Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank!
R119.90  Inc VAT
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
R189.90  Inc VAT
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
R241.10  Inc VAT
Supersized(10mm) for high visibility in your project.
R17.90  Inc VAT
Resistors (330 Ohm 5%) (10 pack) (Resistor 330)

Description:

Fixed Resistors

Ideal for use with LED's on the RPi GPIO.

Specifications:

  • Fixed Resistor
  • 1/4Watt
  • 330 Ohm

Contents:

  • 10 x 330 Ohm Resistors

Resources:

 

R4.90  Inc VAT
Yellow 5mm diffused LEDs (10 pcs) (Yellow LED 10x5mm)

Description:

A packet of 10 Yellow colored LEDs

Specifications:

ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Contents:

  • 10 x Yellow LED 5mm

Resources:

Python library

Introduction

R9.90  Inc VAT
DC 4.5-30V 3 Wire LED Voltmeter Digital Display Panel Volt Meter (dc 3 wire volt meter)
Features:
 
Display Color: Red
The black line connects to the negative electrode, red line connects to positive pole of power supply, white line connects to positive pole of tested power supply
Material: Plastic Shell
Display Digit: 3
Measuring Range: DC 4.5-30V
Working voltage: 4.5-30V
Overall Dimension: Approx 28mm x 47mm x 21mm
 
Package Includes:
 
1 x Digital LED Display Voltmeter
R32.90  Inc VAT
White 5mm diffused LED (10 pcs) (White LED 10x5mm)
White LED diffused 5mm 10 units

Specification:
ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Resources:
Python library
Introduction
R9.90  Inc VAT
Blue 5mm diffused LED (10 pcs) (Blue LED 10x5mm)
Blue LED diffused 5mm 10 units

Specification:
ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Resources:
Python library
Introduction
R9.90  Inc VAT
LED RGB Common Cathode 4-Pin F5 5MM Diode (5 pack) (LED RGB (5))
Features:
 
Convenient for DIY projects
Perfect use for home, office and industry electrical equipment and electrical appliances
Current : 3V
Voltage: 20 mA
Size: 5mm 
Light Color: RED, BLUE, GREEN
Total Quantity: pack of 5

Read the Docs
https://gpiozero.readthedocs.io/en/stable/recipes.html#full-color-led
R8.90  Inc VAT
One digit Red 7 Segment 0.56 Inch 1 Bit Common Anode LED Digital Tube (7 segment single digit)
Features:

Model: 5611BH  Common Anode 
Size: 0.56 inch
Color: red

Package includes:

1 x Red 7 Segment 0.56 Inch 1 Bit Common Anode LED Digital Tube

Some code examples
https://circuitdigest.com/microcontroller-projects/raspberry-pi-7-segment-display-tutorial
https://raspi.tv/2015/how-to-drive-a-7-segment-display-directly-on-raspberry-pi-in-python
R12.90  Inc VAT
500Pcs 5MM LED Diode Kit Mixed Color Red Green Yellow Blue White (500 5mm LED kit)
Description:

There are 5 colours 5MM Red Green Yellow Blue White each 100Pcs, total 500Pcs

Parameter:

Working current: 20 (mA)
Working voltage:
  • Red: 1.9V-2.1V
  • Yellow: 1.9V-2.1V
  • Blue:3.0V-3.2V
  • Green: 3.0V-3.2V
  • White:3.0V-3.2V
MCD:
  • Red:300
  • Yellow: 300
  • Blue:700-900
  • Green: 400-500
  • White:12000-14000
Wave length:
  • Red: 630-635
  • Yellow: 588-590
  • Blue:460-465
  • Green: 567-570
  • White:Color temperature 8000

Package includes:

500 x 5MM LED Diode

Specification:
ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Resources:
Python library
Introduction
R239.90  Inc VAT
Blinkt! (Blinkt)

Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank!

Inspired by Alex Ellis' work with his Raspberry Pi Zero Docker Cluster, we developed these boards for him to use as status indicators. Blinkt! offers eight APA102 pixels in the smallest (and cheapest) form factor to plug straight onto your Raspberry Pi.

Each pixel on Blinkt! is individually controllable and dimmable allowing you to create gradients, pulsing effects, or just flash them on and off like crazy. The data and clock lines are connected to GPIO #23 and #24 respectively but for simplicity you can just use our Python library to drive them.

Features

  • Eight APA102 RGB LEDs
  • Individually controllable pixels
  • Sits directly on top of your Pi in a tiny footprint
  • Fits inside most Pi cases
  • Doesn't interfere with PWM audio
  • Blinkt! pinout
  • Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W
  • Python library
  • Comes fully assembled

Software

Our Blinkt! Python library will have you blasting out rainbows in two shakes of a unicorn's tail! There's a stack of examples too, from binary clocks to cheerlights and flickering candles to Larson scanners!

Notes

  • Be careful to plug in your Blinkt! the correct way round, it has curves on the top that match the corners of your Raspberry Pi.
  • The dimensions of Blinkt! are 65mm long x 8mm wide x 8.5mm thick (thickness includes header and pixels).

We featured Blinkt! on a special episode of Bilge Tank where we tried to come up with as many different code examples as possible in one morning. Check it out below.



Tutorials & Projects

Eight super-bright RGB LED indicators that are ideal for adding visual notifications to your Raspberry Pi without breaking the bank!
R119.90  Inc VAT
Green 5mm diffused LED (10 pcs) (Green LED 10x5mm)

Description:

A packet of 10 green colored LEDs

Specifications:


ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Contents:

  • 10 x Green LED 5mm

Resources:

Python library

Introduction

R9.90  Inc VAT
Wemos® Lolin ESP32 + WiFi + Bluetooth Dual ESP-32 ESP-32S ESP8266 OLED Module (ESP32 with OLED display)
Description:
 
ESP32 is already integrated with antenna and RF, power amplifier, low noise amplifiers, filters and the power management module.
An entire solution on the least amount of PCB area. This board is a 2.4 GHz dual mode WiFi and bluetooth chip by tsmc 40nm low power technology, power and optimized RF characteristics for a wide range of applications.
 
Features:
 
High performance
Small volume, easily embeded to other products
Strong function, with the support of lwIP protocol, freertos
Support three modes: AP, STA and AP+STA
Support for lua program, easy to develop

Package includes:

1 x Wemos® Lolin ESP32 OLED Module

R199.90  Inc VAT
PR 1.3-12 12V 1.3Ah Sealed Lead Acid Battery (12V 1.3Ah lead/Acid Batt)
12 Volt 1.3Ah Lead Acid Battery

Ideal for robotics and hobby related projects.

Housing size: 95mm x 42mm x 52mm
Weight 510mg
R109.90  Inc VAT
10pcs 5mm 940nm IR Infrared Diode Emitter/Receiver LED kit (infra red LED kit(10))
Description:

Size: 5mm
Length: 37mm
Emitted colour: Infrared
Lens color: Black/Clear
wavelength: 940nm
Forward voltage (V): 1.2-1.4V
Forward current (mA): 100mA
Transmitting and receiving distance: about 7-8 Meters

Package includes:

5 x Emitter IR Infrared Diode
5 x Receiver IR Infrared Diode
R59.90  Inc VAT
Red 5mm diffused LED (10 pcs) (Red LED 10x5mm)

Description:

A packet of 10 red colored LEDs

Description:

A packet of 10 red colored LEDs


Specifications:

ColorSizeWavelength(nm)Voltage(V)MCDLens color
Red5mm620-6301.8-2.3800-1000Red diffused
Yellow5mm580-5901.8-2.3800-1000Yellow diffused
Green5mm520-5302.8-3.6800-1000Green diffused
White5mm6000-6500k2.8-3.614000-16000Clear
Blue5mm460-4702.8-3.6800-1000Blue diffused

Contents:

  • 10 x Red LED 5mm

Resources:


R9.90  Inc VAT
5mm UV LED Emitters Transparent(5 pack) (UV 5mm LED (5))
Description


  • Premium Quality Ultra-Violet Emitters
  • Commonly used in money / watermark detectors, blood and stain detectors
  • 5mm LED diameter
  • 5 x UV 5mm LED
  • +- 3.8V 30mA
  • LED resistor calculator http://led.linear1.org/1led.wiz


Resources:
Python library
Introduction
R9.90  Inc VAT
WS True color RGB LED PHAT for Raspberry Pi (WS RGB LED PHAT)

Overview

This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.

Features

  • Supports any revision of Raspberry Pi (directly plugable)
  • Onboard 4 × 8 RGB LED (WS2812B)
  • Control pin is configurable via jumpers (0Ω resistor)
  • Break out control pins, easy for working with other MCUs
  • Comes with development resources and manual (examples in Python and Web control)

Specifications

  • Operating voltage: 5V
  • Brightness: adjustable 256 levels
  • Color depth: 24-bit true color (8-bit for R/G/B respectively, totally 256x256x256=16777216 colors)
  • Data rate: 800Kbps(typ)
  • Dimension: 65mm × 30.2mm
  • Mounting hole size: 3.0mm

How to Use

In the case of working with a MCU:

  • 5V ↔ 5V power
  • GND ↔ GND
  • DIN ↔ Signal input
  • DOUT ↔ Signal output (optional)

Development Resources

Wiki : www.waveshare.com/wiki/RGB_LED_HAT

This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
R189.90  Inc VAT
WS .RGB LED HAT for Raspberry Pi, colorful display, 8 × 8 grid (WS RGB LED HAT)

Overview

This RGB LED HAT (B) can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.

Features

  • Supports any revision of Raspberry Pi (directly-pluggable)
  • Onboard 8 × 8 RGB LED (WS2812B)
  • Control pin is configurable via jumpers (0Ω resistor)
  • Break out control pins, easy for working with other MCUs
  • Comes with development resources and manual (examples in Python and Web control)

Specifications

  • Operating voltage: 5V
  • Brightness: adjustable 256 levels
  • Color depth: 24-bit true color (8-bit for R/G/B respectively, totally 256x256x256=16777216 colors)
  • Data rate: 800Kbps(typ)
  • Dimension: 65mm × 56.2mm
  • Mounting hole size: 3.0mm

How to Use

In the case of working with a MCU:

  • 5V ↔ 5V power
  • GND ↔ GND
  • DIN ↔ Signal input

Development Resources

Wiki : www.waveshare.com/wiki/RGB_LED_HAT_(B)

This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
R241.10  Inc VAT
10mm F10 Red Yellow Blue Green White Diffused Bright 5K MCD LED Diode (10) (mixed Big LED 10x10mm)
Features:
 
Great for electronic projects and kits.
Perfect use for home, office and industry electrical equipment and electrical appliances
Size: 10mm
Voltage:1.8V ~ 2.2V for Red, Yellow 
               3.0V ~ 3.4V for Blue, Green and White
Current: 20 mA
Luminous Intensity: 5000 MCD
Color: RED, BLUE, YELLOW, GREEN, WHITE
Lens Color : Diffused
Total Quantity: 10pcs (2pcs of each colour)

10Pcs Five Colors 10mm Round Bright Light LED Assortment Kit
ColorSizeCurrent(mA)Lens ColorQuantity
Red10mm20red2Pcs
White10mm20white2Pcs
Yellow10mm20yellow2Pcs
Green10mm20green2Pcs
Blue10mm20blue2Pcs
 
 
Package includes:
 
10 x 10mm LED (Assorted Kit)

Resources:
Python library
Introduction
Supersized(10mm) for high visibility in your project.
R17.90  Inc VAT
Resistors (3.3K Ohm 5%) (10 pack) (Resistor 3.3K)
Pic is for illustration purposes only

Resistors 1/4Watt 3.3K Ohm


Ideal for use with LED's on the RPi GPIO.

10 pack

Resources:

Resistors basics
Types of Resistors
Resistor colour codes
R4.90  Inc VAT
LED Traffic Light Building Block Board 5V (traffic light 5V Arduino)
Features:
 
Size: 56mm x 21mm x 11mm
Fixing hole: 3mm
Pitch: 15mm
Color: red yellow green
LED: 5mm x 3
Brightness: Normal brightness
Voltage: 5V
Input: Digital level
Interface: common cathode, red, yellow and green separate control
Platform: Arduino, microcontroller
 
Package includes:
 
1 x LED Traffic Light Module

Read the Docs
R19.90  Inc VAT
Per Page      1 - 20 of 62