Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R219.90  Inc VAT
The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format.
R129.90  Inc VAT
Designed with learning in mind
R89.90  Inc VAT
R24.90  Inc VAT
6V/12V 10A Solar PWM Charge Regulator With Intelligent LED Indicator (mini solar charge controller)
Features:

PWM controller,Long standby time
Three stage charging can effectively improve battery life.
Easy installation and easy operation
LED indicator, battery power display
Manual adjustable discharge mode


Specifications:

Charging mode: PWM
System current:5A/10A
Voltage:6V/12V
Interior input power:≤30W/≤60W
Overload, short circuit protection: 1.5 times rated current, five minutes off;Five minutes to recover
Rated voltage no-load current:≤6mA


Package includes:

1x Solar controller
1x User manual
R179.90  Inc VAT
Geekcreit® Assembled Aluminum Heating Block Extruder Hot End For 3D Printer 1.75mm MK8 0.4mm Nozzle (1.75mm block extruder hot end)
Specifications:

Material: Aluminum & Stainless Steel & Brass
Installation type: External thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range: -40°C to +260°C (-40°F to +500 °F)
Thermistor and heater cable length: 1M

Features:

Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).
MK8 Extruder Hot End kit, white wire is temperature thermistor, red wire is heating tube 12V40W.

Package included:

1 x Aluminum block
1 x Heating tube (heating tube 1 m long, 12V 40W)
1 x 1.75MM 0.4MM Brass Nozzle
1 x M6 x 30mm Throat pipe (built-in Teflon)
1 x Thermistor + Brass sleeve (1 meter long)
R169.90  Inc VAT
12V Alarm Red security Flashing Light (red flash light alarm)
Specification:

Rated voltage: 12V DC
Rated current: 120mA
Strobe rate: 90s / minute
Diameter: 7.2cm
Height: 4cm
Lamp cover color: red

Features:

Led strobe flashing light
Suitable for security, status etc...
Also ideal for construction site as a warning light

Note:

This product only has a flashing light, no sound.

Package includes:

1 x Alarm Signal Lamp
2 x Bases
4 x Screws
R159.90  Inc VAT
12V 7Ah Sealed Lead Acid Battery (12V 7Ah lead/Acid Batt)
12 Volt 7Ah Lead Acid Battery

Ideal for robotics and hobby related projects.

Housing size: 150mm x 65mm x 100mm
Weight 1982mg
R209.90  Inc VAT
Suleve™ M3AS9 4Pcs M3 40mm Knurled Standoff Aluminum Alloy Anodized Spacer Red (Red 40mm standoff)
Description:
M3 40mm Knurled Standoff can be used for connecting rod, pulling rod or custom cases

Specifications:
Brand: Suleve
Model: M3AS9
Material:Aluminum 6061
Colour:Available in Black, Dark Blue and Red
Thread Diameter: 3mm (M3)
Length:40mm

Package includes:
4 x Knurled Standoffs
8 x cheesehead M3 x 6mm screws

R59.90  Inc VAT
Suleve™ M3AS9 4Pcs M3 40mm Knurled Standoff Aluminum Alloy Anodized Spacer Black (Black 40mm standoff)
Description:
M3 40mm Knurled Standoff can be used for connecting rod, pulling rod or custom cases

Specifications:
Brand: Suleve
Model: M3AS9
Material:Aluminum 6061
Colour:Available in Black, Dark Blue and Red
Thread Diameter: 3mm (M3)
Length:40mm

Package includes:
4 x Knurled Standoffs
8 x cheesehead M3 x 6mm screws

R69.90  Inc VAT
White – Scroll pHAT HD (HD scroll phat white)

Scroll pHAT HD

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!

Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-aliased text by taking advantage of the per-pixel brightness.

Now also available in beautiful coloured versions: red, orange, yellow, green, blue, and pink!

Use Scroll pHAT HD as a scrolling message display for your tweets, the weather or the news, or use it as a 17-band spectrum analyser for your audio. There's even enough pixels for simple games like Tetris, Pong, or snake.

Features

  • 17x7 matrix of bright white, or coloured, pixels (119 total)
  • Individual PWM brightness control of each pixel
  • Uses the IS31FL3731 LED matrix driver chip
  • Scroll pHAT HD pinout
  • Compatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W
  • Python library
  • Female header requires soldering

Software

Our handy one-line installer will install the Scroll pHAT HD Python library for you. We've included a bunch of examples too, to show off what you can do with Scroll pHAT HD.

Our software does not support Raspbian Wheezy.

R219.90  Inc VAT
JAM HAT (LED & Buzzer Board) (JAM Hat)

Please note: Raspberry Pi is not included with this board

Buttons, buzzers and bright LEDs! If you're starting on your Raspberry Pi journey, we've got the board just for you. ModMyPi has teamed up with York Pi Jam to bring you the JAM HAT!

Each board is fully assembled, ready to plug and play, and features:

  • 6 x "Traffic Light" LEDs (2 x Red, 2 x Yellow, 2 x Green)
  • 2 x Tactile "Push to Make" Buttons
  • 1 x Buzzer/Sounder

The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format, with fully supported examples and code! The JAM HAT has the Pi's GPIO fully exposed, leaving you free to connect other hardware as your projects grow!

The product comes fully assembled with our push-fit "plug & play" Single Shroud Header, Socket Header, and 14mm HAT Mounting Kit, so there's no soldering required, just plug in and bleep bleep bloop, flashy flash, click click!

Features:

  • Fully Assembled - No Soldering!
  • Mounting Hardware Included
  • HAT Format
  • GPIO Exposed for External Connections
  • Works with Python or Scratch
  • Full Code Libraries & Examples Available (work in progress) at https://github.com/modmypi/Jam-HAT
  • 2 x Tactile "Push to Make" Buttons
  • 6 x "Traffic Light" LEDs (2 x Red, 2 x Yellow, 2 x Green)
  • 1 x Buzzer/Sounder


More info available about Raspberry Jam at https://projects.raspberrypi.org/en/jam/jam

The JAM HAT is the perfect add-on board for learning how to code electronic hardware with the Raspberry Pi, and designed for use by beginners, schools and coding clubs in an easy-to-use, clearly laid out format.
R129.90  Inc VAT
1M WS2812 IC SMD5050 Dream Color RGB Non-Waterproof LED Strip Light Individual Addressable DC5V - Black (RGB strip 1m)
Features:
-Excellent, high quality intelligent lighting.
-Every LED is cuttable.
-Based on high quality SMD5050 RGB LEDs embed(Built-in) integrated WS2812 control ICs.
-Each LED is independently addressable,opening up entirely new lighting possibilities.
-One WS2812 IC Control 1 LED Chip.

Specifications:
Voltage:DC5V
Length:1m
Width: 10mm
Power:9W
Color:Black PCB/White PCB
LED Resource:WS2812 LED
LED Quantity:30
Protection Rate:Non-Waterproof IP30
Light Color:Full Color RGB, Dream Color Changing

Package includes:
1 X RGB LED Strip Light
(Power supply is not included)

How to use WS2812 LED strip with a Raspberry Pi
R219.90  Inc VAT
Portable LED tester 2-150mA (LED tester)
Material: Plastic
Color: White
 
Handy device for testing LED's. Simply plug your LED into the correct holes (all of which are marked) and push the button to see its brightness, illuminant color, etc.
Handy device for testing LED's (2-150mA)

The top row is for 2 pin LED's with currents ranging from 2mA - 30mA
The bottom row is for 4 pin LED's (piranha LED's) with currents ranging from 20mA - 150mA
 
Lightweight & compact
Powered by a 9V battery (not included)

Item size(L*W*H) : Approx. 80mm x 55mm x 22mm
Quantity: 1PC
R89.90  Inc VAT
HT16K33 LED Dot Matrix Drive Control Module Digital Tube Driver Development Board (HT16K33 LED Dot Matrix Driver)
Description:

The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patterns (16 segments and 8 commons) with a 13*3 (MAX.) matrix key scan circuit. The software configuration features of the HT16K33 makes it suitable for multiple LED applications including LED modules and display subsystems. The HT16K33 is compatible with most microcontrollers and communicates via a two-line bidirectional I2C-bus.

Features:

Operating voltage: 4.5V~5.5V.
Integrated RC oscillator.
I2C-bus interface.
16*8 bits RAM for display data storage.
Max. 16 x 8 patterns, 16 segments and 8 commons.
R/W address auto increment.
Max. 13 x 3 matrix key scanning.
16-step dimming circuit.
Selection of 20/24/28-pin SOP package types.


Applications:

Industrial control indicators.
Digital clocks, thermometers, counters, multi meters.
Combo sets.
VCR sets.
Instrumentation readouts.
Other consumer applications.
LED Displays.


Package included:

1 x Module

Getting Started

R45.90  Inc VAT
Red Cover LED SPST Toggle Rocker Switch Control 12V 20A (red cover toggle switch)
Description:
 
Input: 12V 20A
Color: Red
Light color: Red Light
Condition: 100% brand new
Switch Actuation Style: Rocker
Size: Approx.1.4cm x 6.5 cm(W x H)
Use: can be use as a switch for various additional electric equipment inside & outside 
the car.(Such as Critical lights,chassis lamp,fog lamps,dome light)
 
Package Includes: 

 
1 X Toggle Switch

Resources:

Introduction to Buttons and Switches
Types of buttons and switches

R94.90  Inc VAT
Pi Stop - Traffic Light Add-on for Raspberry Pi (GPIO 3.3V stand traffic light)

The Pi-Stop is a low cost hardware module designed to allow Raspberry Pi users to take their first steps into interfacing with the real world.

Designed with the learning in mind, everyone will recognise and identify its familiar elements encouraging their use along-side their own projects.

Move past the Stop light

The Pi-Stop is designed to remove many of the common hurdles people are faced with when getting started using hardware with the Raspberry Pi. Often it is difficult to know what components to use and how to connect them, the Pi-Stop makes it simple by plugging directly onto pre-set positions on the Raspberry GPIO connector.

By plugging the Pi-Stop directly on to the Raspberry Pi GPIO header, no extra cables or wires are needed. Unlike many other add-on boards, they do not block unused GPIO pins, keeping them open for other uses. The Pi-Stop can be fitted in 4 standard locations, allowing up to four Pi-Stops to be controlled independently or combined with other hardware.

Prepare to go!

The Pi-Stop provides a simple stepping stone, between pure screen based programming and using physical hardware to interact with the real world. Components like the Pi-Stop will provide a flexible and non-restrictive way to build understanding through experimenting.

Since it is only a step away from a bag of components, it also allows the programming of hardware to be introduced, and the electronics involved can be introduced separately, if desired. Allowing the pupils to discover they can control real things, and then again to discover they can also build their own circuits and control them in exactly the same way.

Often, people are faced with a magic board which they plug in and tell it to do stuff, however it isn't always clear to them why or how it does it. By providing something which they can remove and replace with something (apparently) completely different (- wires, breadboards and LEDs) they will be able to understand the link.

By keeping the hardware very simple, it allows better understanding of what is happening, and allows space to come up with your own projects and apply the concepts with your own ideas in mind.

GO Full throttle

The documentation and guides are openly available for the Pi-Stop for educational use. There will be guides, tutorials and workshop material available all of which can be taken as is[available as PDF format] or adapted to your own needs [available in markdown format].

It is encouraged that similar materials can be submitted back for others also to share and make use of.

The materials will demonstrate the concepts, methods and provide the building blocks to explore ideas and take learning further by with creative projects, activities and games.

Pi-Stop Documentation

The following material is available (in both PDF and markdown format):

Designed with learning in mind
R89.90  Inc VAT
K11 Wired Gaming Keyboard 28 Keys LED Backlit Usb Ergonomic Pro Gamer Left/Right Hand Single-hand Control Keypad for PC Laptop (Gamer keyboard)

A>MINI PORTABLE. 28 keys, portable size so you can carry everywhere anytime, and with Wrist Rest, perfect for one hand control, left or right hand, convenient to control, humanized design.

B>1 RAINBOW BACKLIGHT. "Fn + Esc": Turn on/off the light. "FN+3": Increase the backlight; "FN+4": Weaken the backlight, and the backlight will turn off when it is weakest. "Fn + Alt/Ctrl": Switching to the Breathing Light.

C>MULTIMEDIA KEYS & SHORTCUTS. Easy-access dedicated multimedia controls, it is convenient and easy to switch between gaming. "Fn+1" equals to F1; "Fn+2" equals to F2; "Fn+5" changes to "m".

D>ERGONOMIC DESIGN. Delicate appearance, humanized design, large and soft rubber palm rest ensures you long time using without feeling tired, perfect for single hand user, convenient to control.

E>BROAD COMPATIBILITY. Plug and play support, compatible with Windows 8/los/android and other systems. Used with Notebook / Desktop PC. Perfect for the home office or workplace.

Specifications:

Working voltage :5V

Type: wired single-handed gaming keyboard

Model : K11

Apply For Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, Mac OS X

Key-press force: 55±10g

Keystroke lifetime: :≥50 million

USB Cable Length: 1.2m

Product weight:350g

Interface: USB

Keys : 28 Keys

Size : 155mm x 185mm x 28mm

Packing Includes:

1 x Gaming Keyboard
R228.85  Inc VAT
R319.90
Automatic DC 5V-30V 10A Infrared PIR Motion Sensor Switch For LED Light Strip (black pir switch DC)

Description:

  • Influence control: Light Infrared PIR
  • Two light modes:all day/at night(Auto switching on when detecting people coming.)
  • Super energy saving, super sensitivity within 7 meter distance.
  • Built in light sensor which can identity day and night by itself,
  • Sensor sensitivity distance: ≥7m
  • Sensor sensitivity angle: 145°
  • Load current:10A
  • Working voltage:DC 5V-30V
  • Delay time: If people leave, light will delay 30s-150s(Adjustable) to turn off
  • Certificate: CE
  • Suitable for use in homes, wardrobes, kitchens, stairs, camping tents...
  • Size:50mm x 43mm x 20mm(approx)
  • 5.5 x 2.1mm male to male cable length:1M(approx)
  • 5.5 x 2.1mm male to female cable length:1M(aprpox)
  • Color:Black
Package includes:
  • 1 x PIR sensor
  • 1 x 5.5 x 2.1mm male to male cable
  • 1 x 5.5 x 2.1mm male to female cable
R249.90  Inc VAT
Creality 3D® 1.75mm 0.4mm MK10 Assembled Aluminum Extruder Hot End kit For 3D Printer (hot end replace part)
Features:

-If your extruder is damaged or consumable objects leaking you can replace it.
-This is a replacement part for Mk8 extruder with precise size and easy connection.


Specifications:

Materials:Aluminum+stainless steel+brass
Resistance:R
(25°C)= 100k±1%
Operating Temperature Range:-40°C
~+300°C
Connection Method:external line connection
Heating Block:12V 40W
Application: 3D printer
Nozzle Size:1.75mm 0.4mm
Throat Pipe Length: 30mm
Cable Length:1m

Package Includes:

1x Aluminum block
1x Heating tube (heating tube 1 m long, 12V 40W)
1x 1.75MM 0.4MM Brass Nozzle
1x M6 x 30mm Throat pipe (built-in Teflon)
1x Thermistor + Brass sleeve (1 meter long) 
R459.89  Inc VAT
Raspberry Pi 3 Model B+ GPIO-232 Expansion Board LED Nixie Tube 485 232 UART Keys Multifunction GPIO Extension Board (GPIO training board)

Description:


1. RS485 module
2. RS232 module(green DB9)
3. EEPROM (24 c16)
4. Three LEDs
5. Three buttons
6. A buzzer
7. 4 in 1 digital tube
8. The rest of the IO mouth raises
9. TF card module (SPI)

 

 

Package Includes:

1 X GPIO Expansion Board

R379.90  Inc VAT
DC 0-100V 10A Digital Voltmeter Ammeter Dual Display Gauge 0.28" Red Blue LED (volt/amp meter 10A)
Description

  • Voltage 0.0V to 100V
  • Current 0A to 10A
  • Working voltage DC 4 to 30V
  • Working current <20mA
  • Size 48mm x 29mm x 22mm

R54.90  Inc VAT
100K ohm 100cm NTC Thermistors with cable for Reprap Mend glass sealed thermistor 3950 Resistant hotend sensor (thermistor cable)
Description

(1) Electrical characteristics
A: Resistance value: R(25°C)=100K±1%
B: B Value: B=3950±1% (calculated from resistance value at 25°C and 50C)
C: Insulation resistance 50MΩ or over by DC500V megger (between glass and lead wire)
(2) Thermal time constant (τ): τ≤10~17s (in still air)
(3) Thermal dissipation constant (δ): δ=1.1~1.6mW/°C (in still air)
(4) Operating temperature range:-50~+260°C
 
Package Includes:
1 x  NTC Thermistor with cable
R42.90  Inc VAT
10pcs LilyPad LED Modules (wearable led's(10))
Description:
  • Operating voltage: 3-5V
  • Operating current: 40MA
  • Weight: 1g (5 by one weight)
  • Size: 12.7 mm x 5.2mm x 2.2mm


Package Includes:

10 X LilyPad Led Module

Documents:

R24.90  Inc VAT
Per Page      21 - 40 of 63