Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Geekcreit® MEGA 2560 R3 ATmega2560-16AU MEGA2560 Development Board With USB Cable (Arduino Mega)
Description:

Arduino compatible R3 Mega2560 ATmega2560-16AU control board with USB cable
Arduino Mega is an ATmega2560 core microcontroller development board. Itself has 54 digital input/output terminals (14 PWM outputs), 16 simulation inputs, 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writers. Supply part of the optional USB power, or external power using a AC-to-DC adapter and battery.
Rapid growth due to open original code, as well as the concept of using Java (cross-platform) C language development environment for Arduino module. The Arduino can easily use the Arduino language with Flash or Processing ... software communication, to make multimedia interactive works. Arduino development IDE interface is based on open-source principles, allows you to download for use in projects.
Power supply design:
There are two options for the power supply system of the Arduino Mega. USB direct power supply or external power supply. The power supply will be switched automatically. External supply AC-to-DC adapter or the battery can be selected on this control panel. Limit the voltage range of 6V ~~ 12V, but if the voltage supplied is less than 6V, I / O port may not be supplied to a voltage of 5V, and therefore not stable; If the voltage is greater than 12V, the regulator device may possibly overheat and damage the Arduino MEGA. It is therefore recommended that for the operating supply of 6.5 ~ 12V, the recommended power supply is 7.5V or 9V.
The development board have been rigorously tested at the factory.

Specification:

Microcontroller: ATmega2560
Operating voltage: 5V
Input voltage (recommended): 7-12V
Digital I/O pins: 54 (of which 14 provide PWM output)
Analog input pins: 16
DC current per I/O pin: 40 mA
DC current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 4 KB is used by the bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16MHz


Getting started with Arduino products

Package includes:

  1 x Control board
  1 x USB cable
R349.90  Inc VAT
Mega2560 + WiFi R3 ATmega2560+ESP8266 32Mb memory USB-TTL CH340G. Compatible for Arduino Mega NodeMCU For WeMos ESP8266 (Mega2560 + wifi)

Features:

Full integration on one board: Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb (megabyte)
All of the modules can work together or each separately. And everyone has their own pinout headers
The convenient solution for the development of new projects requiring Uno and WiFi
Via USB you can update sketches and firmvare for ATmega2560 and for ESP8266. For this on board have the USB-serial converter CH340G
Use this board is very simple
The board has DIP-switch, to connect the modules
For example, to: USB and ATmeg2560, USB and ESP8266, ATmega2560 and ESP8266
 
Table DIP- Switch:
 
Connection                                                                                       DIP
ATmega2560<->ESP8266 
1            2           3             4           5             6              7
ON         ON        OFF       OFF          OFF        OFF          OFF
USB <->ATmega2560                               
OFF        OFF       ON        ON         OFF        OFF          OFF
USB<->ESP8266 (Update firmware or sketch)
OFF        OFF       OFF       OFF        ON         ON           ON
USB<->ESP8266 (communication)           
OFF        OFF       OFF       OFF        ON         ON           OFF
All independent                                       
OFF        OFF       OFF       OFF        OFF        OFF          OFF
 
Special solution:
USB <->ATmega328<-> ESP8266
                                                                                       DIP                                        SWITH 2
Connection                                        1       2       3      4      5         6           7
 
USB <-> ATmega2560<-> ESP8266    ON    ON    ON      ON   OFF    OFF      OFF          To RXD3/TXD3
 
 
USB converter CH340G connect to RX0/TX0 of ATmega2560
ESP8266 connect to RX3/TX3 of ATmega2560

Documents

Dimensional drawing

Dimensions MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBDimensions MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Pinout

Pinout MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBPinout MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Schematic

Schematic of MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

Drivers

Windows driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBLinux driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBMac OS driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBAndroid driver for MEGA+WiFi R3 ATmega2560+ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

 
Package Contents:
1 x Mega + WiFi Board
R309.90  Inc VAT
UNO R3 SMD (CH340G) MEGA328P for Arduino UNO R3 + USB CABLE ATMEGA328P-AU Development board (UNO SMD fixed IC)
Product introduction
UNO R3 is a microcontroller board based on the ATmega328P.

It has:
- 14 digital input/output pins (of which 6 can be used as PWM outputs)
- 6 analog inputs
- a 16 MHz quartz crystal
- a USB connection
- a power jack
- an ICSP header
- a reset button.

It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.


Package Includes:

1 x Arduino Uno SMD
1 x Headers
1 x USB cable

Getting started with Arduino products
R159.90  Inc VAT
LilyPad 328 Main Board ATmega328P ATmega328 16M For Arduino (Lilypad)

This is the LilyPad main board consisting of an ATmega328 using 5V DC power.

The latest version of the LilyPad supports automatic reset for even easier programming.

The back side of the LilyPad is now completely flat! We now use a surface mount programming connector to keep the header from poking through.



This version of the LilyPad now uses the new ATmega328 at 8MHz. 0016 supports the Pro Mini 328/8MHz/16MHZ. Use this setting when using this new LilyPad 328.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing.

Various input, output, power, and sensor boards are available. They're even washable!

 

Package Includes:
1 x 328 Main Board

R69.90  Inc VAT
ATMEGA8 ATMEGA8A-PU DIP28 (Arduino IC)
Description:

The ATMEGA8A-PU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 8kb ISP flash memory with read-while-write capabilities, 512B EEPROM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte oriented two-wire serial interface, 6-channel 10-bit A/D converter (8-channel in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator, SPI serial port and five software selectable power saving modes. The device operates between 2.7 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

  •     High-performance, Low-power AVR® 8-Bit Microcontroller
  •     Advanced RISC Architecture
  •     High Endurance Non-volatile Memory Segments
  •     Atmel QTouch® Library Support
  •     Power-on Reset and Programmable Brown-out Detection
  •     Internal Calibrated RC Oscillator
  •     External and Internal Interrupt Sources
  •     Idle, ADC Noise Reduction, Power-save, Power-down and Standby Sleep Modes
  •     2.7 to 5.5V, 0 to 16MHz Operating Voltage
  •     3.6mA Active, 1.0mA Idle Mode and 0.5µA Power-down Mode Power Consumption

Applications:

Building Automation, Consumer Electronics, Motor Drive & Control, Industrial, Automation & Process Control, Metering
R74.90  Inc VAT
Pro Mini ATMEGA328P 5V/16MHz for arduino (Pro Mini ATMEGA328P)
It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the “RAW” pin and not VCC.

 

Features:

  •     ATmega328 running at 16MHz with external resonator (0.5% tolerance)   
  •     0.8mm Thin PCB   
  •     USB connection off board   
  •     Supports auto-reset   
  •     5V regulator   
  •     Max 150mA output   
  •     Over current protected   
  •     Weighs less than 2 grams!   
  •     DC input 5V up to 12V   
  •     On board Power and Status LEDs   
  •     Analog Pins: 8   
  •     Digital I/Os: 14   

Getting Started
Getting started with Arduino products
R119.90  Inc VAT
ATmega328P Arduino Compatible Nano V3 Improved Version (Arduino nano)
This Arduino Nano comes with the old bootloader

Specifications:

Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz

Package includes:

1 x Arduino Compatible Improved Version Nano V3.0 with headers pre-soldered

Getting started with Arduino products
R109.90  Inc VAT
UNO R3 MEGA328P ATMEGA16U2 for Arduino Compatible (Uno Board DIP IC)

Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online.

Find more info on Arduino at https://www.arduino.cc/en/guide/introduction

Description:

 Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM 2 KB (ATmega328)
EEPROM 1 KB (ATmega328)
Clock Speed 16 MHz
Length 68.6 mm
Width 53.4 mm

Package includes:

1 x UNO R3
1 x USB cable


R199.90  Inc VAT
R234.90
Geekcreit® ATmega328P Arduino Compatible Nano V3 + Nano Shield Expansion Board Kit (nano expansion kit)
Changed the USB chip, improve the download speed and stability of WIN7/WIN8
Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz

NANO Shield Expansion Board Description:

This Nano Mult-Function expansion board is designed specially for Arduino Nano, solving the problem of confusing wiring when a variety of sensors connected.
Lead out all digital IO port and analog IO port, each one with standard positive and negative power interface.
Lead out the I2C interface of mainboard for convenient connection.
Increasing the DC power supply interface. Nano USB interface supply current is actually only 50MA, to bring high-current devices, such as the steering, is obviously insufficient. So in the DC power connector provide external power supply to ensure the stability of equipment operation.

Package includes:

1 x ATmega328P Arduino Compatible Nano V3 with USB cable
1 x NANO Shield Expansion Board

Getting started with Arduino products
R189.90  Inc VAT
Transparent Acrylic Case For Arduino MEGA2560 R3 Module Board(Arduino is not included) (Mega Acrylic case)
Feature:

Name: Arduino MEGA2560 R3 DIY acrylic case
Dimensions: 118 x 72 x 18mm
Weight: 72g
Material: A level acrylic
For Arduino MEGA2560 R3 Development Board only

Please Note:
Arduino Mega is not included.
Don't forget to remove the protective film from the acrylic parts.

Package includes:

1 x Transparent Acrylic case
R44.90  Inc VAT
LCD module 3.5 inch TFT LCD display for Arduino UNO R3 Board and supports mega 2560 R3 (Arduino LCD display 3.5inch)
PLEASE NOTE: Arduino board and USB cable are not included

LCD module 3.5 inch TFT LCD screen 3.5 " for Arduino UNO R3 Board and support mega 2560 R3



Watch a video on this item at https://www.youtube.com/watch?v=PAPW97X6IRM
 


Package Includes:
 
 1 x 3.5 inch TFT LCD

View the Wiki pages
R259.90  Inc VAT
LCD Keypad Shield LCD1602 LCD 1602 Module Display For Arduino ATMEGA328 ATMEGA2560 raspberry pi UNO blue screen (buttons blue backlight)
Description
  •     This is a basic 16 character by 2 line display.   
  •     Utilizes the extremely common HD44780 parallel interface chipset.   
  •     Interface code is freely available.   
  •     Blue Backlight with white words.   
  •     uses 4 Bit Arduin LCD Library.   
  •     Size:8cm x 5.9cm - 3.15inch x 2.32inch   


Package Content:

1 X Keypad Shield 1602 LCD

DFRobot WIKI
R69.90  Inc VAT
USB A to USB B Arduino Uno/Mega USB cable 30cm (uno/mega cable 30cm)
Arduino Uno/Mega USB cable 30cm USB A to USB B Blue
R29.90  Inc VAT
Per Page      1 - 13 of 13
  • 1