Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R262.23  Inc VAT
R329.90
RP2040-LCD-0.96 Pico-like MCU Board Based on Raspberry Pi MCU RP2040 with LCD and pre-soldered headers (WS RP2040-LCD WH)
Description:

RP2040 MCU Board with LCD, a Pico-like MCU board based on Raspberry Pi RP2040 with pre-soldered headers. Compatible with most of the Raspberry Pi Pico add-on modules.


Board specifications

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly.

In additional, there'rs also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip.

Key features include:

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core Arm Cortex M0 processor, flexible clock running up to 133 MHz
  • 264KB of SRAM, and 2MB of on-board Flash memory
  • USB-C connector, keeps it up to date, easier to use
  • 0.96inch 160×80 pixels 65K colorful IPS LCD display
  • Lithium battery recharge/discharge header, suitable for mobile devices
  • Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
  • Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components)
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • 26 × multi-function GPIO pins
  • 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 8 × Programmable I/O (PIO) state machines for custom peripheral support
C/C ,MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started


Pico-like lcd code found at : 
sudo apt-get install p7zip-full
cd ~
sudo wget  https://www.waveshare.com/w/upload/7/74/Pico_LCD_code.7z
7z x Pico_LCD_code.7z -o./Pico_LCD_code
cd ~/Pico_LCD_code
cd c/build/



26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration 



What's On Board



  1. USB Type-C connector
  2. BOOT button press it when resetting to enter download mode
  3. RESET button
  4. 0.96inch IPS LCD display 160 × 80 pixels, 65K colorful
  5. Battery header MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
  6. TPS63000 high efficiency DC-DC buck-boost chip
  1. ETA6096 high efficiency Lithium battery recharge manager
  2. RP2040 dual-core processor, up to 133MHz operating frequency
  3. W25Q16JVUXIQ 2MB NOR-Flash
  4. DEBUG points
  5. Pinout
outline dimensions



Wiki: RP2040-LCD-0.96

What's in the box?

1 x RP2040-LCD with pre-soldered headers
R279.90  Inc VAT
IIC / I2C 1602 Blue Backlight LCD Display Module For Arduino (Blue backlight display)
Description:

Comes with an I2C breakout board at the back. This allows you to use only 2 of your controller pins to be able to communicate with your screen, leaving the rest for other things.

Specifications:

Power supply voltage: 2.5 - 6V
Supports I2C
Blue back light, contrast can be adjusted
Two line output
Four wire connection

Package included:

1 x LCD Display Module

Resources:

Setup Guide
R75.90  Inc VAT
WS 10.1inch Resistive Touch Screen LCD HDMI interface (10.1 Resistive touch display)
Features
  • 1024×600 high resolution
  • Resistive touch control
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Backlight can be turned off to lower power consumption

Interface:

PIN NO.SYMBOLDESCRIPTION
1, 173.3VPower positive (3.3V power input)
2, 45VPower positive (5V power input)
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24NCNC
6, 9, 14, 20, 25GNDGround
19TP_SISPI data input of Touch Panel
21TP_SOSPI data output of Touch Panel
22TP_IRQTouch Panel interrupt, low level while the Touch Panel detects touching
23TP_SCKSPI clock of Touch Panel
26TP_CSTouch Panel chip selection, low active

External Dimensions




Development Resources

Wiki : www.waveshare.com/wiki/10.1inch_HDMI_LCD

R1,799.90  Inc VAT
WS 13.3inch Capacitive Touch HDMI LCD (H) (with case) 1920x1080 IPS (13.3 capacitve display)
Description:

13.3inch IPS screen, 1920x1080 high resolution. Toughened class cover. Supports Raspberry Pi and can also be used as a computer monitor.



Features

  • 13.3inch IPS screen,1920x1080 high resolution
  • Toughened glass capacitive touch panel, 6H hardness
  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
    • When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free
    • When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
  • Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • 3.5mm audio jack, supports HDMI audio output
  • Embedded ferrite Hi-Fi speaker
  • Also supports VGA input (specific cable is required and should be purchased separately)
  • 75x75mm spacing mounting holes (M4 screw hole) for general wall mount
  • Comes with 75° tilt angle stand

External Dimension


Development Resources

Wiki : www.waveshare.com/wiki/13.3inch_HDMI_LCD_(H)_(with_case)

R3,499.90  Inc VAT
WS 7inch HDMI LCD capacitive touch (C) display, 1024x600, IPS, supports various systems (1024x600 7inch HDMI LCD (C))
7inch HDMI LCD (C) Features
  • 7inch IPS screen, 1024x600 hardware resolution
  • Capacitive touch control
  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
    • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
    • When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
  • Backlight can be turned off to lower power consumption

Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable



Wiki : www.waveshare.com/wiki/7inch_HDMI_LCD_(C)

FAQ
Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

For more info, please check the wiki page.

R1,169.90  Inc VAT
IIC/I2C/TWI/SPI Serial Port Module 5V 1602LCD For Display (serial adapter board)
Description:

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)
The backlight and contrast is adjusted by potentiometer
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable


Specifications:

Compatible for 1602 LCD Supply voltage: 5V

Package includes:

1 x serial interface module
R34.90  Inc VAT
Yellow blue double colour 128X64 OLED LCD Display Module For Arduino 0.96" I2C IIC SPI Serial (OLED display)
Description

OLED displays driven by SSD1306 driver IC. SSD1306 is a CMOS OLED driver with controller for OLED dot-matrix graphic display system.
This is a popular OLED display with Portable and wearable devices becoming the new trends. 

Specifications:

Driver: SSD1306
Interface type: IIC interface
Pin definition: GND, VCC, SCL, SDA
        1:GND(OLED power supply)
         2:VCC (OLED 3.3~5V)
         3:SCL(OLED IIC Clock line)
         4:SDA(OLED IIC Cable)


What's in the box?:

1 x OLED display

Resources:

We used these instructions to get it working on Pi: https://circuitdigest.com/microcontroller-projects/ssd1306-oled-display-with-raspberry-pi
R64.90  Inc VAT
LCD module 3.5 inch TFT LCD display for Arduino UNO R3 Board and supports mega 2560 R3 (Arduino LCD display 3.5inch)
PLEASE NOTE: Arduino board and USB cable are not included

LCD module 3.5 inch TFT LCD screen 3.5 " for Arduino UNO R3 Board and support mega 2560 R3



Watch a video on this item at https://www.youtube.com/watch?v=PAPW97X6IRM
 


Package Includes:
 
 1 x 3.5 inch TFT LCD


Resources:

We have found the best Libary to use to run this display is: MCUFRIEND_kbv Library for Uno 2.4, 2.8, 3.5, 3.6, 3.95 inch mcufriend Shields
You can find out more: https://github.com/prenticedavid/MCUFRIEND_kbv
Open Arduino IDE
Click on Sketch -> Include library -> Manage Libraries -> and search for MCUFRIEND
Once installed, you can test your display using the provided examples
LCD Not Touchscreen
R369.90  Inc VAT
LCD Keypad Shield LCD1602 LCD 1602 Module Display For Arduino ATMEGA328 ATMEGA2560 raspberry pi UNO blue screen (buttons blue backlight)
Description
  •     This is a basic 16 character by 2 line display.   
  •     Utilizes the extremely common HD44780 parallel interface chipset.   
  •     Interface code is freely available.   
  •     Blue Backlight with white words.   
  •     uses 4 Bit Arduin LCD Library.   
  •     Size:8cm x 5.9cm - 3.15inch x 2.32inch   


Package Content:

1 X Keypad Shield 1602 LCD

DFRobot WIKI
R87.90  Inc VAT
Display-O-Tron HAT (Display-O-Tron HAT)
Description:

Raspberry Pi and case not included

Great for including a colourful character display and button inputs on your Raspberry Pi based projects!

Includes a 16x3 character LCD display, 6-zone RGB LED backlight, bar graph, and six capacitive touch buttons all in one slim package.

It's ideal for controlling your internet radio or home automation projects.

Features

  • 16x3 character LCD display (full ASCII character set and eight custom glyphs)
  • Fully controllable six zone RGB backlight
  • Six bright white bar graph LEDs (individually dimmable)
  • Six capacitive touch buttons
  • Power, I2C, SPI, UART, PWM, and five GPIO pins broken out
  • SN3218 LED matrix driver chip (drives the RGB backlight)
  • Microchip CAP1166 capacitive touch driver chip
  • Display-O-Tron HAT pinout
  • Compatible with Raspberry Pi 3, 2, B , A , Zero, and Zero W
  • Python library
  • Comes fully assembled (breakout pins require soldering)

Software

Our Display-O-Tron Python library will get you going in a jiffy, and makes controlling Display-O-Tron HAT really easy.

We've included examples showing you how to use the backlight, bar graph LEDs, and touch buttons, as well as more advanced examples showing you how to create menus, games and even an internet radio!

Notes

If you want to keep your Pi in a case, we recommend the Pibow Coupé case as it will allow you to still use the capacitive touch buttons.

 

Tutorials & Projects

R262.23  Inc VAT
R329.90
LCD Board 2004 20x4 5V Blue screen display with controller (20x4 character display)
Description:

Adding a LCD to any project immediately kicks it up a notch. A great UI addition to any Microcontroller or Raspberry Pi project. 

Specifications:

  •     2004 204 20X4 Character LCD Display Module Blue Backlight.
  •     Blue backlight
  •     Fully assembled and tested Serial LCD 20x4 Module
  •     Display Format: 20 Characters x 4 lines
  •     Supply voltage: 5V
  •     The module can be easily interfaced with a MCU
  •     The module is a low-power consumption character LCD Module with a built-in controller
  •     Size: approx. 98mm x 60mm x 12mm

    
Package Includes:

1 x 2004 LCD Display Module

Interfacing with a 2004 and 1602 LCD
R159.90  Inc VAT
WS 5inch HDMI LCD Bi-colour case for Raspberry Pi (5 inch display and bi-colour case)
Please Note: Raspberry Pi not included.

Description:

5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi. Mid-sized Raspberry Pi or SBC 5 Inch Touch LCD with HDMI interface! Especially useful for those smaller embedded projects, such as adding LCD control to CNCs or 3D printers. 

Specifications:

The LCD
  • 800×480 high resolution, touch control
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Backlight can be turned off to lower power consumption
  • High quality immersion gold surface plating
The Case
  • Material : high quality bicolor Acrylic, black and white
  • Comes with bottom holder, optional tilt angle, 45° or 60°
  • Features mounting holes for Raspberry Pi A /B /2B/3B

Development Resources

How to install: instructions

Wiki : www.waveshare.com/wiki/5inch_HDMI_LCD

Package Includes:

  1. 5inch HDMI LCD x 1
  2. HDMI connector x 1
  3. Touch pen x 1
  4. RPi screws pack (4pcs) x 1
  5. Bicolor Case for 5inch LCD × 1
  6. Screws Pack × 1

R749.90  Inc VAT
WS 3.5inch RPi LCD (C), 480x320, 125MHz High-Speed SPI (WS 3.5 LCD display)
Features
  • 480x320 hardware resolution
  • Resistive touch control
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • 125MHz High-Speed SPI signal transmission, clear & stable display effect
  • Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie)
  • Supports FBCP software driver as well, allows to config software resolution and set up dual-display
  • Size perfectly fits the Pi (Raspberry Pi B /2B/3B/3B )
  • High quality immersion gold surface plating
  • Combined with the Raspberry Pi (refresh rate up to 50Hz), allows you to:
    • Watch videos (multi formats like MP4)
    • Play video games (RetroPie, take a bite)
    • Take photos by touching (up to 17 camera modes)
    • Use software keyboard (system interaction without keyboard/mouse)
Key Parameters
LCD TypeTFT
LCD InterfaceSPI
Touch Screen TypeResistive
Touch Screen ControllerXPT2046
Colors65536
BacklightLED
Resolution480x320 (Pixel)
Aspect Ratio8:5
Power ConsumptionTBD
Backlight CurrentTBD
Operating Temp. (℃)TBD
Interface
PIN NO.SYMBOLDESCRIPTION
1, 173.3VPower positive (3.3V power input)
2, 45VPower positive (5V power input)
3, 5, 7, 8, 10, 12, 13, 15, 16NCNC
6, 9, 14, 20, 25GNDGround
11TP_IRQTouch Panel interrupt, low level while the Touch Panel detects touching
18LCD_RSInstruction/Data Register selection
19LCD_SI / TP_SISPI data input of LCD/Touch Panel
21TP_SOSPI data output of Touch Panel
22RSTReset
23LCD_SCK / TP_SCKSPI clock of LCD/Touch Panel
24LCD_CSLCD chip selection, low active
26TP_CSTouch Panel chip selection, low active
External Dimensions



Development Resources

Wiki : www.waveshare.com/wiki/3.5inch_RPi_LCD_(C)

R369.90  Inc VAT
Full Graphic 12864 Smart Controller RAMPS 1.4 LCD 12864 LCD Control Panel Blue Screen for 3D Printer (12864 3d printer display)
Description:

LCD control panel for 3D printers. LCD control panel through which you can achieve spooling as the 3D model Gcode files are copied to the SD card and then print the file via the LCD control panel. This version is an upgraded version of the reprap smart controller.



Features:

Using a large screen 12864LCD
With a SD card base on back, put your sliced file onto the SD card and select the file on the LCD. It can then can be printed
Product comes encoder to select the desired file
Plug and play on the RAMPS, but may need to modify the firmware to support


Specifications:

Screen size:    128x64
Cable Length (cm):    30
Input Supply Voltage: (VDC)    5
Length (mm):    93
Width (mm):    87





Package Includes:

1x LCD 12864 Smart Controller 
1x Smart Adapter 
2x 30cm FC Cable

R338.90  Inc VAT
7.9inch Capacitive Touch Screen LCD 400×1280 HDMI IPS Toughened Glass Cover (WS long display)
7.9" HDMI Touch Display



Device & System Support

Raspberry Pi
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports all versions of Raspberry Pi


Jetson Nano
Supports Ubuntu, single point touch, driver free

PC
Supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free

Connection Examples

Raspberry Pi 3/4




Raspberry Pi ZERO W/WH



Jestson Nano



Mini PC



Appearance and Dimensions


Resources & Services

R1,449.90  Inc VAT
3.5 Inch LCD Display Touch Screen Monitor Case Pen for Raspberry Pi 4/4B (3.5 touch case pen)
Features:

Developed for Raspberry Pi 4 B.
3.5-inch HDMI LCD screen with touch function support systems.
Support of input resolution of 3.5 "display monitors from 480 x 320 to 1920 x 1080 (3: 2 ratio is better).
Supports HDMI audio input, stereo 3.5mm audio output.
Plug and play, easy and convenient to use.
LCD screen contains a protective cover.
ABS case: Use the top cover if you are not installing the 3.5-inch display.
 
Specifications:

Type: 3.5 Inch screen set for Raspberry Pi 4 B
LCD Type: TFT transmissive
SPI Interface: 32 MHz
Support Resolution: 480 x 320
Backlight: 6 white LEDs
Tap Chip: xpt2046

The Graphic driver is provided and can be downloaded for Raspberry Pi OS/Raspbian. It also supports Ubuntu and Kali Linux. Follow the steps here: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display


 
Package includes:

1 x 3.5 Inch LCD Touch Screen
1 x ABS Case for Raspberry Pi 4 B
1 x Touch Pen


Works with the Low-Profile CPU Cooling Fan for Raspberry Pi 4B/3B /3B with Aluminum Alloy Bracket
Not included



R469.90  Inc VAT
1.14inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240x135, SPI (ws pico display 240x135 SPI)

Description:

The ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. The resolution of this LCD is 135(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn't use all the RAM of the controller.
This LCD accepts 8-bits/9-bits/16-bits/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565.
This LCD uses a 4-line SPI interface for reducing GPIO and fast speed.LCD



Features at a glance
  • 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
  • SPI interface, requires minimal IO pins
  • 1x joystick and 2x user buttons for easy interacting
  • Comes with development resources and manual (Raspberry Pi Pico C/C and MicroPython examples)
Specifications
Operating voltage2.6 ~ 5.5VResolution240×135 pixels
Communication Interface4-wire SPIDisplay size24.91 × 14.86mm
Display PanelIPSPixel size0.1101 × 0.1035mm
DriverST7789Dimensions52.00 × 25.00mm

Raspberry Pi Pico header compatibility
  • Onboard female pin header for direct attaching to Raspberry Pi Pico
  • 1x joystick and 2x user buttons for easy interacting


Raspberry Pi Pico is NOT included.

Pinout definition



Outline dimensions



Resources & Services

R139.90  Inc VAT
15.6inch Capacitive Touch Screen LCD, 1920×1080, HDMI, IPS, Various Systems Support (15.6 cap touch display)


Connection Examples

Working with Raspberry Pi 4



Working with Raspberry Pi Zero W



Display

IPS Panel



Touch Control



Appearance and Dimensions



R3,699.90  Inc VAT
PWM 30A Dual USB Solar Panel Battery Regulator Charge Controller 12/24V LCD (30A PWM solar charge controller)
Description:

Solar panels are a clean and ecological source of electricity.

Obtaining this energy, however, poses a number of challenges for device designers. The amount of energy produced by the panel is strongly dependent on the angle of incidence and the intensity of the light falling on the surface of the cells. This, in turn, leads to unstable power supply parameters at the output, as even shading a small part of the panel may drastically reduce the efficiency.


The optimal solution to the above-mentioned problems is the use of a set consisting of a solar panel, a battery and a charge controller. Such a set allows to ensure constant parameters of power supply to receivers, and also to store energy produced excessively for later use.


The 30A-PWM-LCD solar charge controller allows you to connect panels connected to each other both in series and in parallel - remembering not to exceed the permissible values of current and voltage at the input of the device. Due to the operating characteristics of the PWM controllers, it should be remembered that when the panels are connected in series, the rated voltage at the output for charging the battery is 24V.

PWM stands for Pulse Width Modulation. PWM charge control devices can be explained as an electrical switch between batteries. The switch can be quickly switch on and switch off. Therefore, desired voltage can be obtained to charge the batteries. The charge current will be slowly decreased as the batteries charged.

Specifications:
 
Rated Voltage: 12V/24V(Auto recognition)
Rated Current: 30A
Charging Mode: PWM
USB output: 5V 2A
Self-consume: <10mA
Operating Temperature: -35 ~ 60 °C
Storage Temperature: -35 ~ 60 °C

Typical usage example:

 
Package Includes:
 
1 x 30A Solar Charge Controller
R399.90  Inc VAT
Overall Evaluation Board for Raspberry Pi Pico (Overall Evaluation Board for Pico)

The Pico-Eval-Board is an overall evaluation solution designed for Raspberry Pi Pico.


Description:

The Pico-Eval-Board is an overall evaluation solution designed for Raspberry Pi Pico. With 3.5inch 65K colorful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on-chip peripheral of the RP2040, eliminating the messy wiring. It is an ideal choice for users to fast get started with the Raspberry Pi Pico, as well as the RP2040 chip.



Specifications:

Operating voltage: 5V

  • Touch Type: Resistive
  • Communication bus: SPI
  • Display panel: IPS
  • Controller: ILI9488/XPT2046
  • Resolution: 480×320 Pixels
  • Display colors: 65K colorful
  • Pixel size: 0.153 × 0.153 mm
  • Display size: 73.44 × 48.96 mm
  • Dimensions: 86.00 × 57.20 mm

Features

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
  • 3.5inch resistive touch screen, 65K colorful, bringing clear and vivid display effect
  • Standard 3.5mm audio jack, for headphone or other audio peripherals
  • Micro SD card slot through the SDIO interface, faster access speed than SPI interface
  • Integrates battery header and recharge circuit, allows it keep running without wired power supply
  • Other rich resources like buzzer, photoresistor, and RGB LED.
  • Comes with development resources and manual (Raspberry Pi Pico C/C and MicroPython examples)



What's in the box ?

1 x Overall Evaluation Board for Raspberry Pi Pico 



Resources :

Wiki for Evaluation Board for Raspberry Pi Pico






With 3.5inch 65K colorful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on chip peripheral of the RP2040, eliminating the mess wiring.

It is an ideal choice for user to fast get started with the Raspberry Pi Pico, as well as the RP2040 chip.






R799.90  Inc VAT
Per Page      1 - 20 of 27