove - 3-Axis Accelerator x 1
    • Seeeduino Lotus x 1

Resources:


R629.90  Inc VAT
DIY Wooden Sun Earth Moon Orbit STEM Kit (Orbit STEM Kit)
Description:

The Solar System is the gravitationally bound system of the Sun and the objects that orbit it. In this kit, you will be able to demonstrate and visualize how the earth orbits the sun and how the moon orbits the earth. While you're at it, let your children build it themselves while learning how to hook up some gears and DC motors.






Note: Download the softcopy instruction manual (English) here




The kit is also paintable which makes it exciting! Let your children paint the planets after assembling the wooden structure.

Features:

  • Do It Yourself Wooden Sun Earth-Moon Orbit
  • Suitable for age 6 years old and above
  • Come with everything needed to assemble the solar system project
  • Learn about our solar system with Sun, Earth and Moon.

What's in the box?

  • Wooden parts for the rotating gear structure
  • Some double-sided tape
  • 1 x orange stopper
  • 3 x Wires
  • 1 x AA battery holder
  • 1 x Wooden filer (For sanding)
  • 1 x DC motor
  • 1 x Metal rod
  • 3 x Different size circular foam

Resources:

R99.90  Inc VAT
DIY Wooden Safe Box with Passkey STEM Kit (DIY safe kit)
Description:

This wooden safe box is precisely cut with a laser cutting machine, created as the perfect gift for your friends and family. It is also a perfect DIY kit to create and store your personal belongings. Not that the security of this device is at its minimum with bolts locked on each side of the wooden frame.

Note: Refer to the instruction manual below to learn how to change the passcode. Default passcode is "000".

Get this kit to let your kids have a more hands-on experience is creating their own personal safebox while learning how to use a screwdriver.

Features:

  • Do It Yourself Wooden Safe Box with Passkey
  • Suitable for age 6 years old and above
  • Come with everything needed to assemble the music box
  • No power or battery needed
  • Learn the mechanism of a wind-up music box
  • Music: Carrying You (From "Castle in the Sky" by Studio Ghibli)

What's in the box?

  • Wooden parts for the safe box
  • Some screws
  • 2 x Plastic frame holder
  • 1 x Screwdriver
  • 1 x Passkey lock
  • 1 x Passkey dial
  • 1 x Hinge

Resources:

R99.90  Inc VAT
DIY Wooden Ferris Wheel STEM Kit (DIY Ferris wheel)
Description:

A Ferris wheel is an amusement ride consisting of a rotating upright wheel with multiple passenger-carrying pods attached to the rim in such a way that as the wheel turns, they are kept upright, usually by gravity. And yes, it is fun too even in a miniature form! This kit lets you build your own miniature Ferris wheel while learning its basic structure and the concept of keeping the pods upright through gravity!

Features:

  • Do It Yourself Wooden Ferris Wheel
  • Suitable for age 6 years old and above
  • Come with everything needed to assemble the Ferris wheel project
  • Learn the basic concept and the structure of a Ferris wheel
  • Perfect kit to modify and reprogram using a microcontroller while adding LEDs and music (Not included in this kit)

What's in the box?

  • Wooden parts for the Ferris wheel structure
  • Some double-sided tape
  • Some wires
  • 1 x AA battery holder
  • 1 x Wooden filer (For sanding)
  • 1 x DC motor
  • 1 x Switch
  • 1 x Wood glue

Resources:

R144.90  Inc VAT
DIY Wooden Battery Powered House STEM Kit (DIY house kit)
Description:

What better way to learn electronics than to build your very own mini wooden dollhouse with blinking LEDs! This DIY kit is simple enough to be built by 4 years old children, with parent's help. And children 6 years old and above can build it by themself! Let them explore simple electronics by lighting up an LED while connecting it to a switch. You can also let your kids understand how the battery and LED polarity works! Furthermore, the house is a perfect platform for children to innovate and create better projects by adding more features into it.

Features:

  • Do It Yourself Wooden Battery Powered House for kids
  • LED is powered up with 2 AA batteries
  • Suitable for age 4 years old and above
  • Come with everything needed to assemble as a working mini turbine
  • No soldering is needed

What's in the box?

  • 1 x AA Battery Holder
  • 1 x Wooden House Structure
  • 1 x Small DC Motor with plastic enclosure
  • 1 x Wire connector
  • 1 x Small screwdriver
  • 1 x Blinking LED
  • 1 x Bracket for Door
  • 1 x Switch
  • Some screws and nuts for mounting
  • Some double-sided tape

Resources:

R76.90  Inc VAT
Odseven Ultimate Resistor Kit (OD7 resistor kit)
Description:

The ultimate resistor kit, containing 575 resistors (1/4W metal film) of various values in a hardy component box with a secure clasp! Each resistor value is packed separately with it's value clearly labelled on the outer pouch.
Don't worry if you get them mixed up - there's a handy resistor value calculator on the inside of the box!

Included Values: 
  • 25x 0 Ohm ±1%
  • 25x 10 Ohm ±1%
  • 25x 20 Ohm ±1%
  • 25x 47 Ohm ±1%
  • 25x 470 Ohm ±1%
  • 25x 2.2k Ohm ±1%
  • 25x 4.7k Ohm ±1%
  • 25x 22k Ohm ±1%
  • 25x 47k Ohm ±1%
  • 25x 100k Ohm ±1%
  • 25x 220k Ohm ±1%
  • 25x 470k Ohm ±1%
  • 25x 1M Ohm ±1%
  • 50x 100 Ohm ±1%
  • 50x 220 Ohm ±1%
  • 50x 330 Ohm ±1%
  • 50x 1k Ohm ±1%
  • 50x 10k Ohm ±1%

What's in the box?

1 x resistor kit
R178.90  Inc VAT
Basic Soldering Wire and Rosin Paste Kit (basic solder wire rosin paste)
Description:

This is a Basic Soldering Wire and Rosin Paste Kit. It contains a set of soldering accessories including solder paste, solder wire and other bonus items for hobbyists, electronics and electrical learners, enthusiasts, beginners, and professionals. It is suited for purposes such as DIY soldering projects, electronics repairs, home crafts-making, and many more.

Specifications:

  • Solder wire and rosin paste kit
    • It includes the most commonly used diameter for lead solder and high quality soldering paste as accessories for electrical soldering.
  • 0.6mm diameter solder alloy and high-quality rosin flux that is essential in electrical soldering.
  • Bonus items included
    • Black and red wires and mini screwdriver and other bonus included inside.
  • Durable box included
    • It helps in keeping the contents organized, secured and for easy transport of the kit anywhere.


What's in the box:

  • 1 x 50 g of 0.6mm diameter 60-40 Sn/Pb solder wire
  • 1 x rosin paste
  • Bonus items:
    • 1 x black AWG 22 tinned copper silicone wire
    • 1 x red AWG 22 tinned copper silicone wire
    • 2 x mini screwdriver


R199.90  Inc VAT
16 in 1 Building:bit Programmable Building Block Kits (building:bit building block kit)

16 in 1 Building:bit Programmable Building Block Kits


Description:

The Building:bit comes with the Super:bit Expansion board and it works with both micro:bit V1 and micro:bit V2(micro:bit not included)


16-in-1 superkit programmable building block kit is designed based on BBC micro:bit, which is composed of Super:bit expansion board, building block servo, Building block motor, battery, and 358 building block parts.

We combine building blocks with electronic devices to bring your building blocks to life, and they can also play music and realize colorful lights. On the one hand, it allows children to learn to program. On the other hand, it can also cultivate children's practical ability and stimulate creativity by assembling building blocks.

Features:

  • Compatible with both micro:bit V1.X and V2.
  • The building:bit kit is designed based on BBC micro:bit, equipped with Super:bit professional expansion board.
    • The most popular microcontrollers for children are suitable for STEAM education.
    • Super:bit expansion board specially designed for micro:bit can perfectly integrate with building blocks, build any shape, and drive building block servo, motor, RGB lights and other devices.
  • 16 kinds of building block models full-color printing project instruction manual
    • The building block parts of this kit are dominated by blue and white, the whole is full of science and technology, which can be assembled into N models.
    • The manual includes assembly steps of 16 kinds of models and basic instruction content for programming.
  • MakeCode programming Python programming, suitable for users of different ages.
    • MakeCode programming: It can effectively reduce the learning threshold and improve children's interest in learning by dragging and splicing colorful building blocks
    • Python programming: A string of character commands control the building blocks, writing a wonderful chapter belonging to the Makers and building block enthusiasts.
  • Support App/game handle remote control
    • When using different equipment to interact with the building blocks, the user can experience the fun brought by technology.
  • Compatible with Lego building block, various gameplays
    • 16 kinds of models with up to 80 gameplays, such as spider walking, helicopter propeller rotation, car wriggling, cannonball shooting, etc.
    • Users can also expand through more Lego bricks and build more interesting shapes.
  • Programming language: MakeCode graphical programming / Python programming







Specifications:


  • Remote control method: APP/micro:bit gamepad
  • Main material: ABS
  • Package Weight: about 1400g
  • Packing box size: 288 * 213 * 68mm
  • Battery type: Rechargeable lithium battery
  • Lifetime: 120 minutes
  • Battery energy: 3.7V / 1200mAh
  • Working temperature: 4 ~ 40 ℃
  • Onboard function: RGB lights, buzzer, etc.
  • Number of building blocks: 358 high-precision building blocks
  • Motor / Servo: 2 motors, 1 servo


What's in the box:

    • 1 x 16 in 1 Building:bit kit

Resources:


R2,499.90  Inc VAT
Per Page      101 - 120 of 172