Search
Search Criteria
Products meeting the search criteria
Specifications:
This solenoid electric magnet is suitable for vending machines, office facilities, transport equipment, appliances and much more.
It can be fixed and connect load easily, heat up stablely to prolong life of product and ensure good performance.
Specification :
Input Voltage : 12V DC
Holding Force : 5N
Operating Temperature : -5 - 40℃ non-condensing
Operating Humidity : relative humidity 45%-85% non-condensing
Saving Temperature : -45 - 75℃ non-condensing
Saving Humidity : relative humidity 0%-95% non-condensing
Stroke : 10mm
Fram Size : 30(L)x13(W)x15(H)mm
Package Includes :
1 x DC 12V 0.4N Push-Pull Open Frame Solenoid Electric Magnet
The 1/2" 2 way, 90 Degree, 2 port 12 V DC NPT Normally Closed Electric Solenoid Valve converts electrical signals to pneumatic functions as part of a larger system that allows users to interlock, isolate, and connect individual units of a larger operation.
DC 12V Electric Solenoid Valve 1/2 Inch Hose Magnetic Water Air Inlet Flow Switch
Specification:
| Material | Metal Plastic |
| Color | As per picture |
| Voltage | DC12V |
| Rated Power | 5W |
| Pressure | 0.02- 0.8Mpa |
| Interface Modes | 1/2'' Hose |
| Working Time | 5 hours at once (Max) |
| Insulation Class | E |
| Fluid Temperature | 0-90°C |
| Size | L*W*H/75*60*45mm/2.95*2.36*1.77'' |
| Inner diameter | 14mm/0.55'' |
| External diameter of thread | 20mm/0.78'' |
1 x Electric Solenoid Valve
Please note:
The actual valve size in the unit is smaller than the port size as you will find with most taps.
Description:
The Magnum soldering Tips can be used with the whole range of our soldering irons and soldering stations.
What's in the box?
1 x solder tip
Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
>- Upgrade Cmagnet Build Surface plate
- Easily removal of 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for the next round of printing.
Specifications
Size: 235mm x 235mm
Applications: For Ender-3
Package Includes:
1x Top magnet plate
1x Bottom magnet plate with double sided tape
The first ever Code Club book is here! With it, you'll learn how to code using Scratch, the block-based programming language. In each chapter you’ll find instructions to build cool games, animations, and interactive stories. Your friendly robot guide will aid you step-by-step through each project and give you handy tips along the way.
• Learn to code using Scratch, the block-based language
• Follow step-by-step guides to create games and animations
• Use the magic glasses to reveal secret hints
• The spiral binding allows the book to lay flat
• Includes 24 exclusive Code Club stickers!
Get this kit to keep your kids occupied with hands-on activities while enjoying the simple DC brushed motor from this kit when it is completed. This DIY kit is simple enough to be built by 4 years old children, with parent's help. And children 6 years old and above can build it by themselves! Let's them explore the fundamental of DC brushed motor, and also electromagnetic. What causes the coil to generates a magnetic field to push or pull the coil itself?
- In case you want to learn about DC brush motors:
https://www.youtube.com/watch?v=LAtPHANEfQo
- Your kids can always follow the video to build the motor or if you prefer the step by step guide in a document, we have also produced an instruction manual in English:
Note: Not suitable for children under 4 years old!
Features:
- Do It Yourself wooden magnetic DC motor for kids
- Suitable for age 4 years old and above
- Come with everything needed to assemble it
- Powered with two (2) AA-size battery (not included in this kit)
- No soldering is needed
- Learn about the electromagnetic principal
What's in the box?
- 1 x Ice cream stick
- 2 x Wire terminal as the brush motor coil
- 1 x AA battery holder with blade switch
- 2 x Wooded pole with hole
- 1 x Double-sided tape
- 1 x Wooded pole without hole
- 1 x 7. 2cm diameter plastic bottle
- 2 x Magnet Disc
Resources:
- Simple Instruction Manual (pdf) available at https://drive.google.com/file/d/1p0UPU8ADLOGYka_lz3OWIxzmNDq9jBUb/view
- Assembly instructions video available at https://youtu.be/UH1eYEZLvHc
A much needed accessory for the entire range of Magnum Soldering Irons and Soldering Stations.
This Magnum cast iron soldering spring stand allows for a clean, safe and organised work surface. Included with a cellulose sponge.
What's in the box?
1 x Soldering iron stand
1 x Soldering Sponge
Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
Description:
The Magnum soldering Tips can be used with the whole range of our soldering irons and soldering stations.
What's in the box?
1 x Solder tip
Resources:
Introduction to soldering
Video: How to solder properly
The secrets to good soldering
Ideal for beginners, this official guide contains everything you need to get started with Raspberry Pi, including a hardware starter kit:
- Raspberry Pi 3A computer
- Official Raspberry Pi 3A case
- 16GB microSD card preloaded with NOOBs
The accompanying 116‑page book is packed with beginner’s guides to help you master your new Raspberry Pi!
- Set up your new Raspberry Pi 3A for the first time
- Discover amazing software built for creative learning
- Learn how to program in Scratch and Python
- Control electronics: buttons, lights, and sensors
You might need the following if you don't already have:
- Official Raspberry Pi Power supply
- Official HDMI cable 1m white
- Official Raspberry Pi Keyboard Red/White
- Official Raspberry Pi Mouse Red/White
Inside the chip are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a 3-axis magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. The third is a 3-axis gyroscope that can measure spin and twist. By combining this data you can REALLY orient yourself.
Design your own activity or motion tracker with all the data... Adafruit spun up a breakout board that has all the extra circuitry you'll want, for use with an Arduino (or other microcontroller).
The LSM9DS1 is not the same set of sensors as the LSM9DS0. Here are some of the differences:
- LSM9DS0 accelerometer has ±2/±4/±6/±8/±16 g ranges. The LSM9DS1 has ±2/±4/±8/±16 g (no ±6 g range).
- LSM9DS0 magnetometer has ±2/±4/±8/±12 gauss ranges. The LSM9DS1 has ±4/±8/±12/±16 gauss ranges. So the LSM9DS0 has ±2 gauss low range where-as the LSM9DS1 has ±16 gauss high range.
- LSM9DS0 and LSM9DS1 gyros both have the same ±245/±500/±2000 dps ranges.
There are other differences, for example we noticed the LSM9DS1 has slightly worse accuracy. The gyro angular zero-rate (±25 for the LSM9DS0 and ±30 for the LSM9DS1 at the highest sensing range). The accelerometer offset accuracy is ±90 mg for the LSM9DS1 and ±60 mg for the LSM9DS0.
However, these offsets may not matter for most projects and the pricing of the LSM9DS1 is lower than the LSM9DS0.
The breakout board version of this sensor has both I2C and SPI interfaces. Attaching it to the Arduino is simple, power Vin and GND with 3-5VDC, and wire up I2C data on SCL and SDA, and you're ready to go! More advanced users can use SPI, the library has support for both. The breakout comes fully assembled and tested, with some extra header so you can use it on a breadboard. Four mounting holes make for a secure connection, and Adafruit put the popular power data pins on one side, and the interrupt pins on the other side for a nice & compact breakout.
TECHNICAL DETAILS
- Datasheets, PCB CAD files, and Fritzing objects available in tutorial
- Product Dimensions: 33.4mm x 20.4mm x 3.0mm / 1.3" x 0.8" x 0.1"
- Product Weight: 2.5g / 0.1oz
- 1