Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Adafruit Monochrome 0.96" 128x64 OLED graphic display (Ada OLED 0.96" display)

Cables not included

These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display.

This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!

This breakout can be used with either an SPI or I2C interface - selectable by soldering two jumpers on the back. The design is completely 5V-ready, with an onboard regulator and built in boost converter. It's easier than ever to connect directly to your 3V or 5V microcontroller without needing any kind of level shifter!

TheRaspberryPiGuy has done an *excellent* video on getting this display running with your Pi.

Guy Carpenter has a guide for using OLEDs like this one with the Raspberry Pi it's well worth a read!

Using this display with a Raspberry Pi? Check out Adafruit's SSD1306 OLED display guide.

Adafruit have provided a detailed tutorial and example code in the form of an Arduino library for text and graphics. You'll need a microcontroller with more than 1K of RAM since the display must be buffered.

On the Raspberry Pi, Adafruit now have a Python library available that works with these displays in both i2c and SPI mode.

You can download the Adafruit SSD1306 OLED display Arduino library from github which comes with example code. The library can print text, bitmaps, pixels, rectangles, circles and lines. It uses 1K of RAM since it needs to buffer the entire display but its very fast! The code is simple to adapt to any other microcontroller.

TECHNICAL DETAILS

Dimensions:

  • PCB: 38mm x 29mm (1.5" x 1")
  • Screen: 25mm x 14mm
  • Thickness: 4mm
  • Weight: 8.5g
  • Display current draw is completely dependent on your usage: each OLED LED draws current when on so the more pixels you have lit, the more current is used. They tend to draw ~20mA or so in practice but for precise numbers you must measure the current in your usage circuit.
  • This board/chip uses I2C 7-bit address between 0x3C-0x3D, selectable with jumpers

Netduino driver, Netduino sample and documentation. This sample displays bitmaps and animations on the display.

R369.90  Inc VAT
128×32 2.23inch OLED display HAT for Raspberry Pi (WS OLED display hat)

Overview

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.

Trying to add a control interface for your Pi? This compact display would be the ideal choice.

Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Optional interfaces: SPI (default), or I2C, configured via onboard resistor
  • Brings control pins for host boards like Arduino/STM32
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

  • Driver: SSD1305
  • Interface: SPI / I2C
  • Display size: 2.23inch diagonal
  • Display color: white
  • Resolution: 128×32
  • Viewing angle: >160°
  • Power supply voltage: 3.3V/5V
  • Logic level: 3.3V

Interface

SYMBOLRaspberry Pi PIN (BCM)DESCRIPTION
VCC3V3/5VPower input
GNDGNDGround
DINMOSISPI data input
CLKSCLKSPI clock input
CSCE0Chip selection, low active
DCP24Data/Command selection (high for data, low for command)
RSTP25Reset, low active

Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/2.23inch_OLED_HAT

R229.90  Inc VAT
Wemos® Lolin ESP32 + WiFi + Bluetooth Dual ESP-32 ESP-32S ESP8266 OLED Module (ESP32 with OLED display)
Description:
 
ESP32 is already integrated with antenna and RF, power amplifier, low noise amplifiers, filters and the power management module.
An entire solution on the least amount of PCB area. This board is a 2.4 GHz dual mode WiFi and bluetooth chip by tsmc 40nm low power technology, power and optimized RF characteristics for a wide range of applications.
 
Features:
 
High performance
Small volume, easily embeded to other products
Strong function, with the support of lwIP protocol, freertos
Support three modes: AP, STA and AP+STA
Support for lua program, easy to develop

Package includes:

1 x Wemos® Lolin ESP32 OLED Module

R259.90  Inc VAT
Discontinued: 0.96 Inch 128 x 64 OLED Module 4 Pin IC I2C IIC Communication (AW OLED 0.96inch I2C display)
Description
Connector : IIC port
Pins Definition : 1.GND 2.VCC(3.3~5V) 3.SCL 4.SDA
 
Package Includes:
1 x OLED
R106.82  Inc VAT
Yellow blue double colour 128X64 OLED LCD LED Display Module For Arduino 0.96" I2C IIC SPI Serial (OLED display)
Description

Interface type: IIC interface
Pin definition: GND, VCC, SCL, SDA
1:GND(OLED power supply)
2:VCC (OLED 3.3~5V)
3:SCL(OLED IIC Clock line)
4:SDA(OLED IIC Cable)

We used these instructions to get it working on Pi: https://circuitdigest.com/microcontroller-projects/ssd1306-oled-display-with-raspberry-pi

Package Includes:

1 x OLED display
R74.90  Inc VAT
Per Page      1 - 5 of 5
  • 1